SPECIAL REPAIR TO BLDG NO P-03 (RE APPROPRIATED OFFRS TRANSIT ACCN) AND CERTAIN REPAIRS TO BLDG NO P72 (RE APPROPRIATED OFFRS GUEST ROOM) AT MIL STN GAYA, PROVN OF STORE (6X7 MTRS) AT STATION HEADQUARTERS GAYA AND SPL REPAIR FOR INTERNAL AND EXTERNAL

Amount

M & L for vitrified double charge tiles light shed 10 mm thick ( square or rectangular) polished, area of each tiles exc 0.36 sqm but not exc 0.42 Sqm each in floors etc. set and jointed with cement and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with CM 1:4 complete.

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick screed bed or bedding layer with CM 1:4 complete.

M & L for Glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 7-8 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles including taking down old tiles complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

S & F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work in cup board and pelmet boxes etc. complete all as specified and directed.

S & F continuous (Piano) hinges,mild steel, bright finish or electro galvanised, width of flaps (when open) 30 mm complete all as specified and directed.

M & L for 35 mm thick Flush shutters, solid core construction, with block board core and 5 mm thick plywood face panels on both side, commercial type on both sides covered face veneered decorative type etc.

M&L for Glazed and skeleton shutters 35mm thick, 2nd class hardwood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified, supplied and fitted to chowkats complete.

M & L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.

M & L for pressed steel door frame size 165 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.

M&L for providing PCC 1:3:6, type C-0 (using 12.5 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc.

S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engr- in- charge.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size n. exc 0.50 Sqm each complete all as specified and directed by Engr-in-charge.

S&F 4mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqm each pane complete all as specified and directed.

S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair 15 mm dia stop valves/angle valve, cast copper alloy,fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. (Make-SEIKO/Plumber/ Parryware/ Essco)

S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and as directed. Prayag/Polytuff/Symet

S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified and as directed Make : SEIKO/Plumber/Parryware

S& F PVC ( SWR ) nahani ntrap / floor trap 75 mm dia with and including CP grating all as specified and as directed. Make - Reliance, finolex, supreme, kisan, prince

S&F in repair 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed Make : Prayag/Polytuff/Symet

S&F in repair 15 mm dia two way angle valves/Bib taps, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make-SEIKO/Plumber/Parryware/Essco)

Supply & fix in repair brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge. (Make-SEIKO/Plumber/parryware/Essco)

Supply & fix in repair brass chromium plated wall mixer (2/3 hole) with provision for connection to shower rose for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge. (Make-SEIKO/Plumber/parryware/Essco)

S &F as in repair chromium plated shower rose 125 mm dia with 300mm CP shower arm fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. (Make-SEIKO /Plumber / parryware/Essco)

S & F brass chromium plated tublar towel rail 20 mm dia D type 600mm long between flanges with CP screws etc complete all as spd (Make-SEIKO/Plumber/parryware/Essco)

S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia all as spd and directed (Make-Zoloto/NMC/Leader).

S&F PVC waste pipe size 32 mm X 800 mm flexible with coupling for Urinal/WHB/Sink etc. complete all as specified and directed.(Make-Prayag/Symet/Polytuff)

S & F in repair 100 mm/ 125mm dia mild steel chromium plated grating (double Q) fixed on floor trap / nahani trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.

S & F Male Brass Threaded Adaptor (MTA/ MBTA/Female Brass Threaded adaptor (FTA/ FBTA) 20 mm dia complete all as specified.

S & F Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed by Engr-in-charge.

S & F Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing of 15 mm dia and connections, including cleaning for re fixing or removal to store

Taking up or down steel tubing of 20mm dia and connections, including cleaning for re fixing or removal to store

S & F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old size bricks with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 10mm thick internal surfaces on fair faces of brick work in cm 1:6 as directed by Engr-in-charge.

M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and fair without using extra cement with WPC 2% by wt of cement. Note:-WPC measured and paid separatly

M&L for applying 1.50 mm thick wall care putty in two coats incl preparation of newly plastered wall surfaces complete all as specified and directed.

M&L for applying 1.50 mm thick wall care putty in two coats incl preparation of old plastered wall including complete removal of existing treated surfaces complete all as specified and directed.

M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of putty new plastered wall surfaes

M&L for applying two coat of acrylic distemper as in ceiling incl removal of existing treatment of old treated ceiling surfaces

M&L for two coat cement base paint over a coat of primer including preparation of newly plastered external wall surfaces complete all as specified and directed

Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level)

M & L for Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate), 25 mm thick in flooring etc complete all specified and as directed

M & L for 75 mm thick Cement concrete type C- 1, 1:3:6 (20mm graded aggregate) as in sub base

M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified.

M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces.

M & L two coats of synthetic enamel painting on wooden surfaces exc 10 cm width or girth over one coat of pink primer including preparation of new wooden surfaces.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed

Demolition and breaking up drain pipes upto 100 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed

S & F of PVC (SWR) vent cowl for 110 mm bore pipe

S&F Aluminium handles cast type anodised handles, D shape of size 150mm complete. ISI marked

S & F as in repair alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.

S & F in repair sinks made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete

S & F in repair vitreous china wash basin oval shape white flat back size 550 x 400mm waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners all as specified and directed by Engr-in-charge. (Make:- Parryware/ Hindware /Jaguar)

S & F of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete. Make : Jaguar/Hindware/Kohler

S & F as in repair 10 litre PVC valveless, syphonic action type, Dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets (Make:- Parryware/ Hindware /Jaguar)

S & F as in repair soft closing white Seat Cover for EWC incl accessories complete all as spd

M & L for repair of sunken slab as under :- (a) M & L for application of 1:3 cement – sand mortar, mixed with Sika Latex emulsion (300 gram in 1 Kg cement), as a coving at the corners of floor and the vertical surface in the sunken area and between floor and walls in the remaining area. (b) M & L for application of Sika Top Seal 109hi @ 2.20 Kg per Sqm each coat or as per manufacture instruction– acrylic based, ready to use, cementitious, water proof coating onto the prepared surface in a continuous film on the floor of the sunken area, taking the coating over the vertical surfaces on to the floor and over the coving on to the wall (before tiling) to at least 300mm above the final finished floor level. The coating shall also be continued on to the inner surfaces of the pipe penetration holes. Two coats shall be applied & fiber Glass Cloth to be laid in between coats. (c) M & L for application of Sikagard 694 F (I) @ 100 gram per Sqm or as per manufacture instruction, a moisture insensitive epoxy putty in a continuous, 10mm thick gasket around the pipes to a width of approximately 15mm. (d) M & L for application of protective screed concrete at a desired thickness admixed with Sika Cim Pink @ 100 gram per Sqm or as per manufacturer instruction

S & F mild steel butt hinges, medium weight cold rolled of size 100 mm .

S & F 150 mm long aluminium anodised barrel tower bolt of extruded section

S & F 200 mm long aluminium anodised barrel tower bolt of extruded section

Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame).

Taking down chowkhats for frames exc 1.5 Sqm but n exc 4.00 Sqm (without taking shutters from the frame).

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F Solid PVC factory made Door shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing

M&L for providing water proofing treatment over non-approachable roof surfaces with super thermo APP modified water froofing membran comprssing of following for non-approachable roof: (i) Removal of existing roof treatment and cleaning sweeping and washing and down with water to remove all dust etc from plastred roof surfaces/wall and filling of crack with sealing compound etc.& 10mm thick plastering in CM 1:4 on roof surfaces mixed with water proofing compound. (ii) Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm. (iii) One layer of super thermo APP modified water proofing membran with non polyster reinforcement of Make (M/S STP texsa Ltd/hyperplus membrane of M/S IWL India Ltd. M/S STP and Tikki Tar Ltd ) 3mm thick and minimum weight @ 3.50 Kg/sqm laid with gas torch and fasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooving and making good with PCC gola 1:2:4 type B1 etc adhere to bitumen all as per manufacturer instructions. (iv) Applying two coat of aluminium paint @ 0.20 kg/sqm per coat over bitumen layers as per manufacturer instruction (application including side lap overlaps shall be provided not less than 10cm and jointed sealed with torch as per manufacturer instruction specification.

Supply only liquid water proofing compound ISI marked.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/ aluminium sub main wiring of any size from surface/ concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M Gaya complete all as specified and directed.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Gaya complete all as specified and as directed.

M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One ceiling / exhaust fan point controlled by one, one way switch 5 Amps

(c) One 5 Amps socket outlet point controlled by one switch on the same board.

(d) One 5 Amps socket outlet point controlled by one switch on independent board.

(e) One bell point controlled by one, bell switch 5 Amps

Description all as per item No 6 here-in-before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket combination point including necessary running of 2.5 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly.

Description all as per item No 6 here-in-before but using 4.0 sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly.

S&F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete.

S&F modular switch piano flush type, single pole, one way and 5/6 Amp single module complete.

S&F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete.

S&F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete.

S&F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete.

S&F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete.

S&F bell push modular 6 Amps single module complete all as specified.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten/ slanting fittings complete.

S&F bell electric ding dong type suitable for operation on 230 volt 50 Hz AC supply complete.

M&L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S & F sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.

S&F MCB single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.

S&F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.

S&F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed

S&F decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed.

S&F LED tube light fitting 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed.

S&F energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opal diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed.

S&F wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed.

Labour only for refixing of water heater storage type (Geyser) vertical/ Horizontal type obtained from item No. 4 above including 04 Nos of hold fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold complete all as specified and as directed.

Labour only for refixing the celing fan/ exhaust fan obtained from item No. 5 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and directed.

S&F ceiling fan, 230 Volts, 1200 mm sweep with service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal complete all as specified and directed.

S&F energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note: Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide on plan in soft/loose soil and getting out complete all as spd and directed by EIC

Excavating in post holes (or similar holes) in hard/dense soil each not exc. 0.5 cum, getting out. returning, filling in and ramming earth or broken rubble mixed with earth around. in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc. 50 m and making good surface

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil.

Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point

M & L for mild steel TMT bars 10mm dia and over cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire not less than 0.9mm dia.

S & F for mild steel TMT bars 6mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length bent to shape as reqd. incluing cranking, bending and binding with ms wire not less than 0.9mm dia complete.

Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work complete

M & L for RCC Type B1 1:2:4 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as spd.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle iron cleats or other connecting plates all as specified and directed. Fe410-W (gde-E-250) quality- A

S & F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 (Gde E-165)

S & F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F pre-painted galvalume aluminum zinc coating (AZ 150) GI based plain steel sheet 0.5mm thick of any coloure in ridge having tensile strength of 550 Mpa fixed with self tapping screws as spd and directed by eng-in-charge etc.

M&L two coat of syntetic enamel paint over new steel surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer including preparation of surfaces complete.

M & L Readymix plaster 15mm thick on any faces of brick work or concrete surfaces, finished even and smooth all as specified.

M & L Readymix Plaster 10 mm thick on any faces of brick work or concrete surfaces, finished even and smooth.

M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of old/new plastered wall surfaces.

M & L preparation of new plastered or unplastered surfaces and applying two coat of cement base paint on walls complete all as specified and directed.

S & F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-charge.

M&L cement concrete type C2 1:3:6 (40mm graded agg) as in foundations,filling and mass concret

M&L for 32 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sides including 5 mm thick edging/beading on exposed to view on sides & top complete.

S & F of powder coated aluminium alloy handles, fabricated type, anodised 100 mm long

S&F as in repair alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified.

M&L two coat of synthetic enamel paint over new wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete.

M&L for PCC 1:2:4 type B1 (using 12.50mm graded aggregate) in copings, lintels, upto 1.5m, cills, steps, band, parapets, railing and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered including necessary form work

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Gaya complete all as specified and directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including concealed PVC conduit of size 20/25mm ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylum sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

S&F switch piano type single pole 5 amp, 230 Volts complete all as specified and directed.

S&F switch piano type single pole 15 amp, 230 Volts complete all as specified and directed.

S&F socket outlet 2-in-1, 3 pin, 5 amp, 230 Volts complete all as specified and directed.

S&F socket outlet 2-in-1, 3 pin, 5 and 15 amp flush type, 230 Volts complete all as specified.

S&F stepped type electronic fan regulator flush type complete all as specified and directed.

S&F lamp holder, PVC / Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed.

S & F MCCB 4 pole, 125 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed.

S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) including electrical connections from ceiling rose to fan terminal complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed.

Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ ducts, on poles etc of size 3.5 core x 35 Sqmm complete all as specified and directed

Burnt bricks sub class 'B' laid flat dry across the cable for cable protection all as specified and directed.

Sand cushioning to UG cable 8cm thick before laying the cable and 15cm above the cable, stretching and testing of cable complete all as specified and directed. Note: (i) Consolidated / Punned sand shall be considered for purpose of payment (ii) Sand shall be same as specified for plastering work.

M & L for point wiring complete with PVC insulated unsheathed FRLS multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC conduit pipe 20mm dia medium grade ISI marked complete with one run of PVC insulated unsheathed FRLS multistranded copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part-I 1991 with provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes concealed on wall, with 3 mm thick laminated sheet top cover ISI marked. Make: Hylum/Anchor for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor complete area in same specification as per existing all as specified and directed.

(c) One 3 pin socket outlet 5 Amps on independent board.

All as per item No.1 here-in-before but 3/5 pin socket outlet point 15 Amps independent, with cables of size 2.5 Sq mm multistranded, PVC insulated unsheathed FRLS copper conductor cable and 1.5 sq mm PVC insulated unseathed FRLS copper conductor cable as earth continuity conductor connected to common earth dolly all in separate PVC conduit medium grade not less than 20mm dia ISI marked including provn of GI sunken box thickness not less than 1.12 mm & 3 mm thick laminated hylem sheet top cover of required size all as specified and directed.

S & F switch piano flush button single pole one way 5 Amp.

S & F for socket outlet 2-in-1, 5 pin, 5 Amps flush type.

S & F switch socket combination 2-in-1, 3 pin, 5/15 Amp flush type universal.

S & F sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and directed.

S & F MCB single pole and neutral, 240 volts, 40 to 60 Amps, all as specified and as directed.

S & F MCB single pole, 240 volts, up to 40 Amps, all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.0 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply, laying and testing XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured heavy duty electric power cable 1100 volts with stranded aluminium conductor of size 16 Sqmm 2 core laid in trenches or under road complete all as specified and as directed.

M&L for earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.00 mm thick buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized wire 4mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 25 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 3 of SSR-2010 Part I and including necessary excavation and earth work in any type of soil, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC (1:3:6) type C-1 chamber, CI Earthing Pit cover 300 x 300 mm with angle iron 20 x 20 mm, 3 mm thick complete all as specified. Note: (i) The unit rate includes earth lead and protection pipe up to maximum 7.5 metre from earth plate to earth point/test point. (ii) Earth pit shall be constructed minimum 0.5 metre away from earth.

M/S ABHAY KUMAR AND BROTHERS (BID ID -3273801)