GE/PNH-67/2023-24

Amount

B&R PORTION:- Demolition of cement concrete (un reinforced) in ground floors and paving n exc. 15 cm. thickness, below or above ground level complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified and directed.

Demolition of cement concrete (reinforced) in any position not otherwise specifically provided complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for plane Cement concrete 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for plane Cement concrete 1:2:4 Type B1(using 20mm graded agg) in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for TMT bars 6mm to 8 mm dia and cut to length bent to shape and binding with MS wire (annealed) not less than 0.9mm Dia complete all as specified and directed.

Formwork to flat sides of concrete foundation footings, bases of column, raft and raft beam, side and soffits (in any) of foundation and plinth beams ans similar works, vertical or to batter, rough finished flat surfaces of concrete complete all as specified and directed.

M&L for boulder filling hand packed tightly (any thickness) at back of walls over arches etc, and raising (or lowering) to the required level compete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar 1:6, complete all as specified and directed.

S & F in repair PVC (SWR) pipe 110mm dia of bore single socketed, in any length with rubber ring joints, laid in trenches or in weep holes to drain out water complete all as specified and directed.

M & L for Walling of random rubble, brought upto course, built in CM 1:6 complete all as specified and directed.

M&L for Cement concrete 1:2:4 Type B1(using 20mm graded agg) in copings complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm to face stones (lime and sand stone) and dressing of face beds and joints, complete all as specified and directed.

M & L for raised pointing to random rubble masonary, or polygonal rubble, uncoarsed or brought upto courses built in cement mortar 1:4, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1: 4 on fair faces of brick work/stone masonary/concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for applying two coats of cement base paint on walls including preparation of new plastered or un-plastered surfaces of wall complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring finished even & fair without using extra cement, complete all as specified and directed.

Framed work such as grills, gratings steel gate, purlin etc. with ends of bars shouldered and/or riveted, forged into spikers; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framwork of water tanks and similar work walk way, railing, frame work of water tanks and similar work confirming to Fe.290. Gde E 165, including dismantling/ demolition of old grill/ grating Complete all as specified.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously untreated steeel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and directed

M & L for providing precast cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone agg) as in PCC bonders set in CM 1:6 complete all as specified.

M & L for 100 mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub bases to floring/ path etc finished even and fair, complete all as specified and directed.

M & L for chequered cement concrete tiles with chemical resistant coating if size 300x300x25mm thick, set & joined in neat cement slurry in floors and pointed with grey cement mixed up pigments laid over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete inter locking paver block (Reflective type) in any shape and size confirming to IS-15658-2006 of 80 mm thickness M-40 grade laid jointed pointed with grey cement and no pigments complete all as specified and directed by Engr-in-Charge. Note : Paver block shall be got approved by the GE before bulk procurement and lot shall be got tested independantly.

M & L for Plain cement concrete 1:3:6 type C-1 (using 20 mm graded stone crushed aggregate) in surface channel and drains incl necessary formwork, complete all as specified and directed.

M/S Farooq Ahmed Bhat

JAMWAL CONSTRUCTION CO

narayan construction

M/S KIRAN CONSTRUCTIONS

M/S KHAN ENTERPRISES

Modh Hafiz Khan

d d builders