REPAIRS TO LEACKAGE, SEEPAGE AND SANITARY FITTINGS IN TOILETS, BATHROOMS AND KITCHEN IN ZONE B AKASH VIHAR AT AF STN SURATGARH

Amount

BOQ (REPAIRS TO LEACKAGE, SEEPAGE AND SANITARY FITTINGS IN TOILETS, BATHROOMS AND KITCHEN IN ZONE B AKASH VIHAR AT AF STN SURATGARH.)

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc but excluding precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregates as in filling of sunken floors, complete all as specified and directed.

M&L for applying for Dr. Fixit bathseal system over the sunken portion floor of bathroom, with the products in the "Kit' as details below ( Work Shall be carried out by only authorized applicator ) Dr. Fixit bathseal 2K WPC - Acrylic elastomeric cementitious waterproof coating for sunken portion floor and walls in bathroom, complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing ) and removing rubbish off the premises, complete all as specified and directed.

M&L for non skid ceramic coloured tiles of 7 to 8mm thick, (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm (including size 400mmx400mm), as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified and& directed by Engineer-in-charge.

M&L for vitrified ceramic tiles 10mm thick (square/ rectangular) polished area of each tiles not exc 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match with and including provision of 15mm thick screed bedding in CM (1:6), complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick ( Square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including rendering 10mm thick in CM (1:4), complete all as specified and directed.

S&F for glazed ceramic tiles size 350x250x7mm /450x350x7mm thick on vertical surfaces, set & joined in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including rendering 10mm thick in CM (1:4) complete all as specified and directed by Engineer-in-charge.

M&L for stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any type of mortar, complete all as specified and directed.

M&L for 25mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed or bedding layer of mortar 20mm thick for laying floor finish in CM (1:6) complete all as specified and directed by Engr-In-Charge.

M&L for udaipur green marble 18 to 20mm thick, prepolished, as in window & ventilator cills in single length including screed bed or bedding layer of mortar 20mm thick for laying floor finish in CM (1:6) complete all as specified and directed by Engr-In-Charge.

Demolition of cement concrete unreinforced in groundfloors and pavings not exc 15cm thickness below or above ground level etc, complete all as specified and directed by Engr-In-Charge.

M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub bases, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2021 of 60 mm thickness, M-35 Grade with grey cement and pigments, complete all as specified and directed.

M&L for 30mm thick sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed.

M&L for PCC 1:2:4, type B1 (using 20mm graded stone aggregate) providing, cement concrete in kerbs of mud stops, rounded or chamfered on edges, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in flooring, complete all as specified and directed

M&L for 50mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, complete all as specified and directed.

Complete removal of existing water proofing treatment including bedding if any not exc. 50mm thick etc. on any type of roof, cleaning with wire brushers etc. and removal of debris out side MD land, complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 25 to 55mm as per the requirements, complete all as specified and directed

M&L for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPC (WPC will be measured and paid separately as supply only), complete all as specified and directed.

Supply only integral Waterproofing compound, complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over a tack coat of dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning over primed surface. Top of APP based polymeric membrane will be painted with Aluminium paint @ 1 ltr per sqm, complete all as specified and as directed by Engr in Charge.

Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified and directed.

M&L for rendering 10mm thick plaster on brick or concrete surfaces in cement mortor (1:6) finished the surface even and smooth without extra cement as intrnal surfaces of wall, complete all as specified and directed.

M&L for rendering 15mm thick on concrete or brick masonry surfaces or surface other than fair face of brickwork in CM (1:4) as in external surfaces of wall, complete all as specified and directed

M&L for rough cast plaster, complete all as specified and directed.

M&L for water proofing layer with Dr. fixit primeseal external wall water proofing as per company instruction, complete all as specified and directed.

M&L for 5mm thick, plaster in cement mortar (1:4) on surfaces of ceiling and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bond distemper on chalk whiting over a coat of primer complete all as specified and directed by Engineer-in- Charge.

M&L for two coats of white wash on newly plastered ceiling surfaces including preparation of surfaces complete all as specified and directed by Engr -in-Charge.

M&L for applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns over a coat of primer, including preparation of new surfaces, complete all as specified and directed.

Taking down door chowkat or frame incl shutter area not exc 1.50 sqm each and removing to store, complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer omposite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note-(i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately (ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of rofile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In-Charge. Note: stainless steel butt inges and necessary S S screws shall be paid separately

S&F for mild steel butt hinges medium weight 100mm size. mild steel cold rolled complete all as specified and directed by Engineer-in-charge.

S&F for aluminium handle, cast type, anodiesed of size 125mm and fix to shutter, complete all as specified and directed by Engineer-in-Charge.

S&F for aluminium anodised, barrel tower bolt of extruded section and fix of length 125mm, complete all as specified and directed.

M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing in CM 1:6 to match existing work, complete all as specified and directed.

Dismantling of water tanks and removing to store capacity of tank exc 501 and not exc 1000 ltr, complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,1000 ltr capacity including, 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

M&L for dismantling water tanks and removing to store exc 250 and not exc 500 ltr, complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I, 500 ltr capacity including, 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F in repair PVC tank lid (cover) Suitable for 500/1000 Ltrs capicity water tank with hinged and hooked fixing by steel screw for existing PVC water tank on building, complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm bore to walls, ceiling etc, complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm bore to walls, ceiling etc, complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth, complete all as specified and directed.

S&F in repair medium grade GI tubing 15mm bore with all fittings , to walls, ceiling or laid in floors etc, complete all as specified and directed.

S&F in repair medium grade GI tubing 20mm bore with all fittings , to walls, ceiling or laid in floors etc, complete all as specified and directed.

S&F in repair gun metal globe or gate valves with iron wheel head screwed both end for iron pipe to 15 mm bore pipe, complete all as specified and directed.

S&F in repair gun metal globe or gate valves with iron wheel head screwed both end for iron pipe to 20mm bore pipe, complete all as specified and directed.

S&F in repairs for stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore, complete all as specified and directed.

S&F in repairs 15mm bib taps cast cipper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs viterious china White Wash Hand Basin fixed in repairs includign 15mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting, PVC waste pipe 32 mm dia and 15mm PTMT connection pipe 450mm long, complete all as specified and directed.

S&F in repairs soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair towel rail 600 mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats, complete all as specified and directed.

S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed.

S&F in repair sinks drtainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes: including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F in repair CP shower rose 125mm size with swivel joint including fixing sted pipe for union, complete all as specified and directed.

S&F in repairs for European type vitreous China wash down water closet pan (pedestal pattern), white,including plastic seat cover white, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device, complete all as specified and directed.

S&F in repairs Ivitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap set, and to flushing pipe, anti-syphonage pipe, etc, making good to floor and including trap set in and including con crete, complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts to length 450mm, complete all as specified and directed.

S&F in repairs PVC flushing cistarn 10 ltrs capacity ISI marked incl PVC pipe 450mm inlet etc, complete all as specified and directed.

M&l for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia out let, complete all as specified and directed.

M&L for PVC (SWR) multi floor trap with grating including jointing with solvent cement 100mm dia out let, complete all as specified and directed.

S&F in repair grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.

S&F for bib taps two way type, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule 15mm bore and fixed, complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465mmx 355mmx265mm white (minimum), with grating and union (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed, complete all as specified and directed.

S&F in repairs CP Health faucet spray with 1.5m long pipe with wall hook, complete all as specified and directed.

Dismantling of cast iron RCC, AC or PVC pipe jointed in CM any dia bore, complete all as specified and directed.

S&F of PVC (SWR) pipes of 110mm dia, single socketed fixed to walls, complete all as specified and directed.

S&F of PVC (SWR) pipes of 75mm dia, single socket fixed to walls, complete all as specified and directed.

S&F for 100 bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S&F for PVC (SWR) bends with access door of 110mm dia, any radius, complete all as specified and directed.

S&F for PVC(SWR) bends with access door of 75mm dia, any radius, complete all as specified and directed.

S&F for PVC (SWR) bends of 110mm dia, any radius, complete all as specified and directed.

S&F for PVC (SWR) bends of 75mm dia, any radius, complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sqm but not exc 4 sqm each and removing to the store, complete all as specified and directed.

S&F for powder coated, anodised aluminium frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, etc, complete all as specified & directed by Engineer-in-charge. Note :- Floor door spring & sheet glass shall be measured and paid seperately.

M&L for powder coated, Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc, complete all as specified and directed.

S&F for powder coated aluminum window and ventilator shutters, sliding type with three track (two track with glass and one track with SS wire cloth 0.50 mm nominal dia of wire & average width of aperature 1.00 mm and fixed with tinned tacks or galvanised wire staples, two track with and including 4.8 mm thick tined glass including necessary fitting and fixture) without sash bars, aluminum sections of size 40x20x1.5 mm fixed in aluminum anodised double frame of section size 63X35X2 mm including necessary jointing cleats, glazing clips, aluminum anodised sap beading, screws, aluminium beading, pvc packing, aluminum anodised fitting and fixture including aluminium chequered grills as on aluminium windows weight not less than 1.0 kg/sqm, complete all as specified and directed.

M&L for sheet glass 5.5mm thick, ordinary quality and glazing with, rubber packing exc 0.5 sqm in each pane, complete all as specified and as directed by the Engineer-in-Charge

M&L for solar control film 25 micron reflective type sticked to glass panes as per instructions of manufactures, complete all as specified and directed.

S&F for 2 levers brass mortice lock vertical type, size 100mm including escutcheon plates and two kays, complete all as specified and directed by Engr-in-Charge

S&F for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description no otherwise provided for, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F for MS work confirming to Fe-290 Gde E-165 as in post, strut, purlins & wind ties with (MS flat iron fillet, MS plate, round tubes & angle iron) necessary cutting, drilling, welding, bolting or riveting etc including embeding in concrete complete to any type of posts screwed in position with nuts, bolts & washers, etc, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile streangth of 550 Mpa as in roof covering\ cladding to wall , fixed with self tapping screws, complete all as specified and directed.

Demolition of reinforced concrete of any description and n any position not other wise specially provided for, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (Horizontal or sloping), complete all as specified and directed.

Use and waste of formwork to cornices and mouldings of any shape in cross section and of any girth, complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe 410-w or E-250, complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

H S BUILDERS (BID ID -3153716)

M/s JUGAL KISHORE MISHRA AND SONS (BID ID -3154219)

M/S VISHNU ENTERPRISES (BID ID -3154164)