NIT NO-11 ITEM NO-16

Supply of Mono Block/Open well submersible Pump set working on 415 V 3 Ph 50 Hz AC Supply of Motor rating 10 HP, and delivery size 80 mm, having the discharge 970-1150 LPM, head 12-15 Mtr, Make:- BS/SU/KBL/KSB/Mody/DJB Approved Make

Supply of Automatic LT Panel Board suitable for 415 Volts, 3 Phase, 50 HZ, 4 wire system for operation of up to 15 HP submersible set, made out of not less than 2 mm thick CRCA for load bearing members and 1.6 mm for doors of panel, Totally enclosed, dust and vermin proof, floor mounted type. The panel size 760 mmX 1360 mm X300 mm and having (1) 63 amp change over- 1 No (2) 63 A TPN MCCB -1 No (3) Amp meter 0-50 A- 1 No (4) Voltmeter-1 No (5) Amp & volt meter selector switches-1 set (6) Auto-manual + Light + control MCB TP 32 Amp- 1No (7) CT -3Nos (8) Push button + ON/OFF light 2 Nos each (9) 5 KVAR Shunt capacitor- 1 No (10) Aluminium Bus bar size 25 mm X 6 mm - 1set (11) 15 HP Star Delta starter (a) 32 Amp Power contactor-3 Nos (b) overload relay 14-23 A -1 No (C) Star delta timer- 1 No ( d) QT Timer -24 Hours -1 No (e) Motor Protection relay 200 , Short circuit, earth fault, Phase loss, unbalance, phase reversal, locked rotor protection-1 No. Make:- L&T/DJB Approved Make

Supply Of P.V.C insulated sheathed copper conductor cable for submersible pump motor of size 6 mm2 x 3core with voltage grade upto 1100V ( 01 Roll-100 Mtr) Make:- Gloster/Grandlay/Havells / Djb Approved Make.

Supply of G.I Pipe 80 mm dia, Medium Class, each of 3 Meter Long duly threaded on both ends welded & fitted with GI/MS Flanges of minimum thickness 6 mm on both ends with a slot for submersible cable, welding of M S Strips at both ends on flanges. Make:- Jindal/Tata/Djb Approved make

Supply of Tail piece of Medium Class G I Pipe 500 mm Long with one end threaded, as per outlet of Pump and another end flanged, as per size of G I Pipe 80 mm dia Make:-Jindal/Tata/Djb Approved make

S/O M.S. clamp 12mm thick complete with nut and bolts and washers for holding the 80 mm dia pipe including bending and shaping etc. as required.

S/o GI bend with both ends having welding flange of size 80 mm dia. Make of Flange –ISI , Make of Pipe : Jindal /Surya/Tata/ DJB Approved

S/o Rubber insertion / Jointing sheet for 50mm dia flange Make : Jyoti/National/ DJB Approved Make.

S/o Required off Size full threaded nut-bolts of good quality .

Installation of submersible Pump set with pipe and other accessories, connection of cable, installation of electric panel digging and fixing the same with the help of CC and laying of GI Pipe executing of minor civil work making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. Testing and commissioning of all E & M Equipment’s on No Load and full load conditions as per standard and full satisfaction of engineer in charge This is turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid