Sub-Collector Cheranmahadevi

Amount

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (4 points / Coil) Higher End )(DATA 1)

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )(DATA 2)

Rewiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no.6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point (8 points / Coil) Higher End(SD 319)

Renewal by Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting(SD 443)

Renewal by and fixing of 4 Feet 20W LED decorative tube on wall with PVC unsheathed FRLS Copper leads from terminals to the fitting. (Havells Stella glamtube/eq)(DATA 3)

Supply and fixing of surface mounted 7W COB LED downlighter on ceiling with PVC unsheathead copper leads from terminals to the fitting and necessary connection complete. (Philips / Havells / Eq)(DATA 4)

Supply and fixing of LED foot lamp on wall with PVC unsheathead copper leads from terminals to the fitting and necessary connection complete. (Philips / Havells / Eq)(DATA 5)

Renewal by supply and fixing of 1260mm sweep Antique model designer ceiling fan (Usha Fontana Lotus/eq) with 2 module 100W fan step regulator (Higher end) with 300 mm down rod with fan clamp with side plates and cross arm of size 450mm (18")(DATA 6)

supply and fixing of 300 mm (12") sweep (light duty) Ac exhaust fan complete with necessary wall opening and making good of the wall(SD-114)

supply and fixing of louvers shutters arrangements for 300mm (12”) sweep (light duty) AC Exhaust fan. (SD-120)

Supply and fixing of Antique model not less than 16 inch width Chandelier Light suspended on ceiling with necessary accessories (Light & Living make Evergreen model/eq).(DATA 7)

Renewal by Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb (SD 84)

supply and fixing of Decorative wall light, gold finish fixture with cognac hammered glass diffuser suitable for 7.5 W LED filament lamp E27 base on wall with PVC unsheathead copper leads from terminals to the fitting and necessary connection complete. (Havells FLORETINE WL 1LS E27 CGN / Eq)(DATA 8)

supply and fixing of Decorative wall light, gold finish texture with white glass diffuser suitable for 7.5 W LED filament lamp E27 base on wall with PVC unsheathead copper leads from terminals to the fitting and necessary connection complete. (Havells GOBLETO WL 1LS E27 GLD / Eq)(DATA 9)

supply and fixing of 15W 3000K LED downlight pendent mounted on ceiling with PVC unsheathead copper leads from terminals to the fitting and necessary connection complete. (Light & Living make Lifeline smoke Grey pendent model/eq)(DATA 10)

supply and fixing of 3 nos 10W LED track light with 2mtr track on false ceiling with PVC unsheathed copper leads from terminal to the fitting. (havells uno track/eq.)(DATA 11)

Renewal by supply and fixing of IP65 rated Gate light fitting made up of aluminum die cast suitable for E27 base and 9W lamp on Gate pillar with PVC unsheathed copper leads from terminal to the fitting. (Philips azure gate light / eq.)(DATA 12)

Renewal by supply and fixing of 8W LED bollard light fitting with on PCC pedestal with connection complete. (DATA 13)

Supply and fixing of 3nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD 438)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD 402)

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) (SD 144)

Renewal by supply erection, testing and commissioning of 2.0 TR (6000 K.cal/Hr) ABS Plastic Split type Inverter Air conditioner conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with inverter compressor operating on refrigerant of non CFC suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with 3 star rating as per BEE specification and capable of performing the functions 1) Cooling 2) Dehumidifying 3) Air circulating 4) Filtering

The installation work for the above split type AC units inculdes the following 1. Mounting/ Fitting Indoor and Outdoor units at the respective locations. 2. Laying refrigerant pipeline of required length not exceeding 4 metres distance and connecting both units after drilling hole/holes in the wall, if required. Thickness of copper tubing shall not be less than 0.8mm

3. Insulating the suction pipe with expanded polyethelene foam 5mm tubing 4. Laying 20mm dia flexible PVC drain pipe to throw out the condensate water being formed with in the indoor unit. 5. Leakage testing the entire system. 6. Charging refrigerant gas in the unit. 7.Suitable electric wiring to be provided with 2.5 sqmm PVC insulated copper wire between indoor units upto 6 mtrs length and up to switch with in 3 meters of the location of indoor unit. (Carrier / Bluestar / eq) (SOR)

Renewal by Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay (V-Guard/Eq)(SOR)

Renewal by Supply and fixing of MS stand for fixing outdoor unit (SOR)

Supply and laying of 5/8” and 3/8” copper pipe( Extra beyond 3 mtrs supplied with AC unit) (SOR)

Supply and fixing of water drain pipe line (1” PVC Pipe)(SOR)

Renewal by supply and installation of 2000va Automatic sinewave Inverter with inputVoltage range 180V -260V and output Voltage 200V-230V 50HZ with micro controller based design like microtek/ equivalent with 2 Nos 12V -150AH Exide tall tubular battery/ equivalent and testing complete. (Quotation)(MR)

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection(SD 125)

Supply and fixing of 32A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only(SD 148)

Renewal by Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete(SD 131)

Supply and fixing of 63A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double brEak on suitable angle iron frame work with MS cable entry boxes with Earth connection only.(SD 640)

Renewal by supply and fixing of 32A Double pole MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection.[The MCB and metal enclosure should be of Legrand (MDS) / Hager (L&T) make]. (For UPS and street ligfht control) (DATA 14)

Renewal by supply and fixing of 32A FP MCB in sheet enclosure in flush with wall and making good of the concealed portion with necessary earth connection. (The MCB and metal enclosure should be of Higher End). (For pump and RO)(DATA 15)

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting .(SD 457)

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour .(SD 465)

Renewal by supply and fixing of 3 metre aesthetically designed decorative hot dipped galvanised mild steel pole with grey powder finish and 20W LED post top Light fitting with necessary concrete foundation with connection complete.(Luker make pole and crompton Heritage 20W LED post top fitting /eq).(DATA 16)

Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour(SD 55)

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD 65)

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 70)

Renewal by supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour (For AC Plugs and Computer Set plug) (SD57)

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 32A 4P MCB as incoming and 12 Nos 6A to 32A SP MCB as outgoing in flush with wall with Earth connection only. Higher End ( SD 547)

Renewal by supply and fixing of 8way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 5 nos. 32A TP, 9 nos 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (DATA 17)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD 523)

Renewal by supply and run of 4 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm copper wire and making good of the concealed portion with suitable colour (SD 63)

Renewal by supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. (SD 358)

Renewal by supply and Run of 4 of 10 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade on 7/20 GI wire for service connection mains (SD 369)

Renewal by supply and Run of 4 of 10 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in 25mm dia GI pipe (class B ) suitably bent at both ends with necessary angle iron upright and end support for service connection mains (SD 370)

Renewal by Supply and clamping of 4 x 16 sq.mm. aluminium PVC LTUG armoured cable on post or on wall with MS clamps.(SD 204)

Renewal by Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD 667)

Renewal by supply and fixing of brass cable gland for 4 x 16 sq.mm. PVC armoured LTUG cable with earth connection (DATA 19)

Renewal by supply and Laying of 2 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(DATA 18)

Renewal by Supply and clamping of 2 x 16 sq.mm. aluminium PVC LTUG armoured cable on post or on wall with MS clamps.(SD 200)

Renewal by Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection(SD 161)

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work.(SD 222)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection(SD 372)

SRI BALAJI ELECTRICALS (BID ID -1513579)

Ganesh Electricals (BID ID -1513644)

KARTHIKEYAN ELECTRICALS (BID ID -1513744)