Road safety work on the Sikandrabad Dankaur road Chiti Rajwaha Chauraha in Gautam Buddha Nagar district under the Zero Fatality District scheme for the financial year 2026-27

Providing and applying tack coat with bitumen VG10 using Bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MORT&H Specification 503. Including cost of Bitumen, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and laying dense graded bituminous macadam Grading 2 with higher capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent (VG-30) by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Including cost of Bitumen, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and applying tack coat with bitumen Vg10 using Bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MORT&H Specification 503. Including cost of Bitumen, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and laying dense graded bituminous macadam Grading 1 with higher capacity HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4 per cent (VG-30) by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. Including cost of Bitumen, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and laying bituminous concrete with higher capacity hot mix plant using crushed aggregates of specified grading , premixed with bituminous binder @ 5.4 per cent (VG-30) of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. Including cost of Bitumen, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Supply & Fixing of MS Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. The surface should be conceated so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can be concealed with thermoplastic body. The posts shall have Ian ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steeI Guide Poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 which would ensure to obtainI clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Reflective Raised Pavement Markers (Cat Eye/Road Stud) Supply and fixing of raised pavement marker with Made of Plastic body of RPM/Road Stud shall be moulded from ASA(Acrylic Styrene Acrylonitrite) or HIPS(High-Imoact Polystyrene)or Acryloniitrite Butadien Styrene(ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTMD 4280.The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of thelight entring the lens face. Lenses shall be mouled of methyl methecrylate conforming to ASTMD 788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than13.00sq.cm. the marker height shall not be less than 10mm and shall not exceed 20mm & Width shall not exceed 130mm.The base of the marker shall be flat within 1.3mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. In addition , a two year warranty for satisfactory in field performance of the finished roadmarker shall also be given by the contractor who carries out thework of fixing of reflective road markers. In case the markers are displaced, damaged, get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all suchmarkers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all materials, labour,T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Retro-reflectorised Traffic sign as per IRC-67-2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by themanufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends , letters , numerals and borders etc should be as per MoRTH specification No 801.3.7 . P xi)SI.No. 22.18. Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST. 60 cm Circular with diffinitation plate

80 cm x 60 mm rectangular with diffinitation plate

30x90 cm (Left/Right) Object Hazard