PROVN OF DG SET (62.5 KVA) FOR PUMP HOUSE NO 7 AT MRC, TROLLEY MOUNTED DG SET (30 KVA) FOR OT, ICU AND LABOUR ROOM AT MH SAUGOR, AND DG SET (30 KVA) FOR MDC SAUGOR (MP) UNDER GE SAUGOR

Amount

Supplying, installing, testing and commissioning diesel engine driven generating set 30 kVA /24 kW (prime power), 415 volt, 50 Hz, 3 phase, 4 wire, at 1500 rpm, 0.8 lagging power factor including diesel engine, alternator, coupling, common base plate, acoustic enclosure, 12 V DC battery, AMF Panel. Exhaust system, foundation etc. complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 4 core, nominal cross sectional area of main conductor 25 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed.

M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 32 mm X 6 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed by the Engineer-in-charge.

Supplying, installing, testing and commissioning diesel engine driven generating set 62.5 kVA /50 kW (prime power), 415 volt, 50 Hz, 3 phase, 4 wire, at 1500 rpm, 0.8 lagging power factor including diesel engine, alternator, coupling, common base plate, acoustic enclosure, 12 V DC battery, AMF Panel. Exhaust system, foundation etc. complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 3 core with reduced neutral conductors (3½ core), nominal cross sectional area of main conductor 50 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed.

Supply, installation, commissioning and testing factory made, CPRI approved, indoor type LT panel board of adequate size (LT Change over Panel Box), made of mild steel sheet of 2 mm thick, powder coated, dust & vermin proof, front openable, double doors, compartmentalized, general construction confirming to IS: 8623 (Part 1): 1993, locking arrangements, suitable for 3 phase 4 wire 415 V, 50 Hz with 400 Amps rated copper bus bar, including mounting on angle iron frame made using angle iron 50 mm X 50 mm X 6 mm complete all as specified and as directed and shall be comprising the followings: - Incoming: (a) On load changeover switch of capacity 160 A, four pole, 415 V- 01 No (b) MCCB rated current(In): 160 A, Icu: 36 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, fixed thermal and fixed magnetic setting, four pole, for 415 V, 50 Hz AC supply: 1 No (c) MCCB rated current(In): 100 A, Icu: 25 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, fixed thermal and fixed magnetic setting, four pole, for 415 V, 50 Hz AC supply: 2 Nos (d) MCCB rated current(In): 63 A, Icu: 16 kA, Ics: 100% of Icu, Uimp: 8 kV, Ui: 690 V, IP40, fixed thermal and fixed magnetic setting, four pole, for 415 V, 50 Hz AC supply: 2 Nos (e) Star Delta Starter, 415 V, 3 Phase suitable for 25 HP pump set with single phase preventer- 1 No (f) Star Delta Starter, 415 V, 3 Phase suitable for 15 HP pump set with single phase preventer- 1 No (g) Starter DOL, 240 V, single phase, suitable for 7.5 HP pump set with single phase preventer- 2 Nos (h) MCB, Single Pole and Neutral, C-type instantaneous tripping, Rated current 16 A, 10 kA: 3 Nos (Note: The rate quoted by tenderer also includes to fix the legs of the panel box in cement concrete M15(Nominal mix) using 20 mm nominal size graded crushed stone aggregate 30 cm below GL and the box will be kept nearly 45 cm above GL including earthwork and allied services complete. The legs of the box will be of 50 mm X 50 mm X 6 mm of length 750 mm.)

M & L for cement concrete in foundation, filling and mass concrete in M10(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed.

M & L for cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, slab staging for water tanks, filling of pressed steel door frame, fixing of hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formworks complete all as specified and directed by Engineer- in-charge.

Supplying, installing, testing and commissioning diesel engine driven generating set 30 kVA /24 kW (prime power), 415 volt, 50 Hz, 3 phase, 4 wire, at 1500 rpm, 0.8 lagging power factor including diesel engine, alternator, coupling, common base plate, acoustic enclosure, 12 V DC battery, AMF Panel. Exhaust system, to be fixed on trolley etc. complete all as specified and as directed.

Supply only mild steel trolley for carrying diesel engine generator set of capacity 30 kVA with accoustic enclosure, AMF panel etc. with following specifications: - (1) Dimension of platform: 3000 mm X 1800 mm (with tolerance of ± 10 mm) (2) Height: 1500 mm (with tolerance of ± 10 mm) (3) Main chassis: Mild steel channel 100 mm X 50 mm (with tolerance of ± 2 mm) (4) Support bar: Mild steel channel 75 mm X 38 mm (with tolerance of ± 2 mm) (5) Platform: Mild steel plate 6 mm thick (6) Trolley side: Mild steel square pipe 50 mm X 50 mm (2 mm thick) and covered with welded mesh (7) Front and rear door: (02 Door) fabricated with mild steel angle iron 35 mm X 35 mm X 5 mm covered with welded mesh with heavy hinge and locking arrangements (8) Support for DO and insulator: Mild steel channel 75 mm X 38 mm, height 1720 mm & distance phase to phase 500 mm (9) Axle: 02 Axle, size 63 mm square and length 1500 mm, front with out brake drum, rear with break drum (10) Rims: 04 Nos (11) Tyre & tubes: 04 Nos inflated of size 7.50-16 (12) Suspension: Leaf spring suspension provided on all four wheel with hangers as U-bolts suitable for 2.5 ton gross weight, size 700 mm X 110 mm X 750 mm, 13 leafs in each set (13) Turnable: Mild steel channel 100 mm X 50 mm, mild steel plate suitable for turnable, centre pin 30 mm round bar, ring flat 50 mm X 8 mm (14) Draw bar: Mild steel channel 100 mm X 50 mm (± 2 mm) (15) Toeing hook: Mild steel round 30 mm (16) Loading capacity: Suitable to carry 30 kVA diesel engine generator set with accoustic enclosure, AMF panel, all fittings and fixtures etc. (17) Paint: Grey enamel paint

MORESHWAR ELECTRICALS CORPORATION

SUNIL ENTERPRISE

M/s arjeet singh ahluwalia

anil kumar sahu

MONA GENERATOR SEVICES PVT. LTD.

M/s VIKAS TRADERS