Creation of 63 KVA Substation along with HT/LT Network at Baghdaji Malroo near Makbara Lane 5 under the jurisdiction of ESD Zainakote, ED 3rd (Partial Turnkey Basis)

Amount

Creation of 63 KVA Substation along with HT/LT Network at Baghdaji Mularoo near Makbara Lane 5 under the jurisdiction of ESD Zainakote, ED 3rd (Partial Turnkey Basis)

Installation, Testing & Commissioning including transportation, loading and unloading from store to site of 63 KVA,11/0.433,3 phase Distribution Transformers with Bimetallic Terminal Connectors Energy efficient Level-2, (Al. wound) ONAN, Filled with T.Oil as per IS 1180 Part-I of 2014 (including SL Clamps, Jumpers including integration with system). (As per the Specification) (DT to be provided Departmentally)

Supply, installation, testing and commissioning including transportation, loading and unloading of Gapless Surge Arrestor, 9 kV, 10 kA, Lighting Arrestor Set Heavy duty with Polymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V)

Supply, installation, testing and commissioning including transportation, loading and unloading of 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V)

Supply, installation, testing and commissioning including transportation, loading and unloading of 11 KV Horn, Gap (fuse 3-phase 200A) as per Relevant IS.

Supply, installation, testing and commissioning including transportation, loading and unloading of 185 mm² Single Core Cable,1.1kV Grade, Armoured, XLPE Insulated Stranded Conductor FRLS type) including aluminum lugs/clamps.

Supply, Installation, Testing & Commissioning including digging/excavation up 1.5 meter deep for planting of S.T. poles 9.0 Meter long swaged Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300 mm above the planting depth which should be 1.5ms (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, fabrication and fixing including Transportation, loading Unloading of of G.I Channel Iron / Angle Iron /Flat/F-tops of sizes including clamps/Collars 50 x 6 mm

Supply and fixing of GI Nuts and Bolts full thread of sizes Galvanized as per IS

Supply, Installation, Testing & Commissioning of Earthing of Substation-Excavation of earth pit of dia 650mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as per IS 1239. GI strip for neutral earthing of size 75mm*10mm & 50mm*6mm for connection of transformer body, G.O Set & lightening Arrestor (Including Baby Insulators, if required) as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials & earth chamber made of brick masonry with RCC slab cover.

Supply, Installation, Testing and Commissioning of including Transportation, loading Unloading of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply, fabrication and Fixing of Danger Plate With Clamps as per Standards wih writing in English & Urdu.

Supply, Installation/fixing including Transportation, loading Unloading of Anti-Climbing Device with Clamps

Supply and Painting of poles with one coat of Red oxide Primer and two coats of Aluminium Paint

Supply and fixing of PG Clamps/wedge Connector

Providing of material & Laying of Cement bottoming 1:2:4 mix as per REC standards 0.5 cum/pole

Supply, Laying, stringing/Installation, testing and commissioning of 30 sqmm ACSR Conductor as per IS.

Supply and fixing of LT fuse Set

M/S ROYAL ELECTRICAL MECHANICAL and SUPPLIERS