Renovation Repair and Periodic maintenance of Hydrographic office and sailing club for setting up CG PRT (E) Training Complex at Timber Pond inside Chennai Harbour under GE (I) (CG) Chennai

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for virtified ceramic coloured tiles ,Premium quality 9 to10 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 20 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for virtified ceramic coloured tiles ,Premium quality 9 to10 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in Vertical etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 , 10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 20 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Glazed coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile not exc. 0.18 sqm in verticals etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 ,10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Taking down chowkhats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkhats or frames with shutters exceeding 1.5 sqm and not exceeding 4.0 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each and taken as credit complete all as specified and as directed.

Supply and fix powder coated aluminium frame for doors, grills, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium door shutters ,,aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 15 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 15 microns.

Supply and fix Plain sheet glass pane 4.00 mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix Plain sheet glass pane 4.00 mm thick ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix in repairs Aluminium alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames complete al as specified and as directed .

Material and labour for Preparation of old wooden surfacesof any description over 10 cm in width or girth and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old plastered surfaces of wall and applying one coat of oil bound distemper over a coat of primer complete all as specified and as directed

Material and labour for 3mm thick Wall Care Putty including cleaning the wall surface with the help of sand paper, putty blade or wire brush and then apply 1st coat on moistened surface and after surface dried , rub gently with wet sponge, then allow the surface dry for 3 hours and similarly apply second coat and leave for 10-12 hours and finally rub with very fine emery paper to obtain glossy surface complete all as specified and as directed. Note:Make of wall putty :Jk White cement/Birla Wall care putty

Complete removal of existing treatment from facias/chajjas,wall et by scrapping through mechancial/manual upto plaster surface, broomin down, washing with water and applying one coat of antifungal paint 100% Acrylic emulsion paint(weather coat) over a coat of primer complete all as specifed and as directed.

Supply & Fix for 20 mm dia stainless steel decorative curtain rod fixing to all opening and joineries portion complete all as specified and as directed.

Material and Labour for stainless steel bracket with end holders complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC Ç'channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles protions ordered to be dismanted complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc and removing rubbish off the premises, removal and depositing servicable materials where directed complete all as specified and as directed

Demolition of reinforced cement concrete as in landing, chajjas, beams and other suspended work all as specified and as directed

Material and labour for Reinforced cement concrete 1:2:4 concrete type B0 using 12.5 mm graded stone aggregate as in repair of chajja, cill, facia, parapet etc. including formwork all as specified

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering in CM 1:6, ,15 mm thick on fair faces of brick work surfaces and mixed with WPC as per manufacuture instructions,finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separtely

Material and labour for Rendering in CM 1:4, ,10 mm thick on fair faces of brick work surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

Material and labour for Preparation of newly plastered wall surfaces including pilasters and cornices and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed.

Preparation of new plaster surface wall etc by scrapping brooming down, washing with water and applying two coat of antifungal paint 100% Acrylic emulsion paint(weather coat) over a coat of primer complete all as specifed and as directed.

Supply and fix Factory made 35 mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail , well seasoned wood, with panel of 9mm B.W.P. commerical ply or 12 mm thick venneered particle borad with commerical veneering on both faces. The size of rail and stile as pern IS 1003 Part-1 kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix Flush shutters 30 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides complete all as specified and as directed.

Material and labour for Prelmainated particle board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamaintations and other side balancing white lamination with lippinge fixed with screws to timber frame as in pelmets in repairs complete all as specified and as directed.Make:Novopan/Kitply/Century

Supply and fix 125 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed

Supply and fix 200 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed

Supply and fix 250mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or entruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed complete all as specified and as directed.

Supply and fix 50 mm butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.

Supply and fix 75 mm butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.

Supply and fix 100 mm butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.

Supply and fix 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

Supply and fix 100 mm long aluminium handles fabricated type anodised complete all as specified and as directed.

Supply and fix 150 mm long aluminium handles fabricated type anodised complete all as specified and as directed.

Material and labour for Preparation of new wooden surfacesof any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old painted surfaces of steel or iron surface materials of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply anfd fix in repairs Vitreous china wash down water closet pan (pedestal pattern ),white (excluding fixing bolts flushing cistern and flush pipe ) including connection to drain pipe and to flushing pipe etc and provision of plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices with including 'P' or 'S' trap complete all as specified and as directed

Supply and fix in repair PVC low level flushing cistern white 10 litres capacity syphonic action type with complete accessories including 32 mm dia CP flush pipe etc., fixed with inlet ball valve,float ,handle and necessary mild steel brackets and connecting to pipes and fixing of chain and pully or lever if any complete all as specified and as directed. .

Supply and fix in repair vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and as directed.

Supply and fixed in repairs stainless steel sink with draining board made out of 1 mm thick for kitchen with plug, washers, waste pipe cast iron cantilever brackets connecting union of overall size 915*460mm with bowl size 410*330*160mm including 32mm bore LDPE waste 1.50mm length complete all as spcecified and as directed.

Supply and fix in repairs 1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I ,ISI Marked including dismantling of old tank and taken as credit complete all as specified and as directed.

Supply and fix in repair 20 mm bore dia Ball brass valves, high pressure, with polyethene float & fly-nut complete, screwed for iron pipe or brass ferrule complete all as specified and as specified.

Taking down old rusted steel water tubing of sizes 15 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse and unserviceable pipes taken as credit complete all as specified and as directed.

Taking down old rusted steel water tubing of sizes 20 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse and unserviceable pipes taken as credit complete all as specified and as directed.

Supply and fix 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix in repair chromium plated fancy type 15mm dia bore Bib tap ,cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.Make: Prayag/Hindware/Cera

Supply and fix in repair Fancy type chromium plated pillar tap, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.Make: Prayag/Hindware/Cera

Supply and fix in repair Fancy type chromium plated stop cock, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.Make: Prayag/Hindware/Cera

Supply and fix in repair Fancy type chromium plated concelead stop cock, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.Make:Prayag/Hindware/Cera

Supply and fix in repair waste fiiting 32mm bore brass chromium plated for glazed ware sink or basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed with 32mm bore PVC Low density polyethylene waste pipe complete all specified and as directed.

Supply and fix in repairs PVC flexible connection 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed.

Material and labour for Cutting holes into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 sq cm but not exc 400 sq cm complete all as specified and as directed.

Dismantling wall and ceiling boards (Fibre,pulp,insulation etc) or insulation boards/slabs/blankets , any thickness including cover fillets and taken as credit complete all as specified and as directed.

S&F powder coated aliminium snap grid frame work (size of grid 605x605 mm) ceiling all as speciifed. Make : Armstrong, shilhouette grid. The following instruction should be follow while making/laying snapgrid:- a) Main 'T' Length = 3600mm, Web = 25mm, Flange = 35mm & thickness = 0.7mm (it is Suspended from the soffit @ 1200mm C/C with level clip). b) Cross 'T' Length = 1200mm, Web = 25mm, Flange = 35mm & thickness = 0.7mm (It is inserted fixed into the slots of main 'T' @ 600mm to from a grid of 1200 x 600mm). c) Cross 'T' : Length = 600mm, Web = 25mm, Flange = 35mm & thickness = 0.7mm (It is inserted fixed into the slots of main 'T' @ 600mm to from a grid of 600 x 600mm). c) Wall angle Web & flange = 25mm, & thickness = 0.7mm fixed to the perimeter wall of the wall portion). d) Level clip with wire : wire dia = 4mm (Used @ 1200mm c/c to hold the main 'T') e) Soffit cleat : Web=25mm Flange= 37& 25mm thickness=1.80mm ( Used at 1200mm c/c to the roul plug to suspended level clip with wire) f) Row Plug : 12.7 diameter ( used @ 1200mm c/c in both c/c in both direction) complete all as specified and as directed.

Material and labour for Hangers 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of G I flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia ,40 mm long complete all as specified and as directed.

Supply and fix 09 mm thick PVC insulation panel with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium complete all specified and as directed.Make:Armstrong/Luxalon by Hunter Douglas Products

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings all as specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make:Tata Blue Scope/Jindal/Llyod

Material and labour for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make:Tata Blue Scope/Jindal/Llyod

Material and labour for Preparation of old plastered or unplastered surface of wall including pilasters and cornice etc and applying one coat of cement base paint complete all as specified and as directed.

Material and labour for Preparation of old plastered or unplastered surface of wall including pilasters and cornice etc and applying two coat of cement base paint complete all as specified and as directed.

Taking down carefully point wiring with copper/aluminium conductor (light,fan, socket or power complete ) and fittings such as switches,ceiling roses,pendents,regulators,sockets,light fittings,calling bell etc and removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully submain wiring with aluminum conductor cable 4/6/2.5/1.5 Sqmm in PVC conduit complete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully unserivce able TPN/SPN DB with MCBcomplete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core drawn into and including non-metallic rigid PVC conduit of 20 mm dia concealed in wall/floor etc along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling/ roof with and including 2mm thick terminal boxes MS sheet flush mounted with 3mm thick laminated hylem sheet for mountling switches, socket, fan regulators etc complete for the following points complete all as specified and as directed. Note: (i)Make of PVC cable : Finolex/ Polycab/Plaza.(ii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex

One light point controlled by one switch

One fan point controlled by one switch

Call bell points

One light point controlled by two way switch

Material and labour for Sub main wiring with two runs single core 6 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 6 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn into and including non-metalic rigid PVC conduit, 25mm dia and conduit accessories concealed/surface of wall/roof/ceiling etc complete all as specified and as directed. Note: (i)Two runs of 6sqmm and one run of 6 sqmm cable and one run of 25mm dia conduit/casing capping shall be measured as one unit length. (ii)Make of PVC cable : Finolex/ Polycab/Plaza.(iii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex (iv) Two different colour cable shall be used for phase and neutral.(v) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with two runs single core 4 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 4 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn into and including non-metalic rigid PVC conduit, 25mm dia and conduit accessories concealed/surface of wall/roof/ceiling etc complete all as specified and as directed. Note: (i)Two runs of 4 sqmm and one run of 4 sqmm cable and one run of 25mm dia conduit/casing capping shall be measured as one unit length. (ii)Make of PVC cable : Finolex/ Polycab/Plaza.(iii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex (iv) Two different colour cable shall be used for phase and neutral.(v) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with two runs single core 2.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 2.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn into and including non-metalic rigid PVC conduit, 25mm dia and conduit accessories concealed/surface of wall/roof/ceiling etc complete all as specified and as directed. Note: (i)Two runs of 2.5 sqmm and one run of 2.5 sqmm cable and one run of 25mm dia conduit/casing capping shall be measured as one unit length. (ii)Make of PVC cable : Finolex/ Polycab/Plaza.(iii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex (iv) Two different colour cable shall be used for phase and neutral.(v) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with two runs single core 15 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 1.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn into and including non-metalic rigid PVC conduit, 25mm dia and conduit accessories concealed/surface of wall/roof/ceiling etc complete all as specified and as directed. Note: (i)Two runs of 1.5 sqmm and one run of 1.5 sqmm cable and one run of 25mm dia conduit/casing capping shall be measured as one unit length. (ii)Make of PVC cable : Finolex/ Polycab/Plaza.(iii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex (iv) Two different colour cable shall be used for phase and neutral.(v) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Supply and fix Switch piano flush type single pole one way 5 A 240 Volts including taking down old unserviceable switches and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Switch piano flush type single pole two way 5 A 240 Volts including taking down old unserviceable switches and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Switch piano flush type single pole two way 15 A 240 Volts including taking down old unserviceable switches and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repair Switch socket combination 2 in 1, 3/5 pin, 5 Amps Flush type 240 Volts including taking down old unserviceable switche socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix in repair Switch socket combination 2 in 1, 3/5 pin, 15 Amps Flush type 240 Volts including taking down old unserviceable switche socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed. Make : Baja/Anchor/HPL

Supply and fix bell push flush type single pole two way 5 AMP

Supply and fix Calling bell ding dong, AC, 240 V, single pole, complete all as specified and as directed. Make:- Bajaj/Philips/HPL

Supply and fix Stepped type electronic fan regulator flush type , 240V on the existing phenolic laminated sheet including taking down old unserviceable one and taken as credit complete all as specified and directed Make :Legrand/Anchor/Rider

Supply and fix sheet metal enclosure powder coated double door for Board distribution with 200 Amps rated bus bar, MCB DB TPN 4 way , 240 Volts including , Disconnecting electric connections, dismantling from position unserviceable DBs and taken as credit complete all as specified and as directed. Make:Indo Asian/L&T/Siemen

Supply and fix MCB TP 160 Amps, 16 KA, 415 Volts of rupturing capacity 36 KA including removing of old unserviceable MCB and taken as credit complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix MCB TP 63Amps, 16 KA, 415 Volts of rupturing capacity 16 KA including removing of old unserviceable MCB and taken as credit complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix sheet metal enclosure powder coated double door for Board distribution with 200 Amps rated bus bar SPN 4 way ,240 V complete all as specified and as directed. Make: Indo Asian/L&T/LEGRAND

Supply and fix sheet metal enclosure powder coated double door for Board distribution with 200 Amps rated bus bar SPN 8 way ,240 V complete all as specified and as directed. Make: Indo Asian/L&T/LEGRAND

Supply and fix MCB TPN 5-30 Amps, 10 KA, 415 Volts including removing of old unserceable MCB complete all as specified and directed.Make:- C&S/HPL/Legrand/Siemen/Schneider/ABB

Supply and fix MCB TPN 5-16 Amps, 10 KA, 415 Volts including removing of old unserceable MCB complete all as specified and directed.Make:- C&S/HPL/Legrand/Siemen/Schneider/ABB

Supply and fix sheet steel enclosure with socket plug top and MCBs complete single pole and neutral enclosure with 3- Pin and earth plug and socket complete with single pole MCB 30 Amp capacity(DBOX COMBO DP) including fixing in walls duly embedded complete all specified as directed. Make:Indo Asian/L&T/Siemen

Supply and Fixing 34 W LED, 4000K High efficiency 2' x 2' recess mounted LED flat panel with high brightness LED for glare-free homogenous illumination mounted sqare slim and elegant downight/panel for indoor application with high aesthetic appeal, available in various wattage for soothing light suitable for grid ceiling with super bright LED Model complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make : Havells cat part No VENUSNEOHE2X2R34WLED840PIRSENSOR or equivalent in Crompton/Bajaj/Surya

Supply and Fix wall/surface mounted LED batten 20W (or nearest higher Wattage) & luminous efficacy more than 100 lm/W with integrated sleek extruded aluminium housing with diffuser. Make : Havells Cat part No LUMILINEBS20WLED856SPCWH or equivalent in Crompton/Bajaj/ Surya.

Supply and Fix wall/surface mounted LED batten 10W (or nearest higher Wattage) & luminous efficacy more than 100 lm/W with integrated sleek extruded aluminium housing with diffuser. Havells Cat part No ENDURALINEARNEOBS10WLED865SPCWH or equivalent in Crompton/Bajaj/ Surya.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth strip of 32x6mm by means of bolts,nuts check nuts and washers of GI all as shown in electric plate No 3 connecting to earthing test point including necssary exacavation in any earth strata , PCC chambers in PCC 1:3:6 type C1, RCC 1:2:4 type B1 cover slab 50mm thick with 8 mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle watering pipe of GI 20 mm dia medium grade, funnels, lug and charcol,salt etc all as applicable and as per plate No 3 of SSR part 1 connecting test point and testing on completion complete and all as specifed and as directed . Notes:-The rates quoted is inclusive of galvanised earth strip of 32x6mm conductor upto a length of 7.5m from the earth pit.

Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 32x6 mm galvanised iron strip complete and all as specifed and as directed

Supply and fix 5 Star rating ceiling fan 1200mm sweep suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connector block using PVC insulated sheathed 3 core cable 0.75sqmm flexible copper conductor and removing of old unserviceable fan and deposited at MES store for BER complete all as specified and as directed Make : Crompton/ Orient /Almonard/Bajaj

Supply and Fix Exhaust fan AC single phase 230/240V of size 300 mm sweep with louver ,Heavy Duty including old unserviceable exhaust fan to be deposited at MES store for BER complete all as specified and directed. (Make: Havells/CG/Almondard)

Supply and Fix Mounted fan AC single phase 230/240V of size 300 mm sweep with louver ,Heavy Duty including old unserviceable exhaust fan to be deposited at MES store for BER complete all as specified and directed. (Make: Havells/CG/Almondard)

VIJAYALAKSHMI ENTERPRISES