Construction of New Passenger Terminal Building at Civil Enclave Gorakhpur Phase I II SH Fire Fighting System and hydro Pneumatic System and Water Supply Allied works.

Amount

Supply , Installation, Testing and Commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required a) Approx. 50.66 Horizontal type , single stage, centrifugal, end suction pump of cast iron body and bronze impeller with stainless steel shaft , mechanical seal to ensure a minimum pressure of 6kg /sq. Cm at highest and farthest outlet at specified flow of 2280 lpm at 70 m. head conforming to suitable IS. b.) 60 HP, 1800 RPM water cooler with radiator , diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12/24 volts electric starting equipment, lead acid battery with battery stand, vertical exhaust pipe extended upto 6m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding , residential silencer, instruments and protection as per specification , stop solenoid for auto stop in the event of fault with audio indications , painted with post office red colour etc. as required. c.) One 200 Ltr capacity day oil storage tank fabricated from 3mm thick M.S plates. Tank shall be provided with intlet, outlet, overflow, air vent drain connections, filling connection & level indicator . Tank shall be mounted on a suitable steel structure (Painted with 2 coat of red oxide paint). Tank shall be provided with tow or more coats of synthetic enamel paint outside over two coats of red oxide primer. d.) M.S Fabricated Common base plate, coupling , coupling guard, foundation bolts etc. as required. e.) Suitable cement concrete foundation duly plastered with ant vibration pads.

Supply , Installation, Testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required a.) Approx 34.77 BHP , Horizontal type , single stage, centrifugal, end suction pump of cast iron body and bronze impeller with stainless steel shaft , mechanical seal to ensure a minimum pressure of 6 kg /sq. Cm at highest and farthest outlet at specified flow of 2280 lpm at 70 m. head conforming to Suitable IS . b.) 60 Hr/45 kw SQ cage induction motor, TEFC , synchronous speed 2900 RPM , suitable for operation on 415 Volts, 3 Phase 50 Hz , AC with IP 55 Class protection for enclosure horizontal foot mounted type with Class - 'F' insulation, conforming to Suitable IS. c.) M.S Fabricated Common base plate, coupling , coupling guard, foundation bolts etc. as required. d.) Suitable cement concrete foundation duly plastered with ant vibration pads.

Supply , Installation, Testing and Commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following : complete in all respect as required. a.) Approx. 10.76 BHP, Horizontal type, single stage, centrifugal, end suction pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal at specified flow of 180 Ipm at 70 m . Head conforming Suitable IS. b.)Approx. 15 HP Squirrel cage induction motor TEFC type suitable for operation on 415 volts ,3phase 50Hz. AC with IP55 Class of protection foreclosure, horizontal foot mounted type with Class' insulation, conforming to Suitable IS. c.) M.S.fabricatedCommonbaseplate,flexi

Providing and fixing air vessel for fire pumps as per following specifications : Diameter - 400 mm, Shell thickness - 8 mm, Dish ends - 8 mm, Height - 1200 mm , Finishing - Two coats of Red enamel paint of first grade over one coat of primer externally & two coats of epoxy coating inside, Material of Construction - M.S., Test Pressure - 15 Kg./ Sq.cm.

Providing, Installation, testing and commissioning of Y-strainer fabricated foot of CI body with 3 mm. Dia perforations with flanged ends. 200 mm dia

Supply , fixing , testing and commissioning of butterfly valve PN 16 with CI Body , Epoxy coated Disc duly ISI marked completed with Nuts, Bolts, Washers, Gaskets, conforming to IS 13095 , of following size as required. 200 mm dia

Supply , fixing , testing and commissioning of butterfly valve PN 16 with CI Body , Epoxy coated Disc duly ISI marked completed with Nuts, Bolts, Washers, Gaskets, conforming to IS 13095 , of following size as required. 150 mm dia

Supply , fixing , testing and commissioning of butterfly valve PN 16 with CI Body , Epoxy coated Disc duly ISI marked completed with Nuts, Bolts, Washers, Gaskets, conforming to IS 13095 , of following size as required. 100 mm dia

Supply , fixing , testing and commissioning of butterfly valve PN 16 with CI Body , Epoxy coated Disc duly ISI marked completed with Nuts, Bolts, Washers, Gaskets, conforming to IS 13095 , of following size as required. 80 mm dia

Providing , installation , testing and commissioning of dual plate wafer type non-return valve PN 16 of CI body of following size confirming to IS:5312 complete with rubber gasket , GI bolts , nuts, washer etc. as required. 150 mm dia

Providing , installation , testing and commissioning of dual plate wafer type non-return valve PN 16 of CI body of following size confirming to IS:5312 complete with rubber gasket , GI bolts , nuts, washer etc. as required. 80 mm dia

C.I. Sluice Valve Non Rising stem as per IS: 14846/2000 type PD pn 1.0 with Stainless steel spindle, flanged drilled to IS : 1538 with Hand wheel operated 150 mm dia 150 mm dia

C.I. Sluice Valve Non Rising stem as per IS: 14846/2000 type PD pn 1.0 with Stainless steel spindle, flanged drilled to IS : 1538 with Hand wheel operated 150 mm dia 100 mm dia

SITC of Puddle flanges as per the approved design made out M.S. Plate 200 mm dia

SITC of Puddle flanges as per the approved design made out M.S. Plate 150 mm dia

SITC of Puddle flanges as per the approved design made out M.S. Plate 100 mm dia

SITC heavy class MS suction & delivery headers of required length with welded joints inclosing standard MS fitting & one coat primer & two coat of red enamel color P.O. RED. 200 mm dia

SITC heavy class MS suction & delivery headers of required length with welded joints inclosing standard MS fitting & one coat primer & two coat of red enamel color P.O. RED. 150 mm dia

SITC heavy class MS suction & delivery headers of required length with welded joints inclosing standard MS fitting & one coat primer & two coat of red enamel color P.O. RED. 100 mm dia

SITC heavy class MS suction & delivery headers of required length with welded joints inclosing standard MS fitting & one coat primer & two coat of red enamel color P.O. RED. 80 mm dia

SITC heavy class MS suction & delivery headers of required length with welded joints inclosing standard MS fitting & one coat primer & two coat of red enamel color P.O. RED. 25 mm dia

Providing , installation, testing & commissioning of pressure switches for Hydrant, including necessary wiring , up to control panel & other materials.

Extra for excavation, back filling , wrapping & coating by 4 mm thick pipe coat (iwl) on under ground pipe with proper bedding complete. 150 mm dia

Extra for excavation, back filling , wrapping & coating by 4 mm thick pipe coat (iwl) on under ground pipe with proper bedding complete. 80 mm dia

SITC gunmetal / SS single acting air release valve with screwed inlet 25 mm dia

SITC brass ball valve (Full bore type ) with plastic coated lever and screwed female end tested to 20 kg / cm2 of approved quality as specified. 25 mm dia

SITC dial type pressure gauge with isolation cock suitable for working pressure of 250 PSI. Dial diameter 10 mm calibration 0- 15 kg/ sq.cm

SITC Draw out connection 150 mm dia in CI body with GM working Parts.

SITC of Fireman axe with rubber handle

Supply of double door hose cabinet Indoor type keeping for hose reel drum, hydrant valve , branch pipe , hose pipe & extinguisher having central opening glass door (4 mm thick glass) including necessary locking arrangement & handle (size 1300 mm x 900 mm) duct deepness will be 500 mm . Thickness of MS sheet will be 1.6 mm with PO red color.

SITC battery 150 AH 12 V for genset

Supply of following size of 1.1 KV grade , XLPE insulated PVC sheeted Aluminium conductor cable confirming to IS: 7098 part- II amended up to date 3.5 x 50 sqmm Aluminium Cable.

Supply of following size of 1.1 KV grade , XLPE insulated PVC sheeted Aluminium conductor cable confirming to IS: 7098 part- II amended up to date 4 x 25 sqmm Aluminium Cable.

laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade not exceeding 35 Sq.mm , direct in ground including excavation , sand , cushioning , protective covering and refilling the trench etc. as required.

Laying & fixing of one No XLPE insulated & PVC sheeted Aluminium/ Copper Armoured Cable of 1.1 KV grade of following size on surface / cable tray etc. as required. Not exceeding 35 sqmm

Laying & fixing of one No XLPE insulated & PVC sheeted Aluminium/ Copper Armoured Cable of 1.1 KV grade of following size on surface / cable tray etc. as required. Exceeding 35 sqmm but not exceeding 95 sqmm.

Supplying and making end terminlation with heavy duty type brass single compression gland and aluminium lugs for following size of XLPE insulated aluminium conductor cable of 1.1 KV grade as required. 3.5 x 50 Sqmm

Supplying and making end terminlation with heavy duty type brass single compression gland and aluminium lugs for following size of XLPE insulated aluminium conductor cable of 1.1 KV grade as required. 3.5 x 25 Sqmm

Hydro Pneuymatic System Supply, Installation, Testing and Commissioning of Hydro Pnematic pump System (01 main + 01 Standby ) with Flow (LPH ) 15000 (Each Pump) , Head (Mtrs.) 22.0 , Motor Size 2.2 KW Each which includes 02 Nos. Pumps with Motor (IES), GI Suctin and Discharge manifolds along with necessary valves m NRVs Pr. gauge , Base frame and Microprocessor Based Panel connected with Variable frequency drive (VFD) and Pr. Transmitter mounted in a Steel Cabinet. as per site requirment and approve make list.

Supply , installation , testing and commissioning of Pressure Vessel (200 Ltrs) as per site requirement approve make list.

WATER SUPPLY SYSTEM SITC of Starter cum electronic control panel complete with suitable capacity start and run capacitor for 3.0HP/2.2KW submersible pumpset and suitable for 275 - 475 Volt, Three phase, 50Hz AC supply complete with connection etc as required.

Supply of following size Flat Three Core PVC Insulated and PVC sheathed industrial copper flexible cable of 1100V grade and suitable for Submersible pump motor, confirming to IS:694 with up to date amendments etc as requied. 2.5 Sq.mm 3 core Flat cable

Supply of 3.0 HP Submersible pumpset suitable for Three phase , 50Hz AC supply and having 3000 (rpm ) speed, Head 18/53Mtr, capacity 0-180 lpm, no of stages as per manufacturer design and standards, outlet size 50mm and suitable for 100mm or bigger borewell etc complete as required. Motor shall have dynamically balanced rotor with stainless steel stator body and rotor shaft. Corrosion and abrasion resistant parts of pump shall be made of stainless steel. Make : 4CSSF8-3009 or as approved make list.

Supply of 50 mm dia GI pipe Heavy Duty complete with welded flange in piece of 3 mtrs length and other accessories etc as required for drop pipe of submersible pump of outlet size 50mm.

Providing and fixing of jam clamp of size (450mmx75mmx10mm) of flat iron clamp suitable for 50mm dia pipe i/c nut bolt washer etc. as required

Lowering the submersible pump set of 3.0 HP and delivery pipe line of required size (50mm dia) up to depth of 45 mtrs(or as required) including leak proof jointing,cable connection,providing heavy duty guard/safety wire etc. and testing after lowering complete as required. (All T & P will arrange by the contractor).

M/s Anil Enterprises

VSD ENGINEERING PRIVATE LIMITED

Industrial project And Products Co.