REPAIR TO WOODEN FURNITURE AT AF STN UTARLAI

Amount

Removing the unserviceable/worn out components without damaging the existing components supply & fix new components given below. The new components shall be made out of 1st class hard wood (Indian teak wood) duly french polished to match the existing components as shown in drawing of following items in quarters/Messes, unit line , area of MES furniture yard complete all as specified.

All as per item No.1.00 above but Chair dining for officer for following items :- Drg No - FD/MAP-II/04

Front legs with PVC shoes

Rear legs with PVC shoes

Back rest

Stiffener

Seat made out of 12 mm thick plywood commercial type BWR grade complete all as specified.

S&F Cushion 75mm thick 40 density with cover made of superior quality tapestry cloth as approved by Engr-in-charge

M&L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces.

All as per item No.1.00 above but CHAIR EASY for the following items :- Drg No: FD- 229

Side rail of seat frame

Rear rail of seat frame

Front rail of seat frame

Front leg with PVC shoes

Rear leg with PVC shoes

Back rest side rail

Back rest upper/lower rail

Arm rest

Material and labour for recanning of Chair Easy plastic with new vergin quality plastic cane of size 2mm wide white for weaving and 4mm wide plastic cane for borders as per Godrej pattern after removing the existing unserviceable cane all as specified and as directed by engr-in-charge.

M&L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces.

All as per item No.1.00 above but Peg table for following items :- FD - 236, FD-277

Legs with PVC shoes

Long rails

Short Rails

Replacement of unserviceable Table top with Supply & fixing New 18/19 mm thick one side teak face prelaminated particle board Exterior Grade duly covered with 20 mm wide teak wood beading/lipping 4mm thick duly polished fixed using fevicol complete all as directed by Engr-in-Charge

M&L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces complete all as specified.

All as per item No. 1.00 above but Table dressing gents for following items :- Drg No : FD - 230,379

Frame for mirror as per shown on drg

Drawer Complete of size shown in drawing

M & L 5.5 mm thick looking mirror, best quality with 6mm thick commercial plywood on back and fixed on existing frame complete

Knob, chromium plated.

Front/ left/ Right sides and top made of 12 mm thick commercial particle board with 1.5mm thick decorative laminated sheet

M&L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces.

All as per item No. 1.00 above but TEAPOY WOODEN for following items :- Drg No: FD- 278

Legs alongwith shoes as shown in drg

Short Rails as shown in drg

Long rails as shown in drg

Stiffener as shown in drg

Replacement of unserviceable Table top with & including Supply & fixing New 18/19 mm thick one side teak face prelaminated particle board Exterior Grade duly covered with 20 mm wide teak wood beading/lipping 4mm thick duly polished fixed using fevicol complete all as specified.

M&L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces complete all as specified.

All as per item No. 1.00 above but Table dressing ladies for following items :- Drg No : FD-251

Unserviceable Bottom side of table dressing ladies replaced with new 19mm thick teak veneer face one side and other side commercial particle board complete all as specified.

Unserviceable Front/ left/ Right sides and top repalced with new front/left/Right & top made of 12 mm thick commercial particle board with 1.5mm thick decorative laminated sheet

M & L 5.5 mm thick looking mirror, best quality with 6mm thick commercial plywood on back and fixed on existing frame complete all as shown in drawing

Unserviceable Drawer replaced with new drawer as per shown on drg complete

Unserviceable Glass stud with aluminium frame replaced with Glass stud with aluminium frameall as shown in drawings complete all as specified.

Legs with PVC shoes

M&L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces complete all as specified.

All as per item No.1.00 above but CHAIR DINING for the following items : Drg No:FD- 279

Front legs with PVC shoes

Rear legs with PVC shoes

Back rest

Stiffener (Side)

Stiffener (Centre)

Side rail of seat frame

Rear rail of seat frame

Front rail of seat frame

Material and labour for recanning of Chair dining with & including new vergin quality plastic cane of size 2mm wide white for weaving and 4mm wide plastic cane for borders as per Godrej pattern after removing the existing unserviceable cane all as specified and as directed by engr-in-charge.

M&L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces complete all as specified.

All as per item No.1.00 above but sofa Single seater for following items :- Drg No FD 373/281

Front legs alongwith shoes of size shown in drawing

Rear legs alongwith shoes of size shown in drawing

Back and seat stiffener of size shown in drawing

Hand rest of size shown in drawing

S&F foam Cushion 100mm thick 32/40 density for seat & back of sofa set single seater with new tapestry cloth superior quality tapestry duly approved by Engr-in-charge

M&L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces.

All as per item No.1.00 above but Book case wooden for following items :- Drg No : FD No 237

Top made of 18mm thick prelaminated particle board and all around the teak wood beading on exposed surfaces complete all as specified.

Bottom made out of 8mm thick prelaminated particle board and all around the teak wood beading on exposed surfaces complete all as specified.

Back made of 6mm thick plywood BWR type commercial grade as per existing size complete all as specified.

Shutter made out of 18mm thick prelaminated particle board with 6mm thick teak wood beading with piano type hinges complete all as specified.

Bottom frame long rail made out of Ist class hard wood complete all as specified.

Shelves made out of 18mm thick prelaminated particle board with teak wood beadaing complete all as specified.

Sides, made of 18mm thick prelaminated particle board complete all as specified.

Bottom frame short rail made out of Ist class hard wood complete all as specified.

legs of existing alongwith shoes size as shown in drawing complete all as specified.

Chromium plated knob best quality all as directed

M&L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces.

All as per item No.1.00 above but Hat stand with mirror for following items :- Drg No :FD-233

Mirror 5.5mm thick size as per drg with TW beading

Coat Hook ,Aluminium anodised as per existing size as approved quality

M&L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces.

All as per item No.1.00 above but BED PLYWOOD TOP for following items :- Drg No: FD-21(M), FD-246

Foot Board of size as shown in Drg complete

Head Board of size as shown in Drg complete

Long rail 1980x100x35mm

Short Rails of size as shown in Drg

Supports of size 50x50x900mm

Plywood 12 mm thick (BWR Grade) of size as shown in Drg complete

M & L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces .

SK INDUSTRIES