UPGRADATION OF TWO DS ROOM IN C DIV ARMY WING CONSTRUCTION OF CHANGE ROOM WITH TOILET FACILITIES CONVERSION OF CONVENTIONAL LIGHT FITTINGS TO LED FITTINGS AT GH BLOCK NO 29 TO 37 AND CERTAIN REVENUE WORKS AT DSSC WELLINGTON

Amount

B/R PORTION Taking down chowkhats or frames with shutter (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sqm each all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frame n.exc 1.5 Sqm each with shutters (without taking off shutters) from frame all as specified and directed by Engr-in-Charge.

M & L for UPVC door white colour all as per the following specifications, manufacturer's instruction and as directed by Engr-in-Charge. 1. The profile for costruction of UPVC Door will be of overall size 60 x 58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections. 2. The corners will be plastic welded. 3. The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm. 4. The door will be fixed to walls using 8 mm dia 80 mm dia MS screws minimium 3 Nos on each side. 5. The top portion of door shall be provided with plain glazing of 6 mm thick fixed to door shutter with UPVC standard beadings of 24.5 x 16 mm of 2 mm thick.

6. The bottom portion of door for 1 m height will be provided with UPVC hollow board not less than 6 mm thick. 7. The door shall be provided with :- (a) Moritise lock of brass size minimum 100mm four lever with two keys as per manufacturer's specification. (b) Two Nos of fan light pivot size 170mm on one shutter. (c) 03 Nos of 3D hinges on each shutter. 8. All the fittings shall be provided with self tapping screws. Note: The entire fixing shall be done as per manufacturer's instructions and specification and as directed by Engr-in-Charge. Make: Madhu Industries / AMD Overseas Ltd /Gadli Industries /Deceuninck/ Simta Astrix/ Duroplast

M & L for UPVC windows white colour sliding type all as per the following specifications, manufacturer's instruction and as directed by Engr-in-Charge. 1. UPVC Window frame shall be made of material confirming to IS 10151 the window frame shall be made of extruded UPVC section having over all dimension of 65 x 55 having wall thickness 2mm +/- 0.2mm. 2. Corners of frame shall be jointed by MS galvanized brackets mitred and plastic welded. 3. The profiles should be three chamber system which shall provide high insulation properties. 4. Glazing shall be 4mm thick plain glass fixed in frames with appropriate beading as per manufacturer's specification. 5. Suitable locking arrangement shall be provided with each window shutter. Make: Madhu Industries / AMD Overseas Ltd /Gadli Industries/ Deceuninck/ Simta Astrix/ Duroplast

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serveceable tiles to store and rubbish off the premises all as directed by Engr-in-Charge.

M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), 25 mm thick as in subbase and level course complete all as speicified and as directed.

M & L for dark shade double charge /ultracharge vitrified ceramic tiles 10 mm thick (square /rectangular) polished , area of each tiles exceeding 1.00 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as speicified and directed.

M & L 8 mm thick Pre-Engineered hard wood wall panelling with planks fixed with screws to timber frame work over and including 8mm thick plywood with beading fixed on wall and floor corners all as per manufacturers instructions and as directed by Engr-in-Charge.

M & L for plain fillets second class hardwwod, sectional area exc 6 sqcm but n.exc 13 sqcm., square, rectangular or triangular in section, clean sawn, secured with nails plugging to wall complete all as specified and as directed.

M & L for preparing surfaces of wood and wood based materials, new or old, of any description over 10cm width or girth, not otherwise described and treated with Creosote oil all as specified and directed

S & F Polyster or Polyster bleds Vertical venetian blinds having beaded chain to open and close the bleds, colours and pattern as approved by the GE.

S & F 'L' type modular curve work station, table of size 1800 x 1950 x 750mm height with 25mm thick prelaminated table top supported with prelaminated particle board all side edge banding finish & particle frame thickness of 50mm thick of (1 No - 1800mm + 1 No 1950mm) MS frame powder coated finish & 9mm thick soft board and writing board, top tile 1 No white board per person rest fabric magnetic, middle panel- fabric , bottom tile-metal, wire management- switches to be mounted on bottom metal tile with a movable padestal units with 2 drawers and one shelf and having a wall mounted cabinet of size 1200mm x 600mm x 400mm made of prelaminated board, as per the design shown in Methodex Drg No MSPL/DSSC/FL, Revision 1 dt 11 Jul 2019 all as specified as per the specification/ drawing / manufacturer's instruction and as directed by Engr-in-Charge. Make : Methodex or equivalent of Godrej / Featherlite.

M & L for complete removal of existing treatment on wall by scrapping , washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of Royal shine over one coat of primer over and including one coat wall putty complete all as specified and directed.

M & L for preparation and applying two coats of Royal shine over one coat of primer over on ceiling surface complete all as specified and directed .

Demolition of brick work/PCC block masonary work built in cement mortar including all quoins, arches, pillars etc, separating serviceable materials and removing debris off the premises all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., and removing rubbish off the premises all as specified and directed by Engr-in-Charge

M & L for precast cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.

M & L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M & L for rendering 15 mm thick in CM (1:4) mixed with water proofing compound as per manufacturer's instruction on fair face of brick /concrete surfaces and finished even and smooth without using extra cement all as specified and as directed.

M & L for preparation of surfaces and applying two coats of Royal shine interior paint over one coat of primer on wall surfaces complete all as per manufacturer's instruction and as directed by Engr-in-Charge.

M & L for complete removal of existing treatment and applying two coats of oil emulsion distemper over one coat of primer on ceiling surfaces surfaces complete all as specified and directed .

M & L for Plaster of Paris (POP) cornices in ceiling and wall corners and maching with existing cornices complete all as specified and as directed by Engr-in-Charge.

M & L for forming jambs, etc., to openings (to foregoing item) in CM (1:4) including cutting toothing and properly bonding into old work also facing, jointing and pointing to match existing work complete all as specified and as directed.

M & L for prepartion of new plastered/unplastered surfaces of walls and applying two coat of external weather coat over a coat of deco prime primer with brush /roller finished even and smooth complete all as per manufacturer's instruction and as directed by Engr-in-Charge.

M & L for complete removal of existing treatment from old plastered /unplastered surfaces of walls and applying two coats of external weather coat over a coat of deco prime primer with brush/roller finished even and smooth complete all as per manufacturer's instruction and as directed by Engr-in-Charge.

S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders framed balusters; walk ways railings ; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F for welded steel wiremesh fabric complete to wood or steel members, weight per Square metre n.exc 4 Kg complete all as spcified and directed.

Cutting holes in brick walls/stone walls/RCC wall built in cement mortar exc half brick but n.exc one brick for inserting hold fasts or similar work and making good the dismantled protion in cement concrete (1:2:4) type B-1 complete all as specified and as directed by Engr-in-Charge. Note : Depth of embedded portion of hold fasts or lugs measured from the face of the jambs into the wall.

S & F for lorry hinges mild steel of size 100 mm complete all as specified and as directed.

S & F 250 mm long mild steel, sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate, and two on staple plate and fixed complete all as specified and directed.

M & L for preparation of new steel surfaces/ untreated old steel surfaces over 10cm width or girth and and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) and removing unserviceable debris off the premises complete all as specified and as directed.

M & L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in mass concrete or bed blocks, including necessary formwork complete all as specified and directed.

M & L for preparing plastered or unplastered new surfaces of walls and applying two coats of cement base paint over a coat of cement primer ( any shade) as approved all as specified and directed by Engr-in-Charge.

S & F rotational moulded double layered polythene water storage tanks, 2000 Ltrs capacity, cylindrical, vertical with closed top, hoisted and fixed in position including 20 mm dia ball brass valves, high pressured with polyethene float and fly nut, screwed for iron pipe complete all as specified and as directed by Engr-in-Charge.

S & F 20mm bore Galvanised Iron tubing medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S & F 15mm bore Galvanised Iron tubing medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S & F 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation, or for man holes etc., n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/ dense soil all as specified and as directed.

Excavating in post holes (or similar holes) each n.exc 0.50 cum getting out hard/ dense soil all as specified and as directed.

M & L for providing cement concrete type (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete, boundary pillars and posts etc., all as specified and as directed.

M & L for RCC (Nominal mix) (1:2:4) type B-1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M & L for RCC (Nominal mix) (1:2:4) type B-1 (using 20mm graded stone aggregate) as in arch beams, cantilevers, bressummers, lintels over 1.5 m span etc., complete all as specified and as directed.

M & L for form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work for fair finished surfaces all as specified and as directed.

M & L for form work to sides and soffits of roof beam, , beam haunchings, girders, bressummers, lintels , cantilevers, shelves including supports,overhangs, etc., also splays between floors and beams etc., for flat fair finished surfaces all as specified and as directed.

Returning, filling in trenches, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick on back side of wall complete all as specified and as directed.

Removing excavated soil to a distance n.exc 50mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified and as directed.

M & L for TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

All as per Item No 50 above but 5 mm dia and over upto and including 10 mm dia as in stirrups complete all as specified and as directed.

M & L for cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in coping, cills, bands, bed blocks, haunching, emberging holdfast etc., including necessary form work complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

S & F powder coated coloured aluminum sections as in door /windows/ partitions etc., with one or more rebates using suitable size of standard aluminium sections including door stopper, including necessary joining cleats, glazing clips, rubber neoprene packing, aluminum snap beading screws complete all as specified and directed.

M & L for prelaminated particle board 12 mm thick exterior grade prelaminated on both side with decorative choice laminations fixed with screws to timber frame work or to aluminium frames as in doors and partitions complete all as specified and directed.

S & F 4mm thick sheet glass, pin head type fixed with rubber beading in squares n.exc 0.5 Sqm in each pane in aluminium door, windows etc., complete all as specified and as directed.

S & F 5mm thick sheet glass, pin head type and fixed with ruber beaing in squares exc 0.5 Sqm in each pane in aluminium door, windows etc., complete all as specified and as directed.

S & F die cast hydraullic door closer of aluminium body complete all as specified and directed. Make Godrej / Hyper/ Dyna/ Everite / Sandhu/ Priya / Amar Engg Co.

S & F for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders framed balusters; walk ways, railings ; framework of water tanks and similar work confroming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F Solid PVC door frame of size 50 x 47mm made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube complete all as specified and directed.

S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2 mm thick plain colour PVC sheet on back face in the frame at site as per specification & drawing including all necessary fittings like hinges; tower bolt; handle etc complete all as specified and as directed.

M & L for two coats of oil emulsion distemper over one coat of primer on plastered surfaces of walls including preparation of new surfaces with one coat of putty complete all as specified and directed.

Dismantling mild steel work of any description not otherwise provided for complete all as specified and directed.

Labour only for erection and fixing only joist, channel, angle, or tee sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed. Note : Serviceable steel obtained from Item No 63 above shall be reused.

S & F for steel work as in tubular trusses, rafters, purlins members including special shaped washer etc., complete using ERW or induction butt welded tubes grade St.-240 complete all as specified and directed.

S & F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment, holdfasts complete all as specifed and directed.

Dismantling plain or corrugated translucent sheeting any gauge, thickness, in roof covering complete all as specified and as directed.

M & L for pre-painted galvalume aluminium zinc cooating GI based steel sheet 0.5 mm thick of any colour having tensile strength of 550 MPa as in roof covering, ridges fixed with self tapping screws all as specified and directed.

M & L for hard core of broken stone or boulders n.exc 63 mm size deposited, spread and levelled in layers n.exc 15cm thick,watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M & L for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base floor finished even and rough to receive the top layer all as specified and directed.

M & L for vitrified ceramic joint less tiles 8 to 10 mm thick light shade (square/rectangular) area of each tile exc 0.36 Sqm but n.exc 0.42 Sqm in floor etc., set and jointed in neat cement slurry and pointing in white or coloured cement to match the colour of tiles, laid over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.

All as per item No. 71 above but on vertical surfaces laid over and including 10 mm thick rendering/ backing coat in CM (1 :3) complete all as specified and directed.

M & L for modular false ceiling systems in Mineral Fibre Sierra having micro look teglar edges of 13mm thick of size 595mm x 595mm GRG ceiling tiles shall have a humidity resistence of RH 99 with NRC level of 0.70 and light reflactance up to 85 % and fixed with suspension system (Grid), the size of the same is 15mm x 32mm, the galvanised iron sheet of 0.30mm thick used in the manufacturing of gird is zinc coated for preventing corrosiion. The main runners are hung from the soffit with the help of GI wire hanger complete with installation all as per manufacturers instruction and as directed by Engr-in-Charge. Make: Armstrong/Diamond/Saint Gobain.

M & L for 75mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggrregate) as in plinth protection and footpaths, finished even and smooth without using extra cement to be placed in alternative bays complete all as specified and directed.

Demolition and breaking up of drain pipes 300 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M & L for reinforced concrete pipes 300 mm dia, class NP2, laid and jointed complete with collars complete all as specified and directed.

M & L for concrete bed (1:3:6) type C-2 (using 40 mm graded stone aggregate) to 300 mm dia drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed by Engr-in-Charge.

M & L for Precast RCC cover slab cement concrete, (1:2:4), type B-1, (using 20mm graded stone aggregate) as in slabs with plain fair faces including setting in CM (1:4) all as specified and as directed. (Note : Reinforcement shall be measured and paid separately)

M & L for moorum/red bajiri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for plain cement concrete 75mm thick (1:3:6) type C-2, (using 20mm graded stone aggregate) as in subbase complete all as specified and directed.

S & F factory made machine pressed chequered cement concrete colour tiles of size 300mm x 300mm x 22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors , laid over and including 20 mm thick screed bed in CM (1 :4) complete all as specified and as directed.

Excavating over areas, n.exc 1.5 m deep and getting out in hard/dense soil complete all as specified and as directed.

M & L for walling of random rubble uncoursed well bonded bedded and solidly hearted built in CM (1:6) including necessary bond stones and pointing the unaccesible dressed surface with same mortar as the work proceeds complete all as specified and as directed.

Labour for extra over stone walling for hammer dressing to faces stones and dressing of face of beds and joints as specified of random rubble walling un coursed or brought up to course with maximum depression on face straight edge held against the dressing surface not exc 40mm all as specified and directed by Engr-in-Charge.

M & L for keyed pointing to random or polygonal rubble uncoursed or brought upto courses in CM (1:4) complete all as specified and as directed.

M & L for Antitermite treatment of voids in masonry using chemical emulsion one litre per hole at 300mm intervals including drilling holes at 45 degree and re-plugging them with cement mortar 1:2 ( 1 cement : 2 coarse sand) to match the existing floors complete all as specified and as directed.

E/M PORTION Taking down carefully existing unserviceable conduit /concealed conduit point wiring (light /exhaust fan /socket/ power point) complete including switches, ceiling roses, shades, brackets, sockets, holders, light fittings, call bells, fluorescent tube light fitting etc & removing the unserviceable retrieved materials from site making good the disturbed surfaces of walls/floors/ ceilings etc., complete all as specified and as directed by Engr-in-Charge.

Taking out unserviceable PVC insulated/sheathed sub main wiring with 2 single core aluminium conductor cable of size upto 10 Sqmm on wooden batten /PVC conduits, complete with battens /conduits and remove from site and making good disturbed surfaces of wall complete all as specified and as directed.

Disconnecting /dismantling of old existing unserviceable DB's any way 240 /415 Volts with their old /unserviceable burnt MCB's complete all as specified and as directed.

M & L for concealed point wiring with 1.5 Sq mm, FRLS PVC insulated, single core, copper conductor cable, 1100 Volt grade, multi stranded in and including concealed rigid non metalic PVC conduit medium grade for one light /exhaust fan point controlled by one switch with and including continuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor green in colour connected to common earth and earth dolly all as specified and as directed. Note : (i) Existing Sunk pressed steel terminal boxes shall be replaced with modular metal flush boxes and shall be paid separately. (ii) Cost of stone cutting & making good the distrubed surfaces is deemed to be included in the unit quoted rates. (iii) Modular boxes shall be measured and paid separately.

(b)One 5A socket outlet independent controlled by one switch. Note :- Modular Metal Flush boxes shall be measured & paid separately under relevant items.

All as per Item No 90 above in PVC conduit but with 1.5 Sqmm cable for one socket outlet 3 pin 5 Amps on the same board with other switches all as specified and as directed.

All as per Item No 90 above in PVC conduit but with 1.5 Sqmm cable for one socket outlet 3 pin 5 Amps on the independent board with other switches all as specified and as directed.

All as per Item No 90 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified and as directed.

M & L for concealed sub main wiring with two single core, multi stranded, FRLS PVC insulated, 1100 Volts grade, cable with copper conductor of size 6 Sq mm in and including concealed rigid PVC conduit medium grade including continuous PVC insulated copper conductor single core earth continuity conductor green in colour of size 6 Sqmm connected to common earth complete all as specified and as directed. Note (i) 03 runs of copper conductor & 01 run of PVC rigid conduit (Medium grade) shall be considered as one run. (ii) Cost of stone cutting & making good the distrubed surfaces & matching to existing one is deemed to be included in the unit quoted rates.

S & F Modular type switch single pole 6 Amps one way 1 Module complete all as specified and as directed. Make : Verona of Crabtree, Cat No: ACVSXXW061 or equivalent in Legrand/C&S.

S & F Modular type socket out let 6 Amps 2/3 pin combined 2 module complete all as specified and directed. Make : Verona of Crabtree, Cat No: ACVKSWW065 or equivalent in Legrand/C&S.

S & F Modular type socket out let 2 in 1, 6/16 Amps all as specified and as directed. Make : Verona of Crabtree, Cat No: ACVKCWW163 or equivalent in Legrand/C&S.

S & F Modular type switch single pole 16 Amps one way 1 Module all as specified and as directed. Make : Verona of Crabtree, Cat No: ACVSXXW161 or equivalent in Legrand/C&S.

S & F concealing modular metal flush box suitable for switches/sockets of following modules all as directed. (a) 1/2 Module Make : Verona of Crabtree, Cat No: ACTXMIIX01 or equivalent in Legrand/ C & S.

(b) 3 Module Make : Verona of Crabtree, Cat No: ACTXMIIX03 or equivalent in Legrand/ C & S.

(c) 6 Module Make : Verona of Crabtree, Cat No: ACTXMIIX06 or equivalent in Legrand/ C & S.

S & F modular cover plate suitable for fixing switches/sockets of following modules all as directed. (a) 2 Module Make : Verona of Crabtree, Cat No : ACVPPCWV02 or equivalent in Legrand/ C & S.

(b) 3 Module Make : Verona of Crabtree, Cat No : ACVPPCWV03 or equivalent in Legrand/ C & S.

(c) 6 Module Make : Verona of Crabtree, Cat No : ACVPPCWV06 or equivalent in Legrand/ C & S. Note for Item Nos 100 to 105 - The make of modular metal flush boxes & cover plates shall be same as that of the switch & Sockets.

S & F in repairs ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite 63.5 x 25mm, three terminal complete all as specified and directed. Make: Havells/CG/Anchor

S & F ultra slim elegance LED lighting fixture with extruded AL heat sink, 20 watts, 4ft energy efficient and environmental friendly complete all as specified and directed by the Engr-in-charge. Make : Havells, Cat No : ENDURALINEARNEO BS20WLED865SPCWH or equivalent in Luker /Philips.

S & F MCB, DB, SPN, 8 ways double door, IP-43, IK-09 with metal door, rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall/other surface complete all as specified and as directed. Make : Havells, Cat No- DHDNSHODAW08 or equivalent in ABB/Legrand.

S & F MCB, SP, 10 KA, 230V, "C" curve, 06-32 A, ISI Marked complete all as specified and as directed. Make: Havells, Cat No: DHMGCSPF006-032 or equivalent in ABB/Legrand.

S & F MCB, SPN, 10KA, 240V, "C" curve, 06-32 A, ISI marked complete all as specified and as directed. Make: Havells, Cat No: DHMGCSNF006-032 or equivalent in ABB /Legrand

M & L for earthing complete with galvanized steel plate electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI earth wire 4 mm dia by means of bolts,nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 15mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth PCC pit & cover with suitable handle, funnel, wire, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories all as directed by Engr-in-Charge. Note: If the desired earth resistance is not obtained, the earth will be redone at no extra cost for the full satisfaction of Engr-in-Charge.

S & F telephone socket RJ-11 with shutter 1 module complete all as specified and as directed. Make :Legrand, Cat No: 5736 26 or equivalent in Havells/C&S.

S & F TV coaxial socket, 1 module complete all as specified and as directed. Make :Legrand, Cat No:5736 25 or equivalent in Havells/C&S.

S & F internet socket RJ-45, UTP 8 contacts, sheilded, folded metal 1 module complete all as specified and as directed. Make :Legrand,Cat No:5736 28 or equivalent in Havells/C&S.

Supply and laying 5 Pair, PVC insulated telephone cable in and including suitable PVC conduit /casing caping and fittings all as specified and as directed. Make: Havells, Cat No:WHTTATEA5P50 or equivalent in Finolex/Polycab

S & F rigid non-metallic PVC conduit of 20mm dia, including all tees, bends, elbows, junctions, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., all as specified and as directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings etc., removing materials to store or for taking credit complete all as specified and as directed.

S & F IP >= 20, Class I, CRI>=80, wall mounted 2 feet LED batten with integrated electronic driver & polycarbonate diffuser complete with all accessories, prewired, including 9 W or min 800 lumens , 6500 K, LED 2 feet tube light and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and directed by Engr-in-Charge. Make: Havells, Cat No: LUMILINEBS9WLED 865SPCWH or equivalent in Philips/Luker

S & F IP >= 20, Class I, CRI>=80, wall mounted 4 feet LED batten with integrated electronic driver & polycarbonate difuser complete with all accessories, prewired, including 20 W or min 1800 lumens ,6500 K, LED 4 feet tube light and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and directed by Engr-in-Charge. Make: Havells, Cat No:LUMILINEBS20WLED 865SPCWH or equivalent in Philips/Luker

S & F decorative wall mounting fixture with opal PC diffuser suitable for lamps with B 22 base with all accessories internally prewired and including connecting up with and including twin /three core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed by Engr-in-Charge. Make: Havells, Cat No: LHDL07150099 (Beetle) or equivalent in Philips/Luker

S & F decorative wall mounting SS finish fixture with textured glass diffuser suitable for lamps with E27 base with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed by Engr-in-Charge. Make: Havells, Cat No: LHJE04104499 (Ebony) or equivalent in Philips/Luker

S & F IP >= 65,IK>=07, Class I, CRI>=80 environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W or min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed by Engr-in-Charge. Make : Havells, Cat No: RUGBYNEONFT10WLED 860SSYMTOPC or equivalent in Luker/ Philips.

S & F IP >= 20, Class I, CRI>=80 surface mounted LED square fitting of size 1 x 1 feet for glare free light of 15 W, 6000 K with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed by Engr-in-Charge. Make : Havells, Cat No:PLUTOSURFA CE1X1PLS15WLED840S or equivalent in Philips/Luker

S & F IP >= 65, IK>=07, Class I energy saving and environment friendly long life high power LED as source of building security light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25 x 3mm flat iron 2 Nos including nut and bolts for fixing the bracket and making connections in flexible conduit all as specified and as directed. Make: Havells, Cat No: ENDURAPEARLSL25W LED757SASYTOPC (Endura Pearl) or equivalent in Philips/Luker

S & F LED lamps of 10W or min 950 lumens with base cap B22 type of 6500K complete all as specified and as directed. Make : Havells, Cat No : LHLDERUEML8X010 or equivalent in Philips/Luker

S & F LED lamps of 10W or min 950 lumens with base cap E27 type of 6500K complete all as specified and as directed. Make : Havells, Cat No: LHLDERUEML8X010 or equivalent in Philips/Luker

S & F in repairs 4 Way, IP43, IK-09 metal double door,TP & N vertical DB fitted with busbar and blanking plates, neutral link with 4 pole MCCB as incomer and SP/TP MCBs as outgoings, blanking plates ,without MCCB and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge. Make: L&T, Cat No: DBVTL004DD or equivalent in Legrand/ABB. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates. (ii) The cost of making suitable cut to DB to suit the existing SP/TP MCBs and MCCB is deemed to be included in the unit quoted rates.

M & L for earthing complete with galvanised steel plate electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI earth strip of size 32 x 6mm by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 40 mm bore medium grade GI protection pipe (upto 7.5mtr long) & watering pipe of 20mm bore medium grade GI pipe for earth including chamber pit with cover with handle, funnel, common salt, charcoal filling, including necessary excavation, earth work & taking down old earthing items in any type of soil complete all as specified and directed by Engr-in-Charge. Note: If the desired earth resistance is not obtained, the earth will be redone at no extra cost for the full satisfaction of Engr-in-Charge.

M & L for sub main wiring with two single core, multi stranded, FRLS PVC insulated, 1100 Volt grade, cable with copper conductor of size 4 Sq mm in and including PVC casing caping medium grade including continuous FRLS PVC insulated copper conductor single core earth continuity conductor of size 4 Sqmm connected to common earth all as specified and directed by Engr-in-Charge. Make: Havells/Polycab/KEI Note: (i) 3 runs of 4 Sqmm single core wire and one run of PVC casing capping medium grade shall be measured as one unit length. (ii) The wiring shall be done in proper color coding using red for phase, black for neutral and green for earth. (iii) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for point wiring with 1.5 Sq mm, FRLS PVC insulated, single core, copper conductor cable, 1100 Volt grade, multi stranded in and including PVC Casing and caping for one light/exhaust fan/socket outlet 5 Amps independent/call bell point controlled by one switch with and including continuous 1.5 Sqmm FRLS PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly all as directed by Engr-in- Charge. Make: Havells/Polycab/KEI Note: (i) 3 runs of 1.5 Sqmm single core wire and one run of PVC casing capping medium grade shall be measured as one unit length. (ii) The wiring shall be done in proper color coding using red for phase, black for neutral and green for earth. (iii) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S & F modular switch, single pole, one way 10A, 230 V AC, 50Hz. one module all as specified and directed. Make: Verona of Crabtree, Cat No: ACVSXXW101 or equivalent in Legrand/ C & S

S & F Modular white cover plate with frame suitable for two module all as specified and directed. Make: Verona of Crabtree, Cat No: ACVPPC WV02 or equivalent in Legrand/ C & S

S & F surface mount modular plastic flush box 2 module all as specified and directed. Make: Verona of Crabtree, Cat No: ACTXPIWX02 or equivalent in Legrand / C & S Note:(i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates. Note for Item Nos 132 & 133:- The make of both cover plate and flush box should be same as that of switches/ sockets.

S & F in repairs MCCB, 4 pole,100A rating (Ics=100% of Icu), 415 Volts, 30 KA breaking capacity with adjustable thermal and fixed magnetic setting complete all as specified and directed by the Engr-in-Charge. Make: L&T, Cat No: CM97933OOK2 or equivalent in Legrand/Siemens. Note: The cost of making cut to the DB if any to suit the MCCB is deemed to be included in the unit quoted rates.

S & F wall mounting decorative fixture SS finish with opal glass diffuser suitable for 5W LED lamps of E14 Cap complete all as specified and as directed. Make : Havells, Cat No : LHJE04104499 or equivalent in Philips/Luker.

S & F LED lamps of 5W, WW, candle type with E-14 base cap complete all as specified and directed by the Engr-in Charge. Make : Havells, Cat No: LHLDEROEMD9X005 or equivalent in Philips/Luker.

S & F MCB, DB, SPN, 6 ways, double door type, IP-43, IK-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required & fixed flush to wall /other surface complete all as specified and as directed. Make : Havells, Cat No : DHDNSHODAW06 or equivalent in L&T/Legrand.

Supply and spreading clean M sand in trenches for cushioning /cable protection all as specified and directed. Note : Punned thickness shall be measured.

Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand cushion complete all as specified and directed.

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc., LT UG cable armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 10 Sqmm 4 core, all as specified and directed by the Engr-in-Charge. Make: Havells/ Finolex/Polycab

P K ENTERPRISES

GMS Builders

S.RAMACHANDRAN