PROVN OF HOT WATER SUPPLY IN OTM ACCN AT GUARDS (GRENADIERS) AT POKARAN MIL STN

Amount

S&F electric water heater, storage type steel body with Glass line coated stainless steel inner tank and heating element of 2 KW capacity, 25 litre, BEE 5 Star rated complete including with all accessories such as safety valve, thermostat, NRV, connection piece etc. complete all as specified and directed by Engineer-in-charge.

M&L for Point wiring with 1.5 Sq mm copper conductor single core PVC insulated FRLZ/FRLSH 1100 Volts multistranded drawn through and including rigid PVC Casing and Capping as required at site and conduit accessories of suitable dia medium grade in existing MS boxes duly cleaned as per existing site covered with new suitable sheet 3 mm thick for fixing switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly and making good surface for 3 Pin 15/16 Amps switch socket combination complete all as specified and directed by Engineer-in-charge.

M&L for Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed by Engineer-in-charge. Note :- Two runs of cable, one run of earth wire and one run of PVC conduit will be measured as one unit

S & F sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with locking system complete all as specified and directed by Engineer-in-charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 20 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

All as per ser item No. 5.00 above herein before but for 32 Amps SPN MCB

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth for Stone concrete block or slab walls complete all as specified and directed by Engineer-in-charge.

M&L for cutting holes into or through stone walls built in cement mortar or cement lime mortar and walls of cement concrete for insertion of pipe and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required for not exc 150 Sqcm complete all as specified and directed by Engineer-in-charge.

S&F 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.

All as per ser item No. 9.00 above here-in-before but 20mm bore tubes

S&F bib tap 15 mm dia cast copper alongwith crutch or butterfly handle screwed down CP 15 mm dia fixed complete all as specified and directed by Engineer-in-charge.

S&F stop valve 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed by Engineer-in-charge.

S & F 450 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete all as specified and directed by Engineer-in-charge.

S&F hot water pipe 15 mm bore 'Medium' grade galvanised with all GI fitting duly insulated with glass wool and aluminium cladding with 15 mm complete all as specified and directed by Engineer-in-charge.

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I ,1000 ltr capacity including, 20mm dia Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.

M&L for cross arms bracings supports, clamps and back plates fabricated from structural steel sections incl nuts bolts washers welding, bending cold or hot, drilling holes for bolts in any shpae or size as indicated or directed and inclusive of one primer coat of red oxide zinc chrome primer and two coats of aluminium paint complete all as specified and directed by Engineer-in-charge.

S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed of size 20mm dia complete all as specified and directed by Engineer-in-charge.

M/s Rashid Mohammed (BID ID -3192271)

star electricals (BID ID -3196443)