SPL REPAIR REPLACEMENT OF BER AC PLANT AT BURDONG AND PROVN OF CERTAIN SANCTIONED WORKS UNDER GE GANGTOK

Amount

Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and directed.

Demolition to cement concrete of any description and in any position not otherwise specifically provided for (unreinforced) complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, and brushing neat cement slurry with 3.0kg of cement per Sq metre etc complete all as specified and as directed.

M&L for 75 mm thick PCC (1: 3: 6) type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection finished the surfaces fair and even complete all as specifed and as directed

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by the Engr-in-Charge.

Taking down chowkats or frames with shutter of any description (without taking down shutter from the frame) not exc. 1.5 Sqm each and removing from site complete all as directed.

Taking down shutters and refixing in same opening of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in surface channels/drain including forming fair finished to drain channel complete all as specified and directed.

S&F steel windows with side hung shutters including projecting/box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded incl taking down of existing window shutter complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting/box type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded incl taking down of existing window shutter complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay incl taking down of existing window shutter complete all as specified and as directed.

S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty/nails in square n.exc .50 sqm in each panels complete all as specified and as directed.

S&F for 3 mm thick Figured glass, pin head type and glazing with oil putty/nails in square n.exc .50 sqm in each panels complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification and drawing complete all as specified and directed.

S&F of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of mild steel tubes for top and bottom rails, ild steel frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail on either side & as gap insert for toprail and bottom rail, panelling of both side prelam PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with uitable PVC sheet beading and jointed together with solvent cement as per specification and drawing given on MES Schedule Part-II (2020) complete all as pecified and directed.

M&L for 100 mm size mild steel pressed handles, oval types, stove enameled black complete all as specified and as directed..

S&F of 100mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified and directed.

Supply & fix 100mm size brass handles (decorative type) cast type polished bright complete all as specified and directed complete all as specified and directed.

S&F of 75mm size mild steel butt hinges medium weight complete all as specified and directed.

S&F powder coated GI grid frame work for false ceiling comprising of the following sections for making partition of 600x600mm size fixed to walls with rawl plugs and screws and hanged to roof with and including 1.18 mm dia GI wire suspender of suitable length and buterfly clips, size of main tee shall be 23mmx 28mmx 0.30mm thick, cross tee shall be (24x 23x .30 mm) thick and wall angle shall be 20mmx20mmx0.30mm thick complete all as specified and as directed.

Supply and fix 4mm thick Non asbestos fibre cement building boards (E-board) of approved texture, for insulation and acoustic purpose of size 595 x 595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surfaces and applying two coats of oil emulsion diatemper over a coat of primer including preparation of surfaces complete all as specified and as directed by the Engr-in Charge.

Taking up or down 15mm bore dia steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed.

All as per item No 23.00 here-in-above but 20mm bore dia

Fixing only 15mm bore dia steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings etc complete all as specified and as directed.

All as per item No 25.00 here-in-above but 20mm bore dia

M&L for 15mm bore dia steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for this following.

All as per item No 27.00 here-in-above but 20mm bore dia

S&F of GI steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and as directed.

M&L for Cutting chases, pinning in, making good to facing where required and pointing in CM (1:3) for concealed water tubing conduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls complete all as specified and directed.

Materials & labour for rendering 15 mm thick in cement mortar (1:6) on fair face of brick or stone masonary of wall surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4) in using WPC in finishing layer on brick or concrete surfaces finished even & smooth (WPC for finishing layer will be paid seperately as supply only) complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar (1:3) on fair face of concrete surfaces such as ceiling finished surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces and applying three coat of white wash on ceiling including comices, pillasters and other wall features complete all as specified and directed.

Supply only liquid water proofing compound.

M&L for applying two coats of exterior acrylic emulsion painting over a coat of alkali resistant primer including complete removal of existing treatment and preperation of old / new surfaces complete all as specified and directed.

M&L for applying two coats of OBD over a coat of primer applied over 3mm thick in two layer (1.5mm each) super fine Birla or altek wall care putty finish including including complete removal of existing treatment and preperation of old/new surfaces preparing the surfaces even and smooth complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or grith and applying one coat of synthetic enamel paint (1st grade quality) complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer to new or previously un-treated steel surfaces of any description over 10 cm in width or girth including preparation of new steel surfaces complete all as specified and as directed.

S&F in repairs decorative type 25mm dia curtain rod, Chromium plated with fixing brackets, stops,and complete fitments all as specified and as directed by Engr-in-Charge.

S&F repair CP towel rack, size 600 mm long with lower hanger type complete all as specified and directed. Make : Jaquar coe AKP - 35781PS

Supply and fix in repair designer corner glass shelf 25 x 25 cm with CP Steel frame complete all as specified and as directed. ( Make Jaquar Code ACN : 1173 or equivalent)

S&F for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall, laid in trenches or in floor with all necessary clamps, bolts, bends, Tee etc. complete all as specified and as directed.

S&F PVC (SWR) 75mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor with necessary clamps, bolt, bends, Tee complete all as specified and as directed.

S&F as in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F as in repair 75mm bore PVC (SWR) bends any radius complete all as specified and as directed.

M&L in repairs for PVC floor/Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1(diameter of outlet 100mm) as in repair complete all as specified and directed.

M&L for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite granite stone including cutting and polishing etc including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for rounding to edges of granite slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and as directed.

M&L for Non - skid colured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for Dark/Light shade virtified tiles 8-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour incl 15mm thick screed bed in cement mortar (1:6) for laying floor/roof finishes complete all as specified and as directed.

All as per item No 53.00 here-in-above but in skirting with 10 mm thick backing coat in CM ( 1:4) complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4) type B1 (20mm graded stone aggregate), finished concrete surfaces even and rough to receive floor finishes complete all as specified and directed.

S&F in repairs of vitreous china wash down water closet pedestal pattern white with all fittings fixed as in repairs (excluding flushing cistern and flush pipe) including plastic water closet seat,white closed pattern with flat bottom and cover and MS CP aluminium/ PVC hinging device complete all as specified and directed.

S&F in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete (excluding PVC connection pipe) complete all as specified & as dirceted.

S&F Vitreous China, Wash Hand Basin, white, flat back of size 550 mm x 400 mm, including cutting for and pinning in ends of brackets or errecting stands and 15 mm bore PVC connector pipe, 32 mm dia chromium plated waste coupling, 32 mm dia PVC waste pipe complete all as specified & as dirceted.

S&F in repairs sink with drainage board made of stainless steel 1.00mm thick for kitchen with plugs, washers and waste pipe, wasters, including cantilever CI brackets connecting union 40 mm CP waste fitting and PVC waste pipe with CP PTMT fly nuts of required length pipes etc (overall size 915mm x 460mm with bowl size 410mmx330mmx160mm) complete all as specified and as directed.

S&F for cromium plated Wall mixer 15mm bore with 15mm long bend pipe for connection to over head shower (with Bush & piston diverter fittings) with aerator with all fittings etc complete all as specified and as directed.

S&F in repair brass15mm dia CP mixer for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed.

S&F in repair for 15 mm bore concealed stop cock fancy type chromium plated with long shank and cup complete all as specified and as directed.

S&F as in repair 15mm bore two way long body bib taps cast copper alloy chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed.

S&F in repair 15mm bore bib taps one cast copper alloy chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed complete all as specified and as directed.

S&F 15mm bore overhead rain shower 230mm dia (9'') with all fittings etc complete all as specified and directed.

S&F soap dish cromium plated body and polycarbonate brackets including wall flange and screws etc complete all as specified and directed.

Materials & labour for coloured glazed ceramic tiles of size (300 mm x 200 mm / 350 mm x 250 mm / 450mm x 350mm ) x 7 mm thick as in vertical surfaces such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

M&L screed bed or bedding layer of mortar 20mm thick with CM 1:6 for laying tiles etc complete all as specified and as directed.

M&L for ceramic tiles 7 to 8 mm thick of size 400 x 400 mm, in floors etc. set and jointed in neat cement slorry and pointed in white or coloured cement to match complete all as specified and as directed.

E/M Portion Taking down old unserviceable AC plant including all accessories and connected items all as directed by Engr-in-charge from site and deposite to MES store yard at New military station

Supply , install , commissioning and testing of Air Cooled Packaged Air Conditioners, comprising of Hermetically sealed scroll/as recommended by OEM with microprocessor based control, including copper refirgerant piping, electrtical interconnection between indoor and outdoor units 5.5 TR/66000 Btu/Hr nominal capacity at site conditions complete with semi-hermetic scroll compressors having independent refrigerant circuits & automatic stepless capacity control, Air-cooled S/T type condenser, ASME stamped S/T horizontal flooded type evaporator with carbon steel shell and seamless copper tubes with elastomeric insulation, suitable numbers of squirrel cage induction motor of suitable rating with class 'B' insulation, along with FTNX type propeller type fan necessary drive arrangement, lubrication system as per manufacturer's design required for smooth and trouble-free operation of the air cooled package AC, common base frame, interconnected copper piping along with elastomeric insulation, fittings, valves, expansion valves and accessories to interconnect compressor, condenser, chiller and expansion valve, microprocessor based control panel comprising of controls including sensors and equipped with a LCD touchscreen access input system, protection and monitoring devices to perform control functions , control wiring, vibration isolators, gauge panel, automatic safety controls, pressure switch HP/LP and ozone friendly, CFC-free refrigerant all complete as specified and directed by the engineer-in-charge. Note: The details of Air Cooled Packaged Air Conditioners have been given against Particular Specification Clause No 30 to 30.02 of this tender.

M&L ducts for pakage type Air conditionin of material mild steel,plain,black sheet in wall of thickness of sheet is 1.25mm cladding,steel gates and similar work,cut size,holes punched, including round headed screws,clout nails or rivits and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up ,mitred angles,etc as required complete all as specified and directed.

M&L for duct insulation with resin bonded elastomeric insulation/polyethene of density 24 Kg/Cumm,with factory laminated aluminium vapour barrier thickness of insulation is 25 mm with all accessories as directed by engr in Charge

M&L for plastering of 15 mm thick in CM (1:6) on stone masonary or brick work of even and smooth without using extra cement) complete all as specified and directed.

M&l for two coats of acrylic emulsion distemper over one coat of wall primer including preperation of newly plaster surface complete all as specified and directed.

Material & Labour for point wiring with 1.50 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable of working voltage 1100 volts grade conforming to IS-694 Pt I & II of 2000 drawn through and including non metallic rigid PVC medium grade conduit and conduit accessories (ISI) Marked concealed in wall/fixed to roof, ceiling etc., including provision of 1.5 Sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed single core multi stranded copper conductor cable as earth continuity conductor, fabricated sunken terminal box made out of 1.60mm thick sheet steel painted, concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc., connected to main switch / DBs or common earth dolly for light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and as directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

All as per item No.76 here-in-before but for one socket outlet/metal clad socket of 5 Amps fixed on independent board complete all as specified and as directed by Engineer-in-Charge

All as per item No.76 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board complete all as specified and as directed by Engineer-in-Charge

All as per above item No 76.00 here-in-above socket outlet 5 amps 3 pin on the same board with other switches complete all as specified and directed.

All as per item No 76.00 here-in-above but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for Metal clad socket complete all as specified and directed.

S&F switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as specified and directed.

S&F Switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as specified and directed..

S&F Switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as specified and directed.

S&F in sheet metal enclosure for 8 way Distribution Boards (DB’s), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/lsolators complete all as specified and as directed.

S&F MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and directed.

S&F MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and directed.

S&F LED light fitting 1 x 18 W (4 FT), CRI >=80, CT >=5700K, wall / surface mounted, integrated type, constructed of fire retardant engineering grade extruded plastic & decorative end caps with integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with suitable fixing arrangements complete including 01 No 18 W (4 FT) LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and as directed. Make : Anchor Product Code No 39040 or equivalent of approved make

S & F voltage stablizer for automatic operation, sigle phase naturally oil cooled indoor type & designed for input varitation between 300 Volt to 480 volt with output voltage stabilized at 230 volt with accuracy of ( + - ) 2.5% and of capacity 50 KVA complete all as specified and directed.

S&F sheet metal enclosure tripple pole and neutral enclosure with two pin and earth plug and socket complete with one triple pole Neutral MCB 32 Amps capacity complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less than 1.5 M below ground level connected with galvanised earth wire 4 mm dia by means of bolts nuts check nuts and washers of galvanised iron to earth test point all as specified or indicated including necessary excavation and earth work any type of soil PCC (1:3:6) watering funnel, GI tubing 20 mm for watering complete all as specified and directed and all as shown in electrical plate No.5 of SSR part 1

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25M deep below ground level) with top edge of the plate not less than 1.5 M below ground level connected with GI Strip 32X6 mm dia means of bolts nuts check nuts and washers of galvanised iron to earth test point all as specified or indicated including necessary excavation and earth work any type of soil PCC (1:3:6) watering funnel, GI tubing 20 mm for watering complete all as specified and directed. and all as shown in electrical plate No.5 of SSR part 1.

Supply, Laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cablesed (heavy duty) 1100 Volts with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.

Supply and laying of DWC HDPE pipe,ISI amrked in trenches or in cable ducts or fixed on walls,using clamps along with all accessories like socket,bend,couplers etc confirming to IS 14930,part II complete with fitting and cutting,jointing etc of size 50 mm outer dia complete all as specified and as directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified & as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil complete all as specified and as directed

Removing excavated material (Soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M & L for point wiring (surface type) with 2.5 Sqmm PVC isulated (FRLS) unsheathed single core cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 with multistranded copper conductor drawn in and including PVC rigid non metallic 25mm PVC caping system (double locking) with all casing capping fitting & accessories with PVC polycarbonate rectangular box of suitable size fixed with brass screws and cup washers, including 2.5 Sqmm (normal cross section area) PVC insulatd (FRLS) us sheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB's or common earth dolly for one light/exhaust point controlled by one piano type complete all as specified and directed. Note: Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.

S&F switch socket conbination 3 pin 25 Amp, modular type (ISI marked) with modular surface , 4 module with face/cover plate, 20A switch DP with 1 way indicator 2 module 25 A socket 2 module universal complete all as specified and as directed.

S&F brass tee of outer dia 16 mm dia complete all as specified and as directed.

Supply and laying of CPVC pipe SDR11 & plain CPVC SDR 11 fitting on wall/ceiling or laying in floors etc of outer dia 16mm complete all as specified and as directed.

Material & labour for cutting existingsteel tubing for alternation (each cut measured including screwing existing steel tubing for alternators or additions (or lengthening screw on pipe to form connector) done in position complete all as specified and as directed.

Supply and fix stop valves, cast copper alloy, screwed down, hogher pressure with crutch or butterfly handle, screwed both ends for iron or for unions and fixed to size 15mm complete all as specified and as directed.

S&F bib taps 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safty valve, thermostat, NRV, flexible hot/cold connection piece all as specified and as directed. Make: Havells, Crompton, Bjaja and equivalaent.

Taking down carefully the old unserviceable aluminium/copper point wiring (light, fan, socket or power etc) complete including fixtures and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fittings etc and removing materials for taking credit and making good disturbed surfaces of wall floor etc complete all as specified and directed.

Supply and fix Modular bell push 1 way 6 A,1 module 230 Volts,50Hz, ISI marked complete all as specified and directed.

Supply and fix Bell Multi Music type,complete on 250V,50Hz,Ding dong type complete all as specified and directed.

Supply and fix Modular switch 1 way 6 A,1 module 230 Volts,50Hz, ISI marked all as specified and as directed.

S & F ceiling rose surface bakelite 2/3 terminals complete split switch-1 module& socket-2 Module complete all as specified and directed.

Supply and fix Socket, 6A-2/3 pin combined 2 module 230 Volts,50Hz,cn same board ISI marked complete all as specified and directed.

S&F switch socket combination, 5-in-1, 5/6 Amps on independent board complete split switch-1 module& socket-2 Module complete all as specified and directed.

S&F switch socket combination, 5-in-1, 15/16 Amps complete all as specified and directed.

Supply and fix in replacement LED retrofit lamp B22 holder base with polycarbonate body and aluminium heat sink of 09/10W all as specified and as directed.

Supply & fixing LED light fitting 1 x 20 W, 220 V AC aluminium extruded body with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed. Make: Crompton Cat Part No- CCS-100-20-65-HLL-OP-NWH, Havells Cat Part No- LUMILINEPLUSNEOBS 20WLED857SSYMBOPC, Philips Cat Part No- WT202WLED6SNWPSU52PC

Supply and fixing LED light fitting 1x10W bulk head luminairies including LED light driver holder connecting connecting up with three core flexible copper flexible copper conductor cable of suitable size complete all as specified and directed. Make: Crompton Cat Part No- LBHE-10-WW, Havells Cat Part No- HEXAFT10WLED857SSYMBOPC, Philips Cat Part No- WT202WLED6SNWPSU52PC

Supply & fix LED Mirror light along with fixture, 5 watts with suitable fixing arrangements complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with automatic shutter for dust protection louvers shutter, voltage 230V, 50 Hz, RPM 1300 , copper winding of sweep 250mm complete all as specified and directed.

S&F BLDC fan complete with electronic type regulator and accessories 230V, 1200mm sweep BEE 5 star rated complete all as specified and directed.

M&L for concealed sub-main wiring along with earth wire of size of 2 x 6.0 sq mm + 1 x 6.0 sq mm earth wire, ISI marked FRLS,PVC insulated, multi stranded, copper conductor, single core cable drawn through and incl PVC rigid conduit (medium grade) with all fittings and accessories ISI marked including cutting chases for conduits & sinkings for sunken boxes & making good to walls, floors etc complete including taking down old unserviceable one complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron or steel earth lead wire 4mm dia size by means of nut/bolt and washer of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I 2009 incl necessary excavation and earth work, GI pipe 20mm dia medium grade ISI marked for watering and GI pipe 15 mm dia medium grade ISI marked pipe for protection of GI earth wire etc, PCC chamber with PCC (1:3:6), type C-2, precast RCC cover with reinforced cement concrete (1:2:4) type B1 (20mm graded stone aggregate) reinforced with 8mm dia TMT bar @ 150mm c/c both way with provision of 10 mm dia MS bar handle, funnel, wire mesh, charcoal dust, salt etc connected to DB as indicated including testing complete all as specified and directed.

KAMLESH ENTERPRISE (BID ID -3103189)

M/S S. S CHETTRI AND SONS (BID ID -3102497)

DHARMINDER SINGH (BID ID -3102131)

KARMA TSETEN BHUTIA (BID ID -3102583)

BIJAY MITTAL (BID ID -3102318)

KARMA SHERPA (BID ID -3103075)

MAHENDRA KHAWAS (BID ID -3103010)