8882 PROVN OF GALVALUME SHEET TO CERTAIN SHEDS AT HBTC MARVE UNDER GE NORTH MUMBAI

Amount

Civil Works: Dismantling of Mangalore pattern roofing tiles including battens for tiles, shingles etc, of any size including tilting fillets all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantlings 40sqcm and over in section, in any position as in framed work all as specified and as directed by Engineer-in-Charge.

Material and labour for plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good frame in cement concrete complete all as specified and as directed by Engineer-in-Charge.

Cutting holes in brick walls built in cement mortar or cement lime mortar for inserting angle iron trussess / rafters of depth exceeding one brick but not exceeding two bricks all as specified and as directed by Engineer-in-Charge.

Material and labour for plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregates as in bed block of angle iron swan neck post and coping at security wall with chamfered on edges, finished fair and even including form work all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engr-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets

Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engr-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets

Demolition of false ceiling any type and in any description including cover fillets and snap grid etc complete all as specified and as directed by Engineer-in-Charge

Material and labour for anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm, cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm with 605 x 605 mm grid system with and including 12mm thick gypsum board with all connected accessories suitably placed in false ceiling grid with necessary design in single / double as per manufacturers instruction including taking down existing false ceiling with snap grid etc complete all as specified and as directed by Engineer-in-Charge. Make of Aluminium sections: Hindalco / Jindal / Associated Profile & Aluminium / Indal (Indian Al Coy) Make of Gypsum board :Mangalam Timber Product / Gypsum Board / Jolly Bd, Mumbai / Indian Gypsum product / Armstrong World Industries

Demolition of brick work/stone/PCC block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Material and labour for precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C-1 using 20mm graded stone aggregate, exceeding 10cm in width and set in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 15mm thick in cement mortar 1:6 on other than fair faces of the brick or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

Material and labour for rendering 15mm thick in two coats (10 + 5) with cement mortar 1:4 on fair faces of the brick or concrete surfaces using water proofing compound @ 3% by the weight of cement as per manufacturer instructions in both coats and finished the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge Note :- (i) WPC will be measured & paid separately

Supply only water proofing compound, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Scot No 1 /Parmo/Sepcil/Chemseal

Material and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1.5mm wall care putty on wall complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints

Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of wall primer etc complete all as specified and as directed. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar

Material and labour for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil etc complete all as specified and as directed.

E/M Works: Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., all as specified and as directed.

Material and labour for Point wiring complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area) drawn through and including non metallic rigid PVC casing / capping (ISI marked, not lessthan 20mm wide) and accessories on surface of wall/roof with sunken type pressed steel/welded terminal boxes made out of 1.6mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following: Make of cable :Plaza/Finolex/Anchor/Havells/Nicco/Polycab/RPG Make of casing/capping : Precision / Presto Plast / Supreme / Polycab / Plaza

One light/fan/bell point controlled by one, one way switch

One 3 pin 5 Amps switch socket point on independent board.

One 3 pin 5 Amps socket outlet combination point in the same board with other switches

Supply and fix Switch Piano, flush type, single pole, one way, 6 Amps, 240 volts, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / Havells/crabtree/Leader

Supply and fix Ceiling rose, surface type Bakelite, three terminal 65x32mm, ISI marked complete all as specified and as directed. Make: Anchor / Legrand / Havells/crabtree/Leader

Supply and fix switch socket combination 2 in 1 flush type 5 Amps multipurpose complete all as specified and as directed by Engineer-in-Charge. Make : Anchor/Crabtree/Leader/Legrand/Havells

Supply and fix ceiling fan regulator AC, 230 volts electronic step type complete all as specified and as directed by Engineer-in-Charge. Make : Anchor/Crabtree/Leader/Legrand/Havells

Supply and fix double door, sheet metal enclosure powder coated MCB DB SPN 4 way with 200 Amps rated bus bar, 240 volt, IP 53 protection, flush in walls including making good of disturbed surface to match with existing surface complete all as specified and as directed by Engineer-in-Charge. Make: Larsen & Toubro/ABB/Siemens/Schneider/Havells

Supply and fix MCB SPN, 32 Amps, 240 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make: Larsen & Toubro/ABB/Siemens/Schneider/Havells

Supply and fix MCB SP, 6 to 32 Amps, 240 volts,10 KA complete all as specified and as directed by Engineer-in-Charge. Make: Larsen & Toubro/ABB/Siemens/Schneider/Havells

Supply and fix LED tube light fittings decorative box type, PVC end caps including LED tube rod 20watts, 230 volts all pre wired fixed on walls with all fixing accessories such as 2 Nos of PVC square/round box, screws etc and connecting up three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and as directed by Engineer-in-Charge. Make:- Crompton Greaves Cat Part No DMLN1LT8 -16 and Tube rod : LT8-16 or equivalent in Wipro/CG/Havells/Benlo

Supply and fix LED street light fittings 1 x 45 watts, pressure die cast aluminium housing, heat resistance toughened glass with frame. IP 66 protection, better optics for uniform distribution including LED light with all pre wired and connecting up three core flexible copper conductor cable of size 24/0.20 sqmm fixed on walls with and including 32mm dia medium grade GI pipe approx 1.20m length,and making bend to the required shape, grouted on walls, fixed with suitable clamp, bolt, nut etc complete all as specified and as directed by Engineer-in-Charge. Make:- Crompton Greaves Cat Part No LSTP-45-CDL or equivalent in Wipro/CG/Havells/Benlo

Material and labour for Submain wiring complete with and including 2 runs of 4.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including PVC conduit, medium grade of size 20mm including accessories such as Tees, Elbows, junction box, reducers etc as required and fixed on walls and 4.0 sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Make:Plaza/Finolex/Anchor/Havells/Nicco/Polycab/RPG Note :- (i) Two runs of 4.0 sqmm PVC insulated cable and one run of 4.0 sqmm cable and one run of PVC conduit shall be measured as one unit length.

Material and labour Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to and including galvanised earth lead wire 6 mm dia, 7.5 m long, by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate, and protected by 15 mm bore light grade galvanised iron pipe and connected to control board / panel / equipment complete all as shown in electrical plate No.3 of MES schedule Part I with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavaion and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge.

Vishal Builders

S.N Enterprises

PANKAJ AND BROTHERS

mp construction co

joshua construction