Repair of Toilets or Washrooms including Sanitary Fitting inside Factory at OEFC

Amount

Demolition & dismantling of brick work built in cement mortar.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4. Cement Make: Ultratech/Ambuja/ACC/ Birla.

Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering 15mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces of wall, after brushing neat cement slurry with 3.0kg of cement per sqm , finished even and smooth (without using extra cement) Cement Make: Ultratech/Ambuja/ACC/ Birla.

M&L Rendering 15mm thick cement plaster 1:4 on fair faces of brick work or concrete surfaces of Ceiling, after brushing neat cement slurry with 3.0kg of cement per sqm , finished even and smooth (without using extra cement). Cement Make: Ultratech/Ambuja/ACC/ Birla.

M&L 3mm thick wall care putty on wall. Make - JK/Birla/Asian/Burger

M&L Priming plastered and other surfaces with alkali resistant priming paint on wall. Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon.

M&L Preparing new or previously untreated wall surfaces and apply two coat of distemper oil emulsion. Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon.

M&L Preparing new or previously untreated wall surfaces and apply two coat of Cement Paint over one coat of primer. Make:-Snowcem/Asian, Adarsh/ Gillden/Amar/Sunshine/Indigo etc.

M&L Preparing old painted wall surfaces and apply two coat of Cement Paint. Make:-Snowcem/Asian, Adarsh/ Gillden/Amar/Sunshine/Indigo etc.

M&L 3mm thick wall care putty on ceiling. Make - JK/Birla/Asian/Burger

M&L Priming plastered and other surfaces with alkali resistant priming paint on ceiling. Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon.

M&L Preparing new or previously untreated ceiling surfaces & apply two coat of distemper oil emulsion. Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon.

M&L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Make:-Berger/ Nerolac/ Shalimar/Asian.

M&L prepairing old steel surfaces and applying two coats synthetic enamel paints. Make:-Berger/ Nerolac/ Shalimar/Asian/Nippon.

Demolition and dismantling of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L 40mm thick Cement Concrete Type B-0, 1:2:4 (12.5 mm graded aggregate) after brushing neat cement slurry with 3.0kg of cement per sqm and finishing surface even and smooth without using extra cement. Cement Make: Ultratech/Ambuja/ACC/ Birla.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with cement plaster 1:4. Cement Make: Ultratech/Ambuja/ACC/ Birla.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Make: Kajaria/Somany/Jahnson.

M&L of Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tile. Make: Kajaria/Somany/Jahnson.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth.

Cutting hole in brick wall built in cement mortar n exc 150 sq.cm and making good dismantelled portion with cement mortar 1:3 or Cement concrete 1:2:4, type B-1 as required.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store.

S&F 15mm GI medium grade tube with all fitings. Make:Jindal/TATA/Hindustan.

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store.

S&F 20mm GI medium grade tube with all fitings. Make:Jindal/TATA/Hindustan.

S&F 15 mm bore dia Stop Cock ( minimum weight 90 gms), standard of PTMT any colour high pressure screwed for iron pipe. Make:Supreme/Century/Prayag.

S&F 20 mm bore dia Stop Cock ( minimum weight 92 gms), standard of PTMT any colour high pressure screwed for iron pipe. Make:Supreme/Century/Prayag.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests and including connection to trap,and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor with including trap set in and including concrete. Make:Hindware/Parryware/Jaquar/Cera.

S&F White Vitreous China wash down water closet pan (pedestal pattern) including connection to drain pipe, fixing plastic water closet seat and flushing system, antisyphonage pipe, etc. complete including making good to floor with concrete etc. Make:Hindware/Parryware/Jaquar/Cera.

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device Make:Hindware/Parryware/Jaquar/Cera.

S&F 10 Litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, including flush pipe of polythelene of low or high density or PVC 32mm, for low level cistern. Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag.

Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern. Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag.

Fixing of Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.

S&F Vitreous China wash basin, white, flat back, size 630x450mm including brackets, cutting for and pinning in ends of brackets or erecting stand. Make:Hindware/Parryware/Jaquar/Cera.

S&F 15mm Pillar tap of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag.

S&F PVC connections 15mm size with PTMT nuts of length 450mm. Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag.

S&F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including waste pipe. Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms).

S&F Vitreous china urinal partition white of size310x700 mm, about 40cm above floor line.

S&F Vitreous china urinal partition white of size310x700 mm, about 40cm above floor line, fixed in repairs.

Tking down old Vitreous China urinals, bowl type (back or corner wall type) and fittings and carriage to store or for safe custody..

S&F Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. Make:Hindware/Parryware/Jaquar/Cera.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag.

S&F Waste coupling of PTMT (half or full threaded) for urinals (Minimum weight 32mm-45gms) including waste pipe.

S&F 15 mm Bib Tap, standard of PTMT any colour high pressure screwed for 15 mm bore dia of iron pipe, fix in repair. Make:Hindware/Parryware/Jaquar/Cera/Supreme/Prayag.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. Make: Rajshri/Sintex/Globe.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Make: Rajshri/Sintex/Globe.

S&F 150mm Aluminium anodised, barrel tower bolts of extruded section.

S&F 200mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.

S&F 125mm Aluminium handle, cast type, anodised.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21

Taking down old shutter with frame area exc 1.5 sqm but n exc 4 sqm each and removing to store.

Cutting holes in brick walls in cement mortar N exc Half Brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.

S&F 3 mm sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples.

S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members.

Removing building materials etc. to a distance of 1 Km including loading and unloading.

PAPPU BUILDERS

KAMAL TRADING COMPANY

CHHOTOO BUILDERS

M/S M. L. CHATURVEDI & SONS