ADDITION ALTERNATION OF BUILDING NO P 34 (F 1) AND EXISTING SHED IN JYESTHA DHANISTHA COMPLEX AT COLABA MUMBAI UNDER GE (NW) NOFRA

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Taking down chowkats or frames but exceeding 1.5 sqm each but n exc 4 sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F 1.50 mm thickness plain sky light panel of fibre glass reinforced transulent sheet having a minimum acrylic modified resin content of 15% a or equivalent with two side lap fixed with self driven screw or by wire as specifed by the Engr-in-Charge

Dismantling Single layer Mangalore pattern or similar tiles in roofing, complete all as specified.

M&L for roof tiles, Mangalore pattern , interlocking at side joints laid dry complete all as specified.

M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified.

Excavation in trenches not exc 1.5 m in depth and n exc 1.5 m in width for foundatins, etc or for shafts, wells, cesspits, manholes, pier holes and getting out in hard/ dense soil, complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceedingeeding 25 cm

Removing excavation material exceeding 1.50 km but n exceeding 15 km and depositing where directed

M&L for Mild Steel as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingndistance pieces, cleats etc conforming to Fe 290 (Gde E-165) complete all as specified.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

Demolition of brick work built in cement mortar, complete all as directed.

M&L for brickwork with sub class 'B' bricks, straight or curced on built in CM 1:4, complete all as specified.

M & L rendering 15 mm thick on fair faces brick work in CM 1:4 to be finished & smooth (without using extra cement) complete all as specified

M&L for Preparation of newly plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint (all weather proof) of required shade over a coat of exterior primer, complete all as specified.

M&L for rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for Rendering 10mm thick on fair faces of ceilings in CM (1:3) & rendering is to be finishing even & smooth without using extra cement., complete all as specified.

Material and labour for preparation of new plastered surface of wall and applying 2 coats of oil emuslion distemper over a coat of primer on 2 to 3 mm thick wall care putty all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coats of oil emuslion distemper complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying two coats of oil emuslion distemper over a coat of primer on 2 to 3 mm thick wall care putty all as specified and directed.

Material & labour hardcore of broken stone or boulders of guage exceeding 63mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolled/rammed to a true surface

M&L for cement concrete (1:4:8) type D2 (40mm graded stone aggregate)in foundation filling, in sub base of flooring and mass concreting etc complete all as specified and directed.

Use & waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) fair finished surfaces.

Material & labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips.

M&L for RCC (design mix) M-30 (20mm graded aggregate) for slabs supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Chequered cement concrete tiles with grey cement & pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6, complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as directed.

M&L for machine cut cudappah stone slab 50mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite., and nosing /rounding to edges of stone slabs one edge, all as specified and directed .

Supply and fix colour powder coated (50 micron minimum thickness) aluminium section for sliding/fixed in frame/shutter for doors, windows, ventilators etc with one or more rebate, including joining cleats for fixing, fixed type/louvered window or ventilator with or without sash bars including necessary locking arrangements, glazing clips, rubber packing, anodized aluminium snap beading, screws etc complete all as specified and directed. (Note :- (i) Glazing shall be measured and paid separately. (ii) Item shall be paid as per weight of aluminium sections as per manufacturer catalogue. However the rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws, appropriate handle, locking arrangement etc.)

Supply & fix Sheet glass, ordinary quality in square exceeding 0.50Sqm each pane, 4.80mm thick fixed to Aluminium section complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S&F powder coated aluminium grill with and including suitable powder coated aluminium anodised frame F/H section as requird manufactured by approved make as per design No DG- 104, 7.5 mm thick all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and removing serviceble tiles to store and rubbish off the permises.complete all as specified & as directed.

M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointing in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm as in skirting etc set and jointed in neat cement slurry and pointee in white or coloured cement to match incl 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L, Glazed ceramic tiles coloured of size 350x 250x 7 mm/ 450X 300X 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick backing coat in CM 1:4, complete all as specified.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified.

S&F PVC wall panelling consisting of 5mm thick wood grain printed PVC sheet and fixed over GI running channels 50mm wide and 0.6mm thickness at every 1m interval , fixing over brickwall /concrete walls with screws and all corners, top and bottom portion of PVC lining covered with L/T shaped PVC sheet of same colour/texture including all necessary cuttings near switch boards and other fixtures if fitted over wall, complete all as specified.

M&L for Preparation of old plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint (all weather proof) of required shade over a coat of exterior primer, complete all as specified.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and incl taking down of old steel of any specfication or size as specified and directed.

Dismantling of ceiling boards any thickness etc including aluminium grid frame work complete all as specified and as directed.

M&L for false ceiling made out of 600x600x 4 to 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified.

M&L PCC 1:2:4 B1 (20mm graded stone aggregate) as in bed blocks, copings, benchings, railing, bends etc incl necessary form work complete all as specified and directed.

Supply only integral water proofing compound complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer on wall complete all as specified and directed.

M&L for preparation of old plastered surface, washing rubbing down and stopping of painted surface of wall and applying 2 coats of oil emuslion distemper over a coat of primer over 2 to 3mm thick wall care putty all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer on wall complete all as specified and directed.

S&F in repairs fancy type Stainless Steel drapery rods of 20-25mm size incl decorative brackets at the end and fixing in brick/ concrete surface with SS Screws complete all as specified and directed.

Taking down chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutters from the frame), complete all as specified.

Supply & fix aluminium anodised grill (minimum thickness of anodising 50 micron) with and including suitable aluminium anodized 'E'/'H' section frame as required with aluminium rebated/screwed attachment complete all as specified and directed complete all as specified and directed. Note:- Aluminium grill shall be of Deco grill of approved make as per Design No DG 102, 7.50mm x 6.0mm and weight shall not be less than 3.131Kg/Sqm or approved design.

Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth: for foundation etc or for manholes, laying of pipe in soft / loose soil and getting out complete all as specified

Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & diected

Supply, laying, jointing and testing LT under ground cable XLPE insulated and armoured and PVC sheathed 1100 volts grade, heavy duty with multistranded aluminum conductor of size 50 sqmm 3.5 core laid in trenches/ducts/ along poles/through pipe under road etc with new aluminum lugs complete all as specified and directed

Supply, laying, jointing and testing LT under ground cable XLPE insulated and armoured and PVC sheathed 1100 volts grade, heavy duty with multistranded aluminum conductor of size 25 sqmm 3.5 core laid in trenches/ducts/ along poles/through pipe under road etc with new aluminum lugs complete all as specified and directed

M&L for cutting of Road/hardstanding not less than 30 cm in depth and 30 cm in width underneath the road for passing the cable/pipe and making good with PCC 1:2:4 type B-1 whete road cutting done to make the road surface fair and level complete all as specified and directed by Engr-in Charge.

S&F HDPE of Pressure rating 6kg/cm sq pipe of 40 mm dia including necessary bends,elbows,Tees etc on cable protection complete all as directed.

S&F 80mm bore medium grade steel tubes galvanized with all fitting including cutting threading connection in new or old position for laid in trenches/wall/ceiling/ floor/ , all as specified and directed .

S&F 50mm bore medium grade steel tubes galvanized with all fitting including cutting threading connection in new or old position for laid in trenches/wall/ceiling/ floor/ , all as specified and directed .

S&F 40mm bore medium grade steel tubes galvanized with all fitting including cutting threading connection in new or old position for laid in trenches/wall/ceiling/ floor/ , all as specified and directed .

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity complete all as specified and directed.

Supply and fix submain wiring in repair with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing caping not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing. Note :- (i) Two runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM for payment . (ii) Each submain wiring shall run in seperate PVC casing caping

S&F Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket complete all as specified and directed by Engr in Charge.

S&F DB 08 way Double door SPN type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed.

S & F MCB SPN 32 Amps, 10 KA ratingcomplete all as specified and directed.

S & F MCB SP 06-32 Amps, 10 KA rating complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below groundlevel) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified.

Supply and lay Flexible PVC pipe 20 mm dia heavy duty for drain out condensing water of split AC including cutting of floor / opening of hole in wall and making good after laying of pipe etc match the existing surface complete.

Supply and fix copper tube for AC condense pipe complete all as specified and directed by Engr in Charge.

Supply and fix Elumx LED Bollard 6 Watt including as OEM foundation complete all as specified and directed by Engr in Charge.

Supply and fix 10 sqmm 2 core PVC armoured cable 1100 Volt complete all as specified and directed by Engr in Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Material & Labour for point wiring conforming to IS-732:1989 complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheated copper conductor, 1100 volts grade conforming to IS-694:1990 drawn through and including PVC non-metallic concealed conduit ISI marked with accessories concealed in wall/floor including cutting chases, pining etc with modular metallic ISI marked terminal boxes, concealed in wall (PVC casing caping of suitable size shall be used where ever concealing is not possible) including one FRLS PVC insulated and sheathed multistanded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for the following :-

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 6A switch

(d) One 3 pin socket outlet 6 Amps on independant board.

(e) One 3 pin socket outlet 6 Amps on same board with other switches.

All as per item No. 78 here in before point wiring but for 15 amps socket complete with 2.5 sqmm single core multi stranded FRLS PVC insulated sheated copper conductor 1100 volts grade drawn through and including PVC non - metallic concealed conduit including one FRLS PVC insulated and sheathed multi stranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to comon earth as earth dolly. Note:- (i) PVC Casing caping wiring shall be provided where concealed wiring is not feasible (i.e. concrete surface/ beam/ column/ ceiling etc.) The same shall be deemed to included in the quoted rate. No extra cost shall be paid for the PVC casing caping item. (ii) Separate circuit shall be drawn from MCB. No taping from light circuit. (iii) Modular metal flush box shall be paid separately under relevant items of this schedule.

Supply & Fixing modular switch, 6 Amps , One way, one module , ISI marked complete all as specified and directed.

Supply & Fixing modular switch, 16 Amps , One way, one module , ISI marked complete all as specified and directed.

Supply & Fixing modular socket, 6 Amps, 3 pin, two module, ISI marked complete all as specified and directed.

Supply & Fixing modular socket, 16 Amps , 3 pin combined , two module , ISI marked complete all as specified and directed.

Supply & Fixing Modular white cover plate with Frame 3 Module, ISI marked complete all as specified and directed.

Supply & Fixing Modular white cover plate with Frame 6 Module, ISI marked complete all as specified and directed.

Supply & Fixing Modular metal flush box 3 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.

Supply & Fixing Modular metal flush box 6 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.

Supply and fixing ceiling fans complete with aluminum blades, down rods with safety GI wire connecting up to fan hook, electronic regulator modular type and accessories , 230 volts , 1200 sweep. Min air delivery 245 CFM with service value 8.75 CMM/W with brushles diret current motor 28 W, minimum rated speed 350 RPM, No of speed -5, insulation resistance above 2 mega ohm, No of blade - 03 Nos, TDH below 10%, class B insulation, starting voltage 120 V maximum BIS certified and connecting up including provision of flexible 3 core copper cable complete all as specified and directed.

S&F slim ceiling LED light 2 x 2 feet 36 Watt complete all as specified and directed by Engr in Charge.

Material and Labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes/ modular Cover plate concealed in wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :-

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

Material and Labour for point wiring complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular Cover plate concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to common earth as earth dolly.

Supply and fix Modular white cover plate with Frame 2 Module.

Supply and fix Modular white cover plate with Frame 12 Module.

Supply and fix Modular metal flush box 2 module.

Supply and fix Modular metal flush box 12 module.

Supply and fix Linear Aluminium Baten LED T/L 20W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

S&F MCB SPN 40 Amps 240 Volts-01 No (C Series).

Supply and fixing Recess Mounting LED panel, 2'x2', 36 Watt capacity, white Light, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Armstrong/Grid Ceiling all as specified and directed.

S & F of New bldg security light 45 Watt indus series powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughned glass with lens with IP66 Protection including 40mm dis pipe bracket fixing on wall at any height with 02 nos of MS clamp of suitable size complete all as specified and directed.

Supply,laying,commission & testing XLPE insulated armoured LT cable,1100 Volts grade with aluminium conductor of size 2 core 16 sqmm laid in trenches/through pipe/ducts or fixed on wall etc with suitable size of clamp complete all as specified and directed by engr-in-Charge.

jkconstruction (BID ID -3271593)

P LAXMI AND CO. (BID ID -3266560)

I.J Enterprises (BID ID -3266319)

Shivam Enterprises (BID ID -3271389)

RUPESH CONSTRUCTION CO (BID ID -3271636)

SATGURU ENTERPRISE (BID ID -3271216)

Panther Facilities (BID ID -3266121)

Anil Industrial Corporation (BID ID -3266158)

Unitech Enterprises (BID ID -3266258)