PROVN OF ROAD FURNITURE, CERTAIN REVENUE AND MINOR WKS AT VARIOUS LOCATION IN RMS

Amount

Demolition of cement concrete in ground floor,paving nexc 15cm thick(below or above GL) complete all as specified and directed.

Surface excavtion n exc 30 cm deep and average 15 cm deep and getting out soft and loose soil.

Excavation over areas n.exc 1.5m deep & getting out soft/loose soil

Excavation over areas exc 1.5m deep & n.exc 3 m deep and getting out in soft/loose soil

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for fdn, n.exc 10 sq m on plan and n.exc 1.5m in depth and getting out in soft/loose soil.

Returning, filling in trenches including shearing , leveling, watering in layers n.exc 25cm thick soft loose soil complete all as specified and directed.

Removal of excavated soil n.exc 50mtr distance and depositing where directed n.exc 1.5m above the starting point complete all as specified and directed.

M&L loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells of broken bricks.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L for hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick broken stone, water and ramed to atrue surfaces complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone)as in fdn filling mass concrete complete all as specified and directed.

M & L for 100 mm thick PCC 1:4:8 , D2 (40mm graded crushed stone aggregate ) as in sub-base coarse complete all as specified and directed.

150mm tk PCC 1:4:8 type B1 using 40mm graded stone agg as in fdn of Septic Tank

Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in concrete bed to drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid down and tested complete

M&L Brick work with sub class B brick straight or curved on plan exc 6.00 m mean radious built in CM 1:6 complete all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6mtr mean radius built in cement mortar (1:4) complete all as specified.

M&L for brickwork with sub-class 'B' Bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Material and labour for brickwork in cement mortar 1:4 with sub class `B' bricks in one brick thick honey comb walling,etc

M & L 25mm thick PCC 1:2:4 B0 (12.5mm graded crushed stone aggregate ) as in Damp proof course to horizontal or vertical surfaces including necessary form work complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in band coping bed plate, benching etc including slightly rounded of chamfered angle, throating, etc complete all as specified and as directed.

PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in channels of man holes.

M&L for PCC 1:2:4 type C-1 (using 20mm graded stone) as in filling and mass concrete with WPC 2% by weigth of cement.

Material and labour RCC (Nominal Mix) in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs of drains, manholes, septic tanks, soakage wells etc. complete all as specified & as directed by Engineer-in-charge. Note: - Reinforcement shall be measured and paid for separately.

M&L for RCC (nominal mix) type B1 (1:2:4 ) using 20mm gradede stone aggreagate as in foundation includingrafts footing foundation beams plinth beams bases for columns etc basement slabs under -reamed piles all as specified and directed by Engr-in-charge.

M&L for RCC (nominal mix) type B1 (1:2:4 ) 20mm gradede stone aggreagate as in beams,contilever, bressummers, lintel over1.5mtr span.

All as per Item No-27 but as in columns, piers, pillars, struts, etc

M&L for RCC (nominal mix) M-20 using 20mm gradede stone aggreagate as in foundation includingrafts footing foundation beams plinth beams bases for columns etc basement slabs under -reamed piles all as specified and directed by Engr-in-charge.

M&L RCC type M-20 (nominal mix ) 20 mm graded stone aggreagate in columns pillars ,piers posts and struts etc.

M&L for RCC (nominal mix) M-20 using 20mm gradede stone aggreagate as in lintel /band supported on walls ,beams and columns in floors roofs , landing ,balconies canopies ,deck slabs and in shelves and the like

M&L for cement concerte 75mm thick 1:3:6 type C-2 (using 40 mm graded) as in plinth protection, sub base of floor finished smooth and even without using extra cement

M&L PCC 1:3:6 type C2 40mm graded aggregate as in foundation of man holes, etc

M&L PCC 1:3:6 type C2 40mm graded aggregate as in foundation of man holes, septic tank etc

M&L for PCC 1:3:6 type C-2(40mm grade stone aggregate)as in bed to 150mm dia PVC drain pipes including packing under and haunching against the sides of pipes after they are laid and tested.

M & L cement concerte in surface channels and drains type C-2 1:3:6 using 20mm graded aggregate

Extra for forming fair finished drain or channel 30 cm girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed aluminium grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified.

S&F for 30 mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S &F for 2nd class hardwood 30mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a)

Second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats. all as specified.

S&F for galvanised mild steel wire cloth,0.56mm nominal dia of wire and average widthof aperture1.18mm and fixed with tinnedtracks, or galvanised wire staples.

M&L mild steel work post, truss, purlin etc confirming to Fe 410-w grade E 250 quality B

S & F for bands, straps, supports or stays for rainwater, ventilating pipes, incl bolts, if reqd : hooks (say), heavy, for large gates, hook and pintle hinges : large hasps and staples; chains; hand made sliding bolts ; clamps; hold fasts; waal ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts,; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde E-165

S & F for steel work in tubular trusses including special shaped washer etc, coplete using ERW or induction butt welded tubes conforming to ISI 1161-1998 grade st-240 complete all as specified and directed.

S&F for framed brackets of angles or Tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary, gusset plates, riveting etc n.exc 10 kg each brackets, conforming Fe- 290. Gde -E-165 (brackets over 10 kg each to be measured under structural steel.

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long

M&L for framed work as grills, gratings, guard bars and similar articals, conforming to Fe-290 (Gde-E-165) complete all as specified and directed

M & L formwork to sides and soffits of floor or roof beams,beam haunchings, girders, bressumers, lintels, cantilever, shelves including supports, overhangs, etc also splys between floors and beams etc compete all as specified directed.

S&F form work to sides of rough finished surfaces of concrete , foundation, footings base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to butter

S&F Form work to sides of pillars, Posts, struts, piers, columns and stanchions of rough finished flat surfaces of concrete of flat or curved .

M&L for use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L Formwork to sides of concrete in foundation ,footing ,bases for columns ,rafts and raft beams ,sides and soffits or foundation and plinth beams and similar work

M&L reinforcement TMT bars 10 mm and above dia, cut to length, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 for stretched wire complete all as specified and directed.

M&L reinforcement TMT bars 5mm to 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders, bent to shape required including cranking required and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410 Gde E-250 complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. NOTE : Water proofing compound shall be measured and paid separately.

15mm thick cement plaster in cement mortar (1:6) on other than fair face of brick surface finished even and smooth without using extra cement.

M & L 12mm thick rendering on fair faces of brick wk or concrete surface in CM 1:3 with using water proofing compound 2% by wrought all as specified (WPC paid separately).

M&L for 10mm thick plaster in CM 1:6 on other than fair face of brick work finished even and smooth without using extra cement.

M & L 10 mm thick rendering other than fair faces of brick wk or concrete surface in CM 1:4 without using extra cement or lime.

M&L 12 mm tk cement plastering in CM 1:3 as in wall/floor of septic tank

Supply only integral water proofing compound.

S&F Non skid ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement

S&F Glazed ceramic floor tiles of 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement

All as per item No 66 hereinbefore but in skirting including 10mm thick plastering for backing coat in cement mortar 1:4

S&F Non - skid coloured ceramic tiles of size 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc with 15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM (1:6), set and jointed in neat cement slurry and pointed in coloured cement

M&L 10mm thick rendering on brick work or concrete surfaces as backing coat in CM 1:4 surface prepare to receive wall complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed with grey cement and pigment and pointed in neat cement slurry in floors over 15 mm thick screed bed complete all as specified and directed.

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

M&L for ceramic coloured printed tiles of size 300x200mmx7 mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured.

M&L PCC 1:3:6 Type C-2 (using 40mm graded stone aggregate) as in plinth protection, foot path, paved area, etc finished even and fair without using extra cement 75mm thick complete all as specified and directed.

S&F Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube,supplying and fixing in opening as per specification and drawing.

Material and labour factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles plain colour PVC sheets for top rail, lock rail and bootom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame, welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site with three nos of MS higes medium grade.

S&F for 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed.

S&F for butt hinges, medium weight coldrolled mild steel and fixed 100mm size

S&F for butt hinges, medium weight, cold rolled mild steel, 75 mm size.

S&F 150 mm long aluminium anodised tower bolts.

S&F for 125 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F 100 mm long aluminium anodised handles cast copper.

S&F for 125 mm Aluminium handles, cast type, anodised

S&F for 150 mm Aluminium handles, cast type, anodised

S&F for steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed.

M/L sheet glass, obscured or frosted 3mm thick and glazing with oil putty in squares. nexc 0.5 Sqm each

S&F for glass 3mm thick, ordinary quality and glazing with oil putty/beads in required size in squares not exceeding 0.5Sqm in each pane complete.

S&F for 15mm bore GI water tubing medium grade laid in floors or fixed in wall with GI fittings.

S&F for 20mm bore GI water tubing medium grade laid in floors or fixed in wall with GI fittings.

S&F PVC (SWR) 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floor all as per specified.

S&F for PVC (SWR) 75mm dia vent pipe single socketed in any length with rubber ring joints laid in trenches or in floor/wall

S&F PVC (SWR) 110mm dia bends in any radius.

S&F PVC (SWR) 75 mm dia bends in any radius.

S&F PVC (SWR) 110mm dia junction single T equal or un equalwith an floor

S&F of PVC (SWR) 75 mm dia pipe as per specification.

S&F of PVC (SWR) 75 mm dia vent cowl pipe as per specification.

S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, fancy type, 15 mm bore dia pipe.

S&F 15mm bore bib tape cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as per specified.

S&F 15mm bore cocealed stop cock, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe.

S&F 15mm bore angle stop cock, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe all as per specified.

S & F PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 ltrs capacity incl flush pipe complete all as specified.

S&F for vitrious china urinal, half stall type, white including flushing cistern, flush pipe and waste pipe. CP waste coupling complete.

S&F for PVC Connection pipe 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F for vitreous China wash down water closet (Orrissa pattern , white (excluding fixing bolts, flushig cistern and flush pipe)

S&F vitreous china wash basin, size 550 x 400mm white including brackets, and waste coupling & pipe of 32mm dia, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed

S&F soap dish, vitreous china white, aprox size 160 X 160 X 90 mm.

S&F for 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified.

S&F CP grating 100mm dia with waste hole.

S&F brass Choromium plated shower rose with or without swivel joints 125mm size including fixing to steel pipe or union complete.

S&F Rotational moulded polyethylene water storage tanks 500 ltr capacity(cylindrical vertical with closed top) hoisted and fixed in position with 20 mm ball brass valve and all as specified in SSR part -I

S&F for Rotational moulded polyethylene water storage tanks, 1000 ltr capacity(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part -I

Ball valve 20mm high pressure of PTMT with epoxy coatet alluminium rod & high density plastic ball screwed for iron pipe and fixed.

S&F 20mm gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed.

Salt glazed stone ware drain pipes 150mm bore class ‘A’ laid on concrete bed and jointed complete all as directed.

M&L for cutting chase for concealed water tubing and making good cutting n.exc 10 cm girth in CM 1:3 complete all as specified and directed.

Cutting into existing manhole/soakwell/septic tank making good to pipe and benching cutting out existing benching for and forming branch channel (half round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for internal dia size 150mm.

S&F for depth 0.70m – 1.65 m, DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid on 150 mm thick PCC 1:3:6 type C-2 including packing under and haunching against the sides of pipes bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional all as specified and directed.

Supply and fixing solar stud made of aluminium die cast Matte finish (Sand blasted), confirming to IS 617-1994 designation 4520 compresive strenght 179 kn with min 125 x 125 x 25 mm(Shank 65mm) tested as per IP 65 in accordance wiyh IS 12063 : 1987 category 2 for protection against water ingress, tested as per IEC 1215 (between -40 to 85 degrees centigrade) found be working satisfactorily for 125 hrs, tested as per QM 333 complete all as specified and as directed. Make :-3 M or equivalent.

Supply and fixing solar delineator (1000x47 mm) is made of polycarbonate and toughened aluminium alloy body, Height - 145mm, dia meter-80mm, comprises of 4 super bright LEDs which give 360 degree viewing angle, solar pannel 2.5 V, 120 mm (approx) 1.25V rechargbeable battery - 1 No incl of MS pipe 1m long with two coat of synthetic enamel paint embedded in PCC block of size 300x300x450mm made of 1:2:4 type B1 (using 20mm grade aggregrate) including necessary earth work complete all as specified and as directed. Make :-3 M or equivalent.

Supply and fixing high intensity reflective sheet 50mm wide of red & white/orange colour as required to be fixed on tubular steel poles or cemented poles or any other areas complete all as specified and directed. Make :-3 M or equivalent.

Supply and fixing portable speed breaker made of PVC of size 250 x 300 x 50mm Make :-3 M or equivalent.

S & F Convex mirror made up of PC materials having clear & definite mirror image, 130 degree of viewing angle of size 1000mm dia, provided on MS pipe 40 mm dia, 1.2 M long duly powder coated, embedded on PCC block 1:3:6 Type C-2 including necessary excavation and earthwork, complete as specified and as directed Make :- 3 M or equivalent.

M&L for preparation of new wall surafaces plastered or unplastered and applying three coat white wash on undecorated surfaces complete all as specified and directed.

M&L for preparation of preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying Two Coats of cement base paint complete all as specified and as directed.

M&L for preparation of new painted surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint complete all as specified.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint over a coat of primer all asspecified and directed

M & L for preparation of newly surfaces of walls and applying two coats of oil bound distemper (oil emulsion) over one coat of primer all as specified and as directed.

M&L for Point wiring complete with 1.5 Sqmm single core PVC insulated cable, with multi strnded copper conductors FRLSH 1100 volt grade, drawn through and including PVC casing and caping with all conduit accessories and making good to the disturbed surfaces of walls, ceiling, floors etc. to match with the existing surface ) and including provision of 1.5 Sqmm FRLSH PVC insulated copper cable as earth continiuty conductor connected to common earth dolly complete with PVC switch board for fixing switch socket etc as specified and as directed.Make:- Finolex/Richa/RR Kabel Make of caping/casing & PVC boxes :- Prestoplast/Finolex/supreme/Richa

One light point controlled by one, one way switch .

One Exhaust fan point controlled by one, one way switch.

One 3 pin socket outlet 5 Amps on the independent board.

All as per item No- 130.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.

M&L for Switch piano flush type single pole, one way 5A Make :Anchor/Plaza/SSK

M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make :Anchor/Plaza/SSK

M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting. Make :Anchor/Plaza/SSK

M&L for stepped type electronic fan regulator 100 watt socket size flush type on the existing phenolic laminatied sheet etc. Make :Anchor/Plaza/SSK

M&L for Socket outlet 2 in 1, 3 pin, 5A flush type complete all as specified and directed. Make :Anchor/Plaza/SSK

M&L for Switch Socket combination 2 in 1, 3 pin 5A/16A, 5 in 1 flush complete all as specified and directed. Make :Anchor/Plaza/SSK

M&L for 20W LED, 4', Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting incl taking down old unsv light fitting complete all as specified and as directed. Make : Havells Cat No LHFYBYPNIA1W022(batten) & LHLDDCXCML8P020(LED Tube) or equivalent in Bajaj/Philips

All as per item No 138 above but 09 watt LED 2', wall mounted with polycarbonate housing/batten. Make : Havells Cart No LHEXBLP71W009 or equivalent in Bajaj/Philips

M&L for LED 1x20W Security light fitting, drawn through including GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of suitable size from ceiling rose to the light fitting complete all as specified and directed. Make:- Havells Cat No Endurapearl SL20WLLED757SASYTOPCMP /Bajaj/Philips/CG

M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 6 sq mm, 2 core complete all as specified and as directed . Note: (i) Excavation and earth work , dand cushioning , cable protection cover, pipe etc shall be measured seperately under relevent items. Make : Richa/Polycab/Finolex

M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder coated, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Make:- Legrand Cat No 507611 or equivalent in ABB/Siemens

All as per Item No 143.00 here-in -before but MCB Distribution board double door type SPN 4 way complete all as specified and as directed. Make:- Legrand Cat No 507610 or equivalent in ABB/Siemens

M&L for MCB SPN 32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed. Make : Legrand Cat No 408617 or equivalent in ABB/Siemens

M&L for MCB SP 5-32 Amps 'C' series, 230 volts, 50 Hz suitable for fixing in MCB DB incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand Cat No 408587-95 or equivalent in ABB/Siemens

S&F for Ceiling fan 1200 mm sweep, 5 star rating including suitable size of fan hook and connecting up with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make : Bajaj/Usha/CG/V-Guard

S&F for fixing Exhaust fan, Metallic, AC single phase 230/ 240 volts of size 300 mm sweep with louvre shutter including anchor bolt of suitable size for fixing arrangement and connecting up with three core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make : Havells/Bajaj/CG

Supply,installation and testing Air conditioner split type 1.5 TR capacity 5 BEE rating invertor type wall mounted air cooled electric driven single phase 50 Hz AC supply.with cordless remote unit complete all as specuified. Make:- Voltas/Samsung/Bluestar

All as per item No 148.00 here-in-before but split type 1.5 TR capacity 3 star with cordless remote operated on 220 Volt AC supply complete to wall with suitable bracket for indoor outdoor unit and connected with electric supply, testing on full load completed all as specified and directed by Engineer-in-Charge. Make:- Voltas/Blue star/Godrej/ Hitachi/ Haier

All as per item No 148.00 here-in- before but Split type Air conditioner of capacity 2 ton rating 3 star with cordless remote operated on 220 Volt AC complete all as specified and directed.Make : Voltas/Blue star/Godrej/Hitachi/Hair

S&F installation and testing and commissioning of Window type Air conditioner of capacity 1.5 ton rating 3 star with cordless remote operated on 220 Volt AC supply complete to wall with suitable bracket for indoor outdoor unit and connected with electric suply, testing on full load complete all as specified and directed. Make : Voltas/Blue star/Godrej/Hitachi/Hair

M&L for servo voltage stablizer 4 KVA capacity single phase air cooled unbalance type microprocessor bassed digital disply in powder coated encloser with cooper winding ,wiring and termination and input correction range 180 Volts to 270 Volts and output voltage stablized at 230 volts +/-5% with minimum correction speed of 8 volts per secound as per IS-9815(Part I)/1994 with provision of low and high voltage cutoff relays all specified and as directed. Make Sinetrac/V Guard/Microtek

M&L for single pole & neutral sheet metal encloser with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp rating complete all as specified and as directed. Make :- Legrand/ABB/Siemens

M&L for sub main wiring with 2x 4.0 Sq mm and 1x 4.0 Sq mm for earth wire with multi standard copper conductors FRLSH, 1100 volts grade, drawn through and including PVC casing caping all accessories fixed to wall, ceiling, floors etc. including making good the disturbed surfaces complete all as specified and as directed. Make :- Havells/Finolex/Polycab/Richa

S& F Geyser, energy efficient ,5 Star rating , 25 litres capacity, white/half white, copper steel alloy container inner tank with fiber reinforced body (FRB) puff insulation for both inner tank & for hot outlet copper connection pipe with all in built in safety accessories like thermostat/automatic thermal cut out with ON /OFF /CUT out indicators all pre-wired and additional safety accessories like pressurer release valve/presure reducing valve, non return valve, including new PVC heavy duty pipe with brass ferrule fitting for HOT and COLD water connections fixed on new location as per manufacturers instruction / as oredered with suitble size nuts & bolts, making necessary connection & testing on completion , complete all as directed. (Make-HAVELLS Monza ECvor equivalent in CG/BAJAJ/USHA)

M&L for fine river washed sand in trenches complete all as specified ans as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.

M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed

S&F for 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hanger not more than 1 meter apart including 4 mm suspension wire one twine core cable flat or circular stranded conductor of size 10 sqmm.Make : Richa/Finolex/KEI

S&F for House service bracket (hook typecomplete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos90 0 bends. M.S.hook and stay or guy

Supply and fixing for Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and as directed.

Supply and fixing of Aluminium strip 25 x 3.15mm with porcelain insulators saddles and fixing screws etc. for roof conductors above ground complete all as specified and as directed. Note: (a) All the roof conductors down conductors and air termination rod shall be mounted on suitable size porcelain insulators/saddles. (b) Any portion of the lightning condcutor, air termination rod and the strip GI/Aluminium are not in contact with the building. (c) The cost of porcelain insulators/saddle with fixing accessories is deemed to be included in quoted rate. (d) Conductor shall be properly secured to the building. (e) Due case taken to avoid leakage/damage in roof of the bldg, repair/replacement cost of the leakage deemed to be included in quoted rate. (f) The lightning condcutor shall be secured at not more than 1.20 mtr apart for horizontal run and 1 mtr for vertical run.

Supply and fixing for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed. NOTE:- (i) The unit rate shall also included for earth work in hard/ dense soil, PCC (1:3:6) type C1 chamber with CI cover plate 10mm thick including angle iron frame , funnel with GI watering pipe 20mm dia Medium grade, GI protection pipe light grade 15mm dia and wire mesh complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified on Sl Page No 389 of MES SSR Part-II. (ii) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately. (iii) Test points shall be made of GI strip 32x6 mm bridge type mounted on insulators, where ever applicable

Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised iron strip 32x 6mm as earthind lead by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of required size (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. Note: Contractor should submit earth test report to GE

TOSHIKA SUMI

SHRI MADAN SINGH

M/S RAHUL TRADING CO.