Repair to sanitary fittings plastering sunken floor internal water supply and misc works at central institute Saddleback Station Offrs Mess Arjun Officers Mess Laager Complex Flag Staff House K2z and GSA in the area of AGE B/R I under GE(N) Ahmednag

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block masonary,stone /brick/ RRwalling built in cement and sand mortar etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting/AC Sheet, any gauge, thickness, including ridge etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

All as per Item No. 7 (here-in-before) but n.exc 1.5 Sqm etc complete all as specified and directed by Engineer-in-Charge

Taking down shutter exceeding 1.00 Sqm but not exc 2 Sqm etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 75 mm thick plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

M & L for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge

M & L for glazed ceramic coloured tiles of size 350 X 250 mm X 7 mm/450x350x7mm thick on vertical surfaces as in dados laid over and including a backing coat of 10 mm thick in cement and sand mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L for Non skid ceramic coloured tiles 7 to 8 m thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

All as per item No 14 (here-in-before) but on skirting over and including 10 mm thick backing coat in cement and sand mortar (1:4)

Material and labour for light shade vitrified ceramic tiles, 10 mm thick (square/ rectangular) polished, area of each tile exc 0.11 Sqm but not exceeding 0.38 sqm as in floors etc. laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per item No 16 (here-in-before) but on skirting over & including 10mm thick backing coat in cement and sand mortar (1:4)

M&L for machine cut kota stone slab florring 20-25 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match shade of the slab including rubbing and plishing etc complete all as specified and directed by Engineer-in-Charge

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over & including 10mm thick screed in cement and sand mortar (1:4) cement screed and jointed with cement slurry mixed with pigment to match the shade of kota stone etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 17-18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over and including screed bed 15mm thick in cement and sand mortar (1:4) jointing , pointing in white cement and sand mortar (1:2) using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and directed.

Material and labour machine cut cudappah stone slab 20-25 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius, built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 10 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:4) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs vitreous china white wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs wash hand basin vitreous China white flat back of size 450 X 300 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion paint over a coat of chalk whitening primer on wall etc complete all as specified and directed by Engineer-in-Charge

M & L for Complete removal of existing treatment on plastered surface and applying 2 mm thick wall care putty (birla) including crack filling and applying two coats of Oil bound distemper (OBD) etc complete all as specified and directed by Engineer-in-Charge

M&L for PVC sheets or insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall/Ceilings with Aluminium frames etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing old painted surfaces of walls and applying one coat of cement paint etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old plastered surfaces of walls and applying two coats of cement paint on wall etc complete all as specified and directed by Engineer-in-Charge

M&L for prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered/decorated wall surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old wall surfaces of any description & applying one coat of acrylic (antifungal) exterior grade paint on wall/roof etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old surafces of walls etc and applying one coat of white wash etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 37 (here-in-before) but one coat of white wash on ceiling

M & L for preparation of old painted wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

All as per item No 39 (here-in-before) but on steel surfaces

Supply and fix 2 nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial. kiln seasoned if one face is covered with decorative face veneer with lipping/frame to match the shade etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet etc complete all as specified and directed by Engineer-in-Charge

S&F Factory Made Solid PVC Moulded Door Shutter,with wood free EPS 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face in the frame at site etc complete all as specified and directed by Engineer-in-Charge

Material and labour for second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads etc complete all as specified and directed by Engineer-in-Charge

Supply and fix stainless steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for French polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats at any height incl scafolding etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge

S&F fancy type bib taps chromium plated 15 mm dia cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule , fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union as fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs 15 mm bore of pipe etc complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads n'exc 1.5 Sqm etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs brass CP shower rose 125mm size etc complete all as specified and directed by Engineer-in-Charge

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge

S&F in repair wall mixture, 3-in-1 with provn for both telephonic shower /over head shower etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 25 mm dia stainless steel curtain rods with fixing brackets etc complete all as specified and directed by Engineer-in-Charge

Dismantling of water tanks from any position / location, of any make etc,of capacity exc 500 Ltr & n.exc 1000Ltr with ball valve, etc complete all as specified and directed by Engineer-in-Charge

All as per Item No 64 (here-in-before) but 2000 ltrs

S & F in repairs rotational moulded polyethylene water storage tanks Double layer (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipr and connecting etc complete all as specified and directed by Engineer-in-Charge

All as per item No 66 (here-in-before) but 1000 ltrs etc.

All as per item No 66 (here-in-before) but 2000 ltrs etc.

Material and labour for special treatment ot sunken portion with 10mm thick plaster in cement and sand mortar (1:4) with WPC liquid complast 421 and applying one coat each of Nittoproof 120 on plastered surface rendering again 10mm thick in cement and sand mortar (1:4) mixed with complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked etc complete all as specified and directed by Engineer-in-Charge

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `C' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and directed by Engineer-in-Charge

S/F in repairs vitreous china wash basin white oval size 520X450mm white excluding taps waste, chain and plug and procelain stopper nut all as directed completely fixed on granite counter fixed etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs for vitreous china white urinals, bowl type (back or corner wall type,) complete including providing andfixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugswith and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisternswith brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples as fixed etc complete all as specified and directed by Engineer-in-Charge

S & F in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete etc complete all as specified and directed by Engineer-in-Charge

M & L for for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

M&L for Plastering 10 mm in cement and sand mortar (1:3) using 100% course sand on roof mixed with & including M & L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M & L for for providing water proofing treatment on roofs as per latest zonal specification , as per manufecturer's instructions and as specified after taking down/out as existing at site :- (a) M & L for Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.25 ltrs/sqmts and allow to dry. (b) M & L for Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts with white gravel/mineral finished by thermofusion process.

M&L for Fe 410-W (Gde-250) quality a roof truss (framed), trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel for flat section) including distance pieces, cleats etc in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs aluminium extruded section door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed etc complete all as specified and directed by Engineer-in-Charge

Taking down aluminium doors shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening etc complete all as specified and directed by Engineer-in-Charge Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

Taking down aluminium windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium cleats of existing make and also refixng the locks & roller in existing postiion with and includig new screws including refixing the window shutters in same opening etc complete all as specified and directed by Engineer-in-Charge Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

S&F in repars concealed star lock powder coated for aluminium window fixed as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge

M&L for PVC mirror cabinet of size 16" X 16" with napkin rail in ivory colour etc complete all as specified and directed by Engineer-in-Charge Parryware or equivalent

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated anodised aluminium fully glazed door shutters side hung type / sliding type with top channel and roller and accessary, aluminium section weighing 0.25 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified (Note : Glass will measured and paid separately)

S&F powder coated anodised aluminium glazed window shutter side hung / sliding type, without sash bars, aluminium sections weighing 0.25 kg/m aluminium open track section having reqd size of style and top rails, bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Note : Glass will measured and paid separately)

M&L 4.00mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

S&F 75mm size 4 lever brass body concealed lock with duplicate keys, fixed in aluminium doors as per manufacturers instruction etc complete all as specified and directed by Engineer-in-Charge

Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks etc removal to store etc complete all as specified and directed by Engineer-in-Charge

S &F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed by Engineer-in-Charge

S &F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc complete all as specified and directed by Engineer-in-Charge

Taking up and down 15 mm bore GI tubing and connection etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No. 94 (here- in- before) but 20 mm bore

All as per Sl item No. 94 (here- in- before) but 25 mm or 32 mm bore.

S&F in repair 15mm galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 97 (here- in- before) but 20 mm bore of pipe

Supplying & laying 20 mm bore in trencies Polyethylene (PE-AL-PE) compositc pressure pipes including all Crimp type internal sealing Plastic-Metal Composite fittings (such as elbows, tees, reducers, etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No.99 (here- in- before) but 15 mm bore of pipe

All as per Sl item No. 99 (here- in- before) but 25 mm bore of pipe

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s) etc complete all as specified and directed by Engineer-in-Charge

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs stainless steel grating, 110 mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) floor trap, 75 mm dia with grating including jointing with solvent cement etc all as directed.

Dismantling of single layer Mangalore pattern or similar tiles in roofing etc complete all as specified and directed by Engineer-in-Charge

M&L second class hardwood clean swan battens at 25 cm centres, section area exc 5 & n.exc 15 Sqcm etc complete all as specified and directed by Engineer-in-Charge

M&L for roof tiles, Mangalore Pattern, interlocking at side joints, laid dry etc complete all as specified and directed by Engineer-in-Charge

All as per item No 109 (here-in-before) but except tiles

M&L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar (1:3) or cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Dismantling pressed burnt clay tiles Plain/designer of any size in roofing etc complete all as specified and directed by Engineer-in-Charge

Material and labour for Hydraulically pressed burnt clay tiles Plain/Designer of size 200x120x10 mm machine made laid over & including cement mortar screed 15mm thick in cement and sand mortar (1:6) mixed with water proofing compound and jointrd, pointed in cement and sand miortar (1:3) mixed with 5% crude oil by weight of cement as per manufacturere's instructions and etc complete all as specified and directed by Engineer-in-Charge

M&L for Providing precast cement concrete Type B2 1:2:4 (12.5mm Graded aggregate) louvres & roof 100mm thick set in cement and sand mortar (1:4), including all mould- ings but excluding frame all as specified and directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc,) or any type ceiling board any thickness including cover fittets etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated aluminum alloy interlocking snap grid 600mmx600mm consists of min tee runners of size 38mm x 25mm x1.5mm and cross Tee of size 25mm x 25mm x 1.5mm spaced between the main Tee at 600mm centre to cntre to form a grid of 600mm x 600mm etc complete including GI wire hangars at 1200 mm intervals all as specified as per manufacturere's instructions and etc complete all as specified and directed by Engineer-in-Charge

M&L for 4mm thick non asbestos fibre cement building boards of make 'E' board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd of equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work with etc complete all as specified and directed by Engineer-in-Charge

S & F 16 to 18 mm thick Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with cement slurry and back coating of 10 mm thick and including polishing, rubbing & including silicon treatment etc complete all as specified and directed by Engineer-in-Charge

M&L for chequred cement concrete tiles 20X20X25mm thick set jointed & pointed in neat cement slurry as in floor with grey cement & pigment incl 15mm thick screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs stainless steel kitchen sink matt finish with draning board over all size 915 x 510 mm and bowl size 510 X 405 X 200 made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge

S&F in aluminium anodized grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm &1.4mm thick all as per manufactures instructions etc complete all as specified and directed by Engineer-in-Charge. Make of grill Deco grill or equivalent

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws etc complete all as specified and directed by Engineer-in-Charge

S&F in 10 mm thick toughen glass for shelves in corner along with brackets etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs towel Ring of chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs extruded brass handles 100mm, fabricated type polished etc complete all as specified and directed by Engineer-in-Charge

S&F stainless steel glass lock to tuffen glass etc complete all as specified and directed by Engineer-in-Charge

M&L for prelaminated particle board 12 mm thick exterior grade prelaminated one side with decorative choice lamination & other side balanceing white lamination, fixed with screws to timber frame work etc complete all as specified and directed by Engineer-in-Charge

M&L for providing 10 mm thick plaster of paris (gypum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6mm with 10mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame wk etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 77,688.00 shall be deducted from BOQ on account of schedule of credit

M/S-B.R.SONAWANE

M/s Meher Construction