ADDN/ALTN WORK IN MD ACCN OF JCOs/ORs AT NAMKUM POCKET

Amount

Schedule 'A'

Item No. 01 : Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Item No. 02 : Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as specified and directed.

Item No. 03 : Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6,using old size bricks complete all as specified and directed.

Item No. 04 : Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6,using old bricks as retrieved against item No. 2 here-in-before, complete all as specified and directed.

Item No. 05 : M&L rendering 15 mm thick in cement mortar 1:6 on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Item No. 06 : 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

Item No. 07 : 5mm thick cement plastering in cement mortar 1:3 as on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

Item No. 08 : Supply only liquid water proofing compound as per manufacture instruction.

Item No. 09 : M & L preparation of newly plastered surfaces of walls/chajja/lintel and applying two coats of exterior acrylic emulsion paint (Apex or equivalent in berger. johnson paint white or tinted) over a coat of alkali resistant primer complete as specified and directed.

Item No. 10 : Materials & labour for prepration of newely plastered surfacea and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.

Item No. 11 : M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed.

Item No. 12 : M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion complete all as specified and directed.

Item No. 13 : M&L for complete removal of existing surface of walls of any description by washing, rubbing down and applying two coats of acrlic emulsion weather coat paint over a coat of alkali resistant primer, complete all as specified and directed.

Item No. 14 : Preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash incl preparation of old surfacecomplete all as specified.

Item No. 15 : Preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on ceiling surfaces complete all as specified and directed.

Item No. 16 : Preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified.

Item No. 17 : Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore complete all as specified and directed.

Item No. 18 : Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Item No. 19 : Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore complete all as specified and directed.

Item No. 20 : Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Item No. 21 : S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed.

Item No. 22 : Demolition of cement concrete unreinforced in floors, roof and pavings n. exc 15 cm thickness (below or above ground level).

Item No. 23 : Dismantling brick tiles or terracing tiles /roof covering materialsingle layer on roofs complete all as specified and directed.

Item No. 24 : Scarpping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as specified and directed.

Item No. 25 : M&L for 10 mm thick plaster in cement mortor 1:3 laid over roof with integral water proofing admixture @ 200 ml per 50 kgs of cement (after the cement is cured the roof will be testd for water tightness by ponding with water for seven days of any seepage/leakage etc.) Note :- supply only water proofing compound shall be measured and paid separately.

Item No. 26 : M&L Applying membrane on primed surface by press application method with minimum 75 mm longitudinal wise lap and 100 mm over lap on the transverse direction duly sticked using 3 mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished non woven polyester reinforced (wt not less than 150 grams) over applying one coat of bituminous primer @ 0.4 kg per Sqm complete all as specified and directed.

Item No. 27 : M&L for two coats of bituminous based aluminum paint on APP membrane all as specified and directed.

Item No. 28 : M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 for fixing tiles. (Note :- Screed bed shall be mixed with water proofing compound as specified and directed and shall be measured and paid separately)

Item No. 29 : M&L for 20 mm thick machine cut & polished cement concrete tiles factory made with grey cement without pigment of size 250mm x 250 mm laid in neat cement slurry over screed bed and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of Dr Fixit or tile glue or as per manufacturer instructions complete all as specified and directed.

Item No. 30 : PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof kerbs, benches and water troughs etc. including necessary moulding complete all as specified & directed.

Item No. 31 : M&L Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) set in CM 1:6 in window or door cills, lintels,bressumers, steps, quoin blocks (for use with masonry), copings, kneelers, apex stones,, columns, posts, with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match.

Item No. 32 : M & L cement concrete Type B0 1:2:4 in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

Item No. 33 : Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame)

Item No. 34 : Taking down chowkats or frame with shutters (without taking off shutters from the frames) but Exc 1.5 and n. Exc 4 Sqm each

Item No. 35 : Taking down shutters of any description n exc 1.00 Sqm each complete.

Item No. 36 : Taking down shutters of any description exc 1.00 and n . Exc 2 Sqm each complete.

Item No. 37 : Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete.

Item No. 38 : S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

Item No. 39 : S & F Anodised aluminium window and ventilator shutters, side hung type or two or three track type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.if use sliding tack provide all locking arrangement,rubber beading,cleat incl all fitting and fixture complete.

Item No. 40 : S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified.

Item No. 41 : S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane.

Item No. 42 : S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed.

Item No. 43 : S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in repairs.

Item No. 44 : S & F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Item No. 45 : S&F factory made solid PVC Moulded door shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing .

Item No. 46 : M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

Item No. 47 : M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified and directed.

Item No. 48 : Supply & fix second class hard wood 35m thick glazed and skeleton factory made shutter for door open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, size members of shutters as specified in SSR Part-I Sec 8, Clause 8.24 (a) complete all as specified and directed .

Item No. 49 : Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed. Notes: Including 0.9 mm thick decorative laminates type I on surface finish fixed on both of flush shutters)

Item No. 50 : S&F block boards 18/19mm thick gde 2 quality, interior grade, commercial type for cupboard shutter, shelf, etc complete all as specified and directed.

Item No. 51 : S&F 18mm thick plywood grade BWR with 1.5mm decoretive laminates both side type I complete all as specified and directed.

Item No. 52 : M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified and directed.

Item No. 53 : M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified and directed.

Item No. 54 : S&F stainless steel barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.

Item No. 55 : S&F stainless steel barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed.

Item No. 56 : S&F stainless steel handles of extruded section and fixed 150 mm long complete all as specified and directed.

Item No. 57 : S&F 100 mm Stainless steel butt hinges, with stainless steel hinge pin, complete all as specified and directed

Item No. 58 : S & F Magnet catcher with nuts and screw of mild steel bright finish complete all as specified and directed.

Item No. 59 : S & F mild steel Drawer handle projection drop 50 mm to 65 mm on screw plate complete all as specified and directed.

Item No. 60 : S & F Magic Eyes for doors complete all as specified and directed.

Item No. 61 : S&F 300 mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

Item No. 62 : S&F Mild Steel 150mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete all as specified and directed.

Item No. 63 : S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm complete all as specified and directed.

Item No. 64 : S&F stainless steel slip on soft hinges for cabinet door complete all as specified and directed.

Item No. 65 : M&L preparation of new wooden or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying tow coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Item No. 66 : M&L for prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Item No. 67 : M&L for preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted complete all as directed.

Item No. 68 : M&L for preparation of old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted all as directed.

Item No. 69 : S & F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished complete all as specified and directed.

Item No. 70 : Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Item No. 71 : Roughing surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Item No. 72 : M&L brushing neat cement slurry with 3 Kg of cement per sqm . complete all as specified and directed.

Item No. 73 : M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, edgeless , size of each tile 400x400 mm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed.

Item No. 74 : All as per Item No 73 but as in Skirting with 10mm thick rendering in CM 1:3 complete all as specified and directed.

Item No. 75 : M&L for 9-10mm thick Light coloured doubly charged vitrified ceramic tiles of size in floors, 600 x 600 mm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4 complete all as specified & directed.

Item No. 76 : All as per Item No 75 but as in Skirting with 10mm thick rendering in CM 1:3 complete all as specified and directed.

Item No. 77 : M&L for 450x300x7mm thick glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4, Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed.

Item No. 78 : M&L for 16-18 mm thick granite (of any type), as in cooking plateform etc set in CM 1:4 and grinding and polishing and rounding / moulding the edges complete all as specified and directed.

Item No. 79 : M & L for Machine cut Kota Stone slab flooring 18-20 mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing and nosing complete all as specified and directed.

Item No. 80 : M & L for Machine cut Kota Stone slab 18-20 mm thick in riser of step,skriting,dado,and pillar and jointed with gray cement slurry mixed with pigment to shade os slab incl rubbing and polishing and rounding to edge of stone slab complete all as specified and directed.

Item No. 81 : Rounding to edges of stone slabs on edge such as in steps,coocking plateform and other similar situations complete all as specified and directed.

Item No. 82 : Disconnecting existing tanks setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position complete all as directed.

Item No. 83 : Dismantling water tanks capacity exc 250 ltrs & n exc 500 ltrs and removing from site complete all as specified and directed.

Item No. 84 : Dismantling water tanks capacity exc 500 ltrs & n exc 1000 ltrs and removing from site complete all as specified and directed.

Item No. 85 : Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for

Item No. 86 : Supply and fixing three layer PVC tank of 500 ltr capacity including Supplied and fixed 20mm dia brass float valve assembly complete all as specified and directed.

Item No. 87 : Rotational moulded polythene water storage tanks, three layered (Cylindrical vertical with closed top) of capacity 1000 lit, hoisted and fixed in position as in repair complete all as specified.

Item No. 88 : S& F Ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs, complete all as specified and directed.

Item No. 89 : M & L for repairing broken edges of chajja's, roof projection, Fascias etc . In small widths/depths ( exposed area exc 0.05 sqm but n exc 0.10 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately)

Item No. 90 : All as per ser item No 89 above herein before but exposed area exc 0.10 Sqm but not exc 0.16 Sqm complete all as specified and directed.

Item No. 91 : M&L for repair and rendering 10mm thick in cm 1 :3 on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed .

Item No. 92 : Mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required, incl cranking bending spirally for hooping for columns and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Item No. 93 : M&L for mild steel 6 - 8mm dia TMT bars bent to shape required, including cranking, bending and binding with mild steel annealed wire not less than 0.9mm dia complete all as specified and directed.

Item No. 94 : S&F of white/colour PVC Cabinet Mirror of Size 350 mm X450 mm of approved make complete all as specified and directed.

Item No. 95 : S & F Viterous china wash basin, white, flat back, of size 550x400mm with CP waste coupling, and PVC waste pipe and including fixing brackets, complete fixed as in repairs suitable for pipe of bore 15mm.

Item No. 96 : Supplied and fixed vitreous china Wash hand basin white flat back size 630x450mm including Supplied and fixed angle iron brackets, waste coupling exclusive fixing of waste pipe complete all as specified & directed.

Item No. 97 : S&F PVC waste pipe 32 mm dia and 900 mm long for WHB and Kitchen sink complete all as specified and directed.

Item No. 98 : S & F Brass chromium plated tubular towel rail, 20mm dia, D Type, and 600mm long with brackets fixed complete with brass chromium plated screws complete all as specified and directed.

Item No. 99 : S&F in repair Towel Rail chromium plated D type of 20 mm dia, 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats incl brackets complete all as specified and directed.

Item No. 100 : S & F Brass CP Soap Dish 150x150mm size fixed to wall with plugs and brass chromium plated screws complete all as specified and directed.

Item No. 101 : S&F in repair Soap dish, chromium plated with fittings complete all as specified & directed.

Item No. 102 : Brass CP toilet paper holder fixed to wall with plugs and brass chromium plated screws complete all as specified and directed.

Item No. 103 : S & F in repair Chromium plated mixture cock for wash hand basin for hot and cold water of copper alloy with long shank inlets suitable for 15mm bore connections complete all as specified and directed.

Item No. 104 : S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

Item No. 105 : S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 750 x 600 x 250 mm size fixing with wooden plug with suitable size of screws complete all as specified.

Item No. 106 : S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass ferrule and fixed

Item No. 107 : S & F 15 mm bore chromium plated nozzel for RO connection complete

Item No. 108 : Supply and fixing in repairs Brass CP mixer for basin mixing for hot and cold water screwed down for iron pipe of 15 mm bore, complete all as specified and directed

Item No. 109 : S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap& incl sheet cover of white colour all as directed and specified.

Item No. 110 : S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete.

Item No. 111 : S & F in repair chromium plated health faucet for EWC all as specified and directed by EIC .

Item No. 112 : Supply and fixing in repair PVC valveless syphonic action low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc. complete all as specified and directed.

Item No. 113 : Stain less steel sink with drainage board made out of 1 mm thick stainless steel sheet 1 mm thick, kitchen type, with plug,washer and waste, incl fixing with cantilver brackets and connecting union to pipe over all size 915x460mm, bowl size 410x 330 x 160mm. all as specified.

Item No. 114 : S&F in repairs shower rose brass cromium plated with swivel joints of size 75 mm dia cast copper alloy CP, fancy type with CP neck 6" long made to shape comptete.

Item No. 115 : Mild steel Powder coated pipes 32 mm dia with wall thickness 16 gauge, with fixing brackets stops, roller etc. in curtain rods fixed in repairs complete all as specified and directed.

Item No. 116 : S&F end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia complete

Item No. 117 : 450 mm long PVC connection with brass check nuts for 15mm bore pipes of aproved quality

Item No. 118 : S&F PVC in repar connection 15mm dia 600mm long with PTMT nut.

Item No. 119 : S&F in repairs 15mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions.

Item No. 120 : S & F Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed in repair complete all as specified

Item No. 121 : Hard core of broken bricks of gauge n exc 63mm, deposited, spread, leveled in layers n exc 15cm thick each layer including watering and well ramming to a true surface.

Item No. 122 : 75mm thick, PCC 1:3:6, type C-1 using 20 mm graded stone aggregate, as in plinth protection finished even & smooth without using extra cement complete all as specified and directed .

Item No. 123 : Demolition of cement concrete of any description and in any position and removing the rubbish from the work site.

Item No. 124 : Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(IWPC will be paid separately)

Item No. 125 : PCC 1:7:12 type using 40 to 60 mm thick brick aggregate as in filling of sunken portion completed all as specified.

Item No. 126 : 25mm thick PCC 1:2:4 type B0 using12.5 mm graded stone aggregate as in sunken floor complete as specified and directed.

Item No. 127 : M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate with WPC as in sunken portion and making adequate slope toward spout pipe complete all as specified and as directed. NOTE: - Water Proofing Compound shall be measured and paid separately

Item No. 128 : M&L for rendering 15 mm thick on concrete or brick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement.Note - WPC will be measured and paid separtely

Item No. 129 : M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat (one coat over plaster and one coat on polythene film) including cleaning of surface over polythene film complete all as specified and as directed

Item No. 130 : M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed.

Item No. 131 : M&L for PCC (1:5:10) Type E-2 using 40mm graded brick aggregate as in sunken portion complete all as specified and directed.

Item No. 132 : S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia

Item No. 133 : S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 75 mm dia

Item No. 134 : S&F PVC (SWR) bends/shoes any radius of 110mm dia

Item No. 135 : S&F PVC (SWR) bends any radius provided with access door of 110mm dia

Item No. 136 : S&F PVC (SWR) bends any radius provided with access door of 75 mm dia

Item No. 137 : S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 110mm bore with access door

Item No. 138 : M&L PVC(SWR) Tee of radius 110mm dia.

Item No. 139 : S & F PVC(SWR) vent cowel of 110mm dia.

Item No. 140 : S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 75 mm bore with access door

Item No. 141 : S&F PVC (SWR) vent cowl of 75mm dia

Item No. 142 : S&F 75 mm bore PVC floor trap with 75mm dia grating including jointing to waste pipe, all as specified

Item No. 143 : Taking down eaves, gutters and rain water pipes (any sizes or pattern) incl all fitting incl cleaning for refixing or removing to store yard.

Item No. 144 : blank

Item No. 145 : blank

Item No. 146 : M&L PVC (SWR) bend of radius 75mm dia.

Item No. 147 : S & F in repair Brass chromium plated wall mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality all as specified and directed.

Item No. 148 : M&L in repair for salt galzed stone wate gully traps size 150 x150mm square type 'P' including setting and jointing to drains with CM 1:1 and CI grating including demolition of exisiting traps complete all as specified and directed.

Item No. 149 : S&F in repair waste coupling of PTMT (half or full threaded) for 32mm dia complete all as specified and directed.

Item No. 150 : S&F in repair PTMT grating doom 100mm dia.

Item No. 151 : Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors

Item No. 153 : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

Item No. 154 : At points of contact of wood work by chemical emulsion (in oil or kerosene based solution)@ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same

Item No. 155 : Cleaning of vegetation from RCC/brick work /plaster work including taking and roots etc and making good with cement plaster (plastering will be measureed &paid separate under respective ites.

Item No. 156 : M& L door seal of size 18mmx6mm suitable for filling gap below the door made from self adhesive rubber complete all as specified and directed.

Item No. 157 : S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws as specified.

Item No. 158 : S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,etc with self tapping screws or J hooks as specified.

Item No. 159 : M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc complete all as spd & directed.

Item No. 160 : M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.

Item No. 161 : M&L Machine pressed precast concrete coloured Inter locking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over sand cushion & laid over sub base all as specified and directed.

Item No. 162 : M & L Sand filling under floors including watering and consolidation

External Electrical Supply

Item No. 163 : Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed.

Item No. 164 : M&L XLPE 4 core 16 sqmm insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 Volts grade, in trenches/fixed on wall complete all as specified and as directed. Notes:- (i) Quoted rate shall include the cost of lugs of proper size and cable glands. (ii) Excavation, earthwork, PCC cover and sand cushioning shall be measured and paid seprately.

Item No. 165 : Description all as per item No 164 here in before but using 4 core 25 sqmm

Item No. 166 : Excavation in trenches not exceeding 1.5 mtr deep and 1.5 mtr width as in soft/loose soil complete all as specified and as directed.

Item No. 167 : Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Item No. 168 : Removal of excavated soil to a distance n.exc 50 m and deposited where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

Item No. 169 : M&L for sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm deep over the cable complete all as specified and as directed. Note:- Punned thickness shall be taken for measurement.

Item No. 170 : M & L for laying bricks, common burnt clay building sub-class 'B' old size bricks for protection of cable in trenches complete all as specified and as directed.

Item No. 171 : S & F GI tubing medium grade of size 40 mm dia fixed on walls / laid in trenches as protection pipe for under ground cable including provisioning of specials and clamps etc complete all as specified and as directed.

Internal Electrification

Item No. 172 : Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Item No. 173 : Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Item No. 174 : Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Item No. 175 : Taking down ceiling fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Namkum complete all as specified and as directed.

Item No. 176 : Taking down of geyser after disconnecting the electric supply, disconnecting the water pipe (cold and hot water) from the geyser of any make and any capacity, by unscrewing nuts, bolts & washer from its existing place, cleaning geysers tank body properly. and re-fixing the geyser at its original place by screwing nuts, bolts & washer, connecting the water pipe (hot and cold water) and the electric supply including testing of geyser for proper working to the entire satisfaction, all as specified and as directed by Engr-in-charge

Item No. 177 : M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed rigid non metallic PVC conduit medium grade of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 Amps

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(f) One bell point controlled by one, bell switch 5 Amps

Item No. 178 : Description all as per item No 177 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No. 179 : S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 180 : S & F for Switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 181 : S&F switch socket combination 2 in 1, 3 pin, 5/15 amp multipurpose, flush type universal, all as specified and as directed

Item No. 182 : S & F for switch bell push piano type 5 amp, 230 Volts Complete all as specified and directed at site.

Item No. 183 : S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 184 : Supply and fixing ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified.

Item No. 185 : S & F for stepped type electronic fan regulator flushType complete all as specified and directed at site.

Item No. 186 : S & F for lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

Item No. 187 : S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Item No. 188 : M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit

Item No. 189 : S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 190 : S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 191 : S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 192 : Labour only for refixing the celing fan obtained from item No 175 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

Item No. 193 : S & F for Highly efficient LED rechargeable LED bulb cool day light 9/10 watts having luminous efficacy range lies between (> 100 and < 105) lm/W, CRI 80 as per BEE guidelines long life 20000 to 25000 hrs, colour temp 6500 K, frosted glass min back up time 4 hrs after charge, In-built surge protection off 3kVa, LED Chip and Driver shall be of same make complete all as specified and directed. Note: Contractor has to fix screen print self adhesive sticker contains the information CA no, name of contractor and date of completion without any extra cost.

Item No. 194 : S & F for LED 10 watts fitting luminous efficacy not less than 120 lumen/watt, natural white, power factor greater than 0.95, IP 20, color temp 6500 K (cool white), CRI 80, life span 20000 to 25000 hours, LED Chip, Driver & Housing shall be of same make In-built surge protection of 3 KVA aluminium extruded with decorative end caps complete all as specified and as directed.Note: Contractor has to fix screen print self adhesive sticker contains the information CA no, name of contractor and date of completion without any extra cost.

Item No. 195 : S & F for Energy saving new generation 10 watt LED bulk head, luminous efficacy not less than 110 lumen/watt, natural white, power factor greater than 0.95, IP 20, color temp 6500 K (Cool white), CRI 80, 20000 to 25000 hours life span, In-built surge protection of 3 KVA, LED Chip, Driver & Housing shall be of same make fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed.Note: Contractor has to fix screen print self adhesive sticker contains the information CA no, name of contractor and date of completion without any extra cost.

Item No. 196 : S & F for wall mounted LED tube light fitting 20 watt, luminous efficacy not less than 120 lumen/watt, natural white, power factor greater than 0.95, IP 20, color temp 6500 K (cool white), CRI 80, 20000 to 25000 hours life span, In-built surge protection of 4 KVA, LED Chip, Driver & Housing shall be of same make batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Note: Contractor has to fix screen print self adhesive sticker contains the information CA no, name of contractor and date of completion without any extra cost.

Item No. 197 : S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watt luminous efficacy not less than 120 lumen/watt, natural white, power factor greater than 0.95, Color Temp 6500K(Cool White), 20000 to 25000 hours CRI 80, In-built surge protection Device of 5 kVa, LED Chip, Driver & Housing shall be of same make with pre wired, warrenty option of 5 years from date of installation and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Note: Contractor has to fix screen print self adhesive sticker contains the information CA no, name of contractor and date of completion without any extra cost.

Item No. 198 : S & F ceiling fans complete with blades, down rods, electronic regulator accessories, 230 v , 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushleess direct current motor (BLDC).Note: Contractor has to fix screen print self adhesive sticker contains the information CA no, name of contractor and date of completion without any extra cost.

Item No. 199 : S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base and making good finish after installation compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).Note: Contractor has to fix screen print self adhesive sticker contains the information CA no, name of contractor and date of completion without any extra cost.

Item No. 200 : M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Item No. 201 : Supply, installation, testing and commissioning of factory made meter panel board wall mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of Acriylic sheet for meter reading, space for refixing of single phase KWH meter 5-60 Amps -4 Nos AC 230 Volts incl lugs, spacer mounting chanels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc, suitable compartment of every meter and control MCB circuit and epoxy powder coated spray paint with primer, CPRI type tested complete all as directed including the following accessories:- Incoming (a) MCCB 63 amps 04 pole ,415 Volts, 10 KA - 01 No (b) R-Y-B phase LED indicating lamp-03 Nos (c) Copper wiring in panel of suitable size (d) 200 Amps TPN copper busbar Out going (a) MCB 40 amps SPN, 230 Volts, 10 KA - 4 Nos (b) MCB SPN 10Amps ,230Volts, 10KA-01 No (c) taking down and Re-fixing existing electric meter - 4 Nos (Note: taking down electric meter and keep safe costody and refixing to same and to be insured properly maching the qtr Nos before fixing the electric meter)

Item No. 202: M& L for 450 x 300 x 7 mm thick mat finish ceramic coloured tiles suitable for external vertica surfaces chajja/ balcony/ parapet set & joined in neat cement slurry and pointed in coloured cement over and including 10 mm thick cement mortar 1:4 (the rate of scaffolding etc should be included in the quoted rate)

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 945327.00 (Minus) inserted by the MES.

Rasam Engg Co. (BID ID -3258064)

Shivam Engineers and Contracts (BID ID -3262921)

Vp sanjiv (BID ID -3258523)

M/S SANJAY KUMAR YADAV (BID ID -3262488)

United Sales Corporation (BID ID -3257793)

NIRMAL SALES CORPORATION (BID ID -3258536)

Nand Lal and Sons (BID ID -3261579)