REWEAVING/RECANNING OF FURNITURE AT FURNITURE YARD OF JAIPUR MIL STN

Amount

Chair Dining (1.01 to 1.06) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed . Drag No FD 228, 262, 270 & 279.

Stiffener

Front/Side/ rear rail

Back Support

Front leg

Rear leg

PVC Shoes (4 nos in one chair)

Chair writing (2.01 to 2.6) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. Drag No FD 280

Stiffener

Front/Side/ rear rail

Back Support

Front leg

Rear leg

PVC Shoes (4 nos in one chair)

Chair easy (3.01 to 3.04) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. Drag No FD 201 & 229

Front/rear leg

Front/Side/ rear rail

Hand rest

PVC Shoe (4 nos in one chair)

Stool dressing CB (4.01 to 4.06) : Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed. Drag No FD 252 & 282

Centre stiffener

Side stiffener

Front/ rear rail

Side rail

PVC Shoe

Chair Varandah (5.01 to 5.05) Drag No FD 256 & 359

M&L welding to chair verandah where required and filling properly at places of welding point. Welding shall be done all round the conduit pipe and all welding and filling at one broken point shall be measured as one point ie one unit.

M&L 04 nos of hard rubber toe in legs of chair verandah including removal of broken rubber toe.

M&L scrapping of surface of chair verandah frame with emery paper making smooth surface and applying one coat of white synthetic enameled paint all as directed.

Removing of old unserviceable nylon newar and M&L reweaving of chair verandah with, 50 to 55mm wide light colour new nylon newar of superior and approved quality not recycled and weight not less than 0.50 kg per chair closely woven both side in seat and back complete.

Removing of old unserviceable plastic cane from chair verandah and M&L reweaving of chair verandah with plastic cane ½ round, 4mm wide, 0.40mm thick with superior and approved quality closely woven.

Polishing description (for 6.01 to 6.05) : M&L preparation of wooden surfaces by cleaning, scrapping through electric grinder and smoothing of surfaces with sand paper and applying one coat of French polish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing

Chair dining wooden. Drag No FD 228 & 262

Chair writing wooden. Drag No FD 280

Chair easy wooden. Drag No FD 201 & 229

Stool dressing CB. Drag No FD 252 & 282

Bin soil linen. Drag No FD 212 & 244

Recanning description (for 7.01 to 7.06) : M&L Re-canning with plastic cane of ½ round 2.0mm wide & 0.40mm thick, woven in Godrej pattern and border around and back with 4mm wide of approved quality (white/cream in colour) including removing of old canning.

Chair dining wooden. Drag No FD 228, 262, 270 & 279

Chair writing wooden. Drag No FD 280.

Chair easy seat only. Drag No FD 201 & 229

Chair easy back only.

Stool dressing CB. Drag No FD 252 & 282

Bin soil linen. Drag No FD 212 & 244

Chair CB Steel with/without arms (8.01 to 8.08)

Taking out old unserviceable seat frame of chair CBA steel with Arms and S&F new black painted seat frame 2nd class hard wood duly weaving with white/cream plastic cane 2mm to 2.5mm wide partially rounded off of approved quality Godrej pattern cross band and border as specified in drawing including fixing with MS nut and bolt with washer, size of seat frame as per drg. Drag No FD 75M

All as per Item No 8.01 above but back frame of chair CB steel with arms size as per drg. Drag No FD 75M

All as per Item No 8.01 above but seat frame of chair CB steel without arms size as per drg. Drag No FD 75M

All as per Item No 8.01 above but back frame of chair CB steel without arms size as per drg. Drag No FD 75M

S&F black painted hand rest of Chair CB Steel with arms size as per drg. Drag No FD 75M

M&L welding of 4 nos of clits of 3mm thickness to support seat frame of Chair CB steel with or without arms. Drag No FD 75M

M&L scrapping of surface of chair CB steel with arm by emery paper making smooth surface and applying one coat of olive green synthetic enameled paint all as directed. Drag No FD 75M

M&L scrapping of surface of chair CB steel without arm by emery paper making smooth surface and applying one coat of olive green synthetic enameled paint all as directed. Drag No FD 75M

Repairs to Charpoy GI. Drag No FD 220

Tightening of elbow, check nut, removing of unserviceable nylon newar and M&L reweaving of charpoy GI pipe with 50mm to 55mm wide non recycled nylon newar of light colour, closely woven both side.Weight of newar shall not less than 1.50 Kgs per charpoy as directed.

Removing of old long rail of Charpoy GI Pipe and supply and fix new long rail of 32mm dia GI pipe medium grade duly threaded both sides as required. Drg No FD-220 Note : 1. Old long rail as retrieved shall be used for converting short rail under item No 9.03 and charges for converting is included in unit rate of item No 9.03 here-in-after. 2. GI pipe shall be arrange by the contractor and pipe shall be ISI marked.

Conversion of long rails of Charpoy GI Pipe (retrieved under item No 9.02) into short rail by cutting/finishing to shape and threading and replacing the same as required against unserviceable short rail. Drg No FD-220 Note : Old short rail retrieved shall be used for converting the leg under item No 9.04 and charges for converting is included in the unit rate of item No 9.04 here-in-after.

Conversion of short rails of Charpoy GI Pipe (retrieved under item No 9.03) into leg rail by cutting/finishing to shape and threading and replacing the same as required against unserviceable short rail.Drg No FD-220.

Removing old elbow from Charpoy GI Pipe and S&F 32mm bore medium grade GI elbow, 3 ways ISI marked complete all as directed. Drg No FD-220

Removing old check nut from Charpoy GI Pipe and S&F new check nut 32mm bore, 6mm thick galvanised iron medium grade complete all as directed. Drg No FD-220

Schedule of Credit

B.S Constructions

F.M. KHAN SONS

Shri Gajanand Enterprises

L.BHIMSEN

GLOBAL ENGINEERS AND INNOVATORS

SK INDUSTRIES