REPAIR / MAINTENANCE OF GARBAGE BIN, SWT, BOUNDARY WALL, IRON GATE, CLEANING OF ROOF SURFACES / REMOVING OF SHRUBS ON ROOF AND CHAJJA AND CERTAIN B/R WORKS UNDER GE(AF) ADM AREA AT AF STATION GWALIOR

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface and finishing surface even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching ,kerbs, bed blocks and like etc complete all as specified and directed

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level, complete all as specified and as directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-2 using (20mm graded crushed stone aggregates) as in subbase for floor and finished even and fair complete all as specified.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block to be filled with fine sand and broomed etc complete all as specified and directed.

Cleaning away all grass vegetation, saplings, shrubs , brush wood under growth roots, bushes of any height/dia on roof top/chhajja of biuldings of any height and making repairing of roof/chhajja by rendering/pointing in CM1:3 /laying cement concrete 1:2:4 (12.5mm graded aggregate) to make the roof/chhajja surface smooth and free flow of water and removing rubbish out of the MD land at a distance exc 500m but not exc 1.5km as directed Engr-in-Charge

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

All as per Item No 13 here-in-before but embedded in natural ground

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc 50 m and making good surface in soft/dense soil complete all as specified and directed.

M&L Cement concrete type B1 1:2:4 (using 20mm graded stone aggregate ) as in foundation for Posts and Struts all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F framed wrok as in door or gates of angle or other section gussed plates, rails braces etc. complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging or sliding with and incl either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rail & guides) and hanging also fastening & fixing complete of size

S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F in repairs galvanised 2 stand, steel barbed wire 2.24 mm dia barbed with 2mm dia bards at 75mm spacings and straining and fixing to any type of standerd rails straining bolts, including, seuring or tying at crossings with and provision of galvanised mild steel wire, staples etc. complete all as specified and directed.

M&L for applying two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified and directed

M&L for pumping /bailing out water mixed with minor silt particles, scales and such like foreign material from static water tanks manually or mechanically and throwing it to open drains complete all as directed by Engineer-in-Charge.

M&L for taking out sludge including all foreign materials such as sand, grit, fibers, rages etc in semi liquid /solid form from the base of static water tank after dewatering /emptying the static water tank either manually or mechanically complete all as specified and directed. Note: The sludge is to be disposed off to a distance exc 500m but not exc 1.5 Km from the starting point.

M&L for scrapping the sides and base of static water tank against all loose scales, minor vegetation and cleaning, rubbing down with water complete all as specified and directed.

M&L for two coats of cement based paint to old surfaces of walls, base of static water tank complete all as specified and directed.

M&L for repairing of RCC Chajjas/Sunshades at any height & of any size (soffits, sides and top) with cement mortar 1:4 after taking down plaster of chajjas carefully including dubbing out in cement mortar 1:3 where ever required and providing groove to the soffit of chajjas. The tops of Chajjas are to be provided with extra PCC 1:2:4 type B-1 as coving. Two coats of cement base paint to match with the existing specification shall be applied to chajjas after the repair work is complete all as specified and directed.

Cutting out craks to v-section in existing wall, cleaning out, wetting and grouting with cement sand mortar 1:3 complete all as specified and directed.

M/s Gulshan and Brothers (BID ID -3166513)

M/S NIRMAL SINGH DHANJAL (BID ID -3166300)

Sunil Traders (BID ID -3160944)

JAY PRAKASH SHARMA (BID ID -3160753)

medha enterprises (BID ID -3166359)

m/s vikash Engineers (BID ID -3160365)

M/s. Ravi and brothers (BID ID -3160677)