REPAIRS TO BOUNDARY WALL, BARBED WIRE FENCING, CHAIN LINK FENCING, GATES AND JAFRI WALL, PERIODICAL SERVICES TO DIFFERENT STRUCTURES BLDGS SEMI UG SUMPS, E/M INSTALLATIONS AT INSIDE AND OUTSIDE OTA,DAY TO DAY REPAIR/MAINT OF JOINERY, PLUMBING

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

Broken glass coping on top of walls in cement mortar 1:3 including demolition of existing UNSV coping

Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in bands, seismic and other similar bands incl. weathering slightly rounded or chamfered angles and throating as directed incl necessary formwork.

M&L for Precast cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate louvers and jallies, 45 mm thick (measured solid) incl. all moulds set in CM 1:4 including demolition

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc

M&L for rendering 15mm thick on un fair faces of brick work or concrete surfaces finished with even and smooth without using extra cement in CM 1:4

M&L for Preparation of new plastered surfaces and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surfaces of walls.

Dismantling fencing / wire mesh, any type

Taking down steel gates from its position and repair the same including thorough tinning alignment properly including welding additional stiffer, braces, pintol hinges locking arrangement etc and erecting the same back in position after applying one coat of synthetic enamel paint in area of gate n.exc 5.00 Sqm all as directed.

Dismantling cast iron work of any description

Supply and fix Chain link mild steel galvanised fencing, PVC coated 60 x 60 mm aperture and 10 gauge wire fixed with nuts and bolts etc all as directed.

Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long with diameter of shank 11 to 15mm all as specified

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, flat iron etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 including necessary drilling, demolition ,embedding in cement concrete and make good after repair.

Supply and fix 10mm dia MS round bars including welding with necessary lapping all as directed Gde IS-432 (Part-I )

M&L for Preparation of new surfaces of any description over 10 cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including dismantling of UNSV barbed wire. as directed each line wire to be measured

M&L for preparing plastered or unplastered old decorated surfaces of wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified.

M&L for preparing plastered or unplastered old decorated Ceiling surfaces by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified.

M&L for preparing plastered or unplastered old surfaces of wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including crack filling and undulation filling with wall putty to achieve smooth finish and applying one coat of distempering with oil bound distemper white or tinted complete all as specified.

M&L for preparing plastered or unplastered old decorated ceiling surfaces and applying one coat of distempering with oil bound distemper white or tinted complete all as specified.

Complete removal of existing treatment on walls and applying two coat of oil bound distemper over a coat of primer with 3mm thick wall putty to achieve smooth finish all as specified and as directed.

M&L for preparing of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparing plastered or unplastered old surfaces of wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing rubbing down and applying one coat of cement based paint white or tinted upto triple storey building including scaffolding arrangement complete all as specified.

M&L rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even & smooth w/o using extra cement on internal surfaces of wall.

M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces over setting coat 5mm thick in CM 1:2 as in ceiling surfaces and finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for preparing of new plastered surfaces of ceiling and applying three coats white wash all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer with 3mm thick wall putty on internal surfaces of walls.

Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n exc 4 Sqm each including making good disturbed surfaces all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc. 1.5 Sqm each including making good disturbed surfaces all as specified and as directed.

Taking down shutters of any description n exc 1 sq. m each all as specified.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each all as specified.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required for exc half brick but n.exc one brick thick walls.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed.

S&F Factory made 35mm thick Flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as spcd and as directed.

S&F Second class hardwood 35 mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats.

S&F Second class hardwood 35mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., with sash bars, divided into squares edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats.

S&F Sheet glass, ordinary quality, 4mm thickness and glazing with oil putty or wooden beading in square n. exc. 0.5 Sqm each .

S&F Figured glass, pin head type 4 mm thickness and glazing with oil putty or wooden beading in square n. exc. 0.5 Sqm each .

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F MS work as in holdfasts conforming to Fe-290 Gde-E-165

M&L Preparation of surface of steel and iron such as holdfasts of area n exc 0.10 Sqm each new or old of any description and girth not otherwise treated with tar or coal tar black paint.

M&L Preparation of surface of wood and wood based materials, such as back of chowkhats of area exc 0.10 Sqm but n exc 0.5 Sqm each new or old of any description and girth not otherwise treated with tar or coal tar black paint.

S&F 100mm size of mild steel butt hinges, medium weight, cold rolled .

S&F 75mm size of mild steel butt hinges, medium weight, cold rolled .

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm size.

S&F Aluminium anodised barrel tower bolts of extruded section 125 mm size.

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm long.

S&F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed

M&L for Preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165.

Hacking out old broken glass (any thickness, size, quality or description) from any type of frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F Sheet glass, ordinary quality, 5.5 mm thickness and glazing with oil putty or wooden beading in square exc. 0.5 Sqm each .

S&F 300mm, ordinary mild steel rat tail pattern springs including roller and roller plate complete fixed in repairs.

S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple on any type of door/windows.

Taking down shutter of any description n exc 1 sqm each and refixing in the same opening with necessary repairs all as specified.

Taking down shutter of any description exc 1 Sqm but n exc 1 sqm each and refixing in the same opening with necessary repairs all as specified.

Dismantling boarding of any description fixed in any position with nails

S&F 19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

S&F 125mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws.

S&F Anodised aluminium frame for doors, windows, ventilators and grills/guard bars etc with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc., complete all as specified.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 No), suitable handle (1 No), etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, fixed / louvered type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F 40mm thick Polished cuddapah stone slab fixed as in cub board shelving complete all as spcd and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM 1:3 for inserting cuddapah stone shelving and similar work and making good, cutting in brick walls exc 10cm but n exc 20cm girth.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S&F in repairs 15mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F in repairs 20mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F in repairs 25mm bore steel tubes medium grade galvanised with all fittings / fixtures concealed to walls and ceilings or laid in floors.

S&F in repairs vitreous china oval shaped counter top wash hand basin, white, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting of fixing of supply and waste pipe all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) with plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device all as directed.

S&F Vitreous china urinal half stall type, white 9excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement.

S&F in repairs PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it’s complete accessories, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc.

S&F in repairs brass CP shower rose with or without swivel joints 125 mm size.

S&F in repairs Angle valves, cast copper alloy, screwed down, high pressure and fly nuts, screwed for iron pipe 15 mm bore and fixed in repairs all as specified.

S&F in repairs Stop cock (concealed type) cast copper alloy , Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, 15 mm bore.

S&F in repairs 15mm Bib taps, chromium plated fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

S&F in repairs pillar taps 15mm bore cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered hot' or 'cold' with long screwed shanks and fly nuts screwed for iron pipe .

S&F PVC connection 15mm dia with PTMT nuts of length 450mm.

S&F chromium plated cascade health faucet with minimum 1200mm long pipe of fancy type CP connection and hook fixed in repairs all as directed.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device.

M&L for 18/19 mm Pre laminated particle boards, interior grade, Pre laminated decorative choice one side & other side balancing white lamination fixed in repairs with screws to timber work for Cup Boards complete.

M&L for 6mm thick external teak wood lipping fixed to18/19mm thick particle boards with nails.

S&F continuous (piano) hinge mild steel, bright finish or electro galvanised width of flaps 40mm (when open) all as directed.

S&F 75 mm size extruded aluminium alloy handles, fabricated type, anodised.

S&F Aluminium anodised Hasp and staple, safety type of size 75mm.

S&F in repairs 25mm dia aluminium coloured powder coated decorative fancy type curtain rods all as specified and as directed.

S&F aluminium coloured powder coated decorative fancy type end bracket and knob for 25mm curtain rods all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for glazed ceramic coloured joint free tiles in vertical surfaces 350 x 250 x 7mm/450x350x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement, incl cement screed 10 mm thick in CM 1:3 all as specified and directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick screed bed in CM 1:4 complete all as directed.

M&L for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces over 15 mm thick screed bed in CM 1:4 complete all as directed.

Taking down old CI pipe of any type & description

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in floor, 75mm bore.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls, 75mm bore.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in walls, 110mm bore.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls, 110mm bore.

S&F PVC (SWR) bend 110mm bore.

S&F PVC (SWR) floor trap with grating including jointing to solvent cement waste pipe 75mm dia.

S&F PVC (SWR) Gully trap 125 / 110mm setting and jointing with solvent cement.

S&F PVC (SWR) vent cowl 110 mm

S&F PVC (SWR) junction single, (Single T) equal or unequal for 110mm bore pipe with access door

S&F PVC (SWR) junction single, (Single T) equal or unequal for 75mm bore pipe with access door

S&F PVC (SWR) bend 75 mm bore.

Grating doom 100mm dia of PTMT Minimum weight 25gms)

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof Bore of pipe 110 mm

Demolition of unreinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposed off from site all as directed.

M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded agg) as in sub base.

M&L chequered Cement concrete tiles 30 cmx30cmx 25 mm thick set, jointed and pointed neat cement slurry in floor with grey cement and pigments, incl 20 mm thick screed bed in CM (1: 4) all as specified and directed by Engr-in-Charge.

M&L 75mm thick cement concrete 1:3:6, type C1 (using 40mm graded stone aggregate) as in plinth protection & paving, finished even & fair without using extra cement.

S&F in repairs rotational moulded polyethylene triple layered water storage tanks (cylindrical vertical with closed top) 1000 litres capacity of white colour hoisted and fixed in position including taking down all as spcd.

S&F in repairs rotational moulded polyethylene triple layered water storage tanks (cylindrical vertical with closed top) 500 litres capacity of white colour hoisted and fixed in position including taking down all as spcd.

S&F in repairs 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms)

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms)

S&F in repairs 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe

M&L for 15mm thick rendering in two layers of 10mm thick and 5mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even & smooth w/o using extra cement, mixed with liquid water proofing admixture including scaffolding arrangement complete (as per manufactures instructions) all as specified. Note : Liquid water proofing chemical shall be measured and paid separately.

M&L for rendering 5mm thick in CM 1:3 on fair faces of concrete surfaces over setting coat 5mm thick in CM 1:2 as in chajja/ceiling surfaces and finished even and smooth with out using extra cement including scaffolding arrangement complete all as specified and as directed.

Supply only liquid waterproofing chemicals

M&L for Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

M&L for Preparation of new plastered surfaces and applying two coats of exterior weather proof paint over a coat primer white or tinted upto triple storey building including scaffolding arrangement on external surfaces of wall complete all as specified and directed

M&L for preparing of plastered or unplastered old surfaces of wall and applying one coat of exterior weather proof paint white or tinted upto triple storey building including scaffolding arrangement complete all as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as spcd.

M&L for Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 including pointing in white cement !:2 using marble dust with admixture of pigment to match with shade of granite.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

S&F Modular False ceiling with vinyl laminated gypsum tiles having 8 mm thickness, of size 595mmx595mm the tiles to be fixed with suspension system (Grid) of size 24mm x32mm , made of hot dipped galvanised steel section to prevent corrosion and the exposed surfaces of grid chemically cleaned capping prepainted /backed in polyester paint. The standard procedure for installation of grids is to be followed, where main runners of standard length of 3600 mm used along with cross section of 1200mm c/c . Wall angle (size 22mm x22mm) of the same quality as the grids to be used on the periphery along the wall or portion using screws at 600mm c/c and cross tee (24mmx23) to be interlocked between main runner at 600mm c/c(max) to form a grid of 600mm x600mm. The main runner to be hung from the soffit with the help of 4mm dia GI wire hanger with 'L' shape adjuster and 6mm dia wire anchored fastener @ 1200mm c/c ( Max ). Note : The work to be carried out by the auth manufacturer only.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door / windows and other Frames / Chowkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58 - 60 (Suspension grade), calcium carbonate and natural fibres (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge) minimum compressive strength of 58 N/Sqmm and resistance to spread of flame of class A category with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast / lugs / SS dash fasteners of reqd dia and length complete as per direction of Engr in charge.

All as per item No 134 above but of frame size 65 x 100mm

All as per item No 134 above but of frame size 45 x 70mm for fixing WPC Cub board / Cabinet shutter.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58 - 60 (Suspension grade), calcium carbonate and natural fibres (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg / cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge) minimum compressive strength 50 N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with SS butt hinges of reqd size with necessary full body threaded star headed counter sunk SS screws all as per direction

Factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) but wire gauged, ie. Panel will be of wire gauge in lieu of PVC sheet panel. The wire gauge shall be wrapped on an additional square 8mm M S solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly.

All as per item no.138 above but 18 / 20mm thick flush door shutter suitable for Cub board and cabinets

M&L for providing 25mm thick Cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in floor finishings

M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and the like CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble Makrana white over 15 mm thick screed bed in CM 1:4

S&F Powder coated anodised aluminium deco grill of size of mesh not exc 75mm x 75mm, thickness shall approx be 6mm, decorative type and fixed with suitable aluminium section fixed to alum frame of windows / ventilators complete all as spcd and as directed.

G.JANAKIRAMAN CO