ADDITION/ALTERATION AND SPECIAL REPAIR TO BLDG NO P-153 (JUNIOR SAILORS IN LIVING BLOCK INCLUDING SHIP GALLEY) AT INHS NIVARINI AT INS CHILKA UNDER GE CHILKA

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkat with shutters exceeding 1.5 sqm but not exceeding 4.0 sqm (without taking off shutters from the frames) complete all as specified and as directed.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium sliding window and ventilator shutters without sash bar, aluminium section minimum weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, locking arrangement and aluminium anodised fittings including all other accossorises etc complete all as specified and as directed. Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium door shutters of side hung type with aluminium sections minimum weighing 1.00 Kg/m including necessary joining cleats, glazing clips, rubber paking, anodised aluminium snap beading, neoprene packing, screws,anodised aluminium fittings such as handles 2 Nos and 4 Nos hinges in each shutter, tower bolt 150mm long 2 Nos etc complete all as specified and as directed. Note :- Glass or particle boards shall be measured and paid seperately under respective item as considered therein.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to aluminium windows complete all as specified and as directed.

M&L 12 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to aluminium door frame work complete all as specified and as directed.

S&F Aluminium body(Die cast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

S&F 250 mm long, aluminium alloy,anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with beat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined toghther with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S&F 150 mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

S&F 140mm overall length of cover plate of floor door stopper of aluminium alloy body and tougue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality in squares not exceeding 0.5 sqm each pane for fixing to aluminium or wooden joinery work complete all as specified and as directed.

S&F 4 mm thick figured glass, pin head type , in squares not exceeding 0.5 sqm each pane for fixing to aluminium or wooden joinery work complete all as specified and as directed.

S&F Aluminium anodised powder coated of any colour (thickness of powder coating not less than 50 micron) Deco grill DG 202 with aperature size 60mmX45 mm fixed with suitable channel to windows/ventelator and other fixing arrangements complete all as specified and as directed.

S&F 5.5 mm thick frosted glass, ordinary quality in squares exceeding 0.5 sqm each pane for fixing to aluminium or wooden joinery work complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bend with access door complete all as specified & directed.

S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) branch pieces single Y equal or unequal complete all as specified and directed

S&F 110 mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bend with access door complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) branch pieces single Y equal or unequal complete all as specified and directed

S&F 75mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply only in repair stack clamps for 110 mm pipe made out of 50 mmx 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

Supply only in repair stack clamps for 75 mm pipe made out of 50 mmx 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

Fixing only 15 mm bore old galvanised iron steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed.

Fixing only 20 mm bore old galvanised iron steel tubing and connections in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.

S&F 15 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F 20 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.

S&F in repair 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) ,white including fixing bolts (excluding flushing cistern & Pipe) including necessary connection to trap and flushing pipe complete all as specified and as directed.

S&F in repair health faucet 1.5m tube with hook and including all necessary fitting complete all as specified and as directed. Make:- Prayag Cat No 1881

S&F in repair PVC low level flushing cistern of 10 litre capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repairs PVC seat cover white colour with flat bottom including CP hinges complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600mm complete all as specified and as directed.

S&F in repair grating doom 125 mm dia of PTMT (minimum weight 40 gms) complete all as specified and as directed.

S&F in repair 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repair 15 mm bore dia stop valves ,cast copper alloy screwed down, high presure , with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair 15 mm bore dia stop valves ,fancy type , chromium plated with long shank and cup (concealed type) , with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repair Brass chromium plated shower rose of size 125 mm with swivel joint for fixing to GI pipe of 15mm dia complete all as specified and directed.

S&F in repair 15mm bore dia, Bib taps chromium plated , fancy type screwed down for iron pipe and fixed complete all as specified and directed. .

S&F in repair 15 mm bore , Bib tap standered of PTMT any colour screwed, for iron pipe and fixed (minimum weight - 90gms) complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 630mm X 450mm with brackets complete all as specified and as directed.

S&F in repair waste coupling suitable for 40 mm bore dia of pipe of PTMT (half or full threaded) (minimum weight -60 gms) complete all as specified and as directed.

S&F 32 mm dia size PVC waste pipe with cup head for wash hand basin/sink/urinal complete all as specified and as directed. Make :- Prayag cat No 329.

S&F in repair Brass chromium plated tubular towal rail, 20mm dia , D type, 600mm long complete all as specified and directed.

S&F in repair 15 mm bore dia CP pillar tap of cast copper alloy, fancy type screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair vitreous china urinal bowl flat back of size 465 X 355 X 265mm white (minimum) with grating,union and waste coupling including fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and as directed.

S&F in repair 100 mm diameter of outlet of Cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not packing) removing of serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and applying cement slurry @3 kg/Sqm complete all as specified and as directed.

M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300mmx200mmx 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Demolition of brick or stone masonary work built in cement mortar including all quoins ,arches,pillars etc complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan to any radius as in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Taking down existing waterproofing treatment complete of any description from brick or RCC wall and RCC slab by scrapping including removal of rubbish where directed to a distance not exceeding 100M complete all as specified and as directed.

M&L for 10mm thick screed bed or bedding layer in cement mortar 1:4 on concrete,brick surfaces surface finished even and smooth without using extra cement to receive roof treatment, mixed with water proofing compound @2% by weight of cement over and including a neat cement slurry @ 3 Kg/Sqm , complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately under respective item.

M&L for water proofing roof treatment with APP based polymeric membrane of minimum weighing 3kg and minimum 3 mm thick and reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including priming the surface by bitumineous [email protected] litre per Sqm,applying with a coat of hot blown bitumen of grade 85/25 @ 1.2 kg/Sqm each at bottom and top of the membrane as bonding material and a coat of bituminous based aluminium primer @ 100 gm/Sqm on top including sealing all joints by thermo fusion complete all as per manufacturer's instructions complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or on concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L 15 mm thick rendering on brick work, concrete surfaces or stone wall surface in cement mortar 1:4 mixed with water proofing compound @ 3% by weight of cement , surface finished even and fair complete all as specified and as directed. Note:-Water proofing compound shall be measured and paid separately under respective item.

M&L 10 mm thick rendering on of brickwork or concrete surfaces in cement mortar 1:4 on wall ,surface finished even and fair complete all as specified and as directed.

M&L 5 mm thick rendering on of brickwork or concrete surfaces in cement mortar 1:3 on ceiling ,surface finished even and fair complete all as specified and as directed.

M&L for applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of silver steak shade of asian paint over a coat of primer on prepared external surfaces of walls of any description over 10 cm width or girth including applying 1 mm thick wall care putty complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty on newly plastered surfaces of wall complete all as specified and as directed.

M&L for applying three coat of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty including complete removal of existing old decorated surface of wall complete all as specified and as directed.

M&L for applying one coat of white on wall including preperation of old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc complete all as specified and as directed.

M&L for preparation of old plastered decorated surfaces of external walls by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots of any description over 10cm width / girth and applying one coat of weather proof acrylic emulsion paint, exterior grade (100% acrylic first quality) of approved shade as per manufacturers instructions and also rewrite the bldg No. as per existing font style and size with enamel paintof approved shade complete all as specified and as directed.

Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.

Rounding for edges of stone slab one edge, such as in steps cooking platform and other similar work complete all as specified and as directed.

Demolition of cement concrete (unreinforced) as roofs, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work etc complete all as specified and as directed.

M&L for water proofing treatment to sunken surface complete all as specified and as directed with the followings specification:- (i) 10 mm thick rendering in cement mortar 1:4 mixed with and including water proofing compound @3% by weight of cement (ii) Applying evenly a coat of bituminous primer @ 0.5 liter per sqm (iii) Applying evenly a tack coat of industrial Bitumen 85/25 at the rate of 1.2 Kg per sqm over the prepared surfaces. (iv) Apply APP modified polymeric membrane of weight not less than 3.0 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions.

M&L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in mass concrete as in sunken filling complete all as specified and as directed.

M&L 50mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in Sunken floor finishing cement concrete surface even and fair without using extra cement mixed with water proofing compound @ 3% by weight of cement complete all as specified and as directed. Note : WPC shall be measured and paid separately under respactive item.

S&F 1000 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet, overflow and wash out connections complete all as specified and as directed.

S&F 25 mm bore dia ball valve , high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed (mininimum weight -455 gms) complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

S&F in repair 15 mm bore angle stop valve,cast copper alloy, chromium plated, screwed down,high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.

S&F in repair stainless steel sink with draining board made out of 1.0 mm thick sheet for kitchen with plug , washers waste pipe , cast iron cantilever brackets connecting union over all size 915mmX460mm with bowl size 410mmX330mmX160mm complete all as specified and as directed .

S&F in repair soap tray fixed with screw to the wall complete all as specified and as directed. Make : -Prayag Cat No BA-05 .

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

M&L for applying two coat of white washing on ceiling including preparation of old decorated surface of ceiling complete all specified and directed,

Taking down carefully copper/ aluminium point wiring for light, fan, socket or power point complete with fittings such as switches, fan regulators, light fittings, tube light fittings, bracket light fittings and ceilling rose, holders etc including making good the disturbed surface of walls,ceiling etc complete all as specified and as directed.

M & L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor cable of size 1.5 sqmm drawn through in including concealed PVC conduit not less than 20mm dia with pressed steel concealed box made out of mild steel sheet not less than 1.6 mm thick sheet duly covered with 3 mm thick laminated sheet ISI marked suitable ffor mounting switch,socket etc and all accessories including 1.5 sqmm copper conductor FRLS cable for earth continuity conductor of green colour for one light point/ fan point/ exhaust fan/ bell point/one 5/6 Amp socket outlet controlled by one 5/6 Amps one way switch complete all as specified and as directed.

All as per item No 101 above but for one light point of stair case controlled by two 2- way switch complete all as specified and as directed.

All as per item No. 101 here-in-before but for 15/16Amp socket out let, independent with 2.5 sqmm copper cable of PVC FRLS insulated, unsheathed, multi stranded and 2.5 sqmm copper conductor cable FRLS as earth continuity conductor of green colour complete all as specified and as directed.

Taking down carefully sub main wiring including batten/ conduit by unscrewing from wall,ceiling and making good surfaces to match with existing complete all as specified and as directed.

M&L sub main wiring with two runs of 4 sqmm PVC FRLS insulated unsheathed copper cable multistand 1100 Volt and one run of copper earth wire 4 sqmm PVC FRLS drawn in and including concealed conduit not less than 25mm dia including making good to existing surface complete all as specified and as directed. Note:- 2 runs of 4 sqmm copper cable, one run of 4 sqmm copper earth wire and one run of conduit shall be measured as one unit length.

M&L sub main wiring with two runs of 6 sqmm PVC FRLS insulated unsheathed copper cable multistand 1100 Volt and one run of copper earth wire 6 sqmm PVC FRLS drawn in and including concealed conduit not less than 25mm dia including making good to existing surface complete all as specified and as directed. Note:- 2 runs of 6 sqmm copper cable, one run of 6 sqmm copper earth wire and one run of conduit shall be measured as one unit length.

M&L sub main wiring with four runs of 6 sqmm PVC FRLS insulated unsheathed copper cable multistand 1100 Volt and one run of copper earth wire 6 sqmm PVC FRLS drawn in and including concealed conduit not less than 32 mm dia including making good to existing surface complete all as specified and as directed. Note:- 4 runs of 6 sqmm copper cable, one run of 6 sqmm copper earth wire and one run of conduit shall be measured as one unit length.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.

S&F switch piano, flush type, single pole, two way, 5/6 Amp, complete all as specified and as directed.

S&F switch socket combination 2 pin & 3 pin 5 Amp, 230 volt, multipurpose, complete all as specified and as directed.

S&F switch socket combination 5 in 1 type, 3 pin 5 / 15 Amp, 230 volt, multipurpose, complete all as specified and as directed.

S&F ceiling rose, surface Bakelite 65mm x 30mm, three terminals including PVC mounting box of size 3'x3' complete all as specified and as directed.

S&F five stepped socket type electronic fan regulator for ceiling fan of any sweep including necessary connection complete all as specified and as directed.

M&L for spray painting with white synthetic enamel paint including preparation of old surface of the ceiling fan of any make/model/sweep, filling cavities with filler after cleaning dust in situ or in other position complete all as specified and as directed. Make :- Berger paint(Luxol)/Asian paint (Apcolite) / Jenson & Nicholson paint Ltd (Brolac)

Taking down defective ceiling fan from its position and refixing the same after necessary minor repair to make its functional complete all as specified and as directed.

M&L for rewinding of ceiling fan motor of 1200 mm sweep of any make with super enameled copper wire of existing gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts and washers, split pins etc complete all as specified and as directed

S&F in replacement of ball bearing 6201 / 6202 / 6203 including metal filling, machining if required complete all as specified and as directed. Make :- SKF/NBC as approved

S&F in replacement of canopy (upper and lower) to match the existing make /model of ceiling fan as per site complete all as specified and as directed.

S&F in replacement of gun metal bush, suitable for any make and sweep ceiling fan complete as specified and as directed .

S&F in replacement of fan clamp with nuts , bolts and rubber bush suitable for ceiling fan of any sweep and make complete all as specified and as directed.

S&F in repair capacitor/ condenser of ceiling fan 2.5 mfd of approved make complete all as specified and as directed. Make :- Nicco/Havells/Universal

S&F Exhaust fan 300 mm sweep, 900 RPM, metal body heavy duty, AC single phase,230 V including louvers and necessary connection with multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing complete all as specified and as directed . Make :- Bajaj /Havells/Crompton Greaves /Khaitan/Almonard as approved.

S&F Exhaust fan 450mm sweep, 1400 RPM, metal body heavy duty, AC single phase,230 V including louvers and necessary connection with multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing complete all as specified and as directed . Make :- Bajaj /Havells/Crompton Greaves /Khaitan/Almonard as approved.

S&F 1X18 Watt tube light fittings with lamp Endura linear LED wall mounted LED batten, extruded aluminium heat shrink provided for efficient heat dissipation and intergrated electronic driver complete with LED retrofit T8 polycarbonate tube of capacity 18 Watt with decorative holder including connection with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make:- Philips Cat Part No.BN021CLED22S PSU CW GR or Havells Cat Part No LUMILINEBS18WLED865SPCWH as approved.

S&F 9 W LED tubelight fitting with lamp, Endura linear LED wall mounted LED batten, exruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver with complete fitting including connection with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make: Havells Cat Part No LUMILINEBS9WLED865SPCWH or equivalent in Bajaj/Philips as approved.

S&F 1x28/30 watt indoor type 2x2 recess mounted LED luminaries with high brightness including connecting up with twisted flexible copper conductor cable with suitable size upto ceiling rose complete all as specified and as directed. Make : Havells Cat Part No. PLUTONEO2X2PLR28WLED857S and BAJAJ cat No BZRSQL 30W GZI WH or equivalent in Philips or Wipro as approved.

Taking down carefully existing unserviceable MCB DBs with MCBs any type by unscrewing from wall,ceiling and making good surfaces to match with the existing complete all as specified and as directed.

S&F factory made sheet metal enclosure for DBs double door fixed flush to the wall, SPN, 240 volt, 8 way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells

S&F sheet metal enclosure single pole and neutral with two pin and earth plug and socket complete with on single pole MCB 20 Amp complete complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F MCB 32 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F Factory made sheet metal enclosure for DBs double door (fixed flush to the wall), TPN, 415 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 6.0 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F factory made sheet metal enclosure for DBs double door fixed flush to the wall, SPN, 240 volt, 4 way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells

Taking down carefully old unserviceable MCB any type by unscrewing from wall, ceiling and making good surfaces to match with existing complete all as specified and as directed.

S&F 100 Amp isolator four pole , 415 Volt, 50 Hz complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F 63 Amp MCB,triple pole and neutral ,415 Volt, 50 Hz complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F Vertical type DBs with MCCB 8 way including provn of 250 Amp MCCB, 4 pole,36 KA as Incomer complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.

S&F in replacement of 200 Amp MCCB , 4 Pole, 36 KA,415 V, 50 Hz. Complete all as specifed and as directed. Make:- C&S Electric Ltd/Standard/Havells.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 M deep below ground level ) with top edge of the plate not less than 1.5 M below normal ground level, connected to galvanised earth lead wire 4.0 mm dia upto 7.5 M in length from earth plate by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-2009, connected to earthing with DBs all as specified including excavation and earth work in any type of soil, PCC 1:3:6 type C-1 using 20mm graded stone aggregate in chamber and 40mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab, reinforced, with 8mm dia TMT bar at 150mm c/c both ways, 15mm dia GI pipe light grade for earth lead protection, 20mm dia GI medium grade pipe for watering , funnel etc complete all as specified and testing on completion.

S&F in replacement of LED street light 25Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07 complete all as specified and as directed . Make :- Bajaj Cat Part No. ENXT P 30L WH CRPCSD 25W or Havells Cat Part No VILUNASUNDOWNSL25WLED765PASYBOPCIHD or as approved.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung type , without sash bar aluminium section minimum weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stay 150 mm long 01 No, 100 mm , anodised aluminium alloy butt hinge type B-21 , 02 Nos, aluminium handle of suitable size 01 No and other necessary accessories complete all as specified and as directed. Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein.

M&L 75 mm thick cement concret 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection including necessary use and waste of form work complete all as specified and as directed.

ANTARYAMI PANDA AND COMPANY

D RAVICHANDRAN