SPECIAL REPAIRS TO DIVING BD CONNECTED STRUCTURE OF SWIMMING POOL OF 1 EME CENTRE UNDER GE N SECUNDERABAD

Amount

M&L for removal of loose and disintegrated concrete of RCC structural members viz slab, beam column,slabs ,chajjas and lintel etc by low impact hammer including removal of debris outside MD land, cleaning the surface by high pressure water jet or by air blast and exposed reinforcement bars with wire brush and apply two coats of anti-rust protective chemical at suitable intervals all as per manufacture's instruction to resist further deterioration of re-inforcement bar including use and waste form work providing welded wire mesh of size 50 x 50 mm of wire 3mm dia and using spray gun presure guniting in CM 1:3, 30mm thick finishing guniting surface in cement mortar 1:3, 10mm including using water proofing compound 2% by weight of cement and finishing even and smooth without using extra cement to match the existing surface and Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works and necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out guniting shall be made by the contractor complete all as specified and as directed.

M&L for removal of loose and disintegrated concrete of RCC structural members viz slab, floors, beams, staircase, landing, chajjas and similar suspended work incl exposing reinforcement bars by low impact hammer including removal of debris outside MD land and Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work etc complete all as specified and directed.

M & L for drilling holes on existing RCC walls of dia 14mm and length of 100 mm to insert 12mm dia bars with lock set chemicals bonding agent Fosroc Nitobond EP as approved by engineer in charge etc complete all as specified and as directed.

M & L for Preparing corroded reinforcement steel by exposing around its full circumference and cleaned to remove all loose scale and corrosion deposits to a bright condition by applying one coat of Reebaklens RR (rust remover). The applied surface is to be cleaned after 24hrs with wire brush. After cleaning the re-inforcement bars, it shall be painted with one or more coats of anti-corrosive coating Nitozinc primer evenly. In case the existing rebars have undergone considerable loss in diameter, addtional re-inforcement of similar diameter bars shall be provided and connected to the core RCC through proper shear connectors with Lokfix, anchoring grout complete all as specified and as directed. Note : Addition of re-inforcement bar shall be measured and paid seperately. unit measurment qty Per Sqm area of concerete surface and Work should be done using the products mentioned above or equivalent products of manufaturer M/s FOSROC/ equivalent make as approved by GE)

M & L for Providing Renderoc S2, A Structural grade polymer modified reinstatement, hand applied repair mortar over the epoxy bonding agent . The mortar can be applied from a minimum thickness of 5mm to 25mm thickness in vertical surface, thicker section can be built up in layers the structural grade repair mortar shall have a minimum characteristic compressive strength of 45 Mpa at 28 days and curing shall be done to the applied surface with concure WB curing compound or by normal curing practice Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work etc complete all as specified and as directed.

S&F pre-fabricated FRP diving board of standard size (4.80X0.50 Mtr) with standard specifications,and including necessary fixing high quality stainless steel (Grade 304) fitting of fulcrum , hinge sets, adjustable fittings with necessary accessories etc and lifting by crane and fixing at stages all as per manufacturers instruction and Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work etc complete all as specified and as directed. Make: M/s Siloam (Pools & Water Solutions) / M/s Potent Water care Pvt Ltd/M/s INDIANA SPORTS as approved by GE.

S&Fof 500X500X400mm pre-fabricated FRP Premium 400mm Podium Pool starting block these find their application mainly in pool competitions and diving. The base of startind block is made up of high quality stainless steel (Grade 304) and top sheet made of FRP and has smooth finish . it include a backstroke handle in heights of 400mm in accordance with the international Fina Standards with necessary accessories etc and etc complete all as specified and as directed. Make: M/s Siloam (Pools & Water Solutions) / M/s Potent Water care Pvt Ltd/M/s INDIANA SPORTS as approved by GE.

Demolition of RCC of any description and in any position not otherwise specifically provided reinforced (reinforcement of cut as required to facilasite demolition etc) and removal of rubbish/ demolished materials out of MD land complete all as specified and as directed.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in steps, Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete any section straight or winding, but excluding landings complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams,Staircase beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. of flat surfaces complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

All as per item No. 11 but mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc., complete all as specified and as directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for (un-reinforcement) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 ( using 20mm graded stone aggregate) providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and and as directed

S&F Rolled Mild steel in joist, channel, angle or tee sections, fixed independently without connecting plates, etc., (cut to ordinary lenghts i.e within 20mm of the length indicated) of Fe 410-W ( Gde-E-250) quality A and including necessary precautionary measures as in supports etc complete all as specified and as directed.

S&F Rolled Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240. including necessary scaffolding and fixing arrangements etc complete all as specified and as directed. Note: The rate shall include necessary support system while installing girder considering safety of existing structure.

S&F Rolled Mild Steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc.Roof strusses (framed) and connecting plates, Fe 410-W ( Gde-E-250) quality A etc., including necessary precautionary measures as in supports etc., complete all as specified and as directed.

S&F Mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not exc 30cm long and dia of neck exc 20mm and n exc 25mm complete all as specified and as directed.

M&L for painting on new steel surfaces including preparation and treating with two coats of aluminium paint over a coat of primer aluminium red oxide exceeding 10cm width or girth etc complete all as specified and as directed.

M&L for painting on old steel surfaces including preparation and treating with two coats of aluminium paint exceeding 10cm width or girth etc complete all as specified and as directed.

M & L for preparation of old painted surfaces of steel and applying two coats of synthetic enamel paint on steel surfaces over 10 cm width or girth etc complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (whereever required) and fitting the same with necessarystainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Dismantling floor hearth including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for Providing and fixing of coloured glass mosaic blue tiles of size 20mmx20mmx4mm as in swimming pool flooring matt surface finish as approved for swimming pool including adhesives, chemicals and grouting of Laticrete or equivalent in Pidilite/Ferrous crete as per manufacturers instructions etc., complete all as specified and as directed.

M & L Providing and fixing of coloured glass mosaic blue tiles of size 20mmx20mmx4mm as in swimming pool dado / wall as approved for swimming pooll including adhesives, chemicals and grouting of Laticrete or equivalent in Pidilite/Ferrous crete as per manufacturers instructions etc., complete all as specified and as directed.

Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc., complete all as specified and as directed.

Material and labour for rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick in two coats, 10 mm thick in cement plaster 1:6 and 5 mm thick in cement plaster 1:4 mixed with integral water proofing compound as per manufacturers instructions, on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid seperately.

Supply only integral water proofing compound complete all as specified and as directed.

S&F in repair 12 mm thick toughened glass door engraved with logo with all patch fittings such as Ozone Opf-2(Top patch), Opf-3 (Bottom Patch), OPL-1 (corner patch lock with strike plate), OFS-ACC-GDP ( Top pivot for patch fitting door), OGH-55 (32 x 130033) PSS Finish H-type Handle including floor door spring, pivot, cutouts,holes etc complete all as specified and as directed. Note: Rate shall be inclusive of Engraving logo, The contractor shall visit site bfore quoting and access exact requirement. No claim what-so-ever shall be entertained on this account.For additional details, if any , contractors are advised to visit AGE B/R (N) No I of GE north secunderabad.

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar etc and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L for designer rubber moulded chequerred cement concrete / mosaic tiles with mixture of grey and white cemetn in equal porportions with pigments of size 300 x 300 x 22mm or 250 x 250 x 22mm or 200 x 200 x 22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layier in CM 1:6, 15mm thick for laying floor finishes etc complete all as specified and as directed.

Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and including removal of rubbish/ demolished materials outside of MD land complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection , at 3 metre interval and every change of direction duly filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed.

M&L for 20 to 25mm thick machine cut and machine polished cudappah stone slab for platform jointed and set in CM 1:3 and fixed including rounding to edge of stone slabs one side edge etc complete all as specified and as directed.

M&L for machine cut 20mm thick Granite (of any type and size) machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete with admixture of pigment to match with shade of granite and including10mm thick backing plaster in CM 1:4 etc.complete all as specified and as directed.

Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Material and labour for preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed

M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying two coats of white wash all complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over priming coat on walls etc., complete all as specified and as directed.

M & L for preparing old decorative surfaces of walls, by washing, rubbing down, stopping and applying two coat of cement base paint of any colour complete all as specified and as directed.

M & L for Providing and fixing of glazed coloured ceramic tiles of size 100mmx100mm upto 300mm x 300mm x 6 to 7mm as in swimming pool flooring matt surface finish as approved for swimming pool including adhesives, chemicals and grouting of Laticrete or equivalent in Pidilite/Ferrous crete as per manufacturer's instructions etc., complete all as specified and as directed.

M & L for Providing and fixing of glazed coloured ceramic tiles of size 100mmx100mm upto 300mm x 300mm x 6 to 7mm as in swimming pool Dado/Wall as approved for swimming pool including adhesives, chemicals and grouting of Laticrete or equivalent in Pidilite/Ferrous crete as per manufacturer's instructions etc., complete all as specified and as directed.

SKY CONSTRUCTIONS

M/s GM Constructions