PROVN OF SYNTETIC SURFACE AT MILKHA SPORT, SPL REPAIR TO BLDG NO SP-160 AT MILKHA, PROVN OF VIEW CUTTER AT REPTDA IN SUKNA AND WEDENING OF EXISTING DRAINAGE SYSTEM UNDER AGE BR-II AND AGE E/M OF GE SUKNA AT MIL STN SUKNA

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: GARRISON ENGINEER SUKNA

Name of Work : PROVN OF SYNTETIC SURFACE AT MILKHA SPORT, SPL REPAIR TO BLDG NO SP-160 AT MILKHA, PROVN OF VIEW CUTTER AT REPTDA IN SUKNA AND WEDENING OF EXISTING DRAINAGE SYSTEM UNDER AGE BR-II AND AGE E/M OF GE SUKNA AT MIL STN SUKNA

Contract No: GE/SUK/ OF 2025-26

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/ Loose soil complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and not exceeding 1.5 m in depth getting out in soft / loose soil complete all as specified and directed. Cum Excess(+) Full Conversion INR

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. Cum Excess(+) Full Conversion INR

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed. Each Excess(+) Full Conversion INR

M&L Earth filling under floors incl spreading, leveling in layers n.exc 25cm thick including well ramming and watering as reqd. complete all as specified and directed. Cum Excess(+) Full Conversion INR

Removing Excavated soils not exc 50 M and depositing where directed at a level not exc1.5 M above the starting point complete all as specified and directed. Cum Excess(+) Full Conversion INR

M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed. Cum Excess(+) Full Conversion INR

M&L for treating the bottom and sides of excavation at the rate of 5 ltr of anti termite chemical emulsion per Sqm of surface area complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. Cum Excess(+) Full Conversion INR

M&L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. Cum Excess(+) Full Conversion INR

M & L for providing Reinforced cement concrete 1:2:4, Type B-1, Nominal Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. Note-(Reinforcement shall be measured and paid seperately) CUM Excess(+) Full Conversion INR

M&L for Reinforced Cement Concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) in chajja, fascias etc supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately.) Cum Excess(+) Full Conversion INR

M & L for providing Reinforced cement concrete (1:2:4) type B-1 Nominal Mix using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately.) Cum Excess(+) Full Conversion INR

M & L for providing reinforced cement concrete 1:2:4, Type B-1, Nominal Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately.) Cum Excess(+) Full Conversion INR

M&L Precast Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landing, cover slabs (for manholes etc), chullah hoods, chajja, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:6 including necessary forms, moulds etc. complete all as specified and as directed. Cum Excess(+) Full Conversion INR

Supply only integral water proofing compound complete all as specified. Kg Excess(+) Full Conversion INR

M&L PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in gap between roof sheets and brick wall, thickness of concrete bed exc. 5 cm and not exc.10 cm thick & width not exc. width of one brick thick wall including necessary scaffolding and formwork ht upto 7m complete all as specified and directed. RM Excess(+) Full Conversion INR

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan n.exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. Cum Excess(+) Full Conversion INR

M & L for brick work except bricks old size bricks straight or curved on plan n.exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. Cum Excess(+) Full Conversion INR

M&L for 40 mm thick PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) Damp proof course to horizontal or vertical surfaces including applying evenly a coat of blown type bitumen @ 1.50 Kg per Sqm including cleaning of surface and binding with clean dry sand @ 0.05 cum per Sqm including 200 micron Polythene film thick laid on a coat of bitumen primer, @0.30 to @ 0.50 kg per Sqm complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for rough finished flat formwork to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exc. 200 mm thick (horizontal or sloping) work as rough finished surfaces of concrete complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F 5 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L Eight layer acrylic synthetic multi purpose court. (ITF Approved system) (i) Preparation the surface shall be cleaned thoroughly with water to remove all dust & dirt filling up the depressions with chemically based sealer etc. (ii) Primer course Providing and laying one coat of acrylic concrete primer and let it be cured. (iii) Resurfacer course providing and laying two coats of acrylic resurfacer for filling and smoothing asphalt/ concrete surface blended with approved silica sand. (iv) Cushion course providing and laying three coats of cushion creates a smooth cushioned finish in preparation for the texture and finish courses. (v) Texture color course providing and laying one coat of color provides a uniform surface texture and determines the speed of play and traction on the court as per ITF approved system. (vi) Finish color course providing and laying one coat of color will create a vibrant durable finish highly resistant to weather and ultraviolet degradation finidh color as per ITF approved systems. (vii) Lines providing and laying of heavy bodied acrylic latex color white stripping paint comes both textured and un-textured and covers in one application complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F mortice locks suitable for aluminium door of 100 mm size 4 lever aluminium body vertical type as per existing or sample complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F Floor door stopper of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, Overall length of cover plate 150 mm complete all as specified and directed. Each Excess(+) Full Conversion INR

Supply and fix in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs 28 mm curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc with two nos of scoket end caps and brakets (decorative type) for doors/window opening complete all as specified and directed. RM Excess(+) Full Conversion INR

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. Kg. Excess(+) Full Conversion INR

M&L for Mild TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed. Kg. Excess(+) Full Conversion INR

S & F Joist, channel, angle, flat iron or tee sections, fixed independently, with connecting plates, etc. confirming to Fe 410 -W (Gde-250 quality A) complete all as specified and directed. Kg. Excess(+) Full Conversion INR

S & F of structural steel work as in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS – 1161 – 1979 grade St – 240 including fabrication complete all as specified and directed. KG Excess(+) Full Conversion INR

S&F Hard drawn steel wire fabric n.exc 4 kg cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforment complete all as specified and directed. Kg Excess(+) Full Conversion INR

S&F Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. Kg Excess(+) Full Conversion INR

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Kg Excess(+) Full Conversion INR

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L 75 mm thick, PCC 1:3:6, type C-2 (using 20 mm graded crushed stone aggregate) as in sub base, floors, paths, hardstanding finished even and smooth without using extra cement complete all as specified and directed. SQM Excess(+) Full Conversion INR

M&L 100 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base finished even and rough complete all as specified and directed. SQM Excess(+) Full Conversion INR

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in flooring etc., finished concrete surfaces even and rough to receive cement, screed, complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L 10 mm thick Double charge premium quality coloured vitrified ceramic tiles (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L 10 mm thick Double charge premium quality coloured vitrified ceramic tiles (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick backing in CM 1:3 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement with pigment, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces as in floors laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement using WPC compound complete all as specified and directed. Note:- WPC shall be measured and paid separatley. Sqm Excess(+) Full Conversion INR

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M & L for preparation of newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of primer and over a thin layer of wall care putty complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L for preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of cement primer complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L complete removal of existing treatment and preparation of old plastered wall surfaces and including applying two coats of cement base paint over a coat of cement primer complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F 4 mm thick glass including tinted/dark film exc 0.5 sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F 4 mm thick frosted / pin headed glass in ventilator shutters complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Sqm Excess(+) Full Conversion INR

S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on AC building board or commercial plywood and fixed to wooden plugs/PVC rawel plug with chromium plated brass screw and cup washer complete all as specified and directed. Sqm Excess(+) Full Conversion INR

M&L PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in copings, bed plates, bed block for holdfasts, filling in pressed steel door frames, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed. Cum Excess(+) Full Conversion INR

S & F Mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tank and similar work confirming to Fe-290 Gde E-165 Complete all as specified and as directed by Engr-in-Charge. KG Excess(+) Full Conversion INR

S&F 450 MM bore Reinforced concrete pipes, class NP2, laid in trenches and jointed with collars bore in cement and sand mortar 1:1 complete all as specified and directed. (Note :- Excavation & earth work shall be measured separately ). RM Excess(+) Full Conversion INR

M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 450 mm bore pipe complete all as specified and directed. RM Excess(+) Full Conversion INR

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. RM Excess(+) Full Conversion INR

M&L Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. RM Excess(+) Full Conversion INR

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. Cum Excess(+) Full Conversion INR

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed. Cum Excess(+) Full Conversion INR

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. Cum Excess(+) Full Conversion INR

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed. Sqm Excess(+) Full Conversion INR

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. KG Excess(+) Full Conversion INR

Dismantling of cast iron or reinforced concrete drain pipe 450 mm bore jointed in cement mortar and taking out of trenches as required including all connected fitings complete all as specified and directed. RM Excess(+) Full Conversion INR

Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. Per Point Excess(+) Full Conversion INR

M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, modular plate and frame on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch, all necessary cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. Note :- (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Cutting chases shall be included in the unit rate. Per point Excess(+) Full Conversion INR

All as per Sl. item No. 62.00 above but for point wiring modular plate one 5 / 6 Amps socket outlet point on independent board. per point Excess(+) Full Conversion INR

All as per item No. 62.00 here-in-before but one 3 pin socket outlet / 15 amps on the independent board with other switches, with cables 2.5 sqmm size complete all as specified and directed per point Excess(+) Full Conversion INR

All as per Sl. item No. 62.00 above but for point wiring modular plate one 5 / 6 Amps socket outlet point on same board. per point Excess(+) Full Conversion INR

M & L concealed sub main wiring with 2 runs of 4.00 sqmm main wire along with 1 run of 4.00 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. RM Excess(+) Full Conversion INR

M & L concealed sub main wiring with 2 runs of 6.00 sqmm main wire along with 1 run of 6.00 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. RM Excess(+) Full Conversion INR

S&F switch piano modular type one way, 5 / 6 Amps, 240 volt complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F switch piano modular type one way, 15 /16 Amps independent, 240 volt complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F socket outlet modular type 3 pin 5 / 6 Amps, 240 volts combined 2 modular complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F socket outlet modular type 3 pin 15/16 Amps, 240 volts combined 2 modular complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Each Excess(+) Full Conversion INR

M&L for MCB SPN 32/40 Amp, 230V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, 240 V, 50 Hz, 10 kA Suitable for Inductive loads complete with connection complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F MCB TPN 40 to 63 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F in repairs MCB ,SPN DB, 12 ways double door,Metal door, IP-43 IK 09 in 100A rated bus bars,earth bar,neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed Each Excess(+) Full Conversion INR

S&F MCB protected Power unit with one 25 amps socket, (including 3 pin plug top) including MCB DP and starter 25 amps rating with six module plate and flush PVC box and electrically connecting up fixed complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in replacement Double door TPN DBs 4 Way, of powder coated DB's suitable for MCB's fitted with bus bar, neutral link, earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed. Each Excess(+) Full Conversion INR

M&L in replacements earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised iron strip of size 25X4 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I complete all as specified and directed. Note :-No extra payment will be for the earthing strip of size 25X4 mm. Each Excess(+) Full Conversion INR

S&F Exhaust fan 250 mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvres, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Note: The quoted rate is including for taking down and depositing old fan to MES Store. Each Excess(+) Full Conversion INR

Supply and fixing of wall mounted air circulator high flow wave oscillating fan 400 mm (16 inches) with pull cord control,high speed motor for higher air delivery and TOP protection, 60W ,AC single Phase. 230V ,copper winding complete all as specified and diretced. Make :- Havells Swing High Speed Wall Fan / Bajaj / Orient / Crompton Each Excess(+) Full Conversion INR

S&F Single Pole & Neutral enclosure with 2 pin and earth plug & socket for incorporating with single pole 20 Amp DP MCB and including taking down old unsv one complete all as specified and directed by the Engineer-in-charge. Each Excess(+) Full Conversion INR

S&F in replacement Recessed Mounted Square (2'x2') LED Panel light 36 watt with CRCA powder coated housing & high transmittance Opal diffuser for glare free with Electronic LED Driver. IP20, PF =0.95, System Lumens =120 lm/W, 5700k CRI = 80, Operating Voltage range 140 V - 270 V.complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in repairs LED Bulk Head fitting 10 watt with Injection molded polycarbonate housing IP66, IK10, 3.5kV inbuilt surge protection, PF =0.95, total System Lumens not less than 1100 lm, 6500k CRI = 80, Operating Voltage range 140 V - 270 V. complete all as specified and as directed. Each Excess(+) Full Conversion INR

S & F in repairs Surface and wall mounted LED batten 20 watt 4ft long with Aluminum extruded housing , high quality polycarbonate diffuser & integrated Electronic Driver with IP20, PF 0.90, Efficiency not less than 110 lm/W color temp 6500k CRI = 80, Operating Voltage range 140 V - 270 V complete all as specified and as directed. Each Excess(+) Full Conversion INR

Supply and fixing of energy saving LED flood light 250 watt 230 V AC outdoor type, thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant,die cast aluminium housing ,lumen efficacy of minimum 120 Lm/W,min surge protection of 10 kV including taking down old unsv complete all as specified and as directed. Each Excess(+) Full Conversion INR

M&L for Weather proof flat three core PVC insulated and PVC sheathed industrial round 3 core flexible copper cable of size 2.5 Sqmm 1100 volts grade for connection of lights to Pole Box, after dismantling old one complete as specified and directed. Rm Excess(+) Full Conversion INR

Supply and fixing of GI Tubing light grade 15mm dia fixing to pole from JB to security light complete including fixing arrangement to pole with the help of 03 pairs of clamps and nuts bolts complete all as specified and directed. Rm Excess(+) Full Conversion INR

S & F of Pole mounted Junction box with terminals of size 210 x 260 x 117 mm, made of high quality thermoplastic polycarbonate, dust & jet water proof, chemical, acid corrision, impact IK-09, insulated & shock proof IP 66, grey RAL 7035 color with internaly embedded gasket (PUR) , along with cover and metric knockout all sides including back of the base must including terminals 4Nos including fixing arrangement with MS flat of size 40X4mm , nuts , bolt and washers and MCB SP 6-32 Amps 01 No including taking down old unsv complete all as specified and as directed. Each Excess(+) Full Conversion INR

M&L for painting of steel tubular poles 9 mtr height with one coat of aluminium paint from bottom to top including cross arms, GI brackets etc after cleaning and preparing the surface and marking alternate yellow and black strips 30 cm height total 5 Nos with two coats of synthetic enamel point over a coat of primer complete all as specified and as directed. Each Excess(+) Full Conversion INR

M&L for sand coushioning to UG cables (8cm deep before laying of cables and 15 cm over the cable) including spreading, levelling, well ramming in layers complete all as specified and directed. NOTE:- punned thickness of 18cm only will be considered for measurement and payment. Cum Excess(+) Full Conversion INR

M&L for brick protection cover of size 230 x 115 x 75mm to LT underground cables with sub class ‘B’ over brunt brick, (Locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed. Per 1000 No Excess(+) Full Conversion INR

Supply and fixing of GI tubing light grade 40mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor / wall including taking down old unsv complete all as specified and dire RM Excess(+) Full Conversion INR

Supply, laying testing and commissoning of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) LT Cable with stranded aluminium conductor 1100 volts grade of size 10 sqmm 4 core complete all as specified and directed. RM Excess(+) Full Conversion INR

Supply, laying testing and commissoning in replacement of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) LT Cable with stranded aluminium conductor 1100 volts grade of size 35 sqmm 3.5 core including taking down old unsv complete all as specified and directed. RM Excess(+) Full Conversion INR

Supply and fixing of round / square shape 15 watt 220 volts AC (White / warm white on required basis) recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information