COMPREHENSIVE MAINTENANCE TO OTM ACCN IN ZONE A AREA UNDER GE (SOUTH) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down chowkhats or frames (Wooden joineries with wooden or steel chowkats) complete with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each and removing from site or to store as directed by Engineer incharge.

Taking down chowkhats or frames (Wooden joineries with wooden or steel chowkats) complete with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store as directed by Engineer-incharge.

Taking down wooden shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each and removing from site or to store as directed by Engineer incharge.

S &F Pressed steel framed made out of 1.25mm thick MS sheet, of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

Description all as per serial item No 5 here-in-before but size 105 x 60mm complete all as specified and directed.

M&L For Cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in mass concrete or filling backs of chowkats complete all as specified and as directed by Engineer in charge.

Factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.

S & F Anodised aluminium window and ventilator shutters fixed type without sash bar, powder coating of any colour ( thickness of powder not less than 50 microns). Aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified

Powder coated 50 microns extruded aluminium glazing doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. and aluminium beads 20mm size complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

S & F in repair Aluminium tower bolt 200mm long Add and fixed complete all as specified and directed.

S & F in repair Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F in repair Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified and directed.

S & F in Repair Floor door stopper 150 mm long of aluminium alloy body and toungue anodised with hard drawn steel spring fixed in floors complete all as specified and directed .

S & F in repair Aluminium handles of size 150mm oval typecast type anodised complete all as specified and directed by Engr-in-Charge.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conformint to Fe-410 W

S & F Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing S& F. Make : Rajshree Doors or equivalent as approved by GE

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. Make : Rajshree Doors or equivalent as approved by GE.

S & F 100 mm size PVC butt hinges all as specified and directed.

S & F 125 mm PVC handles all as specified and directed .

S & F 200 mm long PVC tower bolt all as pecified and directed .

M & L For Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer incharge.

Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8mm square bars, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 complete. as approved by GE Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill as shown on drgs. (iii) Glazing, wire mesh & painting shall be measured & paid for separately.

Taking down old unserviceable wire cloth any size from wooden/ metal frames complete all as specified and as directed .

S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples incl replacement of second class wooden beading where ever reqd complete all as specified & as directed.

Hacking out old broken glass (any thickness , size , quality or description) from wooden or metal frames glazed with oil putty or fixed with beads

S & F Sheet glass ordinary quality 4 mm thick not exe.0.50 sqm glazing with oil putty or fixed with wooden beads in squares any size of pane complete all as specified & as directed.

Description all as per serial item above here-in-before but 4mm thick frosted glass complete all as specified and directed.

S&F Mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding complete all as specified & as directed.

Demolition of cement concrete un-reinforced in ground floors and pavings n'exec 150 cm thick (above or below ground level) complete all as specified and directed.

Demolition of re-inforced cement concrete of any description and in any position incl cutting of re-inforcement to facilitate demolition where ever reqd complete all as specified and directed.

M & L for Machine cut Mirror polished Kota stone 20mm-25mm thick slab as in cooking platforms/ landings, treads and risers of stairs and steps laid over and including screed bed or 15mm th bedding layer in cement mortar 1:3 as base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing, polishing complete all as specified and directed.

M & L for Machine cut Mirror polished Kota stone slab flooring 20mm-25mm thick laid over and including 20mm screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing, polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge , such as in steps, cooking plateforms & other similar situations complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for Glazed ceramic coloured tiles in verticle surfaces joint free with glazed economy finish Grade B-II (b) of size 300 x 600mm or bigger size 7 mm thick as approved set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 10 mm thick rendering in cement mortar in CM 1:3 for Dado etc., complete all as specified. Note for skirting only Skirting may be provided from the same tiles as being used in the floor of same room to match in lieu of economy finish tiles but nothing extra shall be admissible on this account.

M & L for Non Skid Ceramic joint free tiles {Non Skid finish/ Matt superior finish Grade B-I or B-II (b) as approved} 7 to 8 mm thick with rectified edges, (square/rectangular) area of each tile exceeding 0.11sqm and not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick cement screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge

M & L for Vitrified Ceramic tiles 8-9mm thick light colour (Square/ rectangular) polished, area of each tile 600 x 600 mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 15mm thick screed/ bedding layer in CM 1:4 complete all as specified and as directed.

M & L for PCC 1:2:4 type B1 (using 12.5mm graded stone aggregate) 25 mm thick to receive the floor tiles.

Taking down cement plaster or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed

M&L for efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface after taking down plaster from brick work and finally apply 15 mm thick plastering with mixing of (URP 301) over treated surfaces.(note:- (i) taking down plaster and applying of 15mm thick plaster will be measured separately) (note ii :- after taking down plastering, uneven/brick joint surfaces will be repaired with cement mortar in 1:3 with mixing of WPC URP 301.

M & L for rendering 15mm thick cement plaster in cement mortar 1:4 using WPC on fair faces of brick or concrete surfaces on walls etc., finished even and fair without using extra cement, complete all as specified and directed. Note: - Supply only WPC Shall be measured separately & paid for accordingly & shall be provided @ 3% by weight of cement or as per manufacturers instructions as directed by Engineer in Charge

Supply only Liquid waterproofing compound

M & L for rendering 10 mm thick cement plaster in cement mortar 1:6 on fair faces of brick or concrete surfaces on walls etc., finished even and smooth without using extra cement, complete all as specified and directed.

Dubbing out average 15 mm thick in cement mortar 1:4 on irregular faces of walls, ceiling & chhajjas incl removing carefully old damaged loose concrete from RCC / PCC surfaces of ceiling/ Chhajjas for double storey bldgs complete all as specified and as directed by Engineer incharge.

M & L for Rendering 10mm thick cement plaster in CM 1:3 on concrete surfaces in ceiling/ Chhajjas finished even and smooth without using extra cement all as specified.

Preparation of new plastered or unplastered surfaces of walls etc., and M & L for applying two coat of distemper Oil Emulsion (OBD) over a coat of chalk whiting (as primer) complete all as specified and as directed.

M & L for Preparation of new plastered or unplastered surfaces of ceiling etc., and applying three coat of lime white wash on ceiling surfaces all as specified.

Preparation of new plastered or unplastered surfaces of walls etc., and M & L for applying two coat of cement base paint over a coat of Alkli Resistance priming paint (as primer) complete all as specified and as directed.

M & L for PCC 1:2:4 type B1 (using 12.5mm graded stone aggregate) as in roof kerbs, PCC Khurras, coping on parapet wall, mud stops, steps small sumps and like items slightly rounded or chamfered on the edges all as directed by Engr-In-charge

Racking out joints , hacking for key incl removal of all grass, vegetation growth from roofs etc., and M & L for flush pointing to roof tiles/ terracing in cement mortar 1:3 complete all as specified and directed.

Demolition of Brick work including all quains and arches pillars etc built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' old size bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed

M & L 50mm thick PCC (1:3:6) type C2 (using 40mm grade aggregate) as in plinth protection, finishing the surfaces even & smooth w/o using extra cement.

S & F precast concrete interlocking paver block any shape and size & incl 25mm thick layer of sand cushion complete all as specified and as directed. confirming to IS 15658-2006 of 60 mm thickness, M-35 grade

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Dismantling timber scantlings in framed work 40 sq. cm and over in section, in any position

Anodised aluminium snap grid frame work for false ceiling all as specified (Size of grid 605 x 605mm) incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Material & labour for Gypsum Board 600mmx 600mm x 12mm thick in ceiling fixed as per manufacturers instructions all as specified and as directed by Engineer incharge.

S & F for hollow PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

M & L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S &F in repair PVC (SWR) pipe110 mm bore Rain water pipe single socketed in any length with rubber ring joints, fixed to wall.

M&L for 15 mm thick rendering in CM (1:3) mixed with water proofing compound @ 0.20 Ltr/bags on Sunken Surfaces when concrete is green

Applying three coat of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg/ sqm all as specified

M&L for PCC 1:2:4 type B0 Using 12.5 mm graded stone agg as in as in PCC combing / benching on floor/ wall juction of sunken portion complete all as specified and directed.

PCC 1:7:12 mix, type E2 ( using 40mm graded brick aggregate ) as in filling of sunken portion complete all as specified and directed.

Providing 40mm dia GI pipe medium grade spouts 60cm long including taking down existing pipe complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc.,) sheets in roof coverings complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section , unframed work in any position

Dismantling/ Taking down framed wooden trusses exceeding 4.00m span bu not exceeding 8.00 m span and removimg from site complete.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410- W(Gde- E-250) quality-B

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit with all accessories ie PVC gutties etc terminated including sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done. . Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.(iii) Cutting chasing whereever required including conduit pipe and making good the disturbed surface shall be part of job at no extra cost

All as per item No 2 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 2 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 2 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular Socket 6A/16A - 2/3 pin combined 2 module type all as specified and directed.

M&L for Modular Socket, 6A - 2/3 pin combined 2 module type all as specified and directed.

M&L for Modular switch 1 way 6A, 1 module type all as specified and directed.

M&L for Modular switch 1 way 16A, 1 module type all as specified and directed.

Material and labour for Modular Bell push 6A 1 module complete all as specified and directed.

M & L for Fan step regulator, 120W -AC 230 Volt modular type all as specified and directed.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 6.0 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed.

Supply & fix in replacement of existing unserviceable Sheet metal enclosure with new DB’s with degree of protection IP 54 suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job.

Supply and fix in replacement of MCB SP up to 6-32 Amp all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable flat or circular stranded conductor size of 10 Sqmm, 2 core complete all as specified.

M&L for replacement of existing UNSV switch piano flush type single pole one way 5/6 Amp.

M&L for replacement of existing unserviceable socket outlet 2 in 1, 3 pin 5 Amp.

M&L for replacement of existing unserviceable socket outlet 2 in 1, 3 pin 5 & 15 Amp flush type .

M&L for replacement of existing UNSV switch piano flush type single pole one way 15 Amp .

Supply and fix in replacement of Recess mounted LED luminaire with more light distribution and clutter free ceilings of 36 watt suitable for gridd celling Cutout dimensions: 2x2 Model :Immaculate LED Trimless.

Supply & fix in replacement of existing unserviceable wall mounted fitting with Decorative, wall mounting, style antique golden wall lamp with Single shades round gold and inclding 10 W bulb complete all as specified.

Supply & fix in replacement of existing unserviceable wall mounted fitting with Decorative, wall mounting, style antique golden wall lamp with two lamp shades round gold and inclding 10 W bulb complete all as specified.

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed.

Supply & fix in replacement of existing unserviceable batten fitting , decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient 20W including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of existing unserviceable mirror light with Linear & compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt.

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 15/18 watts for batten fitting, including plastic square board of required size complete all as specified.

S & F LED Lamp Ball Lamp 9 Watt all as per specified and directed.

Material and labour for call bell ding dong AC 230 volt single pole complete all as specified.

S & F new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed.

Supply and fix in replacement of MCB TPN 63 Amp all as specified and directed.

Supply and replace existing unserviceable SP&N enclosure with 2 pole and Earth Metal Plug & Socket for incorporating 10A / 20A SPN / DP MCB With Plastic Coverearth complete with one single pole MCB of 20 Amp complete all as spd and directed .

Supply and replace environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit led luminaire comprising of high brightness leds of capacity10 Watt .

Supply and replace Led post top fitting 40W powder coated aluminium die cast and spun aluminium with clear/ opal diffuser suitable for landscape lighting in IP65 including GI Pipe of suitable dia and height reqd at site including PCC work and connection properly with existing LT OH line or From main MCB DB complete all as specified and directed .

Supply and replace Led post top fitting 25W powder coated aluminium die cast and spun aluminium with clear/ opal diffuser suitable for landscape lighting in IP65 including GI Pipe of suitable dia and height reqd at site including PCC work and connection properly with existing LT OH line or From main MCB DB complete all as specified and directed .

Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy dutyelectric cable with aluminium conductor, 1100 volt grade of crosssectional area 25 Sqmm 3.5 Core all as specified & directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of Pipes, cables, poles,Stay and strips etc and getting out in Soft/Loose soil complete all as specified.

Returning, filling-in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified.

Removing excavated material not exceeding 50m and depositing where directed at a level of not exceeding 1.5m above the starting point.

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

M & L for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed .

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed.

Supply and fix in replacement of square Surface mounted LED panel PDC aluminium housing and high translucent frosted plastic diffuser of 18 w and luminair efficacy 100 lm/w complete all as specified and directed

Supply and fix in replacement of round Surface mounted LED panel PDC aluminium housing and high translucent frosted plastic diffuser of 18 w and luminair efficacy 100 lm/w complete all as specified and directed

M&L in replacement of existing unserviceable earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I

S&F in replacement sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways confirming to IP 54 (one incoming three phase & four out goings three phase )for MCCB, comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 10 KA IHLGSF0100 =01 NO as incoming (Note :- (i)The DB shall be VTPN series of MDS-LOADKONTAKT (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly.

Supply and fix in replacement of MCCB 63 Amp 4 Pole 415 V complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of existing unserviceable batten fitting , decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient 10 W including neccesary fitting on wall and making electric connection from ceiling rose to connector with suitable size of electric cable and making good the disturbed surface complete all as specified and directed by Engr-in-Charge.

m/s s.n. builders (BID ID -3087725)

M/S RAJ KUMAR GUPTA (BID ID -3082237)

rkkataria and sons (BID ID -3087397)

SWAMI ENGINEERS (BID ID -3081559)

HG construction (BID ID -3091154)

Buttar Construction Co. (BID ID -3084857)

M/S Mukesh Kumar Gupta (BID ID -3086634)