REPAIR TO POTHOLES WBM BITUMINOUS ROAD KERB STONE ROAD FURNITURE AND OTHER WORKS UNDER AGE BR II FOR GTRE CDA DSC CABS CEMILAC BANGALORE

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces of affected grass area up to grass root exc 50mm deep and n exc 100mm deep and area n exc 400 Sqm complete.

M&L preparing surfaces by brushing with wire brushed for removing caked mud etc sweeping with brooms and finally fanning to cleaned surface with gunny bags to remove all loose dirt etc from unsurfaced water bound macadam complete all as specified and as directed.

Applying evenly a premix /tack coat with bituminous primer (using paving bitumen ) 10 Kg per ten Sqm complete all as specified and as directed.

Repairs to potholes any depth, not exc. 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, including priming/tack coat with bituminous primer at 5 kg/10 sq m and well ramming complete all as specified and as directed

Premix bituminious macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) using binder content of 4% by weight of total mix complete all as specified and as directed

Preparing of existing black top surface brushing with wire brushes for removing caked mud etc sweeping with brooms & finally fanning the cleaned surface with air pressure to remove all loose dirt etc & applying evenly a priming/tack coat with bituminous primer using paving bitumen VG 30 @ 5 Kg per 10 Sqm of road surfaces complete all as specified and as directed.

Premixed semi dense bituminous carpet 30mm thick consolidated thickness with 5.5% binder content ( bitumen of grade VG 30 paving bitumen) by weight of total mix rolled and compacted to required camber and gradient with 8 to 10 ton power roller ,including preparation of bituminious carpet in hot mix plant and laying with self propelled mechanical paver complete all as specified and as directed.

Demolition of cement concrete (unreinforced) (as in kerb stone) of any description and in any position not otherwise specifically provided for.

M&L for pre-cast cement concrete type B1, 1:2:4 (using 20mm graded stone aggregates) as in kerb stone of over all size 450 x 350 x 150mm thick including chamfers, weatherings, throating etc and setting in cement mortor 1:4 complete with joints to match.

M&L preparation of new concrete surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Supply and fixing metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

M&L preparation of old concrete surfaces of any description over 10 cm in width or girth and applying one coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Refixing of Ms work obtain from item No 16 here-in-before, frame work complete all as specified and as directed

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed

M&L preparation of new or previously untreated Steel surfaces & priming with red oxide and applying two coats of synthetic enamel paint of any description, over 10 cm in width or girth, not otherwise described complete all as specified and as directed

Grubbing up tree root n exc 45 cm deep protruding over round, digging out roots, filling holes with coarse aggregates and leveling off ground complete all as specified and as directed

MANJUNATHA CONSTRUCTIONS