REPAIR/REPLACEMENT TO JOINERY AND OTHER ALLIED WORKS AT VIKRAM VIHAR, VRC AND 274 TRANSIT CAMP IN THE AREA OF AGE B/R-I UNDER GE (SOUTH) DELHI CANTT-10

Amount

Taking down chowkhats or frames with shutter exc. 1.5 sqm and n exc.4.00 Sqm each but without taking off shutters from the frame including make good disturbed portion as per the existing surfaces complete all as specified and as directed.

Taking down chowkhats or frames with shutter n exc 1.5 sqm each but without taking off shutters from the frame including make good disturbed portion as per the existing surfaces complete all as specified and as directed.

Taking down shutter of any description exc 1.00 sqm but not exc 2.00 sqm each complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. (Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately under respective item).

S&F 35mm thick FACTORY MADE B/S PRELAM WIRE MESH SOLID PVC DOOR SHUTTER consisting of frame made out M.S. tubes of 19 gauge thickness and size of stiles as 19mm x 19mm and 15mm x 15mm for top, lock & bottom rails, M.S. frame shall have a coat of metal primer of approved make and manufacturer. 19mm x 19mm M.S. square tubes shall be covered with heat moulded Prelam sheet 'C' /Cbm Prelam sheet 'C' channel made from 5mm (+0.25) thick PVC Sheet of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certifiied Company, of size 35mm thickness, 115mm width out of which 100mm shall be flat and 15mm shall be bent in 90o angle on either side formning stiles, one of the 90o bend edge is cut from stiles as well as rails to nail from inner side of door to hide wire mesh fixing steel screws. 5mm (+0.25) thick 140mm wide PVC sheed out of which 125mm shall be flat and 15mm shall be bent in 90o inner side to form top and bottom rail and 155mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be bent in 90o screws shall be paid separately), additional 5mm (+0.25) 'thick PVC strip of 20mm width is to be stuck on the interior side of the C' Channel using PVC solvent cement adhesive. Panel will be of GI/SS wire mesh on 24 gauge to be fitted inside area of stiles & rails. The wire mesh in top, bottom & lock rail is sealed with 15mm x 15mm tube with steel srew of size 13/6mm. 10mm (5mmx2 Nos) thick PVC strip of 25mm width is to be stuck & nails on both side of GI wire mesh interior at the top, bottom & lock rail. 10mm thick (5mm x2Nos) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail Door to be fixed to frame with 3 nos. M.S. powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S. tube. Other hardware's should be fixed with 19x6mm size steel screws etc as per manufacturere's specification and drawings complete all as specified and as directed.

S&F factory made solid panel FRP door shutter 30mm thick premoulded design made out of solid core, laminated 1.5 mm to 2mm thick GRP/FRP made of superior all seson, weather resistant polyester get coat followed by laminating polyster resin of 450 gm glass mat termite including 02 Nos Tower bolt, 06 Nos Hinges, 02 Nos handle best quality as per manufacturer's insruction and specified, including fitted to Angle iron chowktas with all welding arrangement etc complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 45 x 70 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (MS hold fast/hugs or SS dash fasteners shall be paid for separately under respective items) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable, but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. (Note: Stainless steel butt hinges and necessary SS screws shall be paid separately under respective items)

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5 mm x 38.10 mm x 1.5 mm thick, shutter with section 47.62 mm x 44.45 mm x 1.5 mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads complete all as specified and as directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra payment shall be paid separately.

M&L powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra payment shall be paid separately.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x125 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and lengthcomplete all as specified and as directed. (MS hold fast/hugs or SS dash fasteners shall be paid for separately under respective items) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x100 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (MS hold fast/hugs or SS dash fasteners shall be paid for separately under respective items) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable, but no extra payment on this account shall be made.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats S&F for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F in repair 6mm thick plywood grade BWP, type BB fixed with screws to timber frame work or with adhesive in cup board etc complete all as specified and as directed.

S&F teakwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area n.exc. 3 Sqcm including polishing complete all as specified and as directed.

S&F 200 mm long aluminium anodised barrel tower bolt extruded section complete all as specified and as directed.

S&F 150mm long extruded aluminium alloy handle complete all as specified and as directed.

S&F 100 mm long butt hinges medium weight cold rold mild steel including welding to frame etc complete all as specified and as directed.

M&L for preparation by complete removal of existing treatment , wahsing down and stopping of distempered and painted surfaces of old plastered or unplastered surfaces of walls and ceilings and thereafter applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care putty complete all as specified and as directed.

M&L for preparing old decorated steel surfaces of any description not otherwise described over 10 cm width or girth & applying one coat of synthetic enamel paint of any colour complete all as specified and as directed.

M&L for preparation of newly surfaces of steel of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified.

M&L for preparation of old decorated surfaces of wood of any description not otherwise described width or girth and applying one coat of synthetic enamel paint complete all as specified.

S&F in repairs mild steel 300 mm long ordinary rat tail rod pattern sprngs including roller and roller plate complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thickon walls in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1: 3 on concrete surfaces of ceiling,chajja etc, finished fair and even complete all as specified and as directed.

M&L for preparing newly plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including a coat of wall care putty complete all as specified and as directed.

M&L for preparing newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

S&F in replacement steel window handles(right & left) and peg stays etc as per sample complete all as specified and as directed.

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F second class hard wood plain fillets, sectional area exc. 6 but nexc. 13 Sqcm, square, rectangular or triangular in section, clean sawn, fixed with screws to walls complete all as specified and as directed.

M&L for Granite (of any type) work, 18-20 mm thk (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms etc with necessary hole for gas pipe where ever required and likes over and including 20 mm thick screed bed in CM 1:6 including pointing in white cement using marble dust with admixture of pigment to match including rounding the edges with shade of granite complete all as specified and as directed.

S&F sliding door bolts 300 mm long clip type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F in repairs 12 mm thick prelaminated particle board, ISI marked,interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work for doors,partitions,on wall,in cup boards/kitchen cabinets etc,in shelves, partitions and shelves of built in cup board, almirah, book case, toilet boxes, racks,pelmets and similar works etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Dismantling boarding of any description and fixed in any position with nails complete all as specified and as directed.

S&F 18 mm thick wood plastic composites (WPC) board for shutters, 100% solid with density not less than 650 Kg per cubic meter , one side wood grain finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and as directed. Notes : (a) Pattern & design of WPC board to be decided by GE. (b) Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid extra. (c) Locking arrangement shall be provided in rooms cupboard shutters. The rate quoted by the tenderer shall deemed be included for the same.

S&F 18 mm thick wood plastic composites (WPC) board for partitions, 100% solid with density not less than 650 Kg per cubic meter , both side white finished laminated for exposed/external surface , fixed with screws fitted under or above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc complete all as specified and as directed. Notes : (a) Pattern & design of WPC board to be decided by GE. (b) Items like cupboard knobs, stainless steel channel, CP plate clip hinges to be paid extra. (c) Locking arrangement shall be provided in rooms cupboard shutters. The rate quoted by the tenderer shall deemed be included for the same.

S&F telescopic channel 18" long fixed in cupboards complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and as directed.

M&L for welding in repair in any situation and in any position, such as hinges and similar articles etc for steel door, gates, window, ventilatiors and grills etc for upto four storeyed building complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work etc complete all as specified and as directed.

S&F in repairs 5.5 mm thick counter wash hand basin mirror of size 0.75 mtr x 0.60 mtr bevelled type edge and fixed with 6 mm thick backing of commercial ply wood with 04 Nos CP bracket etc complete all as specified and as directed.

Note :- (i) The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender. (ii) If any item of same description in nature is found to be entered as "double in BOQ" and the bidder quotes different rates against same item, then the rate quoted on lower side shall be applicable and higher rate will not be allowed to be paid in any circumstances. No claims on this account shall be entertained on a later date.

M/S Davinder Kumar (BID ID -3160928)

M/S Parmod Johar (BID ID -3155358)

P R Constructions (BID ID -3160600)