Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹3.0 L+₹14,366 (5.11%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹3.0 L+₹24,066 (8.57%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | A K ELECTRICAL L1 | GK electrical Engg. works L3 | PARVEEN ENGINEERING WORKS L2 |
|---|---|---|---|---|---|---|
| 1.00 | Retrofitting of foundation of Pump set and other allied works by way of: INSTALLATION of existing Pump set 10000 GPH X 220M- Foundation Blocks (01 No):Construction of R.C.C. foundation block – 01 No of required size as per base frame of pump set inside the pump room for installation of pumping unit by demolishing the existing damaged foundation block of requisite area with jack hammer, high carbon steel chisel and sledge hammer, excavation of soil to finish with required dimensions of the pit, removal of demolished/excavated material and disposing off the same outside the pump room at a suitable place as per site conditions.The job then includes providing and laying a layer of crushed stones 40 mm and ramming properly. Laying of one layer of 1:3:6 concrete mass 30 mm thick. Fabrication & Providing of steel foundation bolts of required dia. 600 mm in length – 6 Nos. having threaded portion at one end and anchor at the other end. Also providing fabrication of steel hexagonal nuts and washers for the foundation bolts.Fabrication of steel reinforced cuboidal structure of requisite size for the foundation block out of T.M.T. steel bars 10 mm thick by way of cutting, the steel bars of required length and placing in position at proper spacing longitudinally and transversely binding with black annealed wire to make required cube meshes of 6 size are formed. The job includes fabrication charges as well as hire charges of welding set. Lowering the reinforced/cuboidal steel structure in the pit and then placing the base frame of the pump over the steel reinforced cuboidal steel structure making proper leveling and alignment of the base frame over the cuboidal steel structure.Placing the threaded end of the foundation bolts in upright vertical position at required distance in position and in alignment after lowering through holes of base frame. Binding of the foundation bolts with the steel mesh of cuboidal steel reinforced structure at various spots and then fastening the base frame over the reinforced steel structure by tightening the nuts of the foundation bolts, simultaneously ensuring proper leveling and alignment of the base frame over the reinforced cuboidal steel structure.The job further includes laying of M-20 grade cement concrete block including steel reinforcement, machine mixing laying and compaction with vibrator using stone aggregate 1:11/2:3 mix (1 cement 11/2 coarse sand and 3 graded stone mixture of specified grade of nominal size 20mm) including binding chemical up to top level from inside the base frame and up to the bottom line of base frame from outside of the base block, also plastering the exposed surface of block.Construction of drain for draining out the occasional leakage water of pump. Also repairing of damaged flooring where required with cement concrete mixture using chemical bonding material for smooth finish of the flooring of the pump room, and proper curing of cement works for proper strength for a minimum of 07 days. The whole job also includes cost of material and carriage charges for all material from various sources by Meech. Transport as well as head load, hire charges of shuttering material, vibrator and concrete mixture and welding set, POL for vibrator and concrete mixture, labour charges for laying of foundation block, including skilled and semi-skilled workers deployed for execution of job.Installation (01 Nos.): Installation of existing 10000 GPH X 220M Head H.C. pump set on the set foundation block at the pump room by way of providing and fitting of bolts with nuts and washers for fitting of motor and pump on the base frame, as well as leveling of pump and motor in proper alignment with each other. Tightening the nut bolts of the base frame. Providing and fitting graphite gland packing with fitting of pump glands. Coupling the pump and motor by way of fixing of coupling bolts with heavy duty coupling. Job includes cost of graphite gland packing, nut bolts of the base frame and labour charges for skilled and semiskilled workers deployed for execution of job.Installation of Suction Line and Delivery Line (01 Nos.): Installation of existing pipelines and fabrication of suction line & delivery line (where required) of G.I. pipes, M.S. bends - quantity as per site requirement for connecting pump suction inlet & delivery to suction manifold/sump tank and Delivery manifold respectively. The job includes cutting the pipe in required lengths as per new alignment/layout condition of suction & delivery line at site after new foundation. The cut edges have to be grinded to give them smooth and even surface for proper welding. Welding the flanges to bends and to the pipe pieces at proper ends, and then joining the suction line to the suction manifold by way of proper welding works in precise manner. Also fitting of existing sluice valve at appropriate place in the suction line and joining of the other end of the suction line to the pump suction inlet by providing fitting of hexagonal fasteners and rubber insertion sheet. The job also involves cutting the pipe in required lengths as per alignment/layout conditions of delivery line at site, the cut edges have to be grinded with grinder to give them smooth and even surface for proper welding, welding the flanges to bends and to the pipe pieces at proper ends in a precise manner, fitting of existing sluice valve and reflex valve at appropriate place in the delivery line and jointing of one end of the delivery line to pump delivery outlet by providing and fitting of hexagonal fasteners and rubber insertion sheet, and then joining the other end of the delivery line to the delivery manifold. The job also includes repair to Starter and 75 HP induction motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site. Also, replacement of malfunctioning main switch. The job also includes repairing/replacement of sluice valves & reflex valve, if any. The whole job includes cost of material i.e., G.I. Pipes, welding rods, M.S. flanges, M.S. bends, nut bolts, rubber insertion sheet, oxygen acetylene gas used and POL used by DG set, hire charges/carriage charges of welding set, DG set, gas cutting apparatus, and labour charges for skilled and semi-skilled workers deployed for execution of job | 1 | job | 2,80,934 ₹2,80,934 Lowest | 3,05,000 ₹3,05,000 | 2,95,300 ₹2,95,300 |
Tender Value
Refer Docs
Closing Date
1 Oct 2025, 6:00 pmClosed
Office of Ex En PHE Division Reasi
Office of Ex En PHE Division Reasi
Retrofitting of foundation of pumpset at stage I salal kote
2025_PHE_289892_1
ENIT No PHER/20 of 2025-26
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
30 days
Reasi
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
10 Oct 2025
26 Sept 2025
3 Oct 2025
26 Sept 2025
1 Oct 2025
26 Sept 2025
Amount
Retrofitting of foundation of Pump set and other allied works by way of: INSTALLATION of existing Pump set 10000 GPH X 220M- Foundation Blocks (01 No):Construction of R.C.C. foundation block – 01 No of required size as per base frame of pump set inside the pump room for installation of pumping unit by demolishing the existing damaged foundation block of requisite area with jack hammer, high carbon steel chisel and sledge hammer, excavation of soil to finish with required dimensions of the pit, removal of demolished/excavated material and disposing off the same outside the pump room at a suitable place as per site conditions.The job then includes providing and laying a layer of crushed stones 40 mm and ramming properly. Laying of one layer of 1:3:6 concrete mass 30 mm thick. Fabrication & Providing of steel foundation bolts of required dia. 600 mm in length – 6 Nos. having threaded portion at one end and anchor at the other end. Also providing fabrication of steel hexagonal nuts and washers for the foundation bolts.Fabrication of steel reinforced cuboidal structure of requisite size for the foundation block out of T.M.T. steel bars 10 mm thick by way of cutting, the steel bars of required length and placing in position at proper spacing longitudinally and transversely binding with black annealed wire to make required cube meshes of 6 size are formed. The job includes fabrication charges as well as hire charges of welding set. Lowering the reinforced/cuboidal steel structure in the pit and then placing the base frame of the pump over the steel reinforced cuboidal steel structure making proper leveling and alignment of the base frame over the cuboidal steel structure.Placing the threaded end of the foundation bolts in upright vertical position at required distance in position and in alignment after lowering through holes of base frame. Binding of the foundation bolts with the steel mesh of cuboidal steel reinforced structure at various spots and then fastening the base frame over the reinforced steel structure by tightening the nuts of the foundation bolts, simultaneously ensuring proper leveling and alignment of the base frame over the reinforced cuboidal steel structure.The job further includes laying of M-20 grade cement concrete block including steel reinforcement, machine mixing laying and compaction with vibrator using stone aggregate 1:11/2:3 mix (1 cement 11/2 coarse sand and 3 graded stone mixture of specified grade of nominal size 20mm) including binding chemical up to top level from inside the base frame and up to the bottom line of base frame from outside of the base block, also plastering the exposed surface of block.Construction of drain for draining out the occasional leakage water of pump. Also repairing of damaged flooring where required with cement concrete mixture using chemical bonding material for smooth finish of the flooring of the pump room, and proper curing of cement works for proper strength for a minimum of 07 days. The whole job also includes cost of material and carriage charges for all material from various sources by Meech. Transport as well as head load, hire charges of shuttering material, vibrator and concrete mixture and welding set, POL for vibrator and concrete mixture, labour charges for laying of foundation block, including skilled and semi-skilled workers deployed for execution of job.Installation (01 Nos.): Installation of existing 10000 GPH X 220M Head H.C. pump set on the set foundation block at the pump room by way of providing and fitting of bolts with nuts and washers for fitting of motor and pump on the base frame, as well as leveling of pump and motor in proper alignment with each other. Tightening the nut bolts of the base frame. Providing and fitting graphite gland packing with fitting of pump glands. Coupling the pump and motor by way of fixing of coupling bolts with heavy duty coupling. Job includes cost of graphite gland packing, nut bolts of the base frame and labour charges for skilled and semiskilled workers deployed for execution of job.Installation of Suction Line and Delivery Line (01 Nos.): Installation of existing pipelines and fabrication of suction line & delivery line (where required) of G.I. pipes, M.S. bends - quantity as per site requirement for connecting pump suction inlet & delivery to suction manifold/sump tank and Delivery manifold respectively. The job includes cutting the pipe in required lengths as per new alignment/layout condition of suction & delivery line at site after new foundation. The cut edges have to be grinded to give them smooth and even surface for proper welding. Welding the flanges to bends and to the pipe pieces at proper ends, and then joining the suction line to the suction manifold by way of proper welding works in precise manner. Also fitting of existing sluice valve at appropriate place in the suction line and joining of the other end of the suction line to the pump suction inlet by providing fitting of hexagonal fasteners and rubber insertion sheet. The job also involves cutting the pipe in required lengths as per alignment/layout conditions of delivery line at site, the cut edges have to be grinded with grinder to give them smooth and even surface for proper welding, welding the flanges to bends and to the pipe pieces at proper ends in a precise manner, fitting of existing sluice valve and reflex valve at appropriate place in the delivery line and jointing of one end of the delivery line to pump delivery outlet by providing and fitting of hexagonal fasteners and rubber insertion sheet, and then joining the other end of the delivery line to the delivery manifold. The job also includes repair to Starter and 75 HP induction motor with sleeve to end cover and replacement of bearings both at NDE/DE complete with dismantling and assembling at site. Also, replacement of malfunctioning main switch. The job also includes repairing/replacement of sluice valves & reflex valve, if any. The whole job includes cost of material i.e., G.I. Pipes, welding rods, M.S. flanges, M.S. bends, nut bolts, rubber insertion sheet, oxygen acetylene gas used and POL used by DG set, hire charges/carriage charges of welding set, DG set, gas cutting apparatus, and labour charges for skilled and semi-skilled workers deployed for execution of job
PARVEEN ENGINEERING WORKS (BID ID -2561697)
GK electrical Engg. works (BID ID -2561692)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .