CERTAIN MISC MAINT WORKS OF PLINTH, PATH, HARDSTANDING, DRAIN, BOUNDARY WALL AND OTHER MISC B/R WORKS AT MANDIR MARG, MANEKSHAW MARG, URBAN VILLAGE, CHURCH ROAD, CPG AND OTM/MD ACCN AREAS /OTHER MINOR UNITS IN THE AOR OF AGE B/R-I UNDER GE (EAST) DEL

Amount

M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.

M & L for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in lintels up to 1.5 metre clear span, bed blocks, copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete including demolition of existing coping all as specified and as directed.

Taking down cement or cement lime plaster , any description on brick or stone walls or from concrete surfaces/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair in any position incl scafolding etc, complete all as specified and as directed.

M & L for Preparation of new/Old plastered external surfaces of walls upto 4 storied buildings and applying 2mm thick layer of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applyingg Two coats of 100% Premium/Ist quality acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) over and including priming coat of exterior primer complete all as specified and as directed. Make: BERGER (WEATHER COAT ALL GUARD), ASIAN PAINTS (APEX ULTIMA), NEROLAC (EXCEL TOTAL)

M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern (groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove) complete including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down cement plaster on brick or stone walls including raking out joints hacking for key and scrubbing down with water complete all as specified.

M & L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required (Size and pattern as approved by GE) and including dismantling of old existing kerb stone of any type and size etc complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint, any tint on New/ old painted plastered surfaces or brick, stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth over 2mm thick wall care putty a coat of cement primer complete all as specified and as directed.

M & L for Ready Mix cement concrete (RMC), 1:2:4 Type B-1 using 20mm graded stone aggregate as in Hardstanding/Pathway and similar nature of work in any position and location duly maintaining proper slope/gradiant as required at site and using form work at sides where required including demolition of cement concrete (unreinforced) in any position not exc. 15 cm thick (below or above ground level). (Note: 1. The flooring required of various thickness as per site condition shall be also measured and paid in Cum. 2. No extrapayment shall be made for formwork used 3. Necessary vouchers of RMC from plant shall produced duly defaced by Engr-in-Charge during payment of RAR)

M & L forming 12mm thick expansion joints filled with pre formed bitumenous filler and top 30mm primed and sealed with sealing compound grade B' in 100mm thick concrete slab complete all as specified and as directed by Engineer-in-Charge

M & L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound including cutting the set cement concrete (by using electrical cutter) for forming contraction joint complete all as specified

M & L for preparation of any type of surfaces old/new or in any position and applying two coats of indigo floor paint as directed by Engr-in-Charge and at site complete

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

M & L for mild steel work , Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including erection in ground and including dismantling of existing mild steel of any type complete all as specified and directed.

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plain or corrugated AC sheeting, any gauge, thickness, complete all as specified and as directed.

M & L for Stainless steel work grade AISI 304 (as in vertical post, hand rails, railings in gallery, purlins, including special shaped, washers horizontal/vertical also ornamental works like designer gate, chain, lattoo any type and size as approved by GE and as reqd at site) fixed/welded in any position etc., complete using stainless steel fittings, notching, drilling, grinding, fitting cleats, fish plates, gusset plates, bolts & nuts etc. including dismantling of existing wrought iron of any type and position complete all as specified and directed.

M & L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders,walk ways; railings, drain cover/grill con forming to Fe.290.Gde-E-165 complete all as specified and as directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring including Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over & including 15mm thick screed bed in CM 1:6 including dismantling of existing flooring or tiles of any type and size complete all as specified and as directed.

M & L external designer floor tiles, parking tiles etc any colour, shape and size exc. 0.06 sqm but not exc. 0.36 Sqm 8 mm to 10 mm mm thick , set & jointed in neat cement slurry and pointed flush with grey cement and pigments to match colour of tiles in floors over & including 15 mm thick screed bed or bedding layer in CM 1:6, including dismantling of exisiting tiles of any type with bedding layer, complete all as specified and as directed.

M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid over & including 50mm thick sand cushioning, laid duly mainting propper slope as per requirement at site over hardstanding/path including dismantling of existing interlocking tiles of any type complete all as specified and as directed.

M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 80 mm thick, M-35 Grade with grey cement and pigment laid over & including 50mm thick sand cushioning, laid duly mainting propper slope as per requirement at site over hardstanding/path including dismantling of existing interlocking tiles of any type complete all as specified and as directed.

S & F wall cladding tiles of size 300mmx600mmx10-12mm thick on vertical surfaces of wall over and including 10mm thick cement plaster in CM 1:4 (Make : Unistone/ultra or equivalent) and as per sample approved by GE including dismantling of old tiles with backing complete all as specified and as directed.

S & F "RAJSHRI" Brand factory made WPC railing combining WPC board/Fancy designer type grating and WPC frame 100% solid WPC (wood polymer composite) railing of required length and of 2' to 2.5' height , comprising of virgin PVC resin of K value 58-60 (Suspension Grade) , Calcium Carbonate and natural fibres (Wood Powders/rice husk//wheat husk) and non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650kg/cbm and WPC frame having minimum density 780kg/cbm manufactured by "RAJSHRI" an ISO 9001-2015 certified Company, having good screw holding capacity (screw withdrawal strength of 2000N (Face) & 1100N (Edge) , Minimum comprising of 50N/mm2, Modules of elasticity 850N/mm2 and resistance of speed of flame of class A category with property of being termite/Borer free water /Moisture proof and fire resistance. For WPC railing WPC jali to be fixed with WPC frame of size 75x50mm with necessary supporting lengths at vertical as well as horizontal at wall frames to be fixed with 3"x3" GI 'L' or SS cleats to support vertical frame lengths including demolition /dismantling of existing RCC jallies with frames complete all as specified and as directed. (Make : Rajshree or equivalent) (Note : The said item shall be fixed over boundary walls/roof tops and in any other positions as requirement at site)

M & L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof kerb, mud stops, platform for OHT, etc., and similar type of works including weathering, slightly rounded or chamfered angles, complete all as specified and as directed.

M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15 mm average thickness in single layer and finishing with trowel with a bond coat SBR polymer @ 10% of cement weight modified cementious bond coat @ 2.2 kg cement/Sqm of surface area including taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas.

Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. (Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac). Notes:(1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.

Removing excavated matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

M & L for 200 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete Including demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 200 mm bore incl forming cradles complte all as specified and directed.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm to 300 bore drain pipe complete all as specified and as directed.

M & L for laying 40mm thick bitumen mastic wearing coarse with industrial bitumen conforming to IS 702 prepared by using mastic cooker and laid to required level and slope and cleaning the surface , incl demolition/taking down and removal of debris of existing road surfaces of any type complete all as specified and as directed.(Density of mastic asphaltic as 2.29 gm/cc and percentage of bitumen 10.20% as per MORTH specification)

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item 37 here-in-before but MS tie bars 8mm dia and over upto and including 8mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and similar work; vertical or to batter complete.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished surfaces of concrete laid flat complete all as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M & L for RCC M25 Design Mix using 20mm graded agg as in footings, plinth beam and bases of columns and the like including demolition of existing Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in beams,lintle/plinth bands cantilevers, bressumers, lintel over 1.5m clear span supported on walls and the like including demolition of existing Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in columns , piers posts and struts and the like including demolition of existing Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed.

M & L for 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over & including 15 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as directed.

M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

aggarwal engineers contractors

sunil traders

M/s Durga Traders

SHIVA ENTERPRISES

Vipul Construction

N.M. ASSOCIATES

M/s Shubh Enterprises

a.k constructions