GE(S) BTD TOKEN NO 61 OF 2023-24 CERTAIN BR REPAIR TO ROOFING JOINERY FLOORING TO OTM ACCN OF GE ENGR PARK AND PET ASC AND INCLUDING PERIODICAL SERVICES OTHER AREA UNDER AOR OF AGE BR II UNDER GARRISON ENGINEER (SOUTH) BATHINDA AT BATHINDA MILITARY

Amount

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed.

Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified in Preamble 8B. 3.1 of SSR Part -II (2010) and all as shown on drawing of SSR Part-II (2010) including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed. complete all as specified and directed .

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 156. complete all as specified and as directed.

Supply and fixing extruded aluminium anodised 100mm long butt hinges with galvanised mild steel screws complete all as specified and as directed .

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed .

S&F aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed .

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 125 x 60mm, including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates including hinges, lock strike plate, fixing lugs, etc., size of frame 105 x 60mm, including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed.

M & L for PCC 1:3:6 type C1 (20mm graded crushed stone aggregates) as in filling back of pressed steel door frames/chowkhats and for fixing hold fasts, etc., complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and removal from site complete all as specified and directed.

S&F 35mm thick factory made panelled shutter (two panel) plain framed with lock rail and panel of 12mm thick plywood commercial type and chemically pressure treated of second class hard wood rails and styles and the size of rail and style as per IS-1003(Part I).

Supply and fixing 35 mm thick , glazed or gauged skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with or without sash bars), using 2nd class hard wood (Bonsum / Hollock), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note - Wire gauze / glass to be measured and paid separately

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos , hinges 3 Nos in each door, anodised aluminum snap beading screws etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle 125mm (1 no.) complete all as specified

S & F 3 mm thick figured glass, pin head type and glazing with oil putty in ventilator complete.

S & F 3 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S & F 5.50mm thick sheet glass ordinary quality and glazing with beads fixed with metal pins complete all as specified and directed.

Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

S & F MS galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks to galvanised wire staple complete all as specified and directed.

S&F in repairs Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified

Supply and fixing mild steel sliding door bolts with hasp and staple, length of bolt 300mm, plate type, stove enamelled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified

Supply and fixing mild steel barrel tower bolts, 150 mm long, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified

Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black (ISI marked) complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified.

Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome complete all as specified and directed.

Dismantling existing broken unserviceable PVC tank of capacity 500 Ltrs.

Supply and fixing in repair three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.

Supply and fixing in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.

S&F in repair 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repairs plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S & F in repair PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified and as directed.

S&F Factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F Factory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

Dismantling floor, hearth or wall tiling/terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster in CM 1:4 complete all as specified and as directed .

Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.

Non skid floor tiles, coloured, of size 600x600x7mm thick or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 10 mm thick bedding layer in cm 1:6 all as specified and directed.

Description all as per Ser item No 40 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and as directed by the Engineer-in-Charge.

Demolition of cement concrete (unreinforced) including tiles of any description & terrazzo finish, etc. not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for hard core of broken bricks gauge n.exc 63 mm, deposited, spread and levelled in layers in exc 15 cm thick. Watered and rammed to true surface complete all as specified and directed by Engineer-in-Charge

M&L for 60mm thick machine pressed precast concrete interlocking pavers/tiles with grey cement and no pigment, confirming to IS 15658-2006 M-35 Grade,of any size & shape as directed in floors over & including 25mm thick sand screed beding etc in repair complete all as specified and directed Engineer-in-Charge

Supply and fixing in repair bib taps, CP Brass or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed .

Supply and fixing in repair 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed .

Supply and fixing in repair 15 mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed .

Supply and fixing in repair brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed.

S & F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm including 40mm dia waste fittings ,brass, chromium plated with long screwed and fly- nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed .

M&L for 25mm dia fancy type PVC coated in wooden finish on MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing pipes of any description with accessories complete all as specified. Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed .

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed .

Taking down AC eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and directed.

S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.

Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including cast iron cantilever bracket 32 mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union complete all as specified and as directed .

Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and directed.

Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall, laid in trenches incl all fittings & accessories complete all as specified and directed.

S & F cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.

S & F cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints l fixed in walls complete all as specified and directed.

S & F 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.

S & F 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.

S & F 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches including jointing to waste pipe fixed in cement concrete 1:2:4 type B 1 in repair with oval access door bore complete all as specified and directed

Supply and fixing in repair cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP grating of suitable size complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.

Supply only of Liquid water proofing compound of approved make complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 10 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of Acrylic emulsion distemper over a coat of suitable primer including a layer of 2 to 3 mm thick wall putty all as specified and directed.

Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preparation of surfaces, complete all as specified and directed.

Material and labour three coats of white wash on newly plastered surface of wall including preparation the surface of on walls complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pilasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except bricks (old serviceable bricks to be used) complete all as specified and directed. Note : The rate includes for cleaning of old bricks.

Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed

M&L 40mm thick brick tiles on mud mortar and joints grouted flush and pointed in CM (1:3) mixed with crude oil @ 5% by weight of ce-ment on mud phuska,incl.Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material

M&L 40mm thick brick tiles on mud mortar and joints grouted flush and pointed in CM (1:3) mixed with crude oil @ 5% by weight of cement on mud phuska but except brick tiles (old serviceable brick tiles to be reused after proper cleaning & washing )incl.Di

M&L Rendering 15 mm thick C:M 1:4 mixing with WPC @ 200 ml/bag of cement on fair faces of concrete/brick tile surfaces on roof slab after wire brushing and cleaning top surface all as specified NOTE: WPC will be measured and paid for separately under res

M&L for cleaning of Roof wall concrete surfaces & applied a coat of cold bituminous primer over cleaned surface @ 0.30 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum wt. 3.6 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/Sqm) manufactured by M/S STP Ltd India Ltd/ M/S IWL India Ltd or its equivalent laid as per the manufactures instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces if required & finally finished with bituminous aluminium paint @ 0.10 Kg/Sqm complete all as specified and as directed

M & L in repair PCC 1:2:4 for PCC type B-1 using 20 mm graded stone aggregate as in coping steps bed blocks etc complete all as specified and directed by Engineer-in-Charge

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts

Surfaces of any description, n.exc 10cm in width or girth when uncon?nected with other painting or when painted in a different tint

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Anodised aluminium snap grid (Size of grid 605 x 605mm) frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

M&L 10 mm thick 600 X 600 mm PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing

M&L hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site wood grain printed PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified

Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed.

Pre-polished kota stone 20-25mm thick as in flooring, cills and stair case over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rounding of edges complete all as specified and directed.

Pre-polished kota stone 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

Preparing of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescence, salt and trading oil and greasy spouts and applying one coat of white wash on walls including cornices etc complete all as specified and directed

M&L for applying each subsequent coat of white wash after applying first coat of white wash, complete all as specified and directed. Note : First coat of white wash shall be measured and paid separately under item 104 above.

Preparation of old plastered or unplastered old decorated surfaces of ceiling by brooming for down or steel wire brushing, scrapping down make spots, treating oily/greasy spots, mass and efflorescence and applying one coat of white wash on ceiling including cornices etc complete all as specified and directed.

Preparation of old (Previously treated) plastered or unplastered surfaces of walls by washing, rubbing down and stopping of distempered or painted surfaces of walls and applying one coat of acrylic emultion white or tinted on walls complete all as specified and directed.

M&L for preparation of old plaster surfaces of wall by brooming down or steel wire brushing or by using mechanical sander and applying two coat of Acrylic emultion on walls by using roller / spray machine complete all as specified and directed.

M&L for complete removal of existing treatment of any description on old wall surfaces and applying two coats acrylic emulsion over a coat of wall care putty complete all as specified and directed. Note-: Smart periodical methodology using airless spray airless graco machine / roller by authorised applicator and approved makes.

M&L for preparation old previously treated surface of steel and iron work any description over 10 cm width or girth and applying one coat of synthetic enamel paint on old steel surfaces, complete all as specified and directed.

M&L for preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on old decorated wooden surfaces, complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of any description over 10 cm girth or width, not otherwise described and applying one coat of synthetic enamel paint on plastered surfaces walls, complete all as specified and directed. surfaces.

M&L for Complete removal of existing treatment of any description on old wall surfaces plastered or unplastered surfaces of walls and applying two coat of cement base paint on walls including cornices etc complete all as specified and directed.

Preparing of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot, moulds, mass and efflorescence, salt and trading oil and greasy spouts and applying one coat of cement base paint on walls including cornices etc complete all as specified and directed

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

M/s Manav Builders

RAKESH KUMAR GARG & CO.