Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹48.1 LAccepted-AOC 8 171 VANDIDHATAM KAMALAPURAM POST OMALUR TK SALEM 636309 | SALEM | SALEM | TAMIL NADU | 636309 | 1 | Accepted-AOC Lowest Bid | |
| 2 | 2₹49.4 L+₹1.4 L (2.82%)Rejected-Finance | 2 | Rejected-Finance Highest |
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
18 Aug 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive officer
Omalur town panchayat
Improvement to Bus Stand at Ward no.8, Survey.No 79/3 Daily Market in Omalur Town Panchayat.
2023_DTP_358327_1
208/2022/A1
Open Tender
Civil Works
Works
180 days
Omalur town panchayat
class II
2 documents required · 2 mandatory
₹0
₹1.3 L
Yes
Omalur town panchayat
5 Jun 2024
11 Aug 2023
18 Aug 2023
11 Aug 2023
18 Aug 2023
11 Aug 2023
14 Aug 2023
Amount
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 B. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.
Column for Ordinary Soil
Grade Beam
Supply delivery and Filling of Gravel in Layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyance of Gravel at site and all labour charges and all other incidential charges etc., complete as per Standard Specification.
Plain Cement Concrete 1:4:8 Mix (one part cement, four part M sand and Eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.
Column Matt and Grade Beam
Column
Finishing the top of flooring with Granothatic flooring with cement concrete 1:2:4 (one cement, two M- Sand and four aggrigate) using 10 to 12mm stone chips – 25mm tk etc., Complete
Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.
Vibrated Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.(Using Vibrator) TNDSS NO: 30 V, VI (S3), VII-3.
Brick Work in Cement Mortor 1:5 Mix (one cement, five M-sand) using new best II Class Bricks of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.(For 10 M3)
Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.TNDSS No.61,V,VI(S4),III
Plain Cement Concrete 1:2:4 Mix (one Part of cement, two Part of M- Sand and four Part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH
Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 83mm thick (table clauses 5 and 9.14) suitable for bus terminals ,industrial complexes, road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 83mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over Stone dust of 100mm thick (excluding the cost of M- Sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the M- Sand to paver block etc., complete ISI 15658-2006.
Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications. (The Colour and shade of the paint shall be got approved by the departmental officers.) TNDSS No.61,V,VI(S4),III
Painting the new iron works such as steel doors, Windows,Ventilators windows bars,balustrades etc, in all floor with two coats of best approved first quality and colour of synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works ) over one the existing red oxide priming coat in all floors excluding cost of priming coat etc, complete complying with Standard Specification. (The Make, Quality and colour of paint should be got approved by the engineer in charge before use on works) ( TNSS NO or NBC No 61 V VI (54) 3)
Fabricating, Supplying and Errecting the Pre Engineer Steel Building Structure using Galvanised Structural Steel Structure Confirming to Grade 50 with Yield Strength of 345 Mpa Base Plate,sag rods ,Stutts including cleats to receive Z or C Purlins cutting,Drilling holes, Welding,Grinding fixing the Members with Necessary Bolt,Nuts, Anchor Bolts with approved quality of Hosting,Aligning and Plascing the T section in Position as per Design got approved from the deparment. fixing Purlin with Sag rods,supporting tje Purlins from the Beams on both side.The welding Shoud be done with submerged arc welding to full lengt. the rate inclusive of the cost of the painting the members with one coat of Primer of Zinc chromite and Enamel paint etc Complete complying with standard specifications
Supply and fixing of Galvalum sheet 6 mm thick ( Pre Painted ) including 15cm lapping roofing with necessary 'J' bolt and nut, bitumen washer and Screws if wooden baterns including cost and conveyance of all materials and all labour charges etc Complete complying with Standard specifications.
Supplying laying and jointing 110 mm dia P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.
Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC OPEN light point / Fan point (For Electronic regulator). etc, complete as per standard specifications.SD.No.22
Supply and Fixing of 20 W LED Street Light for Existing EB Empty Pole : Supply and fixing of 20 W LED Street light fitting in the Existing EB Empty Pole system made of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65. Separate compartment for LEDs & electronic driver with CCT of 5700k, PF >0.90 System Efficacy >85 . Operating voltage range of 120V to 270V with surge arrestor minimum of 1 kv. Driver current not less than 700mA, THD< 10%.Lumens package not less 100 LM/w for LED Source. Test certificate from NABL 9National accredited board for Testing & Calibration laboratory) for LM79 report.In house Testing facility to be available for the same.Lamp life not less than 50,000 Hours etc ; complete as per standard specification .3 RM Supply and delivery of 3 core 1.50 sqmm Flexible cable with ISI mark. Supply and Delivery of 25 mm dia "B " Class (L Shape) GI Bracket , Supply and Delivery of 7" x 3" x 4 mm RCC Post Clamp Size 25X3mm thickness with 6 Nos of 5/8 " Full thread 2 " MS Bolt nuts. Labour charges for Fixing of New 20 W LED Lamp fittings complete set and including all necessary items. As directed by departmental officers etc., Complete.
Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box for 5A 3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point.(SD.No.10)
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains.(SD.No.65)
Supply and run of 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 25mm dia GI Pipe(Class B) suitably bent at both ends with necessary angle iron upright and end supports for mains on 7/20 GI bearer wire for Service connection mains.(SD. No.69)
Supply and fixing of 16 Amps DP switch with metal glad of 500V with fuse and nuetral ( side handle) on suitable TW box PWD earthing.(SD. No.141)
Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.(SD. No.125)
R.Vasu
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .