REPAIR TO SUNKEN FLOOR, WCS, TAPS, PLINTH PROTECTION, FIXTURES WELCOME MAINTENANCE, REPAIR REPLACEMENT OF ALUMINUM DOOR, WINDOWS, FALSE CEILING ALONGWITH CERTAIN E/M WORKS AT AF STN CHANDINAGAR IN AOR OF GE (AF) FARIDABAD (2ND CALL)

Amount

Demolition of cement concrete (unreinforced) above ground floors exc 15cm thickness complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (unreinforced) in ground floors n exc 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size n .exc 1.5 Sqm and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and directed by Engineer-in-Charge

Supply and fixing in opening complete solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge

Supply and fixing for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. M>S frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside wqith solvent cement for stiles and plain colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site as per complete all as specified and directed by Engineer-in-Charge

Supply and fixing powder coated aluminium frame for doors, windows ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing ordinary quality sheet glass 5mm thick in panels of aluminium door and window etc fixed with aluminium clip and rubber beading all as specified n exc 0.5 sqm complete all as specified and directed by Engineer-in-Charge

Supply and fixing 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engineer-in-Charge

Supply and fixing mild steel butt hinges, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to angle iron frame where required complete all as specified and directed by Engineer-in-Charge

Supply and fixing for 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed by Engineer-in-Charge

Supply and fixing for 100mm aluminum handles cast type anodized complete all as specified and directed by Engineer-in-Charge

Supply and fixing for powder coated aluminium window and ventilator shutters with aluminium grill, side hund type without sash bars aluminium section weighing 0.55Kg/RM including necessary hointing cleats, glazing clips, rubber packing anodised aluminium snap beading, screws anodised aluminium fitting such as peg stay 150mm long (01no) hinges type B21, 100mm long (02 Nos) suitable handle (01 No) complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 15 mm bore chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 15 mm bore chromium plated Stop angle valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests including provision of cement concrete bedding complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern) white including connection to drain or out going pipe etc including making good the floor complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair waste coupling PTMT 32mm bore dia of discharge pipe (half or full threaded, minimum weight of 32mm dia 45gms) complete all as specified and directed by Engineer-in-Charge

Supply and fixing in polythene connection of low density polyethylene (LDPE) pipes of pressure rating 2.5 Kgf/Sqcm, 45cm long with and including two brass union couplings, heavy duty, suitable for 15mm bore pipe, one on each end for connecting polyethylene pipe to GI pipe and fixed complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair Brass chromium plated shower rose 125mm size complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs waste fittings 32mm dia brass CP for glazedware sinks basins etc with long screwed shanks and fly nuts flange end bedded in red lead complete all as specified and as directed.

Supply and fixing in repair Vitreous China wash basin, white, flat back, size 550x400mm , including cutting for and pinning in ends of brackets , including 32 mm dia CP waste waste fitting and PVC waste pipe of required length complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed by Engineer-in-Charge

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed by Engineer-in-Charge

Supply and fixing for 15 mm bore steel water tubing galvanised 15mm bore, medium grade fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed by Engineer-in-Charge

Supply and fixing for 20mm bore steel water tubing galvanised, medium grade fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engineer-in-Charge

Material and labour for glazed ceramic coloured tiles 300 x 200 x 7mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cm 1:4 on brick or concrete surface of wall to receive vertical tiles complete all as specified and directed by Engineer-in-Charge

M&L for Glazed ceramic coloured/printed tiles in vertical surface of size 450x350x7-8mm thick as in skirting and dado set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick backing coat in CM 1:4 complete complete all as specified and directed by Engineer-in-Charge

Material and labour for non skid coloured ceramic dark tiles of size 7-8 mm thick area of each tiles exceeding 0.11 Sqm bur not exc 0.18 Sqm (400x400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 20 mm thick screed bed in cm 1:6 complete all as specified and directed by Engineer-in-Charge

Material and labour for Non Skid ceramic dark tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (300x300mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in cm 1:6 complete all as specified and directed by Engineer-in-Charge

M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base 75mm thick complete all as specified and directed by Engineer-in-Charge

M & L for 75 mm thick PCC 1:3:6 using 20 mm graded stone aggregate as in plinth protection finished even & smooth w / o using extra cement complete all as specified and directed by Engineer-in-Charge

Material and labour for 100 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in pavement finished even and fair complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair 32mm bore PVC waste pipe for WHB, Sink etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth (w/o using extra cement) complete all as specified and directed by Engineer-in-Charge

Material and labour for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces of walls finished even and smooth w/o using extra Cement complete all as specified and directed by Engineer-in-Charge

Material and labour for preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with chalk whitening preparatory to distempering on surfaces of walls complete all as specified and directed by Engineer-in-Charge

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge

M&l FOR System treatment :Providing and applying two coats of Brushbond RFX of FOSROC or equivalent with a fibermesh sandwiched between two layersHigh performance Acrylic polymer modified Cementitious waterproof coating, shall contain a liquid polymer component and a Cementitious powder component, which shall be mixed as per manufacturer’s instructions and applied over prepared concrete surface strictly maintaining the coverage specified by the manufacturer. The applied material of BrushbondRFX should have 1.0mm thickness of cured coating membrane shall exhibit properties of static crack accommodation of 1mm according to ASTM-C836 or equivalent.terminating the coating at 300mm above FFL .Work shall be executed by Fosroc or equivalent Authorised applicator Strictly following the Instructions as per Fosroc or equivalent specifications complete incl cleaning the surface by wire brushing followed water jet to remove any laitance are loose flaky particles and incl racking out joints, hacking for key, scrubbing down with water etc complete all as per manufacturer’s specification and direction complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of white wash on wall complete all as specified and directed by Engineer-in-Charge

All as per item No 47 above but on ceiling complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of oil bound distemper on wall complete all as specified and directed.

All as per item No 49 above but two coats of oil bound distemper on wall complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old treated plastered surfaces of ceiling by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of oil bound distemper on ceiling complete all as specified and directed by Engineer-in-Charge

M&L for Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris/ malba to low lying area out side of MOD land and applying 3 to 5 mm thick a layer of Birla white wall care putty on scrapped/uneven surfaces to match with the existing surfaces before application of primer/distemper and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of cement base paint on wall complete all as specified and directed by Engineer-in-Charge

All as per item No 53 above but two coats of cement based paint on wall complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old wooden surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old painted steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge

Material and labour for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying two coats of weather proof exterior emulsion (water based) paint (in camouflage pattern) of dark colours/shade on walls (shade as approved by GE) including 1 coat of water based exterior primer on walls complete all as specified and directed by Engineer-in-Charge.

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge

S&F in repair 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs Harrison rails 25 mm dia mild steel chromium plated curtain rail fixing with brackets stops complete all as specified and directed by Engineer-in-Charge

S&F in repair of Vertical and Horizontal Venetian Blinds of superior quality and of leading manufactures, with approved colour, shade and fabrics including the cost of necessary powder coated aluminium channels, rollers and other accessories complete all as per manufacture’s specifications complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size exc 1.5 Sqm but not exc 4 sqm each each and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and directed by Engineer-in-Charge

Supply and fixing powder coated aluminium door shutters, aluminium section weighting 0.55 Kg/ RM including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium snap beading screws etc complete all as specified and directed by Engineer-in-Charge

Taking down of aluminium partition including glass and particle board etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing for powder coated aluminium partition fixed type/with out sash bars aluminium section weighing 0.55kg/RM incl necessary jointing cleats, glazing clips rubber packing aluminium snap beading, screw etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing ordinary quality sheet glass 5mm thick in panels of aluminium door and window etc fixed with aluminium clip and rubber beading all as specified exc 0.5 sqm complete all as specified and directed by Engineer-in-Charge

Material and labour for 9mm thick Prelaminated particle, board, exterior grade, prelaminated both side with both side decorative choice laminations fixed with screws/beading to timber/aluminium frame work complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair aluminium (die cast) body door closer hydraulically regulated designation No.3 universal type suitable for aluminium door shutters of width 851 to 1000mm and of weight between 61 to 80Kg complete all as specified and directed by Engineer-in-Charge

Supply and fixing for double action floor spring hydraulically regulated made ou of minium 1.25mm thick aluminium allooy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of MS heavy duty and fixed complete all as specified and directed by Engineer-in-Charge

Material and labour for 12mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs Harrison rails 20 mm dia mild steel chromium plated curtain rail fixing with brackets stops complete all as specified and directed by Engineer-in-Charge

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) any thickness, including cover fillets and grid frame work complete all as specified and directed by Engineer-in-Charge

M & L anodised aluminium snap grid frame work of size 605 x605mm for false ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as specified and directed by Engineer-in-Charge

M&L for 8 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed by Engineer-in-Charge

S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge

Taking down Geyser of any size and capacity after disconnecting all electrical and water connections, dismantling of geyser for checking of unserviceable parts, repair/replacement of worn out parts, reassembling, testing, cleanig with chemical to clear choking due to scaling and refixing in its original location incl making all necessary electrical & water connections complete all as specified and directed by Engineer-in-Charge. (Note: Parts will be measured separately and paid for under ‘Supplied only’ rates here-in-after)

S&F in Repairs Geyser Element Tringular type 1.5 KW complete all as specified and directed by Engineer-in-Charge.

S&F in Repairs Geyser thermostate for1.5 KW complete all as specified and directed by Engineer-in-Charge. Make: ISI Marked

S & F Geyser Base assembly /syphon ( rupturing plate or U assembly) any make and type for 25 Ltrs capacity water heater complete 6/9 hole ncl replacement of rubber seal nuts and bolts complete all as specified and directed by Engineer-in-Charge.

S&F Bottom cover plate with matching colour of geyser complete all as specified and directed by Engineer-in-Charge.

M&L for Glass wool of superior quality complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of Non return valve made out of cast copper alloy scerwed both and internally suitable for iron pipe of size 15 mm complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of Safety pressure valve complete all as specified and directed by Engineer-in-Charge.

S & F in replacement of indication lamp (pilot type) for 50 / 25 Ltrs water heater complete all as specified and directed by Engineer-in-Charge.

S&F of Innershell of Geyser Body( inner Tank ) made of steel ( as per suitable for existing) sheet of with themal insulation complete all as specified and directed by Engineer-in-Charge.

S&F of Innershell of Geyser Body( inner Tank ) made of copper ( as per suitable for existing) sheet of with themal insulation complete all as specified and directed by Engineer-in-Charge.

S&F of Outer cover Body of (as per suitable for existing) cover for geyser as per sample complete all as specified and directed by Engineer-in-Charge.

M&L for Brazing, welding to any size of inner shell copper/steel tank at leaking spot of any capacity any type Geyser after the repair checking up throughly for leaking including replacemnet of worned out nuts,bolt,and washer compete all as specified and directed by Engineer-in -charge

S&F in Repairs Geyser Element for instant type geyser (as per suitable for existing) 3 KW complete all as specified and directed by Engineer-in-Charge.

S& F in Repairs PVC connection 15 mm size with PTMT nuts of length not less than 300 mm suitable for hot water & cold water geyser connection complete all as specified and directed by Engineer-in-Charge.

Heating element 3 KW with thermostat for electrical Back up complete all as specified and directed by Engineer-in-Charge

S&F in repairs of cable 3 core 4 sqmm FRLSH PVC copper conductor complete all as directed by Engineer-in-Charge

S& F plug top of 16 Amp, 3 Pin 230 Volts , AC completeall as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated and (FRLS) unsheathed size 1.5 sqmm with PVC concealed Conduit ( dia not les than 25 mm) with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. contineous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 96 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmm wire with 1.5sqmm earth wire complete all as specified and directed by Engineer-in-Charge.

All as per item No 96 above but for one 3/5 pin socket 5 Amp on independent board with 1.5sqmmwire with 1.5sqmm earth wire complete all as specified and directed by Engineer-in-Charge.

All as per item No 96 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm incl contineous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm complete all as specified and directed by Engineer-in-Charge. Note:- (For item 96 to 99 ) Cost making good disturbed surface below existing point wiring taken out vide item No 96 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring vide item No 96 to 99 as applicable shall be deemed to be included in the unit rate quoted against these items.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed size 1.5 sqmm (FRLSH) drawn in and incl PVC casing and caping with fixing accessories for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

All as per item No 100 above but for one 3/5 pin socket 5 Amp on same board.with 1.5 sqmm wire with 1.5sqmm earth wire complete all as specified and directed by Engineer-in-Charge.

All as per item No 100 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5 sqmm wire with 1.5sqmm earth wire complete all as specified and directed by Engineer-in-Charge.

All as per item No 100 above but for 3/5 pins socket outlet 15 Amps independent with 2.5 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

S&F switch piano flush type/Bell push, 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F socket 3/ 5 pins, 6 Amp, flush type piano (multi purpose) 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F Socket 15 Amps flush type,3/ 6 Pin, 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F Ding Dong door bell 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F Bell push flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm, three terminals, 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F stepped type electronic fan regulator flush type 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F Batten holder PVC/Polycarbonate base / back suitable for LED lamp. 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.

S&F LED Bulbs 9/10W B-22 Pin type 230 Volts , AC completeall as specified and directed by Engineer-in-Charge.

S& F PVC Combination Box type complete with switch & socket 5/6 Amp ,230 Volts , AC completeall as specified and directed by Engineer-in-Charge.

S& F PVC Combination Box type complete with switch & socket 15/16 Amp. 230 Volts , AC completeall as specified and directed by Engineer-in-Charge.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 amps MCB complete all as spec ified and directed by Engineer-In-Charge.

S&F Skylite recess mounting,36W, LED 2'x2' luminaire integrated electronic driver, optics diffused, complete including electrical connection with copper cable from ceiling rose to fittings and taking down old Unserviceable light fittings of any type and any size complete all as specified and directed by Engineer-in-Charge.

S&F LED tube light fittings 20W (4 feet) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings all as directed by Engineer-in-Charge.

S&F LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down existing fittings all as directed by Engineer-in-Charge.

S&F LED bulkhead luminaire 10W decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings all as directed by Engineer-in-Charge.

S&F LED building secuity light 25 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings all as directed by Engineer-in-Charge.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC casing caping and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed by Engineer-in-Charge. Note:- Cost making good disturbed surface below existing point wiring taken out vide item No 46 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring vide item No 46 as applicable shall be deemed to be included in the unit rate quoted against these items.

S & F in repairs single pole and neutral sheet metal enclosures for Distribution board (DB's)suitable for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed by Engineer-in-Charge.

All as per item No 124 above but 8 ways complete all as specified and directed by Engineer-in-Charge.

S&F RCBOs for earth leakage,over load & short circuit protection 2 pole ,25 Amp rating, 300 mA capacity suitable for 240 Volts and including taking down existing MCB/ RCCB complete all as specified and directed by Engineer-in-Charge.

S&F MCB SPN 40-63 Amps 240V incl all termnials, fitting etc. including taking down complete all as specified and directed by Engineer-in-Charge.

S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting etc including taking down complete all as specified and directed by Engineer-in-Charge.

M&L for rewinding of exhaust fan of size 250 to 400 mm sweep Including Taking down ,dismantiling, opening ,descaling, adjustment, re fixing , cleaning, greasing, painting, replacing minor spares (ie nut, bolt,washers) and rewinding with proper size enamelled copper wire warnishing (spares mentioned below will be measured and paid separatelly) complete all as specified and directed by Engineer-in-Charge.

All as per item No 129 above but Ball bearing complete all as specified and directed by Engineer-in-Charge.

All as per item No 129 above but Brass bushes complete all as specified and directed by Engineer-in-Charge.

All as per item No 129 above but Exhaust fan louvers complete with nut & bolts etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 129 above but Exhaust fan blade of any sweep with screws/bolts, nuts complete all as specified and directed by Engineer-in-Charge.

M&L for rewinding of Ceiling fan , Air circulator & wall mounted fans of any size any sweep and any capacity of fans using super enameled copper conductor of suitable gauge including insulation varnishing, packing including taking down and refixing the fans in original position complete all as specified and directed by Engineer-in-Charge. (Note: spares mentioned below will be measured and paid separatelly)

All as per item No 134 above but Ball bearing complete all as specified and directed by Engineer-in-Charge.

All as per item No 134 above but Brass bushes complete all as specified and directed by Engineer-in-Charge.

All as per item No 134 above but 2.5 to 4.0 mfd capacitor complete all as specified and directed by Engineer-in-Charge.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed by Engineer-in-Charge.

M&L in replacement for 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm GI suspension wire, one twin core cable flat or circular of size 10 sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

M&L in replacement for 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm GI suspension wire, one twin core cable flat or circular of size 16 sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

36SHRI RADHEY ASSOCIATES

NAVEEN KUMAR TYAGI

RRR CONSTRUCTIONS

Singh Associates

High Tech Metal India