CA NO CWE/CHM-58/2021-22 MISC REPAIR INCLUDING INTERNAL ELECTRIFICATION AND IMPROVEMENT TO MD JCO AND OR ACCN IN SECTOR C AT CHANDIMANDIR

Amount

Taking down chowkats or frame n. exc. 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frame exc. 1.5 sqm and n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed.

S&F factory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. complete all as specified and directed.

S&F factory made pressed steel frames having profile 105mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs, hinges, lock strike plate, thress hold bar/flat etc. complete all as specified & directed.

S & F 35 mm thick, factory made, second class hard wood, plain framed hammer marked, panelled shutter (two panel)with lock rail and panel of 9 mm BWP commercial ply both face including 1.00 mm thick sunmica (lamination) on both sides of p-anel and 20 mm x 20 mm x 10 mm wooden beading all round the panel. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to received gauge/ glass etc, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc complete all as specified and directed.

S&F 35 mm thick second class hard wood half panneled & Half glazed and skelton shutters open rebated and prepared to receive gauge/ glass etc, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass complete all as specified and directed.

Supply and fixing Factory made steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete with glazing bars, dovetailed or welded fixed with and including MS flat of suitable size for fixing grills and guards bars etc as in repair complete all as specified.

Supply and fixing Factory made steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete without glazing bars, dovetailed or welded fixed as in repair complete all as specified.

Supply and fixing factory made box type steel ventilators including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded fixed in repair complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire & avg width of aperture 1.18 mm in fixed with tinned tacks complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden, metel frames including punching or drilling out glazing pins/spring clips complete all as specified and directed.

Supply and fixing 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fixing 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fixing 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Material & labour for 18/19mm thick block boards, grade-I quality, exterior grade, decorative type with decorative face veneer on both faces, ISI marked, including PVC/wooden leeping/strip fixed with adhesive of SR quality on exposed face/edges fixed with screws to timber frame work for cabinets/racks, etc fixed in repair complete all as specified and directed.

S&F 25mm thick flush shutters, solid core costruction, with block board core and plywood face panels, commercial type on both sides as in cupboards, etc. complete all as specified and directed.

S & F PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, complete all as specified and directed.

S & F factory made solid panel PVC shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside all as specified and as per drawings upto 4th storey.

M&L for framed work such as grill guard bars etc welded to steel frame MS round/square bar conforming to Fe 290 Gde-E 165 complete all as specified and directed.

M&L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 of cement concrete 1:2:4 type B1 exc half brick not exc full brick as reqd, superficial area not exc 150 sq cm complete all as specified and directed.

S & F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 100mm butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC door, type C-21 complete all as specified and directed.

S&F 30mm width of flap (when open) size continuous (Piano) hinges, mild steel and fixed in repairs, complete all as specified and directed.

S&F 125mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F 200 mm size aluminium , barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 150 mm size aluminium, barrel tower bolt of extruded section and fixed for PVC door complete all as specified and directed.

S&F 150 mm aluminium handles cast type complete all as specified and directed.

S&F 250 mm long MS, sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 06 bolts and nuts, four on bolt plate and two on stable complete all as specified and directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide, zinc chrome complete all as specified and directed.

All as per item No 33 here-in-before but except primer

S&F for 300mm MS ordinary rat tail rod pattern spring incl roller plate complete all as specified and directed.

S&F for magic eye of size suitable for wooden door complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed.

Taking down existing plaster of any description on brick wall/ concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in CM 1:4 complete all as specified and directed.

M&L for cement plaster 10mm thick in CM 1:3 on fair faces of concrete/brick surfaces as in ceiling, chajja, etc. finished fair and smooth complete all as specified and directed.

M&L for 15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed.

M&L for three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

M&L for two coats of white wash on ceiling surfaces including preparation of old surfaces complete all as specified and directed.

M&L for complete removal of existing treatment (of any layer and thickness of painting) by means using of wire brush or grinder including washing rubbing down and stopping of distempered and painted surfaces and applying wall care putty of 2-3 mm thick over and including a coat of wall primer smoothening the surfaces with sand papers etc.and applying two coats of OBD using hand roller complete all as specified and directed.

M&L for complete removal of existing treatment (of any layer and thickness of painting) by means using of wire brush or grinder including washing rubbing down and stopping of distempered and painted surfaces and applying two coats of cement base paint incl necessary curing on wall surface of any description complete all as specified and directed.

Material and labour for two coats of white wash on wall surfaces including preparation of old surfaces complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed.

Material and labour for 50mm thick plain cement concrete type C-1 1:3:6 (Using 20mm graded crushed stone aggregates) as in plinth protection finished fair and even without using extra cement complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Demolition of un-reinforced cement concrete exc 15cm thick on any description and in any position (in sunken portion) not other wise specially provided for and removing all demolished material/debris exc 250m but n.exc 500m from the site and depositing where directed complete all as specified and directed.

Material and labour for plain cement concrete 1:7:12 type F-2 using 40mm graded brick coarse aggregate as in sunken floor filling and mass concrete complete all as specified & directed.

M&L for water proofing treatment to SUNKEN PORTION and adjoining walls of kitchen. WC, Bath & Toilet, etc complete all as specified as under:- (a) 15 mm plaster in cement mortar (1:3) after roughning and cleaning the surface mixed with WP compound as per manufacturer’s instructions. (b) Apply cement slurry to the surface @ 0.488 kg /Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and the surface will be allowed to air cure for 4 hours. (c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (d) Curing the sunken portion with water minimum for 48 Hrs by ponding. (e) Paste one layer of 3mm thick APP membranne with bitumen by torch application to the treated sunken surface over a coat of primer as per manufacturers instructions. (f) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound of make mentioned as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over & including 15 mm thick screed or bedding layer in CM 1:6, complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350mm x 250mm x 7 mm/300mmx450mmx 7mm thick as in dado, set and jointed in neat cement slurry and grouted in white cement complete as on vertical surfaces over & including 10 mm thick screed or bedding layer in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over & including 15 mm thick screed or bedding layer in CM 1:6, complete all as specified and directed.

M&L for 14-16 mm thick, baroda green marble, machine cut laid over & including 10mm thick average thicknesss) cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting & and machine polishing (table rubbed and polished), as in on kitchen plateform, step, jambs, pillars and like complete all as specified and directed.

M&L machine cut kota stone slab on vertical/horizontal surface like floors, skirtings etc, 16-18mm thick, best quality, width and length as ordered over and including 15mm thick average thickness cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting and machine polishing complete all as specified and directed.

M&L for Machine pressed interlocking tiles block as in repairs with grey cement and pigment of approved shape and size conforming to IS 15658-2006 of 60mm thick M-35 grade over and including 50mm thick consolidated thickness of sand cushion complete all as specified and directed.

M & L for making holes into or through concrete slabs/ stone slabs 150 mm long for 25mm dia pipe as in cooking plateform, incl making good the surface complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors, beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.

M&L RCC 1:1.5:3, type A 0, using 12.5mm graded crushed stone aggregate as in shelves, cover slabs of manhole, chajja, lintel or gully trap etc complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed.

Material and labour for form work to chullah hoods, chajjas and similar items including edges / sides and soffits of lintels etc rough finished surface of concrete flat complete all as specified and directed.

M&L Nahani traps 100mm dia with grating including jointing to waste pipe with run led jointed and setting/fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed.

S&F wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with and including CP mixer tap, waste coupling, angle brackets, PVC connection 15mm size, 450mm long, PVC waste pipe, fixed as in repair complete all as specified and directed.

Supply and fixing vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement fixed in repair complete all as specified and directed.

S & F Vitreous China Wash down water closet pedestal white(ETWC) with and incl PVC seat cover complete all as specified and directed.

S & F 100mm dia bore traps 'P' or 'S' complete all as specified and directed.

S & F in repair PVC valveless syphonic action type low level flushing cistern (Duel type) `White' with inlet, ball valve, float, handle, PVC connection & 32mm dia CP flush pipe (long type for squatting pan) incl brackets as in repairs complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm long as in repairs complete all as specified and directed.

Supply and fixing towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed.

Supply and fixing towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with CP bracket guard and railing 60cm long, fixed as in repair complete all as specified and directed.

Supply and fixing grating doom 100mm dia of PTMT fixed to floor trap with cement mortar 1:3 fixed as in repair complete all as specified and directed.

Supply and fixing plate rack of stainless steel sheet 1.0mm thick of size 600mmx 600mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed.

Supply and fixing kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm x 203mm, with bowl of size 405mm x 354mm x 203mm incl fixing cantilever brackets fixed as in repairs complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20mm bore complete all as specified and directed.

S & F 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning complete all as specified and directed.

S & F 20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed.

Supply and fixing stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing bib taps brass, fancy type, Short body with wall flange, standard chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs compl complete all as specified and directed.

Supply and fixing bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing stop valve (concealed type), chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing Wash hand Basin brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed

Supply and fixing chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed

Taking down rain water pipes (any types) including all fittings any size and pattern complete all as specified and directed.

Supply and fixing PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) and removal of any existing treatment , all debries /surplus material and soil etc to a distance of 1.5 KM complete all as specified & directed.

M&L for rendering 20mm thick, finished even and fair on roof slab in cement mortar 1:4, using water proofing compound complete all as specified and directed. (NOTE : WPC will be measured and paid for separately)

Supply only water proofing compound, ISI marked complete all as specified and directed.

M& L for RMC (low density thermal insulative concrete of density 1200 Kg/Cum) 1:2:4 type B-1 obtained from plant as mentioned in Appx 'B' as if roofs ,terraces,sunkens and in other locations as per site requirement laid all as per manufacturers instructions complete all as specified and directed.

M & L for Wire brushing and cleaning top surface, terracing or cement concrete, including flashings and junction of parapets, etc., and adjoining vertical surfaces and applying bituminous primer @ 0.40 ltrs per square meter including APP based polymeric membrane minimum weighing 3 kg/Sqm and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified and directed.

M&L 40mm thick brick tiles over and including 20mm thick Cement mortar 1:4 joints, grouted & pointed flush as the work proceeds mixed with crude oil 5% by wt of cement complete all as specified and directed.

All as per item No 106 here-in-before but except tiles.

S & F 20mm dia anodised aluminium alloy curtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed.

M&L for providing, cement concrete in roof kerbs of mud stops, rounded or chamfered on edges using type B-1, 1:2:4 (using 20 mm graded stone aggregate) including necessary form work complete all as specified and directed.

S&F 500 Litres capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) double layered hoisted and fixed in position including PTMT ball valve 20mm bore & PTMT tank nipple, etc, fixed as in repairs, complete all as specified and directed.

Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including PTMT tank nipple, float valve of 20 mm bore etc, fixed as in repairs complete all as specified and directed.

Supply and fixing float valve/ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed for 20mm bore pipe (minimum weight 210 gms), fixed as in repair complete all as specified and directed.

Taking down built in Gents/Ladies dressing mirror with table, cabinets, drawers, shelves, shutter etc. of any description & size and repairing the same by replacing of damaged parts/articles, oiling, greasing, easing and readjusting and re fixing back in original position and making good to match with existing surface of the disturbed portion of wall/masonry/concrete etc complete all as directed.” NOTE : All the replaced new items/parts will be measured and paid separately under respective items.

M&L fabricating of monkey menace with 10 Nos spikes (05 Nos each side) in GI sheet (Size of sheet 400mm x 150mmx 0.5mm) incl providing of 02 Nos holes for fixing to PVC tank with nut bolts complete all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, etc. and making good disturbed surfaces of walls, floors etc. complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed FRLSH 1100 volts grade single core muti stranded copper conductor cables of size 1.5 sqmm for phase & neutral in and including concealed PVC conduits, sheet steel sunken boxes1.2mm thickness with and inculding cover 3mm thick plastic laminated sheet for mounting switches, scockets, regulator etc and including 1.5 Sqmm copper conductor PVC insulated and unsheathed multi stranded green cable as earth wire for one light point/fan point / buzzer point controlled by one switch complete all as specified and directed. (unit rate quoted including cutting chases wall/floor/pcc and making good the disturbed surface to match with the original. Nothing extra shall be paid on this account) complete all as specified and directed.

All as per item No 116 here-in-before but for one socket outlet 3pin, 5 Amps on the same board.

All as per item No 116 here-in-before but for one socket outlet 3pin, 5 Amps on the independent board.

All as per item No 116 here-in-before but for one socket outlet 3 pin, 15 Amps on independent board using cables of size 2.5 sq mm for phase & neutral and 2.5 sq mm as earth wire.

M&L for point wiring with PVC insulated unsheathed FRLSH 1100 volts grade single core muti stranded copper conductor cables of size 1.5 sqmm for phase & neutral in existing concealed PVC conduits, and provn of new sheet steel sunken boxes1.2mm thickness covered inculding with 3mm thick plastic laminated sheet for mounting switches, scockets, regulator etc and including 1.5 Sqmm copper conductor PVC insulated and unsheathed multi stranded green cable as earth wire for one light point/fan point / buzzer point controlled by one switch complete all as specified and directed. (unit rate quoted including cutting chases wall/floor/pcc and making good the disturbed surface to match with the original. Nothing extra shall be paid on this account)

All as per item No 120 here-in-before but for one socket outlet 3 pin, 5 Amps on the same board.

All as per item No 120 here-in-before but for one socket outlet 3 pin, 5 Amps on the independent board.

All as per item No 120 here-in-before but for one socket outlet 3 pin, 15 Amps on independent board using cables of size 2.5 sq mm for phase & neutral and 2.5 sq mm as earth wire complete all as specified and directed.

S & F switch piano flush type, single pole, 230 volt one way , 5 Amps all as specified and directed.

S & F switch piano flush type, single pole, 230 volt one way , 15 Amps all complete all as specified and directed.

S & F Socket out let 2 in 1, 3 pin 5 Amps, 230 Volts complete all as specified and directed.

S & F Socket out let 2 in 1, 5/15 Amps,230 Volts complete all as specified and directed.

S&F stepped type electronic fan regulator piano flush Type 450W complete all as specified and directed.

S & F Electric bell, AC 230 volt, single pole complete all as specified & directed.

S & F bell push piano type SP 230 volts complete all as specified and directed.

S & F Ceiling rose PVC 6 Amps three terminals complete all as specified and directed.

S & F Lamp holder PVC insulated body with metal ring complete all as specified and directed.

S & F 7 watt LED lamp complete all as specified and directed.

S & F Bulk head fitting in engineering plastic housing with clear prismatic diffuser 10 watt capacity complete all as specified and directed.

S & F LED CRCA box type batten for T8 retrofit LED tube 20 watt with decorative end cap complete with and incl retrofit polycarbonate/glass tube 20 watt capacity 4 feet long & white light and incl connections from ceiling rose complete all as specified and directed.

S & F LED CRCA box type batten for T8 retrofit LED tube 10 watt with decorative end cap complete with and incl retrofit polycarbonate/glass tube 10 watt capacity 2 feet long & white light and incl connections from ceiling rose complete all as specified and directed.

Disconnecting and Taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit etc., removing materials and making good disturbed surfaces of wall, floors, etc. complete all as specified.

M&L for sub main wiring (with approved colour coding as per IS) with two single core 6 sqmm FRLSH PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable two runs of main cable) alongwith one run of single core 6 sqmm FRLSH PVC insulated flexible stranded copper donductor 1.1 KV grade of earth for earthing. Notes: (i) Conduit & conduit accessories shall be measured & paid for separately. (ii) Color code shall be Red for phase, black for neutral and green for earth. (iii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 running meter"

M & L for disconnection of power supply and taking down all type of MCCB, MCB DB, MCB complete all as specified and directed.

S & F for MCCB 4 pole, 3 phase 415 volts of capacity 100 to 125 Amp, 36 KA with adjustable thermal and magnetic release complete with proper copper thimble all as specified and directed.

S & F vertical TPN distribution board double door flush mounting with provisions for MCCBs incomer upto 100 to 125 Amp & outgoing 4 way having IP 54 protection complete all as specified and directed.

Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way complete all as specified and directed

S & F MCB SP 6 to 32 Amps 240 Volts having braking capacity 10 KA "C" characterstic complete all as specified and directed

S & F MCB SPN 40 Amps 240 Volts having braking capacity 10 KA "C" charactersticcomplete all as specified and directed

S & F MCB SP 63 Amps 240 Volts having braking capacity 10 KA "C" characterstic complete all as specified and directed

S & F 25mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', medium grade duly inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified.

M&L for cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces of wall as the existing after concealing the conduit in wall complete all as specified and directed.

Material & labour for earthing complete with galvanized steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 15mm bore connected to main earth wire on pole light grade 15mm bore connected to main earth wire on poleor control board or main switch and GI pipe medium grade 20mm bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:2:4 type B-1 20 mm graded stone aggregate excavation and earth work all as shown in electrical plate No 3 of MES Schedule part I of 2009 connected to earthing test point indicaed including testing on completion all specified & as directed. Note:The unit rate including for protection pipe and GI earth wire 4.00 mm dia from top to earth plate up to 7.5 meter and earth work.

Supply and fix in repair multipurpose PVC box with 05 Amps multipin socket and 05 Amps switch with necessary connection including taking down old UNSV/rusted box complete and making good the surface as per existing complete all as specified and directed.

Supply and fix in repair with 15 Amps multipin socket and 15 Amps switch with necessary connection including taking down old rusted box complete and making good the surface as per existing complete all as specified and directed

Supply and fix in replacement casing capping with fixing accessories of size 20mm width complete all as specified and directed.

Supply and fix in replacement casing capping with fixing accessories of size 25mm width complete all as specified and directed

Supply and fix in replacement machine/black star screws of size 1.5" & 2" with suitable size washer complete all as specified and directed by Engr-in Charge.

Supply and fix in replacement of PVC junction cover circular type with suitable size screws and washers complete all as specified and directed by Engr-in Charge

M & L in repair for GI bracket made of GI pipe 'Light Grade' of size 40 mm dia 1.5 mtr length bend to shape of 120 degree fixed on pole/wall with clamp of size 50x6 of suitable length fixed with nuts/bolts and 1.5 sqmm 2 core flexible wire from conductor/ceiling rose to light fitting complete all as specified and directed.

S&F LED security light 25 watt LED with lence and water/ weather proof powder coated high pressure dia cast housing with IP-66 built - in control driver, aluminium reflector, heat resistant toughened clear glass, connector block, surge protection with 25 watt LED lamp fixed on ceiling/pole/wall with fixing arrangement fixed with nuts/bolts and 1.5 sqmm 3 core flexible wire from ceiling rose to light fitting complete including taking down old secrity fitting any type all as specified and directed as per complete all as specified and directed.

S&F white flexible/twisted copper cable two core 1.5 sqmm all as specified and directed.

Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, of metal 2 way for meter protection all complete all as specified and directed.

Supply only plain PVC electrical wire insulating Tape roll in 25 mtr length complete all as specified and directed.

S & F sheet metal enclosure of size of 900 x 600 x 200mm with locking arrangement and provn of 4 nos of glass 75mmx 150mmsize in front door for measuring meter reading flush to wall for fixing of 04 Nos energy meter including taking down carefully energy meter including connection complete all as specified and directed.

m/s AR Construction co

MS R G ENTERPRISES

M/s Anil Kumar

Standard Const. Co.