REPAIR TO CERTAIN ROADS IN THE AREA OF AGE BR II UNDER GE MIS MHOW

Amount

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on black top surface complete all as specified and directed.

M&L for applying evenly a priming/ tack coat with bituminius primer @ 5.00 Kg per 10 Sqm complete all as specified and directed.

M&L for bituminous permix asphaltic semi dense concrete 40mm (consolidated average thickness) with 5.5% binder content by (paving bitumen VG-30) weight of total mix rolled and compacted with 8 to 10 tonne capacity power road roller to required camber and gradient complete all as specified and directed. Note :- (i) Premix bituminous saphlatic semi dense concrete shall be obtained from hot mix plant transported from plant to work site and spreading shall be done with mechanical paver. (ii) Contractor shall quote his rate on the basis of binder as mentioned in above item, if there is any variation in the actual binder content used, the rate shall be adjusted @ Rs. 45/ per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A' (iii) Prior the execution of work started the Design mix of bituminous permix asphaltic semi dense concrete should be provide by the contractor from any Governement Engineering College or approved NABL lab and also need an approval for the hot mix plant from GE.

M&L for bituminous permix asphaltic semi dense concrete 30mm (consolidated average thickness) with 5.5% binder content by (paving bitumen VG-30) weight of total mix rolled and compacted with 8 to 10 tonne capacity power road roller to required camber and gradient complete all as specified and directed. Note :- (i) Premix bituminous saphlatic semi dense concrete shall be obtained from hot mix plant transported from plant to work site and spreading shall be done with mechanical paver. (ii) Contractor shall quote his rate on the basis of binder as mentioned in above item, if there is any variation in the actual binder content used, the rate shall be adjusted @ Rs. 45/ per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in Sch 'A' (iii) Prior the execution of work started the Design mix of bituminous permix asphaltic semi dense concrete should be provide by the contractor from any Governement Engineering College or approved NABL lab and also need an approval for the hot mix plant from GE.

M&L 150mm thick (spread thickness) two layer of soling with broken boulders or quarried stone (granite/trap/basalt) interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8-10 tonne power roller, complete all as specified and directed.

M&L 150mm thick water bound macadam in two equal layers of 75mm each (compacted thickness) with coarse aggregate of stone (granite/basalt/trap) 63mm to 40mm size, spread rolled and consolidated to required gradient & camber with 8-10 tonne power roller, complete all as specified and directed.

M&L for Premixed sand seal coat with 0.06 cu.m. of sand mixed with 6.8 kg of bitumen, applied and rolled to a uniform smooth surface complete all as specified and directed.

Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber up to outer edges of roads on existing black top surfaces complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land complete all as specified and directed .

M&L for PCC 1:3:6 type C2 using 40mm graded agrregate 100mm thick as in Sub base/ Sub floor/ Pavings complete all as specified and directed.

M&L for 60mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M-35 grade of approved shape, size and colour conforming to IS 15658-2006 including joints filled with sand and stone dust 25mm thick as in levelling course of interlocking complete all as specified and directed.

M&L for 80mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finish) of M-40 grade of approved shape, size and colour conforming to IS 15658-2006 including joints filled with sand and stone dust 25mm thick as in levelling course of interlocking complete all as specified and directed.

M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minimum 1.5 mm thick single coat as a centre line or edge line etc, road marking of 150/100 mm width using "HOT MARK" thermo plastic paint (Hot application) white /yellow by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcuim caronate, inter filler etc, thermoplastic requirement for glass beads shall be conforming to BS-6086 of MOST specificaiton including spraying of glass beads etc complete all as per manufacture's instructions and as directed.

S&F in repair of dual reflective cat eye of impact resistant plastic stud double moulded solid state having ultra violet resistant color(white/red/yellow) with four round disc containing 28 mini retro reflective glass beads of color white/red/yellow to side provided with steel zinc plated of dia 12mm and of length 120mm for fixing to road by haammering complete all as specified and directed. Make-Cat part no GPL-02-02 of make Greenlite,Cat part no. OS-778 of make Oscar,Cat part no. DA-52 of make Dark Eye or equivalent of Suneye.

S&F in repair of spring post made out of PU material of dia 80mm and height 800mm provided with reflective sheet fixed with screws,epoxy or other adhesive material complete all as specified and directed. Make- Cat part no. DA-963 of make Dark Eye or equivalent of other make.

S&F in repair of delineator made of ABS round body fitted with 2 Nos 100mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe medium weight 50mm dia of height 600mm duly powder coated,anti rust and anti theft steel net,embeded in bed block (Size-150x150x200mm),1:2:4 type B-0(12.5mm aggregate) complete all as specified and directed. Make- Cat part no. DA-952-GP of make Dark Eye or equivalent Suneye/Oscar/3M.

Supply and fixing in repair exc 800 mm dia convex mirror for visibility and fixed with 50 mm dia SS pipe medium grade ISI mark (height of pipe not less than 1.20m from ground level) & embeded in post holes size (200mm x 200mm x 400mm) in PCC 1:3:6 type C-2 (using 40mm grade stone aggregate) & including earth work & excavation RFR complete all as specified and directed.

S&F super delux quality solar stud of Aluminium body including solar- powered by monocrystal solar panel. One high capacity Ni-Cd rechargable battery Approximate 1000 mtrs LEDs- 010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours back up- 12 hours of comtinous lightening at night complete all as specified and directed. Make - SUNEYES/ Dark Eye / 3M/Alcolite/solar ) complete all as specified & directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparation of concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of plastic emulsion paint over a coat of concrete primer complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortor 1:6., etc complete all as specified and directed.

M& L for rendering in cement mortar (1:6), 15 mm thick finished even and smooth without using extra cement complete all as specified and directed

M&L for Preparation of New surface of wall and applying two coats of Cement based paint over alkali resistance priming coat complete all as specified and directed.

Krishna Constructions (BID ID -3149029)

Arpit Heights Private Limited (BID ID -3141998)

M/s ESS KAY Construction (BID ID -3147482)

M/S Anil Enterprises (BID ID -3149007)