Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAdmitted-Finance 1270 VPO BALIYALI 127032 | BHIWANI | HARYANA | 127032 | ₹8.3 L | L1 | Admitted-Finance |
| 2 | L2₹9.4 LAdmitted-Finance UKLANA MANDI HARYANA | ₹9.4 L | L2 | Admitted-Finance |
| 3 | L3₹5.3 LAdmitted-Finance HOUSE NO 42 AGGARSAIN COLONY HISAR 125001 | HISAR | HARYANA | 125001 | ₹5.3 L | L3 | Admitted-Finance |
| 4 | L4₹6.2 LAdmitted-Finance 299 MODEL TOWN ADAMPUR HISAR HARYANA 125052 | HISAR | HARYANA | 125052 | ₹6.2 L | L4 | Admitted-Finance |
| 5 | Rejected-Technical VPO DATTA HISAR | HISAR | HARYANA | 125001 | - | - | Rejected-Technical Not qualified in technical bid |
| Sl No | Description | Qty | Unit | M/S KHATTU INTERNATIONAL L3 | The Adampur Goodluck Coop. L&C Society Ltd. Adampur L4 | the uklana mandi co op l and c society L2 | Rohtash S/o Ghanshyam L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Multistation with size 27*15*13ft with 1 Nos Climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 feet long Spiral Slider of 6mm thick, 10 ft Long Wave Slider of 6mm thick, Tunnel 5 Ft Long of 4mm thick Etc. with 3` sq.pipe, 1.6` sq.pipe, 3`*1` sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom. | 1 | Each | 1,59,500 ₹1,59,500 | 1,59,500 ₹1,59,500 | 1,54,500 ₹1,54,500 | 1,30,000 ₹1,30,000 |
| 2.00 | SEE SAW Providing and fixing Deluxe Playways Industries Blow moulding Indoor Fun See Saw complete in all respect as per satisfaction of engineer in charg | 1 | Each | 26,786 ₹26,786 | 25,000 ₹25,000 | 25,400 ₹25,400 | 25,000 ₹25,000 |
| 3.00 | Power Push Chair:- Providing, designing and fixing of Pull pair of size 2500 X 800 x 2000 mmfabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and seif lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc | 1 | Each | 25,000 ₹25,000 | 25,000 ₹25,000 | 24,300 ₹24,300 | 25,000 ₹25,000 |
| 4.00 | Triple Twister :- Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding Joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc | 1 | Each | 25,000 ₹25,000 | 25,000 ₹25,000 | 24,800 ₹24,800 | 25,000 ₹25,000 |
| 5.00 | Double Cross Walker :- Providing, designing and fixing Double Cross Walker of size 1600 X 600 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc. | 1 | Each | 25,000 ₹25,000 | 25,000 ₹25,000 | 24,900 ₹24,900 | 25,000 ₹25,000 |
| 6.00 | Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in- Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and | 1 | Each | 25,000 ₹25,000 | 25,000 ₹25,000 | 23,500 ₹23,500 | 25,000 ₹25,000 |
| 7.00 | Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated | 1 | Each | 39,000 ₹39,000 | 35,000 ₹35,000 | 37,800 ₹37,800 | 39,000 ₹39,000 |
| 8.00 | Chain swing | 1 | Each | 14,000 ₹14,000 | 14,000 ₹14,000 | 13,550 ₹13,550 | 14,000 ₹14,000 |
| 9.00 | Providing and fixing of a Garden Hut (Octaganal One Side Length 9` ) Outer Side Hight 8` Center Hight 11` Complete | 1 | Each | 1,45,695 ₹1,45,695 | 1,40,000 ₹1,40,000 | 1,39,800 ₹1,39,800 | 1,30,000 ₹1,30,000 |
| 10.00 | Supply and Erection of Decorative pole Lotus shall be made of Mild Steel 4mtr. height with die cast embellishments and double arms decorative bracket of predefined design to hold the street light of 60W each. Pole shall be made out of Mild Steel Pipe having 76mm x 3mm x 1000mm at Top, 90mm x 3.2mm x 2000mm mid and bottom base of decorative die cast with base plate of size 500mm x 500mm x 10mm. Queen light fixture shall be made of die cast aluminium base and top with crown shaped ring. The top of the fixture is combined with bottom through extruded aluminium hollow
arms. The complete fixture gives a royal finish of the tradition era. Pole having Provision for inside termination box with 4way connector and 1 Nos 6 Amps MCB for local isolation as per direction of electrical standard. Entire pole, light and decorative brackets should be painted with proper zinc primer and Polyurethane powder coat/paint Pole is inclusive of 60-watt LED Post top with luminous flux 5400lm luminaire efficacy 90lm/w, IP65, CCT:3000K/4000K/6000K as required by project, CRI)70, Maintenance of lumen 50,000hrs. @ L70, operating temp. 0 to plus 40oC, Input voltage 140 to 270VAC, 50Hz. The decorative pole is suitable for outdoor lighting application. Pole is complete in all aspects with all accessories without fou | 1 | Each | 50,000 ₹50,000 | 1,50,000 ₹1,50,000 | 4,67,777 ₹4,67,777 | 3,95,000 ₹3,95,000 |
Tender Value
₹27.9 L
EMD Value
₹55,700
Closing Date
5 Jan 2026, 5:00 pmClosed
SH ANIL MOHIL
Municipal Committee Barwala
Development of park for person with special abilities situated on Banbhori Road (Devilal Park), MC Barwala.
2025_HRY_493460_1
202513935642 A22A 4321 A3D7 6A7C2EDE7DFD345ULB
Open Tender
Civil Works
150 days
Barwala
Development of park for person with special abilities situated on Banbhori Road (Devilal Park), MC Barwala.
2 documents required · 2 mandatory
₹2,500
Yes
₹55,700
Yes
8 Jan 2026
29 Dec 2025
5 Jan 2026
29 Dec 2025
5 Jan 2026
29 Dec 2025
29 Dec 2025 - 31 Dec 2025
Amount
Multistation with size 27*15*13ft with 1 Nos Climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 feet long Spiral Slider of 6mm thick, 10 ft Long Wave Slider of 6mm thick, Tunnel 5 Ft Long of 4mm thick Etc. with 3` sq.pipe, 1.6` sq.pipe, 3`*1` sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom.
SEE SAW Providing and fixing Deluxe Playways Industries Blow moulding Indoor Fun See Saw complete in all respect as per satisfaction of engineer in charg
Power Push Chair:- Providing, designing and fixing of Pull pair of size 2500 X 800 x 2000 mmfabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and seif lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
Triple Twister :- Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding Joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and UV resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc
Double Cross Walker :- Providing, designing and fixing Double Cross Walker of size 1600 X 600 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.
Arm Wheel :- Providing, designing and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in- Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and
Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated
Chain swing
Providing and fixing of a Garden Hut (Octaganal One Side Length 9` ) Outer Side Hight 8` Center Hight 11` Complete
Supply and Erection of Decorative pole Lotus shall be made of Mild Steel 4mtr. height with die cast embellishments and double arms decorative bracket of predefined design to hold the street light of 60W each. Pole shall be made out of Mild Steel Pipe having 76mm x 3mm x 1000mm at Top, 90mm x 3.2mm x 2000mm mid and bottom base of decorative die cast with base plate of size 500mm x 500mm x 10mm. Queen light fixture shall be made of die cast aluminium base and top with crown shaped ring. The top of the fixture is combined with bottom through extruded aluminium hollow arms. The complete fixture gives a royal finish of the tradition era. Pole having Provision for inside termination box with 4way connector and 1 Nos 6 Amps MCB for local isolation as per direction of electrical standard. Entire pole, light and decorative brackets should be painted with proper zinc primer and Polyurethane powder coat/paint Pole is inclusive of 60-watt LED Post top with luminous flux 5400lm luminaire efficacy 90lm/w, IP65, CCT:3000K/4000K/6000K as required by project, CRI)70, Maintenance of lumen 50,000hrs. @ L70, operating temp. 0 to plus 40oC, Input voltage 140 to 270VAC, 50Hz. The decorative pole is suitable for outdoor lighting application. Pole is complete in all aspects with all accessories without fou
Bidder Name
Amount
M/S KHATTU INTERNATIONAL (GSTN-NA) BID ID -1400503
The Adampur Goodluck Coop. L&C Society Ltd. Adampur (GSTN-NA) BID ID -1400301
the uklana mandi co op l and c society (GSTN-NA) BID ID -1400181
Rohtash S/o Ghanshyam (GSTN-NA) BID ID -1400275
The Adampur Goodluck Coop. L&C Society Ltd. Adampur (BID ID -1400301)
Rohtash S/o Ghanshyam (BID ID -1400275)
the uklana mandi co op l and c society (BID ID -1400181)
the uklana mandi co op l and c society (BID ID -1400181)
M/S KHATTU INTERNATIONAL (BID ID -1400503)
The Adampur Goodluck Coop. L&C Society Ltd. Adampur (BID ID -1400301)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.89 MB
BOQ_571855.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid