CA No CWE/PM/N-26/2019-20 REPAIR TO INTERNAL ROAD AT OTM AND MD ACCN OFFRS JCOs OR ACCN OF AF STN PALAM UNDER GE AF PALAM DELHI CANTT

Amount

M&L for repair to pot holes any depth, area n.exc. 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25 mm in depth and making good by applying tack coat with bitumen of grade VG 10 @5 kg/ 10 Sqm, putting in premixed bituminous macadam using paving bitumen of grade VG 30 well rammed, sealed with binder @ 9.8 Kg/10 Sqm blinded with 0.09 cum of stone chipping of 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of pot holes n.exc. 30 mm rolled with power road roller of 08 to 10 tonne capacity complete, all as specified and directed by Engineer-in-Charge.

M&L for preparing existing black top surfaces of road by brushing with wire brushes for removing caked mud etc., seeping with broom and finally fanning the cleaned surface with gunny bags or compressed air to remove all loose dirt etc. on black top surfaces complete, all as specified and directed by Engineer-in-Charge.

M&L for applying evenly a priming tack coat with bituminous primer using paving bitumen of grade VG-10 @ 5 Kg/10 Sqm surface complete, all as specified and directed by Engineer-in-Charge.

M&L for premix bituminous semi dense asphaltic concrete 30mm consolidated thickness using paving bitumen of grade VG-30 with 5.5% binder content by weight of total mix, mixed by computrized hot mix plant, laid by mechanical paver, rolled and compacted to required camber and gradient by using power road roller of 8 to 10 tonne capacity complete, all as specified and directed by Engineer-in-Charge.

M&L for preparation of road surfaces (old or new) to receive the thermoplastic paint and making of guide line, dash arrows, letter etc. with reflective thermoplastic paint 1.5 mm average thick white, golden, yellow or black colour as required using glass beads necessary for achieving reflection on roads, pavement and the like of any description and in any width complete, all as specified and directed by Engineer-in-Charge.

S&F in repair solar road delineator with 4 pcs ultra bright LED, colour (R/Y) flash mode off in day light and flash in night automatically built in silver gilt cup, increase the light scope the level can be hold, can be put in traffic core if in iron bracket can be flat view distance 800 mtr (in darkness by using solar energy base material of ABS or aluminium unit may be mounted vertically or horizontally to surfaces such as metal concrete, wood or asphalte, unit may be used with rubber traffic safety cones that include a top inside hole diameter of at least 1.5/1.6 inches to accommodate sole unit may be used for make the hole body of the traffic cum lighting in PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) including necessary excavation (150mm x150mm x 150mm), earth work removal of soil to a distance n.exc 50 m (Item code ABSU 156) or equivalant complete, all as specified and as directed by Engineer-in-Charge.

S&F as in repairs, dark cat eye two way reflective of dimension, 180 mm x 100 mm x 20 mm of plastic body reflective panel - Amber or red complete, all as specified and directed by Engineer-in-Charge.

Demolition of stone slab paving of any description or thickness complete, all as specified and directed by Engineer-in-Charge.

M&L for 25mm thick sand filling under floors or in foundation including consolidation complete, all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast cement concrete interlocking paver colour tiles confirm to IS-15658 of 80mm thckness, M-35 with grey cement & pigment complete, all as specified and directed by Engineer-in-Charge.

S&F chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick with grey cement and pigment, set jointed and pointed in neat cement slurry in floors laid over 15 mm thick screed bed in cement mortar 1:4 complete, all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (kerb stone) of any description and in any position not otherwise specifically provided complete, all as specified and directed by Engineer-in-Charge.

M&L for factory made precast cement concrete kerb stone of PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) including weatherings, slightly rounded or chamfered angles and throating etc. and setting in cement mortar (1:4) with joints to match complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated plastered/concrete surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete, all as specified and directed by Engineer-in-Charge.

Hindustan Co.Co

Ram Parkash Constructions Pvt. Ltd.

R K GOEL ABHEY KUMAR JAIN