quotation for the work of Miscellaneous Interior and Exterior Work at Administration Building in JNPT

Amount

CIVIL & INTERIOR WORKS

Providing and Fixing of Anchor Bolt of 32 mm dia threaded 1.2 m Length for Security Block Foundation and other areas as per structural design of variours sizes, complete as per design and instructions engineer in charge.

Providing and Fixing of 1.25 mm thick GI Deck Sheet for Security Block Roofing procure as per required sizes and span and to lay with ovelap, item to complete with lifting shifting of sheet including fixing with self tapping screw whereever required .

Providing and fixing plywood Laminated panelling, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be covered using 12 mm thick commercial grade plywood as per design. Finished with 1 mm thick approved laminate from sides & top. Edges of laminate to be made smooth. Rate inclusive of necessary Cutouts for switches /lights & other fixtures Basic Rate of laminte Rs. 450/Sqm.

Providing and applying PU polish of required finish to the Veneer Paneling work by spray machine including knotting and preparing the even surface by scraping ,scaffolding if required etc.complete.

Providing and laying Strech Fabric Ceiling which is translucent and can be back lit to be afixed with of aluminium rail the stretch fabric has a composition of a calendared special polyvinyl chloride (free of heavy metals) bearing a thickness of 0.15mm upto 0.35mm weighting upto 350gms/sq cm with a breaking strength of 185kgs/sqm length wise and 200kgs/sq cm width wise with an elongation capacity of 210% along the length and 305% along the width with the hardness of 93.5 shore A with acoustic properties where in the reverbration time at 125/250/500/1000/2000 Hz can be reduced from 1.5 to 0.7s when insulated and designed with perforation on the surface the stretch ceiling can be removable for servicing the lights. Cost to include double Separator with Aluminium box section, if necessary.Cost to include providing and fixing of 150mm deep ply boxing formed with salwood / aluminium frame support from true ceiling as per details . Exposed surface to be finished with white laminate as per details. Support to be taken from true ceiling as per details. Rate to including scaffolding charges as per site conditions.

Providing and Fixing 600 *600 Grid wooden Frame work for Veneer Paneling Work for avoid undulation in panelling, frame to be made out of 50 mm thick wood , to be fixed on existing surface with screw, complete as per Direction by Engineer In--Charge.

Providing and Fixing of 10 to 20 mm Brass Strip in Veneer Panleling as per Drawing or Direction By Engineer In Charge.

Providing and Fixing of 20 to 30 mm Brass Strip in Veneer Panleling as per Drawing. Or as per Direction By Engineer In-Charge.

Providing and Laying of Bondit in POP Punning of Old wall, for proper bonding with all lead & Lift. Or Direction By Engineer In-Charge.

Providing and Applying 150 GSM Geo Textile over the Bitumen membrane along with the bonding chemical application for the bonding purpose for PCC application. Work will be Done as per Direction by Engineer In-Charge.

Providing and applying polyurethane sealant for the Expansion Joint of size 50x25 mm Cleaning the groove , preparing the groove ration using Baker Rod Masking the joint form both the side Applying the primer After desired interval filling the grove Gun Grade Polyurethane sealant, work Will be Done as per Direction by Engineer In-Charge.

Supply & Installation of Double Glazed Glass System for Glazing work at VIP block at Executive terrace, Chairman Cabin, Dy. Chairman cabin etc. for reducing Heat and sound copare to single glazed system, DGU system to have heady duty section in structural glazing form for wind pressure also , complete as per detail design and Instruction engineer in charge.

Providing & applying and mixing One coats of approved ROFF HYSEAL waterproofing compound (Product Code 201), as per the directions below. Surface preparation should include cleaning the surface of all in Toilets are work will be done as per Direction by Engineer In-Charge.

Providing and Fixing of Jaiselmer Stone Leather lapato or Plain Polished approved Finish stone in required design and patterns, skrtting building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as Direction by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent Basic Rate 275 Sqft as per approved drawing and design or Direction by Engineer In-Charge.

Providing and Fixing of Hexagonal Designer Blocks Blaze Cotto tile as per approved Design & Drawing or as per Direction by Engineer In-Charge. Basic Rate 250 Sqft

Providing & Fixing of 18 mm waterproof Ply fixing C type for Courtyard Between Column to Column Soffit Level Matching for Composit Marble Fixing work.

Providing and fixing 8 to 10 mm thick back painted Toughened Glass for Table Top & Wall panelling as per design and site requirment , as per Direction by Engineer In-Charge

Providing and fixing waterproofing to terrace with PU Coating as per Manurfacturere recommendation , item include cleaning, brussing the existing surface with Steel bush, watering to remove all the loose and dust particle , applying manufacturer recommended Chemical as per MOS to cover the entire surface item also includes expansion join of existing nd new building gap with Foam based sealent . Curing the same and testing with interval. Item complete as per instruction EIC.

Providing and laying Polished Granite stone for Planter wall/ Skirting of width Less Than 300 mm in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Provding & fixing Steel High Speed Hand Dryer Supplying of Touch free stainless steel hand dryer Hand Dry Time : Less than 20 Seconds Motor : Brush Type, Dual Ball Bearings Protection Class: IPX1Blowing Volume : > 270 m3/ Air Speed : 95 m/s Basic Rate 15000/-

Providing & Fixing of Toilet Paper Holder in chromium plated finish as per approved sample Basic rate of Rs. 1000/-

Providing & fixing in position robe hooks in toilets as per approved sample basic rate of rs. 400/-

Providing & Fixing of URINAL PARTITION 900*450 { 18mm HPL WITH SS 304, 6 BRACKETS} Use Accessories-Merino Make SS 304 grade Right angle Brackets 304 G ,PVC Wall Plugs as per approve Design and drawing.- Basic Rate - 6500/-

Providing and laying special flamed/ lappatro /Plain pre polished & other finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as Direction by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent Basic Rate 200/Sft

Designing , Providing & Fixing of Chandilear for atrium with all necessary fixture as per Design & Darwing or Direction By Engineer In-Charge Basic Rate of Rs. 450000/-. Item Complete with Fixing of base plate , anchor as per site requuirement.

Designing ,Providing and fixing of Sculpture at security block as per Design & drawing or Direction by Engineer In-Charge Basic Rate 2,75,000/-.

Internal Texture paint : Providing and applying INTERIOR Texture paint of ASIAN PAINT'S GRANIZA or equievatent of approved colour, shade and quality to old/new surfaces including scaffolding, preparing the surfaces etc. complete. (including primer coat and laambi).(Asian, Dulux or equivalent) or as per Direction By Engineer In-Charge.

Providing and fixing of Corian cladding to columns / wall etc as per approved design and drawing in security block & otherarea, with required necessary framing and supports and all lead & Lifts , item to complete jointing the sheet as per OEM menthod and buffing for fine finishing of material to make it look like joint joint free surface, item to complete as per detail design and as per Direction by Engineer In-Charge.

Providing & Fixing of 3 Seater Seating with stone/ wood & Metal as per Design or Direction by Engineer In-Charge. Basic Rate Rs.22000/-

Providing & Fixing in position, Acoustical Panelling made from Fabric wrapped Compressed polyester fibrenonwoven 9mm panelson,50x50mm sal-wood frame of 600x600 cto chaving wooden supports from wall of required length, in front of 1000 gsm synthetic woo l50 mm thick with chicken mesh on wall side ,including cos of requiredCut-Outs, decorative mouldings /finishing-items/paint &Scaffolding ,asper Architectural & Acoustical Design &Instructions &Complete in all aspects.including all materials labour,finishing etc complete

Providing & Fixing of artificial Plant in Office and Internal Planter area. Work will be done as per Direction by Engineer In-Charge.

Providing and fixing SCUBE Restroom cubicles SPLENDOR of following standard which include 750 mm door size (width), made of heat, bacteria water, chemical impact, anti bacterial resistant. 18 mm solid/wood grain Laminate. Finish of the compact laminate should be suede. Which include doors, pilaster and intermediate panel finished with approved textures/shades as per the details drawings & as per IS 2026 (Indian Standard) and as per the fire retardant BS-476/97 Standard. This also details providing and fixing in positions necessary hardware made out of SIZE OF DOOR IS 750MM X 2100MM,SS 304 GRAVITY HINGES,DOOR KNOB CUM HANDLE ALLUMINIUM SS FINISH/ANODIZED FINISH AND SS 304 LOCK CUM HANDLE, D POST CHANNEL FOR FIXING DOORS.( ALLUMINIUM SS FINISH), SS 316/304 SCREW

Supply & Installation of DORMA SG System100 Door Frames 100mm x 30/45mm & Style 70mm x 45mm for door of size 800-900 x 2100 -2450.

Supply & Installation of DORMA SG System100 Door 800-900 X 2100 - 2400 mm on provided door Frames of size 100mm x 30/45mm & Style 70mm x 45mm for door of size 900 x 2450. It includes supply of 10mm Thick Toughened glass for Door. Hardware as below. FLUSH HINGE 127x78x3mm, SS304, SATIN FIN, Dorma Narrow Style Lever handle and Lock, TS70 OPEN Door Closer with Slide channel arm and hold open unit, Half Dome Door Stopper.

Providing & Fixing of Automatic Sliding Door Operator Non Fire Rated Operator Finish : Standard Alu.Sliver, Clear Opening : 1800mm (W) X 2100mm (Ht) 2 Moving Panels of 900mm each, Panel Weight Double Sliding = 2 x 100 Kgs, ES 200 Easy 4.15mtr Automatic operator Consist's of :‐ Operator Profile ‐ 1 nos Mechanical Component ‐ 1 nos Electrical Component ‐ 1 nos, Glass Clamping Rail 1050mm ‐ 2nos Floor Guide for Glass Door ‐ 2nos Five Position Program Switch with knob ‐ 1no Cable for Program Switch Nemo Motion + Nemo Dual ( Safety& Motion) Combo pack Soft nose Seal ‐ 2nos of 2200mm EM Lock ‐Fail Safe,12mm toughened clear crystal edge polished glass for 2 Moving panels ONLY as per Approved drawing and Design or Direction By Engineer In-Charge.

Providing & Fixing of Wooden Moulding of different sizes including curvatures, carving as per Design & Drawing or Direction By Engineer In-Charge.

Providing and Laying of PU Paint in Structural MS Member for anti Corrosion or Direction by Engineer In-Charge.

Providing & Fixing of Curtain / Roller Blinds perforated Roller blind Manufactured By Hunter Douglas in optima series - Tex with fabric specification of - ( Fabric compositition The Roller mechanism shall be a moulded unit made from engineering grade plastic polymer with PVC spring support. The Fabric shall be attached to the roller tube with high quality self adhesive tape with manual operation . The fabric shall be attached to the tube with adhesive It should have minimmum one ton fabric which must be placed on the roller before the working section of fabric start.Operational action shall be smooth including necessary hardware for fixing at all places Approved Make (Hunter Douglus/ Vista/ Mac or Equivalent)or as per Direction by Engineer In-Charge. Basic Rate of Rs. 300/Sft

Providing and Fixing of Jaiselmer Stone Leather lapato or Plain Polished approved Finish stone in required design and patterns, building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as Direction by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent Basic Rate 200/Sft as per approved drawing and design or Direction by Engineer In-Charge.

Providing & Fixing of Motor with Remote for Roller Blinds in Chairman and Dy. Chairman Cabin Make - Somfy

Providing and fixing metal Baffel panels powdercoating finished are fixed on to 50-100 x 25 -50mm deep (or as per approved shop Drawing) of galvanized steel with cut-outs to hold the panels in customize module. Carriers are suspended from the roof by 4mm dia. Galvanized steel rod hanger with special Hight adjustment spring steel suspension clip at max. 1mtr. C/C. Hangers are fixed to the roof by ceiling bracket. work will be done as per approved Design & Drawing or Direction by Engineer In-Charge.

WOODEN DECK - Providing and fixing of Brazilian Walnut Wood specie 20mm thick x 140mm wide and 910 mm long. Along with Side grooves in the plank for fixing the PVC clips, top surface to be plain. All side groves of the planks to be oiled. Fixing to be done on 1x2 inches Aluminum + Wood reinforced batons with chemical treatment for Termite resistance. Subfloor to be done in Virgin PVC pedestals of a height 430mm imported from Australia. All the hardwares to be used Stainless steel. Surface oiling on the Brazilian Deck Planks to be done in Bona oil imported from Sweden for better durability. Top finish of the deck to be maintained 450mm.

Providing and Fixing of Boughtouts for Chess Members (GRC) as per approved Design & Drawing or as per Direction by Engineer Encharge.

Providing & Fixing of Out Door Lounge Seats for Deck area - Basic Rate 65000/- as per Direction By Engineer In-Charge.

Providing & Fixing of out Door Table & Chair Set for Deck are - Basic Rate 35000/- as per Directed By Engineer In-Charge.

Railing with Glass for Wooden Deck - Providing and fixing designer railing at deck area, item includes SS rail and baluster with Structural Support having Glass for clear vision, Complete as per detail design and instruction engieer in charge.

Providing & Fixing artificial Green wall for Vertical Surface -- , Item includes all leads lifts, cutting and fixing of grenn wall as per suggested combination, Basic Rate 450/- Sft

Providing & Fixing Artificial Green Grass / turf of 25 mm thickness for horizontal and Vertical Surface - Basic Rate 200/- Sft,

Laminated Glass Panelling , Partition for Elevator as per detail design

MS Designer Wall with Openable panel where ever required , having provision to use the same wall as ladder to access the service area, Item inclused all Square , rectangual hollow pipes with laser cut Plates as per detail design, .

Pergola in MS with Covering and neccesary Supports and covering for Rain Protection, all the MS Members to duly Painted with high Protection from Sun and water. Item to complete as per detail design and instrction engineer in charge

Providing & Installing Stamped Concrete of approved Design with Concrete of M-15 to M-20 Grade of Required thickness with pouring of concrete, Cleaning the Surface , stamping as per approved design using Microtopping Sustem for high abrasion resistance and claimatic stress. finishing the surface with colour hardner of Exterior Grade at terrace with Finishing Sealer . Complete as per Direction By Engineer In-Charge..

Open cell ceiling (100mm x100mm) - (Passage area) Providing and fixing in true horizontal level Open cell (Aluminium) lay-in ceiling tiles with border panels forming flush-tegular edge of size 600mmx600mmx.35mm having Fire Performance CLASS 0/Class 1 (BS 476). The tile of ‘Global white’ color with cell size 100mm X 100mm shall be laid on white painted Suprafine XL15mm profile grid system comprising Main runners (3000mm), 1200mm and 600mm cross tees with 15mm white flanges and 38mm web height. Opening size 100x100mm, The grid should be with 15mm wide T - section flanges color white having rotary stitching on all T sections i.e. the Main Runner with C3 coupling, 1200 mm & 600 mm Cross Tees with Hardened XL2 Clip having a web height of 38 mm and a load carrying capacity of 14 Kgs/M. The T Sections have a Galvanizing of 90 grams per M2 with pull out strength of 100 Kgs. Suspension system. INSTALLATION: To comprise main runner spaced at 1200mm centers securely fixed to the structural soffit by approved hangers at 1200mm maximum centre & not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall. 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross tees or as per Direction By Engineer In-Charge.

Polishing of Composite Marble diamond Polish, waxing etc completed as per instruction by engineer in charge.(For Diamond Polishing 11 Quote to be required)

CARPENTRY & LOOSE ITEMS

Conference Table -(3000L to 3250 L x 1350 to 1500 x 750mm ht.) Providing and fixing in place, table comprising of 25mm thick table top made of calibrated plywood. All edges to be finished with 2 mm thick edge band Rehau make with machined pressed and finished. Complete structure to be made of calibrated plywood all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as per Architectural drawing to be approved by Employer before entire scheme is finalised and directed by engineer in charge.

THREE seater sofa - Providing & Fixing of Three Seater sofa as per approved Design and Sample Basic rate 30000/-

Providing & Fixing of Exclusive chair as per approved design and sample Basic Rate of Chair is 40000/- for Chairman and Dy. Chairman

Providing & suppling of Desk with Pedestal made by using 19mm,12 thk Mr. Grade ply with 4.0 mm thick approved Veneer of approved make and finished in water based PU . Heavy and sturdy structural top with Thickness above 25 mm and below 50 mm approx. Size : 2800 -3600 x 1000 -1200 X 750MM H. with Pedestal Size : 400 x 400 X 700MM H. , Table to finish with PU Polish of 1st Quality.

Providing and fixing 46 mm thk Open Shelves made by using 35mm thk. Mr. grade B/B finished in veneer & Wooden beading with required hardware of approved quality etc. complete as per drawing.

Providing & suppling of Meeting table made by using 19mm,12 thk Mr. Grade ply with Veneer of approved make and finished in water based PU complete as per design. Size : 3000 x 2000 X 750MM H.

Providing & suppling of Centre Table made by using necessary ply with hardwood finished in Smoke Larch Veneer in sun burst pattern on top with water base pu as per design. Size : 600 x 900

Providing & suppling of Side Table made by using necessary ply with hardwood finished in Smoke Larch Veneer in sun burst pattern on top with waterbase pu as per design. Size : 450 x 450

Providing & suppling of 3 Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design.

Providing & suppling of Single Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design.

Providing & supplying of 2 Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design

Providing & supplyingof Single Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design

Providing & supplying of Center Table made by using necessary ply of Mr Grade with Smoke Larch Veneer in sun burst pattern on Top. Wooden Base / Leg of Ash wood finished in Waterbase pu as per design. Size 900 x 600 x 450mm ht.

Providing & supplyingof Center Table made by using necessary ply of Mr Grade with Smoke Larch Veneer in sun burst pattern on Top. Wooden Base / Leg of Ash wood finished in Waterbase pu as per design. Size 700 x 400 x 450mm ht.

Providing & supplying of Side Table made by using necessary ply of Mr Grade with Smoke Larch Veneer in sun burst pattern on Top.Wooden Base / Leg of Ash wood finished in Waterbase pu as per design. Size 500 Dia. x 500 mm ht.

Providing & supplying of Desk without storage & Side Credenza made by using 19/12mm thk ply finished in approved Veneer and finished in water based PU complete as per design. Size : 3000 x 1200 X 750MM HT. &with of Pedestal made by using 19mm,12 thk Mr. Grade ply with Veneer of approved make and finished in water based PU complete as per design. Size : 400 x 400 X 700MM H.

Providing & supplying of Meeting table made by using 19mm,12 thk Mr. Grade ply with Smoke Larch Veneer in sun burst pattern on Top.finished in water based PU complete as per design. Size : 1800 x 1050 X 750MM HT.

Cafe Table -1500 x 900 x 750mm ht.Providing and fixing in place, Cafe table comprising of 25mm thick table top made of Calibrated plywood with all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. All edges to be finished with 2 mm thick PVC edgebad rehau make with Machine pressed and finished. Structure is to be made of MS Leg and neccessary supports with chrome finishing. all complete as directed. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303)

Cafe Table -2100 x 900 x 750mm ht. Providing and fixing in place, Cafe table comprising of 25mm thick table top made of Calibrated plywood with all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. All edges to be finished with 2 mm thick PVC edgebad rehau make with Machine pressed and finished. Structure is to be made of MS Leg and neccessary supports with chrome finishing. all complete as directed. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303)

Providing & Fixing Cafe Chair Basic Rate of Chair Rs. 3000

Providing & Fixing High Height Table as per Diirected by Engineer In-Charge.

Providing & Fixing of Bar stool as per design or as per Directed bt Engineer Incharge

Corner Side Table (600L x 600D x 400mm Ht) Providing and fixing in place, table comprising of 25mm thick table top made of calibrated plywood. All edges to be finished with 2 mm thick edgeband Rehau make with machined pressed and finished. Complete structure to be made of calibrated plywood all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing and fixing low height factory made modular Partition frame for workstations and cubicles , Overall thickness of frame is 60-65 mm , All parts and trim made out patent Aluminium extrusion , having provision at different levels for service provision, Aluminium sections finished with Powder coating of approved shade , having provision for Approved laminate / Fabric tiles . Item complete with all accessories for aluminium extrusion and tiles . Rate is only for Aluminium frame work . Completed as per instructions directed by engineer incharge.

Providing & Fixing Metal Under structure with Powder coting in Round/Rectangle as per size - 3000 x 1350 x 750 Ht Completed as per instructions directed by engineer incharge.

Providing & Fixing Metal Under structure with Powder coting in Round/Rectangle as per size - 3250 x 1600 x 750 Ht Completed as per instructions directed by engineer incharge.

Providing & Fixing Metal Under structure with Powder coting in Round/Rectangle as per size - 1600 x 1200 x 750 Completed as per instructions directed by engineer incharge.

RAW MATERILS

MR Grade 25 mm Plywood

MR Grade 18 mm Plywood

MR Grade 12 mm Plywood

MR Grade 09 mm Plywood

1 mm Thick Laminate

0.8 mm Thick Laminate

0.7 mm Thick Laminate

0.6 mm Thick Flex Laminate

Marine Fevicol

PVC Edge Banding - 45 x 2

PVC Edge Banding - 30 x 2

PVC Edge Banding - 22 x 2

PVC Edge Banding - 30 x 0.8

PVC Edge Banding - 22 x 0.8

PVC Edge Banding - 22 x 0.45

Edge Banding Glue

Minifix set

Wooden Dowel

Levelling Bolt

D. Ended Bolt

Hinge ( Full ) + Mount. Plate -

Hinge ( Half ) + Mount. Plate -

Hinge ( In Site ) + Mount. Plate -

Shelve Support

Multipurpose Lock

F.M. Lock -

Drawer Cleat

L- Cleat

Farma Fit

Table Jointer

Tower Bolt - 3" (Regular )

Handle with Screw - 96 mm

Cable Manager - Plastic ( Regular )

Handle with Screw - 224 mm

Key Board Tray with Mouse Pad

08 mm Bush - For Hinges

S.S Screw 3.5 x 16

S.S Screw 3.5 x 09

S.S Screw 4 x 16

S.S Screw 4 x 20

S.S Screw 6 x 25

S.S Screw 8 x 25

S.S Screw 8 x 32

S.S Screw 8 x 38

S.S Screw 8 X 50

S.S Screw 8 X 75

S.S Tow Wey Screw - 38 mm

08 model Pup-up Box

Magnetic Catch Ultra Slim With Screws - MC-I1

White Board

09 mm Soft Board

Fabric

PLUMBING & EXTERIOR DRAINAGE

DOMESTIC & FLUSHING TRANSFER PUMP (1W+1SBY)

5 H.P, 3 phase 440V 50Hz 2900Rpm KSB make Open well Submersible pump with Copper rotar & S.S Shaft. Each pump capacity 450 L.P.M at 30 Mtr discharge head with 3 Mtrs Submersible power cable.

G.I Fabricated I.S.I “C” Class G.I Pipe/UPVC Sch-80 Pipe & Fittings For manifold with header for 2 Pump set. Including Branches pipe with fittings for each pump, Non-return valve, Butter fly valve with M.S Fabricated Flanges, nutt bolt, Washer, Gasket & 65 m.m G.I main Header Etc.

32 m.m U-flow make S.S body with Weather proof 230V Solenoid Valve with coil. Water Level Controller Control of Solenoid Valve & Dry Run Protection with Floater Switch & Censor. Control Cable Etc.

Power & Control Cable from Panel to Pumps & Panel to Controls with Fittings. Approx. 25 Mtrs Each.

200 Litres Capacity Pre-Charged Diagram Pressure Tank

1.5 H. P, Single phase 230V/3 phase 440V 50Hz 2900Rpm KSB make Horizontal Multistage S.S Inline pump. Each pump capacity 150 L.P.M at 25 Mtr discharge head with 3 Mtrs Submersible power cable.

System mount with complete horizontal MS Fabricated many fold type mounting base stand with necessary 80mm G.I “C “class main suction header with strainer 65 mm flanges GI pipe with 50 mm Butter fly valve50 mm branch pipe line with Butterfly valve, N.R.V & 65 m.m Discharge header with Ball Valve, Branches For Each Pumps.

300 Litres Capacity Pre-Charged Diagram tank with Fittings.

Float Switch (Censor) with lid Wire.

Pressure Switch, Pressure Gauge with Fittings.

Cables as Per Requirement for Power & Controls.

Removing the existing CI Pipeline from toilets of any Dia and stack spreading in the compound Storage and cleaning the site etc. Complete.

Providing and fixing in position 65mm Dia Ultra Violet stabilized UPVC plumbing pipes of specified outer diameter required standard thickness confirming to I.S.. 4985, including necessary fittings confirming to I.S.. 7834, such as P.V.C.. bends, vees, reducers, clamps, plugs etc. necessary excavation trench, refilling, necessary drilling holes in walls / slab, and making the good the surface etc. complete. (For 10.00 Kg/Sq.cm.. pressure)

Supply of Prefab Polymer Concrete ACO Drain V 100 Multiline Channels as per EN 1433 having following properties a) Compressive strength -96 N/mm2 b) Flexural strength -27N/mm2 c) Water absorption - 0.07% d) Manning's roughness- 0.011. The Channels must be 'V'-profile in shape with integrated edge protection made up of Galvanised Steel with boltless drainlock®grating with anti-shunt 4 no. provision per length. The Channels must also be presloped 1:200 or same invert / variable depth with 500 mm length and with tongue and groove joints for interlocking, integrated lip labyrinth sealing for liquid-tight connection to ground line with needed accessories like end cap, end cap with outlet etc. Channels to have anchoring features on the outside wall to ensure mechanical bond to the surrounding bedding material and pavement surface. The Channel gratings are made up of PP in 500 mm length, suitable for polymer concrete drain channels as per load class A 15 confirming to EN 1433. The Channels will have the nominal width of 100 mm and invert depth is 150 mm as per design. Art No: 12332 universal End plate End plate with outlet suitable for DN 100 with LLS Flow diverter plate

Composite plastic PP bar grate Micro grip, anthracite black with patented anti-slip surface structure, slip resistance class R13 according to DIN 51130 type Heel guard with slot width 8mm, inlet cross section 284 cm² / m with TPU snap fit locking and certified for load class A 15/B125 as per EN 1433.

Providing & Fixing of Zolotu Ball Valve 20mm Dia

Providing & Fixing of Zolotu Ball Valve 40mm Dia

P&F Overhead Water tank storage

Providing and laying PVC pipe in proper line, level and slope including necessary material fitting etc. complete.

200mm dia

160 mm dia

Supply & Laying Pvc Perforated Pipe of 75mm Dia Type -B With 25 MM Dia Holes in 25mm C to C With Double Cote PVC Net.

ELECTRICAL WORK

MV SWITCHGEARS AND PANELS

MLTP PANEL : - Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof incorporating the details as shown in the SLD. MAIN SLD : JNPT/ADMIN/ELE-SLD- ATTECHED (MAIN LT PANEL)

UPS PANEL :- Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof incorporating the details as shown in the SLD. REFER SLD : JNPT/ADMIN/ELE-SLD-ATTECHED (200 KVA UPS PANEL)

HVAC PANEL-1 :- Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof incorporating the details as shown in the SLD. REFER SLD : JNPT/ADMIN/ELE-SLD-01 -ATTECHED HVAC PANEL-1 FOR 2ND FLOOR TERRACE ODU FOR ZONES-1,2,6 OF ALL FLOORS

HVAC PANEL-2 : -Supplying, transporting to project site, installing and commissioning of floor moun ted panel dust and vermin proof incorporating the details as shown in the SLD. REFER SLD : JNPT/ADMIN/ELE-SLD-01 HVAC PANEL-2 FOR 1ST FLOOR TERRACE ODU FOR ZONES-3,4 OF ALL FLOORS

HVAC PANEL-3 : -Supplying, transporting to project site, installing and commissioning of floor mounted panel dust and vermin proof incorporating the details as shown in the SLD. REFER SLD : JNPT/ADMIN/ELE-SLD-01 -ATTCHED HVAC PANEL-3 FOR 1ST FLOOR TERRACE ODU FOR ZONES-5 OF ALL FLOORS

UPS :- SITC of UPS ON LINE 200KVA Three Phase Input & Three Phase Output complete with necessary protections,LCD Display, Fault Memory, RS/Ethernet Interface Compatibility, with batteries of Excide make maintenance free (15MIN Back-Up), with battery terminals wire and necessary copper wire, with plug and socket top Accessories,. Battery Stand, Isolation & Protection Switch for Battery Bank, Shrouds over Battery Terminals for Safety Purpose, Smart UPS with IGBT technology, Input p.f. Unity, THD below 5%, (Make-Emerson, Eaton, Numeric or equivalent )

CABLES AND END TERMINATIONS :- Supplying and laying in ready built-up trenches / excavated trenches, through home pipes laid by other agencies / on walls or on walls of lift shafts or on columns or on ceiling using G.I. spacers and G.I. saddles / G.I clamps made from G.I. strips, or on cable trays (cable tray supply & installation covered under item D.3) with nylon cable ties, the following XLPE insulated 1.1 KV grade, armoured and overall sheathed copper / aluminium conductor cables are made to IS:7098 (Part-l) 1988. Note: The quantity given in the quantity column is only indicative. The contractor shall bring to site cables as per actual requirement. Note: A2XFY/A2XWY stands for aluminium conductor armoured XLPE cable, 2XWY stands for Copper Conductor armoured XLPE cable

1C x 6 Sqmm. CU Ar cable

JUNCTION BOXES : Supplying and fixing 4 way G.I. Finish, Powder coated, MS junction boxes with knock-outs on all sides suitable for Raceways/conduits. The knock out shall be removed at site as per requirements. The junction boxes shall be laid in trenches for Raceways/conduits . The top cover shall be fixed with counter sunk screws. (For floor trenches).

Supplying and fixing Floor Junction Box (Weatherproof )with knock-outs on all sides suitable for Raceways/conduits. The knock out shall be removed at site as per requirements. The junction boxes shall be laid in trenches for Raceways/conduits . The top cover shall be fixed with counter sunk screws. (For floor trenches).

DISTRIBUTION BOARDS : -Supply, installation, testing & commissioning of 500V Phase segregated Distribution Boards as specified & shown on drawing with i) Copper busbars together with tapped neutral bar for individual phases. ii) Copper earth strip with tapping. iii)Busbar mounting MCB's individually lockable in off position. iv) Interconnections and earthing. v) Sheet steel enclosure suitable for recessed or surface mounting with hinged lockable doors interlocked with the incomer switch. vi) Phase to phase barriers in case of 3Ph boards. vii) Necessary support frame & painting, labelling, phase indicating lamps with fuses etc. complete.

GROUND FLOOR COURTYARDS 1 & 2 AND AMPHITHEATRE LIGHTING DB WITH TIMER Refer SLD and for details

GROUND FLOOR COURTYARDS 3 & 4 LIGHTING DB WITH TIMER Refer SLD and for details

GROUND FLOOR CONFERENCE ROOM UPS DB- 8 WAY SPN Refer SLD and for details

EXECUTIVE TERRACE FLOOR LIGTHING DB'S WITH TIMER Refer SLD and for details

SUBMAINS : -Supply Installtion and testing , Sub main Point wiring from distribution board to switch board using 3Rx2.5sqmm FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles. - HVAC IDU

Looping through (3R x 1.5sqmm FRLS PVC Copper flexible wires in 25mm dia FRLS PVC conduits)

One light point controlled by one motion sensor

Two light point controlled by one motion sensor

Three light point controlled by one motion sensor

Four light point controlled by one motion sensor

LIGHT FITTING &OTHER DEVICE

Supply & installation of 8 feet Linear Light.

Supply & installation of 6 feet Linear Light.

Supply & installation Wall Lights

Supply & installation of Decorative Light Dome Ceiling Type -1

Supply & installation of Decorative Rope /LED Streep for Dome Ceiling Light Type-2

Supply & installation of Up/Down Lights for Dome Ceiling Light Type- 3

Supply & installation of High Power LED Streep of for Dome Ceiling Light Type- 4

HUME PIPES AND RELEVANT CIVIL WORKS

300 MM DIA RCC HUME PIPES :- Supply and laying of the following RCC Hume pipe including road cutting, excavation to a depth of 750mm, back filling as required for cable entry including the cost of sealing the ends and making good as required and complete in all respects:

Supply of laying of following UPVC pipe of 6Kg/ cm2 including road cutting, excavation to a depth of 750mm, back filling and making good as required and approved:

200 MM DIA UPVC PIPES

150MM DIA UPVC PIPES

MANHOLE CHAMBERS :- Constructing brick masonry man hole chambers for electrical & LV Services with bricks of class designation 75 in cement mortar 1:5 (1 cement : 5 coarse sand) with RCC top slab of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), 200 mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside and outside plastering 12mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement inside and rough plaster on outside and making channel in cement concrete 1:2:4 mix, (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete.(1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) neatly finished complete M.S s, complete as per standard design and approved drawings, including the cost of excavation, back filling, disposal of surplus earth foot rests and other associated civil works with S.F.R.C cover and frame (heavy duty, HD- 20 grade designation) conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement

1000 x 1000 mm chamber

900 x 900 mm chamber

600 x 600 mm chamber

Supply and Installation of tie rod of 10 mm full threaded type with slotted channel as required for mounting of cable tray.Note- 1set include two nos of vertical rod and one horizontal slotted channel complete with anchoring in the ceiling. (For cable Tray support)

SITC of PVC Trunking 100X50

SITC of PVC Trunking 50X50

Cable Route marker

POP UP BOX

Table Pop up Box; Including 2Nos of 6A socket with switch, 2 USB Socket.

Table Pop up Box; Including 2Nos of 6A socket with switch.

Table Pop up Box; Including 2Nos of 6A socket with switch, 2Nos of RJ45 Socket and1Nos of RJ11.

LIGHT FITTING &OTHER DEVICE

Supply & installation Insect Catcher Machine.

Supply & installation HDMI SOCKET

Supply & installation VGA SOCKET

DISMENTALING & REMOVING WORK

Dismantling of existing wall Mounted Networking Rack

Dismantling of existing Distribution Board (DB) .

Dismantling of existing Circuit Breaker.

Dismantling of existing Panel( 1000mm X 800mm).

Dismantling of existing Panel( Above 1000mm X 1000mm).

Dismantling of existing Insect Catcher Machine.

Dismantling of existing buzer.

Dismantling of existing Cable Termination. ( Gland,Lugs)

Dismantling of existing 50X50mm PVC Trunking.

Dismantling of existing Cable Tray.

LV, SWING BARRIER, CCTV ADDITIONAL ITEMS

Swing barrier (4 Lane Normal + 1 Lane Wide) / Turnstile :- Automatic Swing Barrier - 4 Lane Acrylic Arm (Single Core-02 Nos , Dual Core -02 ) P - Type Swing Barrier 1 Lane- 900 mm Pass width (Acrylic Flap ),Access Control System For Entry And Exit (4+1) Lane :,Access Card Reader (Qty 10 Nos ) ,Door Controller -4 Door type with standard Software (Qty- 02) , Door Controller -2 Door type with standard Software (Qty -01 No) Nos ) , P - Type Swing Barrier 1 Lane- 900 mm Pass width (Acrylic Flap ), Access Control System For Entry And Exit (4+1) Lane : Access Card Reader . Door Controller -4 Door type with standard Software (Qty- 02 Nos ) Door Controller -2 Door type with standard Software (Qty -01 No)

Access Card -Proxmity card

Supply, Installation and Laying of 15 Mtr HDMI Cable

Supply, Installation and Laying of 1.8 Mtr HDMI Cable

Supply, Installation and Laying of 3 Mtr HDMI Cable

Supply ,Installation & Commissioning of HDMI Face Plate with Box

Supply ,Installation & Commissioning of HDMI Switcher

Supply, Installation and Laying of PVC Channel 100X50 MM

Supply, Installation, Testing and Commissioning 12F Loaded LIU Rack Mounting

Termination , Installation, Testing and Commissioning Existing Fiber Optice JNPT IT

Laying ,Installation and Commissioning Existing Fiber Optice with JNPT IT

Supply,Installation and Commissioning of Cable Manager

Providing & Fixing 6 port LIU loaded (Single or Multimode) field side switch

Providing & Fixing 48 port port LIU loaded (Single or Multimode) BMS room

Providing & Fixing LC to SC fiber patch cord (Single or Multimode) for outdoor camera, field side switch & server room

Providing & Fixing PoE injector for outdoor camera

Providing & Fixing 48 port sfp switch (BMS room)

Providing & Fixing SFP Transceivers (single or Multimode) oudoor camera & field switch

Providing & Fixing 1000Base-T Copper SFP Transceiver (PC & NVR)

Providing & Fixing 1 port sfp and 1 port copper converter (outdoor camera)

Providing & Fixing fiber armoured cable for outdoor camera & field switch (Single or Multimode)

Providing & Fixing power supply for outdoor camera poe injector and 1fiber with 1copper converter

Providing & Fixing water proof box for outdoor camera to keep poe injector, power supply and armoured fiber cable

Providing & Fixing Fiber termination box for outdoor camera

Providing & Fixing 2c X 1.0 sqmm power cable (POE injector & Convertor)

Providing & laying HDPE pipe for undsergound cable protection as per std.with necessary connection socket/ couplings tees of some material required as per suitable size.of 90 mm OD

HVAC WORK

Providing & Fixing Extra for G.I Stand instead of MS Stand for ODU Units

Providing & Laying of Anti Corrosive coating for Odu & Exposed Piping

Providing & Fixing of IP 24 rating Cowl Piece with Net mesh( <12.5 mm)

Providing & Fixing of AC Smart 5 CRC Units.

Providing & Laying of 4" PVC Pipe

FIRE DETECTION SYSTEM

Supply & installation of Addressable Heat Detector with Six levels of sensitivity, Fully integrated infrared sensing, Mounting Base for below false ceiling (Make.- Honeywell Morley or Equivalent)

Supply & installation of Foult Isolator Module Six levels of sensitivity, Fully integrated infrared sensing, Mounting Base for below false ceiling (Make.- Honeywell Morley or Equivalent)

Supply & Installation in position, testing and commissioning of Response Indicators all levels with all leads and lifts etc. complete.

Supply & installation of Junction Box for smoke detector

Supply & installation of Network card for fire alarm panel

Supply & installation of Autodialled for fire alarm panel

Supply & installation of Beam Detector Six levels of sensitivity, Fully integrated infrared sensing, Mounting Base for below false ceiling (Make.- Honeywell Morley or Equivalent)

Ajanta Interiors

Shandar Interior Pvt. Ltd.

Tathastu Infrastructure