SPECIAL REPAIRS TO OFFICERS MD ACCN FARM 19 AND 20 UNDER GE WELLINGTON.

Amount

Taking down existing water proofing treatment of any description including bedding layer over roof slabs and roughening of surface complete all as specified and directed.

Demolition of cement concrete of any description and in any position including padding concrete complete all as specified and directed.

M&L for providing 50mm avarage thickness PCC 1:2:4 type B0 using 12.5mm graded stone aggregates finshed even and smooth without using extra cement in levelling/ padding course on roof slab, projections and similar surfaces existing with slope complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 mixed with water proofing compound as per manufactures Instructions finished even and fair on roof slab/fair faces of brick work or concrete surfaces complete all as specified and directed. Note : Water Proofing Compound will be measured and paid separately

Supply only liquid water proofing compound complete all as specified and directed.

M&L for APP modified prefabricated polymeric membrane 4 mm thick and weighing not less than 4.5 kg/sqm reinforced with non woven polyster matt, black finished weighing not less than 100 gm /sqm having softning point not less than 140 degree celsius longitudinal tensile strength not less than 300N/Sqcm, side lap and end lap 10 cm with torch application of membrane, over compatible primer @0.40 Ltr/Sqm and finishing with aluminium paint applied @ 0.10 Kg/Sqm complete all as specified and directed.

Demolition OF RCC of any description and in any position complete all as specified and as directed. Note:- Cutting the parapets of roof with RCC cutter only complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.

Dismantling, floor hearth or wall tiling including cement mortar bedding, removing serviciable tiles to store and rubbish off the premises complete all as specified and as directed

Demolition of PCC in ground floors & pavings not exceeding 15 cm thickness (below or above ground level) (unreinforced) and all as directed .

M&L for vitrified ceramic tiles of dark shade, 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:4 as in floors etc complete all as specified and directed.

M&L for vitrified ceramic tiles dark shade 10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plaster in CM 1:4 as in vertical surfaces like skirting/ dadoo etc. complete all as specified and directed.

M&L for coloured non skid ceramic tiles, 7 to 8 mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:4 as in floors etc., complete all as specified and directed

M&L coloured glazed ceramic tiles, 300x600mmx7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including10mm thick plaster in CM 1:4 as in vertical surfaces like skirting/ dadoo etc complete all as specified and directed

M&L for providing 25 mm thick cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in flooring, padding etc complete all as specified and directed.

M&L 20mm thick Granite work (table rubbed and polished) laid, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed in CM 1:4 as in steps, jambs, pillars, window cills, cooking platforms and like complete all as specified and as directed.

M&L for 20mm thick granite machine cut, laid and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10mm thick rendering in CM 1:4 as in skirting/dado on stone/brick masonry surfaces complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for Brickwork in CM 1:6, with subclass `B' bricks, straight or curved on plan exceeding 6m mean radius, complete all as specified and as directed.

M&L for Brickwork in CM 1:4, with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls complete all as specified and as directed.

S&F in repair bib tap, 2in1 type, brass, chroumium plated, fancy type fixed with existing pipe 15mm bore, complete all as specified and directed. Make:- Cat No: KUP- 35041PM of Jaquar or techno-commercially Equivalent.

S&F in repairs single lever wall mixer 3 in one, brass, chroumium plated, system with provision for both hand shower and over head shower with 115 mm long bend pipe, connection legs & wall flange complete all as specified and directed. Make: CAT No. KUP - 35125PM of Jaquar or techno-commercially Equivalent.

S&F in repairs single lever basin mixer, brass, chroumium plated, without pop up waste system and 450 mm long braided hoses complete all as specified and as directed. Make :- Cat No. KUP - 35011BPM of Jaquar or techno-commercially Equivalent.

S&F in repairs sink cock with regular swinging spout ( Wall Mounted Model) with wall flange, brass, chroumium plated, fancy type complete all as specified and as directed. MAKE:CAT No. ARI - 39347 of JAQUAR or techno-commercially Equivalent.

S&F sheet glass shelf assembly corner consisting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and as directed. Make:Cat No.ACN-1173 of JAQUAR or techno-commercially Equivalent.

S&F in repiars soap dish brass, chroumium plated, complete all as specified and as directed. Make:Cat No.ACN-1131N of JAQUAR or techno-commercially Equivalent.

S&F in repairs soap dispenser, brass, chroumium plated, with mettalic bottle complete all as specified and as directed. Make:Cat No.ACN-1137N of JAQUAR or techno-commercially Equivalent.

S&F in repairs towel rack, brass, chroumium plated, 600 mm long with lower hangers as in bathrooms complete all as specified and as directed. Make:Cat No.AKP- 35781P of JAQUAR or techno-commercially Equivalent.

S&F in repairs toilet paper roll holder with flap, brass, chroumium plated, complete all as specified and as directed. Make: Cat No.AKP - 35753 of JAQUAR or techno-commercially Equivalent.

S&F in repairs single towel rail 600 mm long complete all as specified and as directed. Make: Cat No.AKP - 35711P of JAQUAR or techno-commercially Equivalent.

S&F in repairs towel ring square/rectangular with round flange, brass, chroumium plated, complete all as specified and as directed. Make: Cat No.ACN-1121N or ACN-1121BN of JAQUAR or techno-commercially Equivalent.

S&F in repairs shower basket small, brass, chroumium plated, complete all as specified and as directed. Make: Cat No.ACN-1177 N of JAQUAR or techno-commercially Equivalent.

S&F in repairs corner shower basket, brass, chroumium plated, complete all as specified and as directed. Make: Cat No.ACN-1175 N of JAQUAR or techno-commercially Equivalent.

S&F in repairs hand shower (health faucet) with 8mm dia, 1 m long flexible tube and wall hook with back flow preventer, brass, chroumium plated all as specified and as directed MAKE:Cat No.ALD-577 of JAQUAR or techno-commercially Equivalent.

S&F in repairs over head shower rose 200 mm X 200 mm square shape, single flow (Body and Face Plate Stainless Steel with chrome finish) with rubbit cleaning system complete all as specified and as directed. Make: Cat No.OHS-CHR - 1619 of JAQUAR or techno-commercially Equivalent.

S&F in repairs shower arm, square shape, brass, chroumium plated, 600 mm long complete all as specified and as directed. Make: Jaquar or techno-commercially Equivalent.

S&F in repairs hand shower, brass, chroumium plated, 140 mm dia, round shape, single flow with air effects with rubit cleaning system complete all as specified and as directed. Make: Cat No.HSH- 1727 of JAQUAR or techno-commercially Equivalent.

S&F in repairs hand shower flexible tubes 12 mm dia & 1.5 meter long, brass, chroumium plated, with nuts complete all as specified and as directed. Make: Cat No.SHA-549D12 of JAQUAR or techno-commercially Equivalent.

S&F in repairs premium wall bracket for hand shower, 35 mm dia and 100 mm long round shape brass, chroumium plated complete all as specified and as directed. Make: Cat No.SHA-555 of JAQUAR or techno-commercially Equivalent.

S&F in repairs floor mounted coupled water closet of size 380x660x 765 mm with flushing cistern, with UV soft close seat cover, hinges, fixing Accessories set including S trap complete all as specified and as directed. Make: Cat No.LYS-WHT-38751S & LYS -WHT-38201 of Jaquar or techno-commercially Equivalent.

S&F in repairs table top basin of size 485x395x150 mm including waste coupling and waste pipe complete all as specified and as directed. Make: Cat No.JDS-WHT-25909 of JAQUAR or techno-commercially Equivalent.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repairs PVC Gratings, 125mm dia, with/ without waste hole, complete all as specified and as directed.

S&F in repairs 15mm dia long body bib tap, brass, chormium plated, fancy type complete all as specified and as directed. Make :- Cat No. CON-107KN of Jaquar or techno-commercially equivalent.

S&F in repairs angular stop cock with wall flange, brass, chromium plated, fancy type, for 15mm dia of complete all as specified and as directed. Make : Cat No. KUP - 35053PM of Jaquar or techno-commercially Equivalent.

S&F in repair double coat hook, brass, chromium plated complete all as specified and as directed. Make:Cat No.1161N of Jaquar or techno-commercially Equivalent.

S&F in repairs of stainless steel sink, made out of 1 mm thick sink, single bowl with mini bowl & overflow drain board (L) type of over all size 1143X510X203 mm and bowl size (510X405 mm) +(178X304 mm) including waste coupling, waste pipes and bedding in cement mortar on to dwarf wall or fixing cantilever brackets and connecting union to pipe complete all as specified and as directed. Make.Model No.1142D of prayag or techno-commercially Equivalent.

S&F stainless steel plate track of size 0.9 X 1.2m complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and as directed.

Supply, laying and testing steel water tubing of size 15mm bore, medium grade galvanized with all fittings including short lengths, fixed to stone/brick walls, concealed in wall and ceiling or laid in floor complete with all fitttings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified

Supply, laying and testing steel water tubing of size 20mm bore, medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fitttings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:4 on fair faces of brick/concrete/RR Masonry surfaces, finished even and smooth without using extra cement complete as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling, finished even and smooth without using extra cement complete as specified and directed

M&L for preparation of new wall surfaces and applying two coats of oil bound distemper over one coat of primer over a coat of putty ( In two layers ) including sanding and preparation as per manufacturers instructions and as directed by Engineer in Charge

M&L for preparing plastered or unplastered new wall surfaces and applying three coats of white wash complete all as specified and directed by Engr - in- charge.

M&L for preparation of new ceiling surfaces and applying two coats of oil bound distemper over one coat of primer over a coat of putty ( In two layers ) including sanding and preparation as per manufacturers instructions and as directed by Engineer in Charge

M&L for preparing plastered or unplastered new ceiling surfaces and applying three coats of white wash complete all as specified and directed by Engr - in- charge.

M&L for complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper washable over a coat of primer over two coats of Birala white wall care putty including sanding and preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment of ceiling surfaces and applying two coats of oil bound distemper washable over a coat of primer over two coats of Birala white wall care putty including sanding and preparation of surfaces complete all as specified and directed.

M&L for preparaton of old decorated plastered or unplastered surface of ceiling by brooming down or by steel wire brushes, scrapping down smoke spots, moulds, moss and efflorecent salts, trading oil , greasy spots etc. and applying two coat of white wash on ceiling complete all as specified and directed.

M&L for preparaton of old decorated plastered or unplastered surface of walls by brooming down or by steel wire brushes, scrapping down smoke spots, moulds, moss and efflorecent salts, trading oil , greasy spots etc. and applying two coat of white wash on walls , complete all as specified.

Taking down door/window/ventilator chowkats or frames of area not exceeding 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down door/window/ventilator wooden door chowkats or frame of area exceeding 1.5 sqm but not exceeding 4.00 Sqm each with shutter (without taking off shutters from the frame), complete all as specified and as directed.

Taking down shutters of area exceeding 1 sqm but not exceeding 2 sqm complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixed in opening complete all as specified and as directed.

S&F 35 mm thick factory made solid core, single leaf PVC moulded door shutters 28 to 30 mm thick (stiles), but 2 mm thick 3 D wood grains moulded PVC sheet polyurethene painted on front face and 2 mm prelam PVC sheet on back face with 2, 4 or 6 raised panel design, fixed in frame at site as per specification & drawing complete all as specified and as directed.

M&L for first class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue, pinned at joints supplied and fixed complete, all as specified and as directed.

S&F 35 mm thick first class hard wood plain, skeleton shutters open rebated to recieve glass, wire etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, gauze etc complete all as specified and as directed complete all as specified and as directed.

S&F 35 mm thick flush shutter, solid core construction, with particle board core and covered with decorative face veneer with lipping/ frame on faces on both sides complete all as specified and as directed.

S&F mild steel work as in hold fast etc confirming to FE-290 Gde E 165 complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C1 using 20 mm graded stone aggregate as in bed blocks for hold fast including use and waste of form work all as specified and as directed.

S&F 125 mm size butt hinges brass, extruded B11 complete all as specified and as directed.

S&F 100 mm brass barrel tower bolts complete all as specified and as directed.

S&F 200mm size brass barrel tower bolts extruded section complete all as specified and as directed.

S&F 150 mm brass handles fabricated type polished complete all as specified and as directed.

S&F 300 mm brass sliding door bolt with sand or die cast brass hasp staple bolt type and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C1 1:3:6 using 20 mm graded stone aggregate finished even and fair as in plinth protection and hard standing complete all as specified and directed.

S&F in repairs stainless steel curtain rod 20 mm dia including side caps and single/double brackets complete all as specified and as directed.

S&F stainless steel wire cloth of 0.36 nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple comlete all as specified and as directed.

S&F 150mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in repairs 150mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F in repair galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with Tinned Tacks or galvanised wire staple complete all as specified and as directed.

S&F pressed steel windows (Double Leaf, Gauged and Glazed) with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F pressed steel ventilators with top hung shutters including box type hinges with steel handle and steel peg stay, complete all as specified and directed.

S&F framed work as in doors or gates of or other section with gusset plates, rails,braces etc. complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging of sliding with and including either hooks and hinges door fittings exclusive of steel sheeting or other covering, running rails and guides and hanging also fastening and fixing Fe-290 Gde E-165 complete all as specified and as directed.

S&F mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders etc., and similar works complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning & preparing the surface including a coat of wood filler with two or more coats complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and as directed.

M&L for kitchen and cupboard shutter in required sizes made out of Action Tesa HDHMR Board 18 mm thick one side decorative lamination & other side balancing lamination. The 18 mm thick board shutter finished at all level including all fixing hardwares and solvent as per the manufacturers instructions complete all as per direction of Engineer-in-charge and manufacturers specifications. Note:- Work to be carried out by manufacturers auth workers.

M&L for cabinet carcase of required sizes made out of Action Tesa HDHMR Board 18 mm thick one side decorative lamination & other side balancing lamination. The 18 mm thick board at all 4 sides and 8 mm thick board as backing of cabinet finished at all level including all fixing hardwares and solvent as per the manufacturers instructions complete all as per direction of Engineer- in-charge and manufacturers specifications. Note:- Work to be carried out by manufacturers auth workers.

M&L for shelf/partition of required sizes made out of Action Tesa HDHMR Board 18 mm thick one side decorative lamination & other side balancing lamination consisting of panel 18 mm thick board for supporting the hold of shelf /partition finished at all level including all fixing hardwares and solvent as per the manufacturers instructions complete all as per direction of Engineer-in-charge and manufacturers specifications. Note:- Work to be carried out by manufacturers auth workers.

S&F stainless steel auto closing hinges fixed to cabinet shutters complete as per Engineer-in-charge directions and manufacturers specifications. Make:- EBCO or techno-commercially equivalent.

S&F 100 mm stainless steel handles rectangular shape polished complete all as specified and as directed. Make:- EBCO or techno-commercially Equivalent.

S&F telescopic channel in required length including all fixing accessories/ hardwares all as directed by Engr in Charge. Make : EBCO or techno-commercially Equivalent.

M&L for 18/19 mm thick pre laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed

M&L for plain fillets, square rectangular or triangular in section clean sawn secured with nails or brads second class hard wood wrought exceeding 6 not exceeding 13 sqcm complete all as specified and as directed.

S&F for extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 40 mm complete all as specified and as directed.

S&F 100 mm brass handles, cast type, polished bright complete all as specified and as directed.

S&F ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified and as directed.

S&F butt hinges, 40 mm of size cast brass with mild steel hinge pin, bright polished type B-11 complete all as specified and as directed.

S&F latches of 75 mm size rim latches with two lever of brass body.stove enamelled finish, with brass knob or lever handle complete all as specified and as directed.

Demolition and breaking up drain pipes of any description of any size complete all as specified and as directed.

M&L for PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, laid in trenches or in floors,complete all as specified and as directed.

M&L for PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

M&L for PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

M&L for PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, fixed to walls,complete all as specified and as directed.

M&L for PVC (SWR) bends 110 mm any radius, complete all as specified and as directed.

M&L for PVC (SWR) bends 75mm any radius, complete all as specified and as directed.

M&L for PVC (SWR) bends 110 mm any radius,with access door complete all as specified and as directed.

M&L for PVC (SWR) bends 75mm any radius, with acess door complete all as specified and as directed.

M&L for 100mm PVC (SWR) floor trap,plain with grating including jointing with solvent cement, complete all as specified and as directed.

Separating, scraping & cleaning of reinforcement (Demolition of concrete measured separately) complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:3 mixed liquid integral WPC as per manufacturer instructions, finished even and smooth without using extra cement on fair faces of brick work or concrete surfaces at sunken floor complete all as specified and as directed. Note: Supply of Integral water proofing compound will be measured and paid seperately.

M&L for applying waterproof and damp proof treatments using a uniform coat of blown grade bitumen 85/25 @ 1.20Kg per Sqm conforming to IS 702/cold applied bituminious elestomeric coat over a coat of primer in sunken floor including cleaning surfaces complete all as specified and directed.

M&L for priming surfaces with a coat of primer @ 0.70Kg per sqm over a plastered surfaces and applying heavy treatment (for severe conditions) in sunken floor complete all as specified and as directed.

M&L for providing 150 micron black polythene film (1410 gms per 10 Sqm) complete all as specified and as directed.

M&L for APP modified prefabricated polymeric membrane 3mm thick and weighing not less than 3.6 kg/sqm reinforced with non woven polyster mineral finish weighing not less than 100 gm /sqm having softning point not less than 140 degree celsius longitudinal tensile strength not less than 300N/Sqcm, side lap & end lap 10 cm with torch application of membrane, over compatible primer @0.40 Ltr/Sqm and finishing with aluminium paint applied @ 0.10 Kg/Sqm finished in sunken portion complete all as specified and directed.

M&L for 20mm thick screed in CM 1:4 mixed with liquid water proofing compound over APP membrane in sunken floor complete all as specified and as directed.

M&L for providing 40mm bore, light grade GI spout at the lowest point with 30cm projection beyond the outer face of the wall in sunken floor complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for heavy duty durastone tiles non skid of size 300 x 300 x 13 mm thick as in floors etc, of type Rovers cotto/Decor zane natural set and jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles, complete all as specified and as directed.

M&L for heavy duty durastone tiles non skid of size 300 X 150 X 13 mm thick as in skirtings/dados etc, of type Rovers cotto/Decor zane natural set and jointed in neat cement slurry and pointed in white cement with pigment to match with the colour of tiles, complete all as specified and as directed.

M&L for self embosed grooves, bull nose finished, anti skid, full body homogeneous vitrified tiles for steps (Tread) of stairs of size 300x 1200x 13 mm or 300x 1000x 13 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in CM 1:6 complete all as specified and directed.

M&L for anti skid, full body homogeneous vitrified Tiles for Risers of Stairs of size 200x1000x 13 mm/ 200x 1000x 13 mm, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade over and including 10mm thick rendering in CM 1:4 on stone/brick/ concrete surfaces complete all as directed

M&L for pre polished machine cut green marble stone 18 - 20mm thick slab in flooring/ Cills, laid and jointed with grey cement slurry mixed with pigment to the shade of the slab including rubbing and polishing over and including 15mm thick screed in CM 1:4 complete all as specified and as directed.

Taking up/down unserviceable GI pipe and connections from the trenches or removal from walls, floors etc for the following sizes complete all as specified and as directed.

(a) 40 mm dia

(b) 25 mm dia

(c) 20 mm dia

(d) 15 mm dia

Supply and lay steel water tubing, medium grade galvanised with all fittings and laid in trenches/fixed on walls/floors etc for the following sizes complete all as specified and as directed.

(a) 40 mm dia

(b) 25 mm dia

(c) 20 mm dia

(d) 15 mm dia

S&F iron metal gate/globe valve with iron wheel screwed both ends for unions, pipes and fixed complete including dismantling old U/S valve of following sizes complete all as specified and as directed.

(a) 40 mm dia bore pipe

(b) 25 mm dia bore pipe

(c) 20 mm dia bore of pipe

(d) 15 mm dia bore of pipe

S&F ball valves 20 mm bore high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for laving of GI pipe complete all as specified and as directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removal of excavated surplus soil not exceeding 50 m and depositing where directed at al level not exceeding 1.5 m above the starting point complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan and power socket etc) complete including fixture and fittings such as switches, ceiling roses, sockets, light fitting, bell etc, removing materials to store for keeping insafe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good matching with the existing colour to the disturbed surfaces of wall, floors etc, complete all as specified and directed.

M&L for point wiring complete 1.5 Sq mm FRLS grade single core PVC insulated, unsheathed, 1100V grade copper multistranded conductor drawn through and including rigid PVC conduit medium grade concealed on surface of walls, roofs, floors, truss etc including PVC insulated copper earth continuity conductor 1.5 Sq mm cable connected to common earth dolly including steel terminal boxes suitable for modular plate for accomodating the switches, sockets, regulators etc complete all as specified and directed. Note: Modular frame plate with match cover will be measured and paid seperately.

(a) One light/exhaust fan point controlled by one switch.

(b) One 5A 3 pin/5 pin socket point on independent board.

(c) One bell point controlled by one bell push.

(d) One light point controlled by 02 two way switches.

All as per item No 140 here in above but wiring with 2.5 Sq mm for 5/15 Amps socket on independent board complete all as specified and as directed.

S&F modular switch one way 6 Amps 1 module complete all as specified and as directed.

S&F modular switch two way 6 Amps 1 module complete all as specified and as directed.

S&F modular socket 6 Amps 2/3 pin 2 module complete all as specified and as directed.

S&F modular switch one way 16 Amps 1 way 1 module complete all as specified and as directed.

S&F modular socket 6 Amps/16 Amps 3 pin 2 module multipurpose complete all as specified and as directed.

S&F modular bell push flush type 6 Amps 1 module complete all as specified and as directed.

S&F Buzzer, ding dong AC 230 Volts, single pole complete all as specified and as directed.

S&F frame plate with match cover one module plate complete all as specified and as directed.

S&F frame plate with match cover two module plate complete all as specified and as directed.

S&F frame plate with match cover three module plate complete all as specified and as directed.

S&F frame plate with match cover four module plate complete all as specified and as directed.

S&F frame plate with match cover six module plate complete all as specified and as directed.

S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and as directed.

S&F in replacement wall mounted 20 W LED 6000K (4 ft) batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver,complete all as specified and as directed. Make: Havells, Model: Endura linea Ne, Cat No: LHEWEBP7IN1W020 or techno-commercially Equivalent.

S&F in replacement wall mounted 10 W LED 6000K (2 ft) batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver,complete all as specified and as directed. Make: Havells, Model: Endura linea Ne, Cat No: LHEWEBP7IN1W010 or techno-commercially Equivalent.

S&F in replacement decorative, wall mounting SS finish fixture with textured glass diffuser suitable for LED lamp with all accessories complete all as specified and as directed Make: Havells, Model: Ehony, Cate No : LHJE04104499 or techno-commercially Equivalent.

S&F 7 W LED lamp with base B22 complete all as specified and as directed.

S&F in replacement Environmental friendly, ultra modern, energy saving, surface mounted decorative oval bulk head edge lit LED luminaire comprising of high brightness LEDs 10 W with opal diffuser,complete all as specified and as directed. Make: Havells, Model: Epdura Rughy NEO - IP65, Cat No: LHEOAOP7UZ6W010 or techno-commercially Equivalent.

S&F in replacement round surface mounted LED flat panel 12 W luminaire PDC aluminum housing and PMMA diffuser with all accessories complete all as specified and as directed. Make: CG, Model: Pearl II, Cat No: LCDSPLN-R-12-CDL or techno-commercially Equivalent.

S&F LED in replacement LED security light fitting of 25 watts comprising of epoxy powder coated housing enclosed with glass cover in frame, with protection IP65 complete with all accessories fixing in and including GI bracket of suitable size/dia complete all as specified and as directed. Make: CG, Model: Astra, Cat No: LSTS-25-CDL or techno-commercially Equivalent.

Taking down copper/aluminium sub main wiring of any size and runs complete and removing materials to store for keeping in safe custody for taking credit (credit for above items should be made as per conditions seperately) and making good matching with the existing colour to the disturbed surfaces of wall, floors etc complete all as specified and as directed.

M&L for sub main wiring using 2 runs of 2.5 Sq mm FRLS PVC insulated copper conductor 1100 Volts grade conforming to IS specification drawn through and including PVC conduit along with 1 run of 2.5 Sq mm PVC insulated copper conductor FR cable as earth lead connected to common earth dolly complete all as specified and directed. Note: One run of PVC conduit, 2 runs of 2.5 Sq mm PVC insulated copper conductor and 1 run of 2.5 Sq mm PVC, insulated copper conductor cable will be measured as on unit. (For Building security light)

All as per item No 163 here in above but wiring with 2 runs of 4 Sq mm as main and run of 4 Sq mm as earth. (From Indl DB to Geyser point) complete all as specified and as directed.

All as per item No 163 here in above but wiring with 2 runs of 6 Sq mm as main and run of 6 Sq mm as earth. (From main DB to indl Qtrs DB) complete all as specified and as directed.

S&F single pole & neutral enclosure with a 2 pin and earth plug and socket complete with and including one single pole MCB 20 Amps complete all as specified and as directed.

Taking down of old unserviceable RCCB, MCB, MCB DB of any size/type/ways complete and removing materials to store for keeeping insale custody for laking credit (crdit for abov items should be made as per conditions seperately) and making good matching with the existing colour to the disturbed surfaces of wall, floors etc. complete all as specified and as directed.

S&F MCB DB SPN 12 way double door type 240 Volts including necessary bus bar, neutral link, earth bar one complete all as specified and as directed.

S&F MCB SPN 6.32 Amps complete all as specified and as directed.

S&F MCB SP 6.32 Amps complete all as specified and as directed.

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3 and making good, cutting not exc 20 cm girth complete all as specified and as directed.

Supply and fix rigid non-metallic PVC conduit of size 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as complers, lock nuts, saddles, pipe etc complete all as specified and as directed.

Taking down old U/S Exhaust fan and supply and fix Exhaust fan with PVC body 250 mm sweep including removing the existing old one and depositing to MES store yard for the safe custody of the item complete all as specified and as directed.

Supply and fix in replacement modular TV socket Co-Axial complete all as specified and as directed.

sree devi construction

SREERAM