ONLINE TENDER DOCUMENT FOR ESTABLISHMENT OF PUBLIC POLICY LAB AT HINDU COLLEGE, DELHI UNIVERSITY AS PER APPROVED DESIGN, LAYOUT and SPECIFICATIONS

Amount

Civil Interior Work

Demolition /Dismantaling work

Cleaning of site

Removing Existing AC & Handling over to Authorities

Removing Existing Electrical Work

Removing Existing False Ceiling work

Removing Existing tile work

Removing Existing Steps near Library door

Removing Existing Doors

Removing Existing Windows

Removing Existing damaged plaster

Clearing Debris from site

Pest control treatment for white ants & Borer

Civil Work

P/Fixing Brick work for the Library doors for closure

P/Fixing Cement plaster on same

P/Fixing 1200x600mm Ceramic tiles for floor as per design & specification [Basic rate of tile 85 rs per sft]

P/Fixing 800x2400mm Ceramic tiles for wall as per design & specification [Basic rate of tile 120 rs per sft]

Gypsum Work

P/Applying POP Punning on wall

P/Fixing Gypsum ceiling as per design & specification

P/Fixing Modular grid ceiling as per design & specifiction [0.55 NRC Armstrong tiles with groove patterened metal frame work]

P/Fixing Gypsum paneling on wall with Stud filled with 50kg density rock wool

P/Fixing Gyproc Plaster on newly constructed walls

Light gala cutting

Speaker gala cutting

Moulding upto 75 mm

Doors/Windows/Glazing /Carpentry Work

P/Fixing Al pipe framed door covered with 12 mm plywood finished with laminate on top covered with beading & filled with50 kg density for sound insulation.The door must have rubber gasket & drop sills & compelte with hardware ready to use [Size of door 800 x 2550]

P/Fixing wooden door frame pf 100x75 mm finished with melamine polish as per design & specification treated for acoustic

P/Fixing Laminate paneling on wall with 50x25 AL Frame filled with 50kg density rock wool covered with 12mm plywood finished with laminate as per design & specification [Basic rate of laminate 1800 rs per sheet]

P/Fixing Back panted glass paneling having 50x25 AL Frame covered with 12 mm plywood having 6mm back painted glass on top [Make Saint Gobain] having 75mm black powder coated AL Skirting

P/Fixing AL Framed partition of 25 x 50mm having members at 600mm c/c filled with 50kg thick rockwool covered with 12 mm plywood finished with laminate having 75mm powder coated AL Skirting & wooden beading at edges

Same as Item no 3 with acoustical panelsas per design

P/Fixing Seating Cocoon having wooden partition all around finished with laminat & filled with 50kg glasswool having cuhioned seating with table & back painted glass [Electrical work will be part of cost,Laminate 1850 rs per sheet & fabric upto 650 rs per mt]

P/Fixing wooden box in ceiling for stretched fabric ceiling finished with laiminate on both side

P/Fixing laminate finish storage cupboard on both side of LED Screen panel as per av design having Powder coated louveres as per design & complete with hardware [Basic rate of laminae 1800 rs per sheet]

P/Fixing AL frame wooden box ready to receive LED Screen along with back painted glass around having 75mm powder coated AL profile skirting as per design & specification

P/Fixing laminate finished C Type pelmet for roller blinds near window

P/Fixing Phone booth finished with laminate on both side having AL profile glass door of 40 x 100mm powder coated section with 10mm toughened glass as per design & specification [Basic rate of laminae 1850 rs per sheet]

Modular Furniture & Chair

P/Fixing laminate finish 900 x 550 mm laminate finish table with modesty & flip up box for wire manager with metal raceway below as per design & specification [Make Monarch or Equivalent]

P/Fixing Standing console finished with laminate as per design

P/Fixing Modular workstation of 1500 x600mm as per design & specification [Make Monarch or equivalent]

P/Fixing cushioned seat & net back chair with gas pump & one position lock as per design & specification [Make Monarch or equivalent]

Painting Work

P/Fixing Plastic Paint on ceiling

P/Fixing luster Paint on wall

Cleaning of site

Miscellenous

P/Fixing MS Stand as per design to create levels of seating covered with 12 mm plywood on top as per design & specification

P/Fixing artificial green wall as per design & specification

P/FIXING SIGNAGES & LOGO IN pu coated acralic as per design

Design and consulting fees

Architectural Consultancy

PANEL & DBs

Supply, Installation, Testing & Commissioning of Following Panels as per below specs. Floor/wall mounted cubicle type panel, Fabricated from 14/16G CRCA sheet steel ,Totally compartmentalized, 7 tank powder coating treatment for rust proofing, with separate busbar chamber & cable chambers ,Front /Back access for switchgears, connectors etc.Suitable for 430 V, 3 phase / 4 Wire System , 50 Hz supply,50 Deg Celcius ambient temp,Class 1 Type with 15VA burden, Provisionn for control wiring diagram, 3 MM openable gland plate on top and bottom of panel, 75 MM height channel base frame to panel. Proper labeling shall be done all chambers of panel showing feeder rating and location

UPS OP PANEL 100 A 1P MCB 16kA- 1 nos- CU busbar- 100 A 2P 20A SP MCB- 20 nos

25A 2P MCB and industrial socket

CABLE & WIRING : LT XLPE FRLS CABLES-SITC of Aluminum / Copper armoured XLPE ,FRLS Grade PVC Insulated cables as per IS 1554 to be fixed to walls, ceilings, on trays with suitable GI clamp, cable tie at every 450 mm or to be laid in ready-made trench . Cable tagging shall be done at both the ends of cable. Arrow marking shall be done at panel end to show flow direction of current.

4 Core 16 sq. mm. A2XFY XLPE

4 Core 10 sq. mm. A2XFY XLPE

4 Core16sq. mm Cu Arm YWY XLPE

4 Core10sq. mm Cu Arm YWY XLPE

3 Core 16sq. mm Cu Arm YWY XLPE

3 Core 4.0 sq mm Cu YWY XLPE

1cx 35 sqmm cu flex frls cable with FRLS pvc pipe

3.5c x 150 sqmm Alu arm frls cable

SITC of cables with Heavy duty Alu/ Cu. Lugs & Brass cable glands. All Cable should be Double compression gland for 16 Sqmm and Above cables.The glands should be earthed along with brass clips for Earthing.Bimetallic washers shall be utilise for Aluminium cables for terminations with cu busbar.

4 Core 16 sq. mm. A2XFY XLPE

4 Core 10 sq. mm. A2XFY XLPE

4 Core16sq. mm Cu Arm YWY XLPE

4 Core10sq. mm Cu Arm YWY XLPE

3 Core 16sq. mm Cu Arm YWY XLPE

3 Core 4.0 sq mm Cu YWY XLPE

1cx 35 sqmm cu flex frls cable with FRLS pvc pipe

3.5c x 150 sqmm Alu arm frls cable

SITC of 1.6 mm thick GI Perforated type cable Trays of Asian /Profab / Equivalent make The cable tray shall be fixed to the ceiling/ wall with suitable size of GI clamp, appropriate dia threaded rod & 35mmx2mm thick GI slotted 'C' channel Patti OR suitable size of MS angle support (MS support to be painted with two coats of red oxide & two coats of enamelled paint ).Supports to be provided at an interval of 800mm or lesser depending upon the location. The rate shall include the cost of GripleSupports/ GI rods and MS angle support .

Cable Tray=100mm wide x50 mm height. IBMS works, DATA works, Electrical works in passage

Cable Tray=150 mm wide x50 mm height. IBMS works, DATA works, Electrical works in passage

Cable Tray=200 mm wide x50 mm height. IBMS works, DATA works, Electrical works in passage

Cable Tray=300 mm wide x50 mm height. Electrical works, IBMS , data inside shaft works

SITC of Powder coated 100mmx 75mm GI Trunking 2mm thick with cover to be used for running the wires/cables near Db and DB drop. Trunking to be fixied on Wall or flooring with suitable size of GI clamp, appropriate dia threaded rod & 35mmx2mm thick GI slotted 'C' channel Patti OR suitable size of MS angle support (MS support to be painted with two coats of red oxide & two coats of enamelled paint ). The rate shall include the cost of Supports . Trunking should have knock outs on both side at each 600mm distance as per site requirents.

SITC of Light Point wiring through 20/25 mm FRLS PVC CONDUIT with all required accessories with 2 Nos of 1.5 sqmm & 1 no of 1.5 sqmm ( for earth) PVC insulated Copper FRLS wires with Modular type switches complete with all accessories as detailed in the specifications. The switch boxes shall be flush mounted with partition /walls works or as directed by the consultants and shall be done in co-ordination with furniture works. The rate shall include 5A switch, faceplate with back box and wiring from SB to light points with 2 Nos of 1.5 sqmm & 1 no of 1.5 sqmm ( for earth) Copper conductor PVC insulated FRLS Wire , conduit, back box, switch plate and modular type switch included in point . Conduit shall be fixed on wall / trays or ceiling with spacers & saddles. The wires will be terminated in a separate connector before fixtures. All phase neutral and earthing wire shall be terminated in SB level. No direct looping of Neutral and earthing shall be done. All circuit/ Looping circuits shall be measured as per meter . contractor shall provide ferrule on both ends and shall have lugs on both end. Circuit and point wire shall have same colour code. Switch board have proper stickering showing DB and circuit number. wall chasing and back filling will be in scope of electrical contractor wherever required

Primary light points (Switch control) 3 x 1.5 Sqmm Cu FRLS PVC insulated wires- Switch to first light point including 5A switch

Secondary light points with 3 x 1.5 Sqmm FRLS wires PVC insulated wires (Loop points after primary points)

DB MCB controlled primary point with 3 x 1.5 Sqmm Cu FRLS PVC insulated wire- circuit wiring from MCB to first light point included

Secondary light points with 3 x 1.5 Sqmm Cu FRLS PVC insulated wire (Loop points after MCB controlled primary points)

Wiring for PIR sensor from cabin SB to sensor and till first light point

Primary light points (Switch control) 3 x 1.5 Sqmm Cu FRLS PVC insulated wires for emergency lights-Switch to first light point including 5A switch

Secondary light points with 3 x 1.5 Sqmm Cu FRLS PVC insulated wires .for emergency lights

DB MCB controlled primary point with 3 x 1.5 Sqmm Cu FRLS PVC insulated wires .for emergency lights-circuit wiring from MCB to first light point included

Secondary light points with 3 x 1.5 Sqmm Cu FRLS PVC insulated wires .for emergency lights

3R x 1.5 sqmm Cu frls wires in FRLS PVC pipe with all required assesories for normal and Emergency circuit wiring only for switch control points

POWER OUTLETS

Supply, Installation , Testing & Commissioning of following Power Sockets mounted with specified switchgear inside the specified enclosure confirming to .The rate to include termination of incoming wires/cables with appropriate size of lugs & applicable PVC/Brass cable glands

Supply & Fixing of RG 6 TV socket with Approx 35 Mtrs cable in pvc conduit

SITC of modular type shuttered power sockets, data-outlets, telephone sockets complete with chrome-plated mounting box. The switch box shall be fixed in partition works. The rate shall be inclusive of connecting of switches / sockets. . Proper care tobe taken while passing wires from bends, wire enrty from floor JB to modular, bends in module. Contractor shall used PVC Sleeves to avoide damage of ware. All sockets shall have label with DB and circuit number. All main circuits shall have numbered ferrules. All circuit and looping wire color code shall be same.

2 Nos of Universal sockets 6A round pin sockets controlled by 6A switch (for UPS Power) for workstations / BMS. Double cover type face plate with back box

1No. of 5A Switch & 5 A Universal sockets combine for with back box for workstation raw power.Double cover type face plate

1 Nos of sockets 6A sockets controlled by 6A switch Power Switch Socket combine with indicator Complete with G.I. mounting box for VAV Boxes, FCU , AV points, Low voltage equipments.

1 Nos of sockets 16A 3pin controlled by 16A switch Power Switch Socket combine with indicator complete with G.I. mounting box for Convenience sockets. Double cover type face plate

25 A 3pin IEC tempra sockets for rack/ screen with male and female connector and box

Back boxes required for data voice outlets boxes on wall or partitions

SITC of Circuit Mains wiring for work station and cabins Power sockets direct from DB and then looped with nearest socket .

Circuit wiring - 3C x 2.5 sq.mm. Cu conductor PVC insulated FRLS wires for UPS points on table , workstaion, cabin furniture - UPS-4 points per circuit

Circuit wiring - 3C x 2.5 sq.mm. Cu conductor PVC insulated FRLS wires for RAW points on table , workstaion, cabin furniture - RAW-8 sockets per circuit

Circuit wiring - 3R x 2.5 sq.mm. Cu conductor PVC insulated FRLS wires in 25 MM FRLS pvc conduit in ceiling, partitions, floor for RAW points , UPS points

Supplying and laying of CAT-6 cable make through already laid raceways/conduit from racks to work station as directed (The rate shall include the cost of 1.6 mm wall thickness PVC conduits & all accessories) for light dimming

Circuit wiring - 3C x 6 sq.mm. Cu conductor PVC insulated FRLS wires for UPS points -

MISCELLENOUS WORK

This item is inclusive of making necessary temporary arrangement lighting with fixtures to attain a minimum 200 Lux lighting level for area of 1500 Sqft Floor & provision of substantial number of power points for welders ,carpenters, electricians & others . The supply should be routed through MCB DB having ELCB of suitable rating. Cost of energy meter at main incoming to be considered (if required by client).Contractor to provide multiple DBs & services being multiple services. This items includes cost of supply & installations of main DB with energy meter,Small DBs at each levels, Its cabling,Temp wiring for Lighting fixtures & Power sockets. Lighting Fixtures, Power sockets ,required hardware & associated material.Also vendor shall maintain the same till completion of project. All temp light material shall be removed and taken back by electrical contractor.

SITC of 1Cx 6 sq mm COPPER flexible cable for earth along with the supply cable in 20mm PVC HMS Conduit

SITC of 1C x 2.5 sq mm COPPER flexible cable with for earth along with brass clips for termination

Item no.8 to 14 The rate shall inclusive of Termination at Both Ends.

Supply installation testing and commissioning of earth pit comprising of specially designed Ashlok/''SEE' brand Earth Electrode system 3.00 meter long- 50mm dia GI electode and 50KG chemical compound for each earthing including necessary materials like side fill compound etc. as required with standards brick masonary chamber with hinged cover and watering arrangement model SEE-60/C with SFC-20/Equivalent

Supply,installation,testing & commissioning of copper earth bus of size 25 mm x 3 mmx 600 mm ( WxBxL) mounted on insulators ,in suitable size MS Powder Coated box ( Acrylic to be provided on front cover to view termination ). Bus should have 10 nos of holes with brass nut bolts of suitable size

SITC of Following sizes of Earthing bare conductor wires with clamps,/saddles /brass clips etc. 8 SWG GI Wire for AC earthing and outdooe USE

RACEWAYS & WIRING- Floor preparation for raceway laying-Raceways / conduits shall be fixed to the flooring with GI clamps for finished levels as per the site conditions or through partitions with all accessories. The rate shall include preparation of trenches upto 450 mm wide by carefully removing the floor tiles / IPS & malwa below the tiles for laying Raceways/conduits . The depth of the trenches shall be at least 2 inches from the finished floor level or upto RCC of the slab. The rate shall also include the activity of clearing the debris generated at designated area by PM .(Breaking and back Filling the same with PCC 1:2:3 with metal wiremesh not part of electrical contractor scope. Contractor shall take prior permission before execution of this work wherever required)

Supply and laying Raceways / Conduits Raceways / conduits shall be fixed to the flooring with GI clamps for finished levels as per the site conditions or through partitions with all accessories. Raceway and JB shall be closed properly with plastic bags to avoid entering of cement mortar. All JB and raceway tobe earthed at each contact point and at DB level with 16 SWG cu wire.

100mm x 38mm Aluminium raceways, 1.6 mm thick

25mm PVC conduits of wall thickness of 2 mm thick

Junction Boxes

Supplying and fixing 250 mm x 250 mm x55mm deep GI finish. The junction boxes shall have knock-outs on all sides suitable for Raceways/conduits. With stainless steel Plate. The knock out shall be removed at site as per requirements. Junction boxes shall be leveled at the time of installation. Juctions boxes shall be earthed with raceway with 18 Swg cu wire. Junction boxes and raceway shall be covered with plastic bags during back filling of concrete work.

Supplying and fixing 150 mm x 150 mm x55mm deep GI finish. The junction boxes shall have knock-outs on all sides suitable for Raceways/conduits. With stainless steel Plate. The knock out shall be removed at site as per requirements. Junction boxes shall be leveled at the time of installation. Juctions boxes shall be earthed with raceway with 18 Swg cu wire. Junction boxes and raceway shall be covered with plastic bags during back filling of concrete work.

Supply & installations of MS Powder coated sheet steel, Raceways in red or blue in colour made of 1.6 mm thk, with removable top cover & knock outs of 25dia mm at every 300mm for entry/exits of cables , complete with couplers, bends etc. The raceway shall be fixed to the flooring with 40 x 40 mm x 4mm GI angle bracket with required hard ware such as anchor fasteners threaded rods, clamps etc.This management should be sufficient enough to cater the fixing & removal force of 32amps IP 44 socket. Additional support for each socket to be considered in the rate.. The brackets/Straps shall be spaced at 500mm apart & on either sides of bends.(TO BE USED ONLY FOR THE NETWORK ROOM & HUB Room & Server room)

100mm wide x 50mm ht 1.6 MM Thick with cover

300 x 75 MM GI perforated tray for data cable tray with cover

SITC of High end Switch sockets for lighting SB and 5/15A Raw points in directors cabin and conf room, basic cost taken for plate switch sockets combine taken rs. 5000 per room

FLOOR BOX-300x 300 mm Floor boxes with 2 x 15A power points with SS cover removable type, flush to flooring

Fire Extingushers 4.5KG Co2

Fire Extingushers 2 KG ABC

Fire Extingushers 2KG Clean Agent

Fire Extingushers - Ceiling suspended Auto fire extingusher- 5 KG

Decorative lights

Stretched Fabric ceiling light

LED cove lights- 10W / Meter with required driver set

LED Tube lights- 4 feet

COB lights 18 W

25W down lights

A) IP CCTV System Approved make: HIKVISION , cable: TYCO/ SYSTEMAX

SITC of 2MP IP BASED dome camera/ Network camera, equipped with a 1/3″ progressive scan CMOS imager to capture 2304×1296 (20 fps)/Full HD 1080p (25/30 fps) images; a 3.6mm mm fixed lens; and a waterproof (IP66) enclosure, true day/night solution, camera shall use Smart IR technology and provide up to 100 ft (30 m) of IR illumination, 12 V DC power input. vendor to include camera mounting back box and MS fixing bracket 6 -8 feet long x 20mm rod from slab/ wall bracket with all required supports and fixing hardware

SITC of 8 CH NVR,2 SATA HDD Slot (2 x Max 8 TB), ATX Power,Realtime Recording Resolution (8 Channels @4 MP),Realtime Local Playback,Multiplex Operation,H.264 High profile,BNC/VGA/HDMI output, main profile, baseline,HDD Redundancy,Free DDNS,Network backup, USB HDD, USB writer, SATA writer,1 RS485, support 18 kinds of PTZ protocols,ONVIF 2.0,1 channel Audio Input and Output,8 Ch Alarm Input and 16 Ch Alarm Output- Free software supply and installation . 2 SATA HDD slots NVR shall be network compatible and remote access shall be available through IP

6TB HDD

8 port PoE network Switch

Cat 6 cable in FRLS PVC CONDUIT- Quote all inclusive rate for cable + conduit+ IO + Box + patch cord+ crimping on both the ends

6U rack for POE switch

24 INCH LED SCREEN

B) ACCESS CONTROL SYSTEM

Supply, installation, testing & commissioning of Finger + CARD readers with cat 6 connectivity as per specification suitable for mounting on Gypsum/metal surface/metal frames or wooden frames/ wall or as required based on site conditions including all accessories and civil works for attendance system

Supply, installation, testing & commissioning of Proximity card readers as per specification suitable for mounting on Gypsum/metal surface/metal frames or wooden frames/ wall or as required based on site conditions including all accessories and civil works.

Supply, installation, testing and commissioning of electromagnetic Lock (fail safe type) of 600lb holding force, with Door Feedback & door ajar alarm buzzer for the following type doors : Locks shall be suitable for Glass door with U clamps

Double leaf Door

magnetic contacts

SITC of 2 door controller with TCP/IP connectivity, & power supply unit with battery back up

8 c x 1.0 Sq.mm for locks and exit switch

C) NETWORK BOQ- LOW SIDE WORKS ONLY Data: 50, Voice: 4, WIFI: 4, Note: Cabeling routing, installation ,terminations, testing included in cabeling vendor vendor scope Vendor to include cable tie, ferrule, welcro tapes in cost of cable, Make: SYSTEMAX/TYCO

SITC of Data /Voice Cabling BOQ

Cat-6 UTP Cable - 305 mtrs per box

Cat-6 Information Outlet

1 port face plate

2 port face plate

4 port face plate

Network rack side installation work

24 port jack panel with IO- single for data double for voice

21 U rack with power strips and assesories

Testing and certification

D) UPS System

SITC 20 KVA online IGBT BASED UPS with 15 min battery back up on full load SMF BATTERY , 3ph input and 1 ph output. Including battery rack, battery links , battery isolators, ups to battery cables and terminations etc. INCLUDE REQUIRED CABLE AND HARDWARE.BMS CARD Provisional -LED touch screen display required for UPS, UPS shall give alarm sound and LED light alarm on fault case condition, include PRS card and BMS card with cable works. UPS shall have inbuilt protections againts voltage and current sprikes / Surges

E) Fire Fighting System Note- Vendor shall include cost of integration with BMS, Access, PA and Elect system. All cables and hardware required for the same.

SITC of Addressable Smoke detector with base with Binary coded address setting. Dual LED’s for 360° visibility. Sleek low-profile housing design. Regular 100mm (Below false ceiling) base. IP Rating : IP - 42. Approval: UL Listed,

SITC Addressable Manual Pull Station - Single Action -

SITC of Addressable Monitor Module/ control module- Approval:

SITC Addressable Relay Module. Approval: UL Listed,

SITC Sounder / Hooter with Strobe with minimum Db level of 90db at 10 feet height with required control module

SITC of Response Indicator indicator having twin LED flush mounted on false ceiling/wall

SITC of 2 Core x 1.5 mm2, Multistranded AT Copper, FRLS Armoured cable, RED in Colour. The cable shall be laid on surface with GI saddle-spacers every 0.3 meters. Complete with GI Junction Box, lugs, cable glands, cable tags and Ferruling as required.

SITC of Response Indicator indicator having twin LED flush mounted on false ceiling/wall

SITC of 2 Core x 1.5 mm2, Multistranded AT Copper, FRLS Armoured cable, RED in Colour. The cable shall be laid on surface with GI saddle-spacers every 0.3 meters. Complete with GI Junction Box, lugs, cable glands, cable tags and Ferruling as required.

A) LOW SIDE HVAC WORKS

INSULATED REFRIGERANT PIPING

Copper Piping for VRF SYSTEM

Supply, installation, testing & commissioning of refrigerant copper piping & joints connected between evaporator unit & condenser units covered with 19 MM Nitrile foam insulation.Class O to be considered.

Supply of refnets to provide control of the flow of refrigerant to the indoor units.

INSULATED HARD PVC DRAIN PIPING FOR VRF SYSTEM

Supply and installation of Condensate Drain Water piping constructed out of PVC / HDPE hard pipes, fitting, accessories, bends, elbows, tees, flanges, tappings, wall sleeves, hangers, supports, anchors. The pipes to be duly insulated with 10 mm Nitrile rubber insulation .

25 mm Dia

32 mm Dia

CHARGES FOR THE INSTALLATION,TESTING & COMMISSIONING OF ODU unit 16 HP

CHARGES FOR THE INSTALLATION,TESTING & COMMISSIONING OF FOLLOWING ITEMS-POWER CABLE FOR ODU UNIT

Supply and Installation of Power Cable for ODU

CHARGES FOR GAS CHARGING OF FOLLOWING ITEMS-ODU UNITS.

Refrigerant gas charging in ODU

CHARGES FOR THE INSTALLATION,TESTING & COMMISSIONING OF FOLLOWING ITEMS-IDU UNITS

Installation of VRF FCU units with Cordless remotes

Supply & Installation of indoor hanger

CHARGES FOR THE INSTALLATION,TESTING & COMMISSIONING OF FOLLOWING ITEMS-COMMUNICATION CABLE FOR IDU UNITS

Supply and Installation of copper Communication cable for communication between the IDUs

CHARGES FOR THE INSTALLATION,TESTING & COMMISSIONING OF FOLLOWING ITEMS-POWER CABLE FOR IDU UNITS

Supply and Installation of Power for communication to the IDUs

Installation of 3 pin top with power cable

CHARGES FOR THE INSTALLATION OF FOLLOWING ITEMS-MS STAND FOR ODU UNITS

Supply and installation of ODU with Galvanised with enamel painted framework

Loading & unloading , Transportation & Mathadi Charges

B) HIGH SIDE HVAC WORKS CARRIER MAKE

OUTDOOR UNIT

Supply of 16 hp Top Discharge Outdoor Unit

INDOOR UNIT

Supply of 2TR 1 way Cassette Indoor Units 2 TR (2.5 hp)

AUDIO VISUAL EQUIPMENT

Cable cubby on table - MAKE- Extron, Crestron, Lightware, SUGGESTED MODEL - FT1-500-MECH-PTL-B + FT2A-PWR-UN-1-BASIC + FT2A-CHGR-USBA-BASIC + FT2A-PLT-PT-10 , SPECIFICATIONS :- 1) SITC of Cable Management solution for conference tables or presentation lecterns, highly configurable for multiple connections. 2) Should have neat, clean, and Aesthetic design and no visible screws. 3) It should have lid which opens and hides so that all the cables are visible for use. Also, lid should have pass-through which allows cables to be fully extended while the lid is closed. 4) Should have minimum slots as per to the below connection requirement. 5) Should be supplied with 2x Universal Power, 2x USBA charging, minimum 3x passthrough holes for running AV cables. 6) Any required accessories should be included in this only. 7) Should comply to CE, UL, FCC. (Additional BIS to be shared if applicable)

Windows Based MTR Codec System

1) Supply Installation Testing and commissioning of AV Control processor for controlling audio, video, sensors, and security systems as per site requirement. 2) Supplied controller should be able to run two different programs to control two rooms simultaneously (Additional Hardware can be added to meet the requirement) 3) Should have minimum 2 GB RAM, Flash 8 GB & External Storage Supports up to 1 TB to load files and processing. 4) Should have minimum 1x Bidirectional RS-232/422/485 port, 2x Bidirectional RS-232 port, 8xIR/1-way serial, 8x relay supporting 1A, 30VAC/VDC, and 8x digital IO ports, 2x LAN port (1x main, 1x Subnet). 5) Should support BACnet communication protocol from day one, for providing direct interface to third‑party building management systems over Ethernet, simplifying integration with HVAC, security, and other systems. (Additonal hardware can be added to meet the requirement). 6) Control processor & Touch Control interface should be from same OEM, and must not require any internet connectivity for configuration, programming and running. 7) Should have ethenet port supporting 1000 Mbps, industry-standard TCP/IP, UDP/IP, SFTP, DHCP, SSL, FIPS 140-2 compliant encryption, SNMP, IPv4, IPv6 & SMTP. 8) Should support industry standard minimum security features and protocols using Active Directory® credential management, 802.1X authentication, TLS, SSH, and HTTPS. 9) Should comply to CE, UL, FCC & BIS.

10" Touch Panel for AV Control- MAKE- Extron, Crestron, Lightware, MODEL-TST-1080

Occupancy Sensor- Extron, Crestron, Lightware MAKE, MODEL - CEB-ODT-C-POE + PWE-4803RU

SITC of Ceiling-mounted occupancy sensor for integration with Room Scheduler for automaticaly spot ad-hoc room booking, and release the inactive Rooms. Should also be connected to AV Control system for automation. Ceiling-mounted occupancy sensor should support Passive infrared (PIR) motion detection & Ultrasonic for precise sensing. Sensor having Coverage Pattern of 360 degrees supporting 2,000 sq ft coverage area Should be able to powered via PoE+ only for remote powering.

Windows Based MTR Codec System- MAKE- Extron, Crestron, HP, Poly, MODEL- UC-CX100-T

1) SITC of customizable video conference room solution for use with the MICROSOFT TEAM Rooms intelligent communications platform. 2) It is preferrable to convert native Teams room to native Zoom room system if the platform of user changes. 3) The collaboration hardware / codec provided should support Windows® 10 IoT Edition OS, 100/1000 Mbps Ethernet connectivity, minimum dual displays output and 10" Tabletop touch screen. 4) Tabletop Touch interface should be powered over ethernet for 24x7 use and which will be used for controlling the Microsoft Team calls and flexible room controls. 5) This hardware should enable integration with your choice of displays, cameras, speakers, microphones, mixers, switchers, and audio-conferencing interface (or speaker phone) 6) Engine should have 2 x output to be connected to 2 displays, 1 Input for sharing wired content during the call, USB 2.0 and 3.0 supported multiple ports for accessories connectivity like camera, DSP, speakerphone etc. 7) The touch screen offered with this package should be able to operate Microsoft Teams Room call Control features, also provide control of room lighting, shades, thermostats, and other equipment used in addition with the control system. It should also have USB-C port and USB-A port for BYOD / BYOM / USB Passthrough feature built in for users to use their own UC conference platform from laptop without rebooting the device. 8) Package should be provided with necessary required cables, converters, POE, additional accessories, and components to be included to meet the said functionality. 9) It should support IEEE 802.1X, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), password login, HTTPS secure provisioning, IEEE 802.3at compliant. 10) Should comply to CE, UL, FCC, ROHS. (Additional BIS to be shared if applicable) 11) Should be Microsoft Teams certified Hardware

AV Over IP Transceiver- MAKE-Extron, Crestron, Lightware, MODEL- DM-NVX-384 + PW-2420RU

AV Over IP Network Switch- MAKE-Cisco, Netgear, HP, MODEL- CEN-SWPOE-48

Supply installation testing and commisioning of 48 port AVOverIP configured managed Ethernet switch. Should have minimum 40x 1000Base-T Gigabit Ethernet RJ45 port that provides PoE+. Should have minimum 8x 10 Gigabit Base-X SFP+ ports enable use of transceiver modules to connect to a fiber network. Should provide minimum 950W. Should support Layer 2 & Layer 3. Switch Fabric 240 Gbps non-blocking, IGMP Support, LLDP Support.

Presenter Camera - MAKE- Sony, Crestron, Aver MODEL- IV-CAM-120-B+PW-1225DU+IVA-CMT-BRKTJ-1B-B

Supply Installation Testing and commissioning of intelligent 20x PTZ Camera supporting minimum below parameters: 1) Technology: Intelligent PTZ camera with visual AI for presenter Tracking Capability. 2) Camera movement: Automatically pans, tilts, and zooms using dual camera technology 3) Optical Zoom: Minimum 20x 4) Image Sensor: Minimum 1/2.8 Sony CMOS Sensor or better 5) Focal Length: F=5.2-94 mm 6) Video Format: Minimum 1080p60 7) Video Outputs: 3G-SDI, HDMI®, USB, ONVIF, RTSP, NDI 8) Shutter Speed: 1/50-1/10,000 sec 9) Illumination: 2 lux 10) FOV Reference Camera: Horizontal: 104° & Vertical: 57° 11) FOV Main Camera: Horizontal: 56° & Vertical: 40° 12) Dual camera design: Wide angle reference camera & the PTZ Main camera 13) Control: VISCA/TCP, VISCA/UDP, PELCO-D, PELCO-P, ONVIF 14) Minimum 1x RS-485 port for controlling. 15) Visibility Indicator: Should have bicolor LED, to show device activated and standby mode 16) Reset: Hardware reset 17) Power: PoE Powered 18) Presenter Tracking: Able to track group of presenters with option to add blocking zones (display, doors, glass openings etc) to avoid false tracking. 19) Compliance: CE, FCC, IC (BIS to be shared additionally, as applicable) Camera & Camera switching solution should be from one manufacturer only, to avoid any complatibility issue and meet the room functional as per requirement and user requirement.

Audience Camera, MAKE- Sony, Crestron, Aver, MODEL- IV-CAM-P20-B+PW-1225DU+IVA-WMT-BRKT-1B-B

Supply Installation Testing and commissioning of 20x Optical Zoom PTZ Camera supporting minimum below parameters: 1) Minium Optical Zoom: 20x. 2) Focal Length: F=5.2-94 mm. 3) Field of View: Horizontal: 56° & Vertical: 40° 4) Image Sensor: Minimum 1/2.8 Sony CMOS Sensor or better 5) Video output resolution: Minimum 1080p60. 6) Video Outputs: 3G-SDI, HDMI, USB, ONVIF, RTSP, NDI 7) Shutter Speed: 1/50-1/10,000 sec 8) Minimum Illumination: 2 lux 9) Control: VISCA/TCP, VISCA/UDP, PELCO-D, PELCO-P, ONVIF. 10) Minimum 1x RS-485 port for controlling. 11) Visibility Indicator: Should have bicolor LED, to show device activated or standby mode 12) Camera mount to be supplied with the hardware. 13) Mount supplied must have adjustable swivel head that can position the camera at a desired angle to capture the optimal view of participants during installation. 14) Compliance: CE, FCC, IC (Additional BIS to be shared if applicable) 15) Power over Ethernet. Camera & Camera switching solution should be from one manufacturer only, to avoid any complatibility issue and meet the room functional as per requirement and user requirement.

Broadcast style Camera Switching Solution, MAKE- Sony, Crestron, Aver, MODEL- IV-SAM-VX2-P

1) Supply Installation Testing and commissioning of Voice-Activated, Multi-Camera Switching Solution for large and complex area with broadcast-style experience. 2) Camera switcher should be able to get the location of the active speaking participant in the room from Mic/DSP and automatically trigger the camera switching and movement without the need of control system. 3) Switching between the people sitting inside the room must be clean, clear shots without blur image or blackout to provides a more engaging experience for remote participants. 4) Camera switcher should support multiple layout scenarios including the conversation mode thereby showing two active speakers simultaneously to the far side based on the room requirment and without the need for re-programming. 5) Should be able to combine multiple camera sources, superimpose multiple titles and also able to add logos, titles, custom graphics background. 6) Should have proper algorithm builtin which can follow the conversation and avoiding excessive camera switching. 7) Camera switching solution must also support control via control system for auto-switching and change room configurations and layouts. 9) Should have tool which provides the ability to design and configure spaces and simulate to help choose the best position for a variety of cameras and microphones within a room before deployement. Same file to be uploaded on camera switcher for automatic configuration. 10) Ports 2x RJ-45 Gigabit Ethernet, Video inputs 3x HD-SDI Inputs & 12x NDI Inputs, Video outputs at 1x HD-SDI. 12) Should be compatible and tested with major DSP & Mics OEM's. 11) Should havee minimum 2x Mini DisplayPort™ output for setup and maintenance.

Wireless Presenter with Adapter, MAKE- Extron, Crestron, Barco, MODEL- AM3-212-I KIT

1) Supply Installation Testing and commissioning of secured 4K wireless presentation device having 1x HDMI Input, 1xHDMI output & stereo line-level audio output. 2) User should be able to present content via OS Supported Apple iOS, Android, Windows 8.1 or higher, Windows 10, macOS, Chrome OS, Miracast™ screen mirroring technology. 3) Able to view minimum four content side by side on the single screen and Device should have HDMI Output port supporting HDCP 2.2, EDID, CEC & multiple USB port for connecting peripherals. 4) Should have ethernet port supporting 100/1000 Mbps, TCP/IP, UDP/IP, DHCP, SSL, SSH, IEEE 802.1x, Active Directory authentication, HTTPS. 5) Standard network security protocols, including 802.1x network access control, AES content encryption, to protect privacy and ensure compliance with your organization’s IT policies. 6) Video out resolution up-to 4k 7) Device should have 1x RS-232 bidirectional & 1x IR port for third party device control. 8) Should be able to create separate guest network for data sharing. 9) Should be shipped with 8x USB Dongle for wireless 4k content sharing, without downloading any application, without running OEM app, without plugin, for external guests. 10) Supplied 1xUSB dongle must have 2xbuttons on it, where one will be used for sharing content and second button to enable the wireless conferencing feature when required. 11) Should support Wifi 6 communication between 1x USB dongle and wireless presenter hardware. 12) Should be supplied with 2x holder, which can hold all the 8 adapters. 13) Should comply to IC, CE, FCC (Additional BIS to be shared if applicable)

Room Scheduler, MAKE- Extron, Crestron, MODEL- TSS-1070-B-S-LB-KIT + TSW-770/1070-MSMK-ANG-B-S

1) Supply, installation, testing and commissioning of 10 inch Scheduling Panel, with Multi surface mounting kit (To be mounted on glass/wooden/wall/Plain surface) along with room availability light indicator. 2) Should support scheduling applcation like Microsoft® Exchange, Office 365™, Google Calendar™,Zoom Room, Microsoft Teams Room Panel, 25Live®, EMS, NFS, and Ad Astra® 3) Should have 1xUSB 2.0 host for connecting Light bar. 4) Scheduling panel should be TFT active matrix Colour LCD, 10 in. diagonal, with 1920x1200 pixels resolution. Aspect ratio of 16:10/16:9, Brightness: 400 nits (cd/m²), Contrast: 1000:1 and Should have minimum viewing angle of ±80° horizontal and ±80° vertical or better. 5) Should have ethernet port supporting TCP/IP, UDP/IP, DHCP, SSL, IPV6, TLS, SSH, IEEE 802.1X, SNMP, HTTPS web browser setup. 6) Should have built-in /external proximity sensor for automatic wakeup screen, and automatic brightness controls for optimal visibility. 7) Should have option to connect to network over LAN as well as Wi-Fi. 8) Should support 802.1X authentication, TLS encryption, HTTPS connectivity, and Active Directory® service integration to protect network against malicious intrusions to comply to organization’s network policies. 9) Should comply to CE, UL, FCC, (Additional BIS to be shared if applicable)

DALI Interface for Light control, MAKE- Lutron, Crestron, MODEL- DIN-DALI-2

Supply, Testing and Commissioning of Dali Dimming Modules -2 independent DALI links with control up to 128 individual DALI ballasts/driver per module. with LAN PoE and USB connector. Should be shipped with software/app for configuration of ballast properties, groups, and scenes. Should be able to control DALI type 8 devices as well. Should be compatible with central control system. Should be CE compliant.

High voltage relay interface, MAKE- Lutron, Crestron, MODEL- DIN-8SW8-I

1) Supply, installation, testing and commissioning of High Voltage Relay array, 2) Should have 8 channels of power switching or more, with Built-in 8 voltage-driven isolated digital inputs, or provide an external digital input port. 3) Should Support for 120 to 240 Volt 50/60 Hz lighting and motor loads, 4) Should support Per Channel 10 Amps incandescent, 5 Amps fluorescent, 0.5 HP at 120 to 240 Volts AC, 50/60 Hz; 5 Amps at 30 Volts DC; 16 Amps Resistive or more, 5) Total Module should support 80 Amps incandescent, 40 Amps fluorescent at 120 to 240 Volts AC, 50/60 Hz or more. 6) Should be capable of communicating with central control system, The unit should be addressable so that multiple units of same kind can be controlled via single communication port in a control system.

Power Supply Accessories, MAKE- Lutron, Crestron, MODEL- DIN-PWS60 Supply, Testing and Commissioning of DIN Rail mount 60 Watt Power Supply for powering up keypad, relay module etc. Should be CE compliant.

3 Feet HDMI Cable-MAKE- Extron, Crestron, Lightware, MODEL- CBL-8K-HD-3

SITC of gold-plated HDMI cable of minimum 3 Feet Should support 4096x2160p@60 Hz 4:4:4 video & 22 Gbps bandwidth HDCP 2.3 compliant Should be CE compliant

6 Feet HDMI Cable, MAKE- Extron, Crestron, Lightware,, MODEL- CBL-8K-HD-6

SITC of gold-plated HDMI cable of minimum 6 Feet Should support 4096x2160p@60 Hz 4:4:4 video & 22 Gbps bandwidth HDCP 2.3 compliant Should be CE compliant

CAT7 Cable 500 Feet Spool, MAKE- Extron, Crestron, Lightware, MODEL- Extron, Crestron, LightwareSP500

SITC of CAT7 shielded twisted pair (S/FTP) cable for AV distribution, 500 feet or more. Should be able to transport 4K60 4:4:4 video signals at distances of 330 ft (100 m) Should meet industry standard of less than one pixel error per billion. Delay Skew: ≤25 ns / 95 m Conductors: 22 AWG solid bare copper, Insulation: Foam PE: Shield (per pair): AL foil Characteristic Impedance: 100 Ohms nominal Should be UL, IEC, certified

CAT Connector of AV, MAKE- Extron, Crestron, Lightware, MODEL- DM-CONN-ULTRA-PLUG-20

SITC of connectors for CAT7 STP cable for AV distribution. Should be compatible with CAT7 cable Should supply minimum 140 connectors. Should support Wiring Standards like T568A & T568B Should be UL, RoHS, IEC complaint

Specialised Tool for AV Cat cable, MAKE- Extron, Crestron, Lightware, MODEL- DM-CRIMP-ULTRA-PLUG

SITC of specialised termination tool for AV CAT cable and connector, preferable, should be from same OEM of CAT cable to avoid any issues during installation.

Gooseneck Microphone, MAKE- Sennheiser, Clock Audio, Rode, MODEL- MEG 14-40 B

Supply of pre-polarized condenser gooseneck microphone for podium with overall length of 450mm or better, with XLR3M-type connector, shall offer radio frequency interference (RFI) shielding against intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of acceptance (-3dB) or better, frequency response of 50 Hz to 20,000 Hz or better and sound input levels handling capability of minimum 130 dBspl or better, nominal equivalent noise level of 26 Dba or better and output shall be low impedance balanced (<100 ohms) with current consumption shall be 3 mA or better.

Gooseneck Microphone Base, MAKE- Sennheiser, Clock Audio, Rode, MODEL- MAT 133 SB

Supply of table stand for podium with Microphone modes Toggle on / off, Push to mute, Push to talk, permanent on for connecting and operating XLR gooseneck microphones with XLR-3F microphone input and an XLR-3M microphone output operating on 48 V phantom power and current consumption of 3.7 mA or better. Approved

Ceiling Mounted Microphone Array, MAKE- Sennheiser, Poly, Beyer Dynamic, MODEL- TCC 2

Supply of ceiling mounted microphone array with automatic dynamic beamforming, voice lift facilities, 4 or more exclusion zones, minimum 1 priority zone for fitting into 600 mm (2 ft.) ceiling panel / mountable / flush within ceiling, having 28 or more pre-polarized condenser microphone capsules within the same unit or can be mounted separately, with Dante interface with two RJ 45 sockets, will support PoE / sensitivity shall be 0 dBV/Pa (988 mV/Pa) or better and maximum SPL shall be 104 dB SPL or better, dynamic range shall be 93 dB(A) or better, shall be tested according to UL 2043 rating or better.

Mount for TCC2- MODEL- SL CM FB

Mounting Bracket for above Ceiling Tile Microphone

Wireless Digital Handheld Microphone, MAKE- Sennheiser, Clock Audio, Rode, MODEL- EWD-835S

Wireless Digital Lavalier Microphone, MAKE- Sennheiser, Clock Audio, Rode MODEL - EWD-ME2

DSP, MAKE- Xilica, Bose, Extron, MODEL- Solaro FR1D

Ceiling Speaker, MAKE- Xilica, Bose, Extron, MODEL Sonia C5

Supply of Rimless 5.5” in-ceiling loudspeaker, optimized for speech intelligibility and powered with a single Ethernet connection. Integrated mounting for Sonia Amp to rear of back-can. Rimless Low Frequency: 134mm (5.25″) polypropylene cone, rubber surround; High Frequency: 19mm (0.75″) silk dome tweeter optimized for speech intelligibility and powered with a single Ethernet connection. Integrated mounting for Amp to rear of back-can. Audio in/out: RJ45, CatX, amplified audio over Category cable. Frequency Range 50Hz to 20kHz (-10dB).Coverage Angle 180 degrees (-6dB at 2kHz), 107 degrees (-6dB at 10kHz). Sensitivity >91dB (at 1m). Compliance CE, RoHS Approved Makes: Xilica, Bose, Extron

Amplifier, MAKE- Xilica, Bose, Extron, MODEL- Sonia Amp

Supply of Four channel PoE amplifier with integrated Dante networking, capable of powering 4 x Sonia C5 in-ceiling loudspeakers. Includes additional network port for support of Dante ceiling microphone. Mounts to rear of Sonia C5. Four channel PoE amplifier with integrated Dante networking, capable of powering in-ceiling loudspeakers. Includes additional network port for support of Dante. Power-over-Ethernet PoE+ to IEEE 802.3at, Class 4.Cooling Convection cooling, no fan. Amplifier Type Class D.Sample Rate 48kHz.Dynamic Range (20Hz-20kHz BW) >90dB. THD+N (20Hz to 22kHz) <0.3%. Crosstalk (Channel-to-Channel at 1kHz) <-90dB Approved Makes: Xilica, Bose, Extron

Column Speaker, MAKE- Audac, Reinkus Heinz, Extron , MODEL-

Supply of Column Loudspeaker, 12 X 2" Aluminium Cone LF Driver ; Max Power Handling 240W or more ; Multiple 100V Taps : 40W / 20W / 10W / 5W or more; Frequency range 120Hz – 20Khz or more; Sensitivity 92 dB and Max SPL 112 dB or more; Beamwidth 170° x 8° (H X V) or more ;

Amplifier- MAKE- Audac, Extron, Yamaha, MODEL- EPA-252

Supply of Dual Channel Energy Star Rated Class D Amplifier , 2 X 250W @ 4Ω, 2 X 130W @ 8Ω, 1 X 500W @ 8Ω Bridge or better, Signal / Noise > 90 dB or better THD+N (@ 1 kHz) < 0.1% or better Crosstalk (@ 1 kHz) > 70 dBA or better

18-Port PoE+ Switch, MAKE- Netgear

Speaker Cable, MAKE- OFC 1.5

XLR Connector, MAKE- Neutrix

AV rack

DSP Programming Charges

Installation, Commissioning, Testing and Training

LED Wall with required Controller and structure, MAKE- Samsung, LG, Infonics, MODEL- LED Videowall+Video processor with Mount

SITC of LED Video Wall - Indoor COB having Pixel Pitch of 1.5mm, LED wall size 2400 mmx4480mm with Display Resolution of (HXW) 1560x2912 Pixels. , Videoprocessor (Input HDMI Ports -8 Nos and Output 16 Ethernet Ports, Viewing Angle (Horizontal/Vertical) 160/160 degree, optimal viewing distance >/=1.5m, refresh Rate 3840 Hz, Responce Time 10 milliseconds, frame Frequency 50-60 Hz, Brightness Calibrated Minimum 600 Nits, CR 10000:1, Uniformity of Brightness across Screen 99, Gray Scale Processing 13 Bit, Life of Light SOurce 100000 Hours, Dimming Capability 256 Levels, MTBF>10000 Hours, Maintenance Front, Power Input 230Vac+/- 10%, 50-60 Hz, Wall Mounted, Certificates BIS, ISO9001:2015, ISO 14001:2015, ISO/IEC 27001:2013, ISO 45001:2018, RoHS, EPR

Transportation FOR AV

MEDIA DELIVERABLES

Multimedia content Case study in 8K resolution, Dolby 5.1 surround sound. Includes professional script by scriptwriter with 15+ years of experience, video shooting at 2-3 states within India, voiceover, mgfx, music composition, SFX, colour grading, mix-mastering. Duration: 30 - 45 minutes

Multimedia content: Case study in 8K resolution, Dolby 5.1 surround sound. Includes professional script by scriptwriter with 15+ years of experience, video shooting at 1 state within India, voiceover, mgfx, music composition, SFX, colour grading, mix-mastering. Duration: 6-8 minutes each