Construction of Multipurpose Hall for sports activities at HAL Korwa.

Hindustan Aeronautics Limited

(Avionics Division, Korwa)

DEPARTMENT OF CIVIL ENGINEERING

CHECK LIST FOR SUBMITTING E-TENDER

NAME OF WORK:-Construction of Multipurpose Hall for sports activities at HAL Korwa, Amethi (Civil and Electrical Works)

NIT No.- HAL/KWD/Civil/19 of 26-27 Date: 06.10.2026

Name of Contractor:

S. N. Essential Criteria /Desirable criteria. Please write submitted or not submitted below

1 ANNUAL TURN OVER:- Average Annual Turnover during the last 3 years, ending 31st March-2026 (Provisional certificate is acceptable) of previous financial year, should be at least 30% of the approximate estimated amount put to tender. The Bidder should upload profit & loss statement for the last three years duly certified by Chartered accountant with UDIN. (Supported with Income Tax return, Balance Sheet etc.).

2 EMD (As per NIT)

3 SOLVENCY CERTIFICATE- Solvency certificate from any nationalized or scheduled bank i.e.minimum 40% of Estimated value.

4 EXPERIENCE: Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following.

5 Three similar completed works each costing not less than the amount equal to 40% of the approx estimated amount. OR

i) Two similar completed works each costing not less than the amount equal to 50% of the approx estimated amount. OR

ii) One similar completed work costing not less than the amount equal to 80% of the approx estimated amount.

6 BID CAPACITY:- The Bid Capacity shall be worked out for the works costing above Rs. 100.00 Lakhs and above as one of their eligibility criteria

7 LICENSE: License for execution of Electrical works from the concerned authorities / organizations/ bodies.

8 Proof of GST registration

9 Copy of PAN/ GIR No. Registration Certificate issued by Income Tax Authority.

10 Constitution and legal status.( Partnership/ Proprietary)

11 Details of Bank name , brance code, address, IFS code and Account number on letter head.Please attach scanned copy of blank cheque for reference.

12 The rate quoted shall be inclusive of all taxes. Tenderers are required to make the DATA ENTRY of the item rate in figures only and rate in words will be automatically generated.

13 Tenderers are required to attach Format of undertaking as per Annexure I & J

14 Signature done, wherever required.

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

Time Required for

(a) Conclusion of contract- 03month

(b) Completion of works- 12 Months

Sl. No. Particulars Amount In Rs. Reference

1 Term contract for civil maintenance works in township for repair & maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc and allied civil works required for completion of work.

a Civil Works #REF! [Annexure- D-1]

2 Add 5% towards contigencies #REF!

Grand Total #REF!

Say ` 14.07 Lakhs

Sr. Manager (Works ) ATA

(Satyendra K Maurya) (SK Chaudhury)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

1 SCHEDULE - "A" (PART-A) #REF!

2 SCHEDULE - "A" (PART-B) #REF!

Contingency @ 5% #REF!

Grand total #REF!

SAY : 14.07 Lakhs

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Name of Work:- Construction of Multipurpose Hall for sports activities at HAL Korwa, Amethi (Civil and Electrical Works)

NIT No: HAL/KWD/Civil/19 of 26-27

Note:- Tenderers are requested to quote their offer in percentage either above or below on CPWD DSR-2023 Volume I & II (Rates). All relevant items shall be executed as per CPWD specifications and CPWD DSR 2023, materials specifications shall be as mentioned in the Bill of quantities and as per the List of approved make/brand as provided in tender document and as per the direction of Engineer-in-charge.

NAME OF AGENCY (To be filled in highlighted box ) :

Sl. No. Description of item Qty. Unit Rate derived excluding GST @18% & BOCW@1% Amount excluding GST @18% & BOCW@1% in ( Rs.)

PART-A- CIVIL WORKS

1.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m for All kinds of soil all complete as per specification and direction of EIC. 187.00 Cum 131.68 24624.16

1.2 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 0.00

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration all complete as per specification and direction of EIC. 688.00 Sqm 230.02 158253.76

1.3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth ,consolidating each deposited layer by ramming and watering including lead upto 50m and lift upto 1.5m all complete as per specification and direction of EIC. 121.00 Cum 145.41 17594.61

1.4 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. all complete as per specification and direction of EIC. 97.00 Cum 519.68 50408.96

1.5 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing etc. all complete as per specification and direction of EIC. 64.00 Cum 1575.54 100834.56

2.1 Providing mixing and placing Plain Cement Concrete : 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, manholes, road, chambers, duct etc with mechanical mixing including form work, side shuttering, compaction, curing also including , materials, labour, cartage, T&P etc, required for proper completion of the work as per specification and direction of E.I.C. 63.00 Cum 5053.61 318377.43

2.2 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone- III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth etc. all complete as per specification and direction of EIC. 29.00 Sqm 555.88 16120.52

2.3 Providing and fixing glass strips (40x4)mm in joints of terrazo/ cement concrete floors, all complete including , materials, labour, cartage, T&P etc, required for proper completion of the work as per specification and direction of E.I.C. 26.00 RM 68.07 1769.82

2.4 Providing mixing and placing Cement Concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished 40 mm thick with 20 mm nominal size stone aggregate with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. with mechanical mixing including form work, side shuttering, compaction, curing also including , materials, labour, cartage, T&P etc, required for proper completion of the work as per specification and direction of E.I.C. 494.00 Sqm 455.66 225096.04

3.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete including all complete as per specification and direction of EIC. (All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum) 53.00 Cum 7051.28 373717.84

3.2 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete including , materials, labour, cartage, T&P etc, required for proper completion of the work as per specification and direction of E.I.C. (All works above plinth level upto floor V level .Concrete of M25 grade with minimum cement content of 330 kg /cum) 80.00 Cum 7315.13 585210.40

3.3 Providing, fabricating, fixing and removing Form work / shuttering of side of concrete in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, including working scaffoldings, ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period as described in IS:456-2000 , etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 0.00

a Footings 114.00 Sqm 290.92 33164.88

c Lintels, beams, plinth beams, girders, bressumers and cantilevers 340.00 Sqm 546.31 185745.40

d Suspended floors, roofs, landings, balconies and access platform 161.00 Sqm 687.90 110751.90

3.4 Providing, laying and fixing TMT reinforcement bars conforming to IS-1786-1985, for any diameter of TISCON / SAIL/ RINL/Gallant or any other approved make for all type of R.C.C works including straighting, cut to length, bend to shape required, cranking, bending spirally or hooping, spacers / chairs, wastages and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it (RCC) also including cost of all labour, material, cartage, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C 11630.00 Kg 80.01 930516.30

3.5 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) including cost of all labour, material, cartage, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C. 49.00 Sqm 304.80 14935.20

3.6 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification all complete works as per specification and direction of EIC. 13.00 Kg 13.72 178.36

3.7 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including cost of all labour, material, cartage, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C. 49.00 Sqm 108.42 5312.58

4.1 Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand (zone-III) derived from natural sources) in foundation and plinth, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved including cost of all material, labour, cartage, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 23.00 Cum 5291.20 121697.60

4.2 Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand (zone-III) derived from natural sources) in superstructure above plinth level upto floor V level or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved including cost of all material, labour, cartage, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 199.00 Cum 6755.42 1344328.58

4.3 Providing and laying Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand (zone-III) derived from natural sources) in superstructure, above plinth upto floor V level including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, cartage, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 8.00 sqm 833.71 6669.68

5.1 Providing and fixing M.S. Tubular frames for doors and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1 :3:6 (1 Cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) , fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer including all material, labour, cartage, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 2154.00 kg 144.81 311920.74

5.2 Providing , fabricating and fixing M.S. frames for doors, windows and ventilators, MS grill, grating, railing made out from MS square sections, M.S. angles and M.S. flats as per design, electrically welded and fixed in chowkhats with screws or treads of steps including fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1 :3:6 (1 Cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including labour, material, cartage & T&P, grinding etc. all complete, as per drawing, specification and direction of EIC. 368.00 kg 97.22 35776.96

5.3 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. fixed to steel windows by welding including priming coat with approved steel primer including all labour, material, T&P, transportation, wastage for proper completion of work as per specification and direction of EIC. 643.50 kg 162.54 104594.49

5.4 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws including all labour, material, T&P, transportation, wastage for proper completion of work as per specification and direction of EIC. 33.00 Sqm 1775.03 58575.99

5.5 Providing and fixing fly proof galvanized M.S. wire auge(Mosquito jali) to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 12 mm mild steel U beading including all labour, material, T&P, transportation, wastage for proper completion of work as per specification and direction of EIC. 5.00 Sqm 696.76 3483.80

5.6 Providing and fixing 125 mm aluminium handles, ISI marked, anodised transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of EIC. 36.00 Nos 49.15 1769.40

5.7 Providing and fixing aluminium sliding door bolts 250X16mm, ISI marked anodised transparent or dyed to required colour or shade, with nuts and screws etc. all complete as per specification and direction of EIC. 10.00 Nos 193.33 1933.30

5.8 Providing and fixing aluminium tower bolts 150 X10 mm ISI arked, anodised transparent or dyed to required colour or shade, with necessary screws etc. all complete as per specification and direction of EIC. 36.00 Nos 61.24 2204.64

5.9 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4 mm thick glass panes all complete including labour, material, cartage, T&P etc. as per specification and direction of EIC. 23.00 Sqm 789.83 18166.09

5.1 Providing and fixing aluminium hanging floor door single rubber stopper ISI marked anodised transparent or dyed to required colour and shade with necessary screws etc. all complete including labour, material, cartage, T&P as per direction of EIC. 18.00 Nos 29.38 528.84

5.11 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requ ired including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Powder coated aluminium (minimum thickness of powder coating 50 micron) 76.00 Kg 393.86 29933.36

5.12 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) 32.00 Kg 470.68 15061.76

5.13 Providing and fixing float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): 11.00 Sqm 1116.70 12283.70

5.14 Providing & fixing fly proof wire gauze Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. including labour, material, cartage, T&P etc. as per specification & directions of Engineer-in-charge. 5.50 Sqm 840.95 4625.23

6.1 Providing & laying Vitrified ceramic tiles of first quality of size 600 x 600 mm on floor of approved shade & brand like Kajaria/ Johnson/ Somany or as approved, grouting of tiles with neat cement slurry @ 3.30 kg/Sqm and joints finished with matching colour pigment and epoxy solution including cleaning of existing surface with acid after roughening of surface/hacking of surface with suitable tools also providing bedding layer 20 mm (Av. thickness) in c.m. 1:4 (1cement, 4coarse sand) and finally cleaning of surface with soft cloth including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 315.00 Sqm 1152.46 363024.90

6.2 Providing and laying 20-25 mm thick machine cut Kota stone slab in flooring of size approx 450 x 450 mm size or as per site requirement , over 20 mm (avg.) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) jointed with gray cement slurry mixed with pigment to match the shade of stone slabs, including cost of rubbing, grinding & mirror finish polishing etc. including cost of labour, material, T&P, wastages etc. works at all height / depth etc all complete as required and directed by EIC. 66.00 Sqm 1746.56 115272.96

6.3 Providing and fixing Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment (Medium shade pigment using 50% white cement, 50% ordinary cement) to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) including labour, material, cartage, wastage, T&P etc all complete as per specification & direction of EIC. 7.00 Sqm 1100.64 7704.48

7.1 Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand (zone-Ill) derived from natural sources) on walls, darins, manholes, ducts etc of fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 1150.00 Sqm 254.94 293181.00

7.2 Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand (zone-Ill) derived from natural sources) on walls, darins, manholes, ducts etc of rough / fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 1150.00 Sqm 293.30 337295.00

7.3 Providing, rendering, dubbing out cement plastering 6 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand (zone-Ill) derived from natural sources) on fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 152.00 Sqm 222.89 33879.28

7.4 Providing and making plaster drip course/ groove in plastered surface or moulding to R.C.C. projections with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC. 43.00 RM 58.16 2500.88

7.5 Providing & applying approx. 1 mm thick wall care putty of make birla, berger , ACC or approved make with a coat of wall primer of approved brand to give a smooth & even finish at all floors on walls / ceilings or any description of works including preparation of surface smooth & even, filling holes / minor pits all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of E.I.C 2300.00 Sqm 115.77 266271.00

7.6 Providing & applying two or more coats of weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield max of ICI etc on new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) including preparation of surfaces by sand papering where required, filling holes /Cracks with birla putty / snowfilla, all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of E.I.C 1732.00 Sqm 119.14 206350.48

7.7 Providing & applying two or more coats water proofing cement paint of required shade applied @ 3.84 kg/10 sqm) on new work of first quality of approved shade and make like apex of Asian, Berger etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of E.I.C 720.00 Sqm 86.72 62438.40

7.8 Providing & applying two coats of super synthetic enamel painting on wood / steel / wall surface over a coat of wood/ steel/ wall primer for any description of works of approved shade, make such as Asian / Berger / ICI of first quality including preparation of surface with Putty filling in cracks, holes etc wherever required, at any height / depth or any descripiton of works at all floors including all labour, material, T&P ,scaffolding all complete as per specification and direction of E.I.C. 348.00 Sqm 167.85 58411.80

8 Providing , fabricating and fixing Steel work in built up hot finished wlded type tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers, MS plates, MS angles, MS flat etc., labour, material, T&P, cartage and grinding etc. all complete, as per drawing, specification and direction of EIC. 6377.00 Kg 153.08 976191.16

9 Providing & fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steet sheet 0.50mm thick in horigantal/vertical in roof covering / cladding to wall, fixed with self drilling and self tapping screws as specified by manufacturar of any approved colour and quality of make National/TATA/ Bhushan/Jindal or as approved by EIC. The minimum end lap of sheet should not be less than 150 mm or as per manufacturer instructions and the minimum side lap of sheet should be as per manufacturer instructions or direction of EIC .The sheet shall be supplied as per site requirement to suit site dimensions. including cutting, wastage , all necessary L or J hooks where required, bitumenous cup and washer etc. with all labour , material, T&P, safety arrangements, scaffolding etc. all complete as per specification and direction of EIC. 558.00 Sqm 547.98 305772.84

10 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge. With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles 265.00 Sqm 1637.31 433887.15

11.1 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed including all complete works as per specification and direction of EIC. 0.00

with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. (d) Finishing the surface with 20 mm thick 0.00

jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. 95.00 Sqm 1249.75 118726.25

11.2 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. 2.00 Each 221.26 442.52

11.3 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase In 75x75 mm deep chase 40.00 metre 226.38 9055.20

12 Demolishing brick work manually/ by mechanical means built In lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 150.00 Cum 631.70 94755.00

13 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below including labour, T&P etc. as per direction of EIC. 30.00 Nos. 272.41 8172.30

14 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 50 metres lead. Including labour, T&P, scaffolding, safety arrangement etc all complete as per direction of EIC. 4555.00 Kg 4.19 19085.45

15 Dismantling of G.S. Sheet roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead Including labour, T&P, scaffolding, safety arrangement etc all complete as per direction of EIC. 615.00 Sqm 122.37 75257.55

PART-B- ELECTRICAL WORKS (Internal Wiring) 0.00

1 Group C' Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.(Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green) 45 Point 1431.93 64436.97

2 Group C' Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. 25.00 Point 835.29 20882.35

3 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 8.00 Each 337.82 2702.52

4 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 8.00 Each 39.50 315.97

5 Supplying and fixing 1 or 2 Module (75mmX75mm) size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 10 Each 297.48 2974.79

6 Supplying and fixing modular Telephone socket outlet with GI box, modular plate & modular plate cover etc. including connections as required. 10 Each 141.18 1411.76

7 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 6.00 Each 457.98 2747.90

8 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required 6 Each 553.78 3322.69

9 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve Anchor/Havells/L&T/Legrand/GM/ABB make including connections, painting etc. as required. 7 Each 678.15 4747.06

10 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 75 Meter 224.37 16827.73

11 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 75 Meter 261.34 19600.84

12 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 115.00 Meter 313.45 36046.22

13 Wiring for circuit/ submain wiring alongwith earth wire with the 2 X 6 sq. mm + 1 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 78 Meter 405.04 31593.28

14 Wiring for circuit/ submain wiring alongwith earth wire with the 4 X 6 sq. mm + 2 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 25 Meter 683.19 17079.83

15 Wiring for circuit/ submain wiring alongwith earth wire with the 4 X 10 sq. mm + 2 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 25 Meter 905.88 22647.06

16 Supplying and drawing 2 pair 0.5 mm dia FRLS/HFFR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 18 Meter 32.77 589.92

17 Supplying and fixing of 20mm sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 18 Meter 126.89 2284.03

18 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 15.00 Each 87.39 1310.92

PART -B- SUBHEAD - II - FITTINGS & FIXTURES 0.00

19 Supplying, installation, Testing & Commissioning of 36W Panel light 2x2 ft., of Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freqency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 10.00 Each 2107.56 21075.63

20 Supplying, Installation, Testing & Commissioning of 36W LED surface mounted Batten light of Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 10.00 Each 569.75 5697.48

21 Supplying, Installation, Testing & Commissioning of 100W Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 20.00 Each 1904.20 38084.03

22 Supply, Installation, Testing and Commissioning of 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies,shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as above, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 6.00 Each 2264.71 13588.24

23 Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. 10.00 Each 126.89 1268.91

24 Installation, Testing and Commissioning of pre-wired, fluorescent fitting / compact fluorescent/ LED fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. as required. 6.00 Each 217.65 1305.88

25 Installation, Testing and Commissioning of exhaust fan(upto 450mm sweep) in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 6.00 Each 467.23 2803.36

PART -B- SUBHEAD - III - DISTRIBUTION BOARDS 0.00

26 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 0.00

27 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 0.00

28 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

28.1 Single pole 20.00 Each 239.50 4789.92

28.2 Triple pole 2.00 Each 899.16 1798.32

29 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 4.00 Each 11.76 47.06

30 Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 3.00 Each 1517.65 4552.94

31 Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 3.00 Each 3662.18 10986.55

PART -B- SUBHEAD - IV - CABLE AND CABLE TRAY ETC. 0.00

32 Supply of XLPE Cable size 4CX35 sq. mm 1100 V grade XLPE insulated and PVC sheathed steel armoured Aluminium conductor cable. 70.00 Meter 412.09 28846.47

33 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 4CX35Sqmm. size (clamped with 1mm thick saddle) on cable tray as required. 25.00 Meter 44.54 1113.45

34 Supply of XLPE Cable size 4CX70 sq. mm 1100 V grade XLPE insulated and PVC sheathed steel armoured Aluminium conductor cable. 80.00 Meter 504.20 40336.13

35 Laying of one number PVC insulated and PVCsheathed / XLPE power cable of 1.1 KV grade of 4CX70 sq. mm direct in ground including excavation,sand cushioning, protective covering and refilling the trench etc as required. 25.00 Meter 399.16 9978.99

36 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 18.00 Meter 633.61 11405.04

37 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 15.00 Meter 892.44 13386.55

38 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 16.00 Each 1052.10 16833.61

39 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 8.00 Each 1661.34 13290.76

40 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Tee"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 4.00 Each 1199.16 4796.64

41 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Tee"(galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 4.00 Each 1927.73 7710.92

42 Supplying and installing 100 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Cross member" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 8.00 Each 1199.16 9593.28

43 Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray "Cross member" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc as required. 10.00 Each 2111.76 21117.65

44 Supplying and making end termination with brass compression gland and aluminium lugs for 4C X 35 sq. mm (28mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4.00 Each 368.07 1472.27

45 Supplying and making end termination with brass compression gland and aluminium lugs for 3.5C X 70 sq. mm (38mm)) size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 5.00 Each 455.46 2277.31

46 Providing, laying and fixing 100MM dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required 30.00 Mtrs. 1611.76 48352.94

PART -B- SUB HEAD - V - EARTHING

47 Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 4.00 Each 6435.29 25741.18

48 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 25.00 Mtr 634.45 15861.34

49 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 35.00 Mtr 241.18 8441.18

50 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 40.00 Mtr 70.59 2823.53

Total (Civil +Electrical) 9856601.90

Contractor shall quote only numerical value of percentage either Above or Below in highlighted Cell on Total % 0.00

Add BOCW @ 1% on sub total 98566.02

Add GST @18% on sub total 1774188.34

Total Quoted value including GST @18% & BOCW @1% 11729356.00

Annexure-D (Para 4.6.4)

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2023-24. (For One years)

Time Required for

(a) Conclusion of Contract - 03 months

(b) Completion of works- 12 months

Sl. No. Particulars Amount in Rs. Reference

1 Term contract for civil maintennace works in Township for repair and maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc. and allied civil works required for completion of work.

(a) Civil Works (Paer: A+Part: B) #REF! [Annexure-D-1]

Grand Total #REF!

Say Rs. #REF! Lakhs

Manager (Works) ATA

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 166.94 3.3388 167 3.34 150 3.00 208.675 125.205 4.1735

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 176.69 14.1352 198 15.84 190 15.20 220.8625 132.5175 17.669

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 166.94 1.6694 181 1.81 160 1.60 208.675 125.205 2.08675

Rebate offered (in %age) if any 2.00

Status of Parties L-2 L-1 9.380172329

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

SCHEDULE - 'A' Part 'B'

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil/21 of 2013-14

PART 'B' NON MES ITEMS

S.N Description of Items Qty. Unit As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (2/2) Freak Rate

Rate in figure ( Rs.) Rate in words ( Rs.) Amount in ( Rs.) Rate (In Rs.) Amount Rate (In Rs.) Amount

1 Supply and stacking of coarse sand such as Banda/ Chopan including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 65.00 Cum 1970.00 #NAME? 128050.00 2600.00 169000.00 2300.00 149500.00 - 2462.50 1477.50 56.62514156 70.76139258 65.34090909

2 Supply and stacking of Ist class bricks class 'A' at directed place inside Factory or Township area including all labour, material, transportation, loading, unloading, wastage , T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 2000.00 Nos 8.00 #NAME? 16000.00 7.50 15000.00 7.00 14000.00 - 10.00 6.00

3 Supply and stacking of 12.5 mm graded stone aggregate of bharatkoop/ Dala quarry including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 10.00 Cum 2408.00 #NAME? 24080.00 2400.00 24000.00 2500.00 25000.00 - 3010.00 1806.00

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 154 3.08 167 3.34 165 3.30 192.5 115.5 3.85

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 163 13.04 198 15.84 200 16.00 203.75 122.25 16.3

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 154 1.54 181 1.81 180 0.00 192.5 115.5 1.925

Rebate offered (in %age) if any 2.00

Total Amount (Part-B) 168130.00 208000.00 188500.00

Total Amount (Part A+Part B) 0.00 1268130.00 1557858.16 1373606.38

Status of Parties L-2 L-1

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya