Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹82.1 LAccepted-AOC 01 KHUMRIYAL KUPWARA KHUMRIYAL KUPWARA KUPWARA JAMMU KASHMIR 193223 | KUPWARA | JAMMU AND KASHMIR | 193223 | L1 | Accepted-AOC LOWEST AND REASONABLE | |
| 2 | L2₹87.1 L+₹2.9 L (3.47%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹88.6 L+₹4.4 L (5.22%)Rejected-Finance NAROO PO ICHIGAM BADGAM KASHMIR 191111 J K | ICHIGAM | BADGAM | JAMMU AND KASHMIR | 191111 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹89.8 L+₹5.6 L (6.63%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹91.5 L+₹7.3 L (8.71%)Rejected-Finance 01 DUDWAN KUPWARA DUDWAN KUPWARA JAMMU KASHMIR 193222 UDYAM JK 12 0031214 | KUPWARA | JAMMU AND KASHMIR | 193222 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹96 L
EMD Value
₹1.7 L
Closing Date
9 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF SRINAGAR
CWE AF SRINAGAR
ADDITIONAL ALTERATION IMPROVEMENT TO CERTAIN OMQS AT AF STATION SRINAGAR PHASE I
2023_MES_578506_1
CWE(AF)SGR/SGR-33/2022-23
Open Tender
Civil Works
Item Rate
365 days
AF STATION SRINAGAR
AS PER NIT
8 documents required · 8 mandatory
₹1,000
GE AF SRINAGAR
₹1.7 L
Yes
4 May 2023
1 Feb 2023
11 Mar 2023
1 Feb 2023
9 Mar 2023
23 Feb 2023
Amount
BUILDING WORKS
Taking down Shutters of any description exc 1 Sqm and not exc 2 Sqm each, etc complete all as specified and directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.50 Sqm and credited to the contractor, complete all as specified and directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc 4 Sqm each and credited to the contractor, complete all as specified and directed. Note for Srl No 1.002 and 1.003. The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface without any aditional cost.
Refixing of Shutters after easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc of any description exc 1 sqm and not exc 2 sqm each in same opening, complete all as specified and directed.
Supply and fixing Pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, 100mm butt hings, hold fast, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC 1:3 :6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats, complete all as specified and as directed.
Material and labour for structural steel work as in truss, rafter purlins, made out of angle/hollow pipe/tube section including jointing cleats, plates flat iron, gusset plates, rails, braces etc confirming to Fe-290 Gde-E-165, complete all as specified and directed.
Material and labour for PCC 1:3:6 type C1 using 20mm graded stone aggregate as for holdfasts, etc including necessary formwork, complete all as specified and directed.
Supply and fixing Factory made Glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass/gauze etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); in second class hardwood, Complete all as specified and directed.
Supply and fixing 35mm thick Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, Complete all as specified and directed.
Supply and fixing Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as specified and directed.
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.
Supply and fixing powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. , complete all as specified and directed.
Supply and fixing powder coated of any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.), complete all as specified and directed.
Supply and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge
Supply and fixing in repair 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in Kitchen drawers, Cupboard shutters etc, complete all as specified and directed.
Supply and fixing 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions.
Supply and fixing 30mm width of flaps Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.
Supply and fixing for Aluminium alloy, anodised, sliding door bolt 300mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.
Supply and fixing for 150 mm long Aluminium anodised, handle of extruded section fabricated type anodised and fixed, complete all as specified and directed.
Supply and fixing for Aluminium, anodised, barrel tower bolts 150mm size of extruded section, complete all as specified and directed.
Supply and fixing 125 mm long Aluminium anodised, handle of extruded section fabricated type anodised and fixed complete all as specified and directed.
Supply and fixing for Aluminium, anodised, barrel tower bolts 125mm size of extruded section, complete all as specified and directed.
Supply and fixing for Butt hinges, stainless steel, 100mm size, complete all as specified and directed.
Supply and fixing 5mm thick tinted glass fixed with glazing clips in aluminum window/ventilator, complete all as specified and directed.
Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.
Supply and fixing Figured Glass pin head type 4mm thick not exc 0.5 Sqm and glazing with oil putty, Complete all as specified and directed.
Supply and fixing Floor door stopper of aluminium alloy body 140mm cover plate and tounge, anodised with hard-drawn steel spring fixed in floor, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
Supply and fixing Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and old framework complete all as specified and directed.
Material and labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, fixed in repairs, complete all as specified and directed.
Material and labour for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed.
Material and labour for 06 mm thick Non asbestos fibre cement building boards one side aluminium foil coated fixed or laid/ inserted to existing framework with screws, including taking down of existing ceiling board complete all as specified.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Supply and fixing Pre- painted (In camouflage pattern, design and colour as approved by Engr-in-Charge) galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fixing in repairs 300 mm long mild steel ordinary rat tail rod pattern, door spring including roller and roller plate complete all as specified and as directed.
Demolition of reinforced cement concrete as in chimney, Roofs, floors (other than ground floors), beams staircases, landing, chajjas, shelves and similar suspended work complete.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for fair finished surface; not exceeding 200m thick (Horizontal or sloping), complete all as specified and directed.
Material and labour for RCC, Type B1 1:2:4 (20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.
Supply and fixing Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
Supply and fixing in repair 100 mm size hasp and staple, mild steel including bolt to hinge plate and fixed with screws in repairs complete all as specified and as directed.
Supply and fixing brass knobs 35-40mm dia, complete all as specified and directed.
Supply and fixing Drawer brass handles, projecting drop (50 mm to 65mm) on screwed plate.
Supply and fixing in repair Stainless Steel drapory rod 25mm dia fency type inculding stainless steel finols and stainless steel brackets, Complete all as specified and directed.
Material and labour for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for tightening bolts and closing bolt holes, etc.to rectify the leakage/ seepage, in old roof of corrugated steel sheets by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts if required, all set in stiff white lead Complete all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors aprons etc laid in cement mortar of any thicknes, complete all as specified and directed.
Material and labour for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including 20mm thick screed bed in CM (1:6) for laying of Granite slab & pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half moulding of granite edges complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises.
Material and labour for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. with using 3mm spacers, and joints filled with epoxy grout, including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6, complete all as specified and directed.
Material and labour for Digital glazed Vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc with using 5mm spacers and joints filled with epoxy grout, including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6, complete all as specified and directed.
All as per item No 1.052 above here-in-before but in Skirting including 10 mm thick backing coat cement mortar 1:4, complete all as specified and directed.
Material and labour for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc with using 3mm spacers, and joints filled with epoxy grout, including 15 mm thick Screed bed or bedding layer of mortar for laying floor finishes in CM 1:6, complete all as specified and directed.
All as per item No 1.054 above here-in-before but in Skirting including 10 mm thick backing coat cement mortar 1:4, complete all as specified and directed.
Material and labour for Coloured Glazed ceramic tiles in vertical surface 600x300x7 mm thick set and jointed in neat cement slurry with using 3mm spacers, and joints filled with epoxy grout, including rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as backing coat.
Material and labour for Pre-Polished machine cut kota stone slab flooring 20-25 mm thick over screed bed or bedding layer 20 mm thick in CM 1:6, and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing complete.
Material and labour for Pre-Polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 1.058 including backing coat 10mm thick in CM 1:4.
Demolition of Cement Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level).
Material and labour for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in hard standing/pavings/plinth protections, finished even and smooth without using extra cement, Complete all as specified and directed.
Material and labour for Machine pressed, glossy finished 25 mm thick coloured cement concrete chequered tiles of size 300mm x 300 mm of pattern as approved set jointed and pointed in neat cement slurry and pigment in floors laid over cement screed bed of 15mm thick in cement mortar 1:6, complete all as specified and directed.
Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc incl removal of rubbish out of defence land complete all as specified and as directed.
Material and labour for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1: 6, using old size bricks complete all as specified and as directed.
All as per item No 1.063 above here-in-before but except bricks.
Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and as directed.
Taking down cement plaster/cast in situ terrazo of any description on brick walls or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed. (The rate quoted by the contractor shall included for welded mesh, scaffolding and necessary formwork upto triple storey bldg).
Material and labour for rendering 10 mm thick on other than fair faces of brick wall finished fair & even in CM 1:6 complete all as specified and directed.
Material and labour for rendering 15 mm thick on fair faces of brick wall finished fair & even in CM 1:4 complete all as specified and directed.
Material and labour for rendering 5 mm thick on brick or concrete surface of ceiling finished fair & even in CM 1:3 complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces of wall and applying two coats of OBD over a coat of putty filling including preparation of surfaces on walls as specified and directed.
Material and labour for prepartion of old decorated plastered or unplastered surfaces of ceiling including filling of holes, cracks with cement wall putty making surface even and smooth and applying one coat of distemper oil emulsion paint (OBD) complete all as specified and directed.
Material and labour for complete removal of existing treatment of walls and applying 3mm thick layer of wall care putty and prepare the smooth surface with sand paper and applying two coats of distemper oil emulsion (OBD) paint on walls complete all as specified and as directed.
Material and labour for preparing new plastered surfaces and applying two coats of distemper oil emulsion including chalk whitening preparatory to distempering on surfaces of ceilings, complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of weather paint (Apex) paint colour and tint as ordered in any pattern over and including thin layer of wall care putty and one coat of primer upto 15 metres height including sides and soffits of the beams, fascias, parapets etc, complete all as specified and directed.
Material and labour for complete removal of existing treatment of old painted surfaces of walls and applying two coats of weather paint colour and tint as ordered in any pattern over and including thin layer of wall care putty and one coat of primer including sides and soffits of the beams, fascias, parapets etc, complete all as specified and directed.
Material and labour for applying two coats of SHALIMAR SUPERCRETE/NITOBOND water proofing coating on the entire surface of sunken portion, all as specified and directed.
Material and labour for 15mm thick rendering in CM (1:3) admixed with integral water proofing compound FOSROC's complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC's Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag, complete all as specified and directed.
Material and labour for cement concrete (1:5:10) type E-2 (using 40mm crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
Supply and fixing 40 mm dia Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors For GI spout in Sunken floor.
Material and labour for Providing, Type B1, 1:2:4 (20mm graded aggregate) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges
Material and labour for cement concrete type B1 1:2:4 using 20mm graded stone aggregate 25mm thick as in sub base of tiles flooring, complete all as specified and directed.
Taking up or down steel tubing & connections including cleaning for refixing or removal from site 15mm bore pipe, complete all as specified and directed.
Taking down 20 mm dia GI steel tubing and connection, including cleaning for refixing or removal, complete all as specified and directed.
Refixing of old steel tubing and connection in new or old position of 15mm bore. complete all as specified and directed.
Supply and fixing GI tubes medium grade with all fitting and fixed complete to walls, ceilings or laid in floors 15mm bore complete all as specified and directed.
Refixing old GI tubing and connections, 20 mm dia, in old or new position. (Walls, ceiling, floors, etc.) completed all as specified and directed.
Material and labour for tubes 20 mm bore dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting not exc 10 cm girth. complete all as specified and directed.
Material and labour for Lagging to pipes 20 mm bore used in external water supply or plumbing all around with 25 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25mm gauge 20mm mesh complete all as specified and directed.
Supply and fixing in repair Vitreous China wash basin pedestal type, white, flat back, size 550x400 mm, waste, chain and plug and porcelain stopper but including brackets, waste coupling, complete all as specified and directed.
Supply and fixing PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.
Supply and fixing in repair PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed.
Supply and fixing in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR complete all as specified and directed.
Supply and fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe).
Supply and fixing in repairs PVC (Twin/Dual type) flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.
Supply and fixing in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.
Supply and fixing in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm.
Supply and fixing in repair sinks, without drainage board, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.
Supply and fixing in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.
Supply and fixing in repairs two way Bib tap of size 15mm bore cast copper alloy with capstan Head, CP fancy type with long body shank, screwed down high pressure screwed for iron pipe and fixed complete all as specified and directed.
Supply and fixing in repairs stop cock/angle cock fancy type with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.
Supply and fixing in repairs two way stop cock/angle cock fancy type with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore. complete all as specified and directed.
Supply and fixing in repair brass chromium plated shower roses with swivel joints, 150 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.
Supply and fixing in repairs 15 mm dia Brass CP Sink mixer for mixing hot & cold water screwed down for iron pipe and fixed.
Supply and fixing in repairs 15mm dia Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water, complete all as specified and directed.
Supply and fixing in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water with leg for shower mixture, complete all as specified and directed.
Supply and fixing in repair CP Jet Spray of Standard size for EWC alongwith CP connection pipe and all fittings as fixed Complete all as specified and directed.
Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.
Supply and fixing in repairs, chromium plated towel ring of minimum dia 200mm, complete all as specified and directed.
Supply and fixing in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.
Supply and fixing in repair Corner Glass Shelf fixed of size 300x300mm with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 300gms).
Supply and fixing in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed.
Supply and fixing Chromium plated steel grating doom 100mm dia size with/ without hole, complete all as specified and directed.
Supply and fixing in repairs, Toilet paper holder of brass CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.
Supply and fixing in repairs Stainless Steel Soap dish, fixed to plugs with chromium plated brass screws Complete all as specified and directed.
Supply and fixing PVC (SWR) soil waste and vent pipes single socketed 110mm dia bore in any length with rubber ring joints, fixed to walls, complete all as specified and directed.
Supply and fixing PVC (SWR) soil waste and vent pipes single socketed 75mm dia bore in any length with rubber ring joints, fixed to walls, complete all as specified and directed.
Supply and fixing 75mm dia PVC (SWR) floor trap, plain with grating including jointing in cement concrete type B-1 (1:2:4).
Supply and fixing in repair 75 mm dia PVC (SWR) bends any radius with acess door.
Supply and fixing in repair 110 mm dia PVC (SWR) bends any radius with acess door.
Supply and fixing in repairs 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed.
Supply and fixing Steel plate rack made of stainless steel 1 mm thick over all size 600mm x 750mm complete all as specified and as directed.
Supply and fixing 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site including 20 mm Ball brass valves, high pressure, with polythene float and flynut complete.
Supply and fixing 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site including 20 mm Ball brass valves, high pressure, with polythene float and flynut complete.
Supply and fixing in repairs 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
Material and labour for preparation of old painted wooden surfaces of any description and applying one coat of synthetic enamel paint including preparation of old painted wood and wood based surfaces of any description and positions, exc 10cm width or girth complete all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description and applying one coat of synthetic enamel paint including preparation of old painted steel and iron surfaces of any description exc 10cm width or girth complete all as specified and directed.
Supply and fixing of stainless steel Handle fancy type 100 mm size complete all as specified and directed.
Supply and fixing stainless steel hinge of size 60 mm self closing Italian patter suitable for cabinet and shelves opening / closing operation (fancy type) complete all as specified and directed
Material and labour for PVC edge lipping, 3/4mm thick fixed with nails/adhesive for 18/19 mm thick edging of shutters etc, complete all as specified and as directed.
Supply and fixing Magnetic Catcher of suitable size fixed for cabin leafs, drawers etc,
Supply and fixing stainless steel roller of size 25mm x 12mm, 450mm lenth with male female rolling brackets suitable for baskets complete all as specified and directed, Make : Evershine, Olive or equivalent
Supply and fixing Stainless steel perforated cutlery basket of size 520mm width, 485mm depth and 100mm height complete all as specified and directed. Make : Evershine, Sleek or equivalent
Supply and fixing Stainless steel Cup & Saucer basket of size 520mm width, 485mm depth and 100mm height complete all as specified and directed.
Supply and fixing Stainless steel designer Pull out detergent basket of size 100mm width, 485mm depth and 430mm height complete all as specified and directed.
Supply and fixing Stainless steel designer plate basket of size 520mm width, 485mm depth and 150mm height complete all as specified and directed.
Supply and fixing Stainless steel designer pull out basket of size 810mm width, 485mm depth and 200mm height complete all as specified and directed.
Supply and fixing Stainless steel designer Gas removal mesh of size 200mm width and 100mm height complete all as specified and directed.
Material and labour for second class hard wood plain fillets, square in section, clean sawn, secured with screws exc 13 & not exc 25 sqcm complete all as specified and as directed.
Material and labour for french polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and directed.
Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10 cm with or girth, complete all as specified and directed.
Material and labour for two coats of synthetic enamel paint to new steel surface including preparation of surfaces exceeding 10 cm with or girth, complete all as specified and directed.
Supply and fixing for aluminium powder coated aluminium window shutter having two/three track with aluminium section top & side members of shutter section shall be of size 18.00x40.00x1.55 (Section No 20736), shutter interlock section shall be of size 18.00x40.00x1.45 (Section 20737) and mounted on bearing to slide on tracks plain anodized in approved shade including supply and fixing of PVC track gasket, EPDM rubber gasket on glass of weather tightening alongwith locks, handle including sealing gap between wall and around window/ventilators frame with silicon sealants making it water proff in all manner etc, complete all as specified and directed by engineer-in-Charge (Min thickness of powder coating 50 micron). Note : Section No given are of make Jindal Contractor may use the similar section of any other make mentioned in Appx 'A'.
Material and labour for filling gap between wall and roofing (pre-galvanised sheet) with cement concrete 1:3:6 type-B0 (using 12.5mm graded aggregate) inner and outer face of wall including 10mm rendering in cement mortar (1:6), complete all as specified and directed. Note : - 1. Rates quoted are deemed to be include necessary scaffoldings, form work etc to carry out repair upto any height of bldg. 2. Measurement of repair work will be taken and paid from one side i.e. inner face only.
INTERNAL ELECTRIFICATION
Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) complete including all electrical fittings & fixtures(DBs, submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete all as specified and directed.
Material and labour for Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed copper wire 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unsheathed FRLS copper wire cable 1100 volts grade of size 1.5 sqmm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green) (a) One light/fan point controlled by one way switch 6 amps 240 volts
(b) One light point controlled by two way switch 6 amps 240 volts
(c) One bell point controlled by one bell push switch 6 amps 240 volts
(d) One 3 pin 6 Amps switch socket out let point on independent Board
(e) One 3 pin 6 Amps switch socket out let point on same board
Material and labour for Point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed copper wire 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unsheathed FRLS copper wire 1100 volts grade of size 2.5 Sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets 16 Amps, 240 volts :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)
Supply and fixing in repair modular one way switch 6 Amp 240 volt marked light/fan suitable for one module etc complete as specified and directed.
Supply and fixing in repair modular two way switch 6 Amp 240 volt suitable for one module etc complete as specified and directed.
Supply and fixing in repair modular 6 Amp 5 pin universal socket suitable for two module, 240 volts complete all as specified and directed.
Supply and fixing in repair modular switch one way 16 Amps 240 volts suitable for one module complete as specified and directed.
Supply and fixing in repair modular 6/16 Amp socket suitable for two model , 250 volts complete all as specified and directed.
Supply and fixing in repair modular step type two module fan regulator suitable for 120 watt 250 volts complete as specified and directed.
Material and labour for ceiling rose in repair with three terminal as per relevant IS complete as specified and directed. Make : SSK/havells/legrand
Supply and fixing in repair modular bell push switch with indicator 6 Amp 240 volte suitable for one model etc complete as specified and directed.
Supply and fixing in repair bell electric AC, 230V, Single phase, Dingdong type complete all as specified and directed.
Supply and fixing decorative box type fitting with blue colour end cap for LED tube 20 watt luminaire for 230 volt AC incl LED tube 20 watt complete all as specified and approved.
Supply and fixing mirror light sleek LED mirror light10Watt provided with high output diffuser with suitable capacity driver with all comptonants as per manufacturer etc complete as specified and directed. Make - Crompton, Havells or equivalent approved by GE.
Supply and fixing surface mounted round type energy saving ceiling mounted decorative LED 8 watt luminair with opal diffuser for soft light with suitable driver etc complete as specified and directed. Make - Crompton havells or equivalent approved by GE.
Supply and fixing Energy saving new generation 10 W LED IP 65 bulkhead luminair complete as specified and directed. Make - C&S , crompton ,havells or equivalent approved by GE.
Supply and fixing Decorative type lamp holder suitable for pin type LED 10 watt incl lampe etc complete as specified and directed. Make - Anchor or equivalent as approved by EIC.
Disconnecting all water and electric connections of geysers and taking down carefully installed storage type electric geysers of any capacity of any make/type/size (horizontal/vertical) lowering and setting aside opening geysers examining and checking thoroughly for requisite repair/ replacement of defective/worn-out/ unserviceable components/ parts materials including preparing inventory for each geyser separately in presence of Engineer-in-Charge and removing all scale and dirt de-scaling of deposited in inner copper tank and outer tank and heating elements by HCL or aqua clear pedilite solution, thermostat, indicator lamp, assemble checking electrical connection, stopping of minor leaking by soldering/brazing of the inner copper tank and replacement of defective worn out unserviceable components/parts and painting of geyser 50 ltrs after scraping, cleaning, knotting and stopping including preparation of surface of geyser and rubbing with emery paper for painting with one coat of duco paint by spray painting mation to achieve glossy finish of approved make first quality and re write MES No. on the body of geyser with black synthetic enamel paint (letters and figures 2cm high) & re-fixing geyser in its original location including hoisting, connecting to water & electric connection and testing for proper functioning of geysers including earthing to the entire satisfaction of the Engineer-in-Charge including the replacement of the following items etc complete all as specified and directed. (a) Supply only Fiber reinforced PVC nylon pipe heavy duty size 450 mm long 15mm bore with brass coupling chromium plated with rubber washers as both ends as per IS.-01 Nos (b) Supply only Flexible chromium plated connection pipe size 450 mm long 15 mm bore with brass chromium plates coupling suitable for geyser any capacity-01 Nos
Taking down carefully ceiling fan any type, sweep and make for overhauling including dismantling of blade frame and opening and examining motor cleaning of dust/dirt of fan cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively and reassembling of complete fan after re-fixing parts in its original location and hanging connecting and testing ceiling fan for smooth functioning incl replacement of rubber real insulator,split pin,nut,bolt, washer, 3 core flexible cable from connector to ceiling rose, and painting with one coat of synthetic enamel paint with spray painting machine & marking MES No. with black paint complete.
Taking down carefully exhaust fan any sweep and make, dismantling of blades, frame and opening and examining fan motor, cleaning of dust/.dirt of fan, cleaning and greasing of ball bearing and bushes with fresh oil and best quality of grease respectively, including applying synthetic enamel paint to achieve glossy finish approved coloured as directed by Engineer-in-Charge and marking MES No with black paint and reassembling of complete fan and re-fixing in its original location making connection with replacement of rubber real insulator,split pin,nut,bolt, washer, 3 core flexible cable from connector to ceiling rose and testing to the entire satisfaction of Engineer-in-Charge complete.
Material and labour for takaing down unserviceable sub main wiring any size any location with all accessories etc complete as specified and directed by EIC.
Material and labour for Sub main wiring with PVC insulated FRLS cable LT 1100 Volts grade with stranded copper conductor and drawn into and including non metalic rigid medium grade PVC concealed counduit with all accessories alongwith one contineous earth wire and connected to comman earth dolly of size 2x10 sqmm (2 single run) with one contineous copper earthing lead wire of 10.0 sqmm etc complete all as specified & directed. Note: Two run of main wire and one run of earth wire along with PVC conduit shall be measured as unit length.
Material and labour for Sub main wiring with PVC insulated FRLS cable LT 1100 Volts grade with stranded copper conductor and drawn into and including non metalic rigid medium grade PVC concealed counduit with all accessories alongwith one contineous earth wire and connected to comman earth dolly of size 2x6 sqmm (2single run) with one eontineous copper earthing lead wire of 6 sqmm etc complete all as specified & directed. Note: Two run of main wire and one run of earth wire along with PVC conduit shal be measured as unit lenth.
Disconnecting and taking down unserviceable DB with all accessories from existing position of any size, any way, any capacity etc complete as specified and directed
Material and labour for epoxy powder coated or polystrene insulated material sheet metal enclosure, factory made (double door) 4 way VTPN suitable for MCCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush mounting complete all as specified and directed.
Material and labour for epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 12 way SPN suitable for MCB DB's 230 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush mounting complete all as specified and directed.
Material and labour for MCCB 3 pole 100 Amps 16 KA working on 415 Volts 50 HZ AC supply, all as specified and directed.
Material and labour for MCB single pole 40-63 Amps 10 KA working on 240 Volts `C' curve 50 HZ AC supply, all as specified and directed.
Material and labour for MCB SPN 63 Amps 10 KA working on 230 Volts `C' curve, 50 HZ AC supply, all as specified and directed.
Material and labour for MCB SP 6A to 32A Amps 10 KA working on 230 Volts ,`C' curve, 50 HZ AC supply, all as specified and directed.
Supply and fixing safety AC power units with 25 Amp starter incl 4 model plate, 25 A plug & socket, PVC box for mounting of power unit suitable for 25 Amp power unite and connection of electric supply and testing complete etc as specified and directed. Make- L&T model No OS61W25 or equivalant as approved by GE.
Material and labour for for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.25 mtr below normal ground level, connected to galvanized iron wire 4mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh, and 40 mm dia GI light grade earth lead protection pipe incl taking down old one, complete all as specified and directed. NOTE - The cost of earth strip upto and including 7.5 mtr only from the top of earth electrode are deemed to be included under this item and additional earth lead, if any, required at site shall be measured and paid for separately under appropriate item of Schedule `A’.
EXTERNAL ELECTRIFICATION
Supply, laying, jointing, testing, XLPE insulated and PVC sheathed with stranded aluminium conductor heavy duty, LT cable 1100 volts grade, armoured cable, conforming to IS 1554 Part I / ISI marked, including cable glands, cable lugs etc, to suitable the cable size, cables to be laid in trenches, fixed along the poles bare or through GI pipe laid under floors road etc fixed concealed in walls encased in GI pipe etc complete of sizes 35 Sqmm 3.5 core
Excavation in trenches, not exc 1.5 m wide and not exc 1.5m depth and getting out in for foundation of pole,stay,laying of cable and pipe in any type of soil etc all as specified and directed
Returing, filling in incl spreading, levelling, watering and well ramming in layers not exc 25cm thick after laying of the cables,jointing & testing complete all as specified and directed.
Removing excavated material to a distance not exc 50 m & depositing where directed at a level not exc 1.50 m above the starting point complete as specified and directed.
Material and labour for sand cushioning in trenches spreading and consolidation 8 cm thick before laying the cable and 15 cm of the sand after laying the cable but will be measured 18 cm after punning etc complete as specified and directed.
Material and labour for laying of bricks well burnt sub class B (old pattern) laid flat for cable protection width equal to the length of bricks complete all as specified and directed.
Supply and fixing in repair galvanised iron tube 'light grade' for protection of copper strip at wall and duct/road/trench for 32 mm dia of pipe complete all as specified and directed.
M/S BASHIR AHMAD TANTARY
M/S Abdul Ahad Rather
M/S BASHIR AND SONS
M/S WANI AND SONS
M/S Thakur & Sons
M/S SUHEEL CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .