Providing elect. 200 KVA T/F and 11 mtr. long solar high mast in shopping centre sector-53 HSVP Gurugram. S/E of PCC poles, ACSR conductor, 200 KVA T/F and 11 mtr. long solar high mast in shopping centre sector-53 Gurugram

[13.27]Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

[13.32] Providing and fixing bolts including nuts and washers complete.

[24.1.2]EARTHING AND LIGHTENING ARRESTOR. Extra for using salt and char coal/coke for pipe earth electrode as required.

[24.1.6]EARTHING AND LIGHTENING ARRESTOR . Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required.

[24.3.4.2]HT CABLE 4.2. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 150 to 185 sqmm

[6.1.1]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

[24.13.62]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 95 Sq mm 3.5 core (Arm.)

[24.16.7]HT CABLES (Aluminium Conductor, Armoured and Unarmoured) Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in Existing Pipe/Trenches/Surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 7. Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in Existing Pipe/Trenches/Surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 185 Sq mm 3 core

NS) Supply and erection of PCC pole as per IS: 1678-1960 specification, 9mtr long PCC pole 105mmx115mm at top and 105mm x315mm at bottom with working load of 200 kg buried 1.5 in ground as per DHBVNL specification.

NS) Supply and erection of PCC pole as per IS: 1678-1960 specification, 11 mtr long 152mm x203mm at top and 152mm x368mm at bottom with working load of 360kg buried 1.8 in ground as per DHBVNL specification.

NS) Supply and erection of ACSR conductor of 80 Sqmm sizes ISI marked complete in all respect as ISS:398 P-I and II, 1976 with latest amendments upto the entire satisfaction of engineer in charge of the work.

NS) Supply and erection of M.S.D strap made out of 50x6mm M.S. Flat having suitable holes and other accessories to fit it properly as per HSVP drawing/specification upto the entire satisfaction of Engineer-in-Charge.

NS) Supply and erection of 300 sqmm x 1 core alum. Conductor PVC insulated cable as per ISS : 1554/P-I complete in all respect upto the entire satisfaction of engineer-in charge of work.(.Make Havells,Polycab.Grandly )

NS) Supply and erection of wooden cleats of size 4” wide and 1’6” long complete with 4 Nos holes suitable to pass through 300/400 Sqmm single core cable complete in all respect up to the entire satisfaction of engineer in charge.

NS) Supply and erection of GI pipe for transformer earthing 40 mm dia (B-class) with 12 mm dia. holes in 100 mm dia bore in earth up to moisture level using proper earth electrode upto full length suitable for pole mounting substation, earthing should be designed with regards to max likely earth fault current.

NS) Supply, installation, testing, commissioning and handing over 3 Phase, 11KV/433-250V, 200 KVA oil immersed natural cooled type (ONAN) Alum. wound outdoor type(4 star) Energy Efficiency Distribution transformers as per IS 2026-1977 up to the entire satisfaction of engineer in-charge of work.

NS) Supply and erection of 11 KV 400 amp. GO switch vertical mounted type and suitable for 11 KV system confirming to ISS 1818/1972 or accordance with IS:9921 complete in all respect including GI pipe, handle,M-5 steel frame and other accessories upto the entire satisfaction of engineer in-charge of the work.

NS) Supply and erection of LT fuse unit suitable for 200 KVA transformer including cost of MS clamps Nut and Bolts etc. complete in all respect upto entire satisfaction of engineer-in charge of work.

NS) Supply and erection of 11 KV brown glazed 10 KN pin insulator with GI pin / silicon type as per specification and approved make by DHBVNL complete in all respect

NS) Supply and erection of GI chain link (Mesh Jali) fencing consisting of MS angle duly embedded in ground with cement concrete 1:3:6 complete in all respect as per the entire satisfaction of engineer in charge of the work.

NS) Horizontal Trenchless boring for laying of HDPE pipe 160 mm dia. (PE-63) NP-4 to avoid cutting of road and other metaled portion.

NS) Supply and erection of ACSR conductor conforming to IS 38 (part-II) 1976/1996, IS 4826-1976 IS 1521-1972 and 1778-1980 with latest amendments and erection of the same with accessories including stringing and sagging of conductor of various sizes 20sqmm PVC insulated as well as joining and binding with insulator at supports in all respect upto the entire satisfaction1n of engineer in charge.

NS) Supply and Erection of HDPE loose 160mm dia (PE-63) NP-4 for laying of underground cable of 95 to 400 Sqmm X 3 core XLPE armoured cable complete in all respect.

NS) Supply and erection of LT shackle insulator brown glazed size 90mm x 75mm type-I suitable for 415/240 volts confirming to IS 1545/1977 with latest amendment thereof. complete in all respect upto the entire satisfaction of engineer in charges

NS) Supply and Executed of 11 M long Solar High Mast Light System including accessories:- All in One integrated Solar Light: 85 Watts 8 Numbers of 85 Watts each Solar System is equal to 680 Watts Total Light Power. Lighting Time: 13 hours, 4 days back during rainy days LED source: LED chips and qty.: Philips 3030, 5 layer x 250grains (200 LED chips) LED light intensity: 155-165Lm/W Total lumen: 7300 Lm Colour temperature: 6000-6500K, cool white Light angle: 1200 Lamp body material: Aluminum alloy Lifespan: )50000 Hours Lamp body dimension: 1480 x 390 x 50mm Battery and Controller: Lithium Battery: 12.8V life PO4 Lithium battery Capacity: 12.8V 52AH Nominal voltage: 12.8V Overcharge voltage: 14.4V Discharge voltage: 11.2V Deeply cycle: 1200-1500 time, )80% Operation temperature: )-15’C-60’c Controller: MPPT, 15A IP67 Automatic light and times control Solar Panel Solar panel type: Mono-crystalline solar panel Solar panel capacity: 18V 110W Charging time: 3 to 4 Hrs with advance technology Solar panel size: 1470x360mm Generation ability: )20Yrs. 11 Mtr. High Mast pole: Base Plate 500 OD mm x 25mm Bottom dia-300mm, Top dia: 150mm Thickness -4mm, Lantern carriage for 8 fittings, Head Frame Thumbells, D Clamps, Hardware items to fix mini mast, hot dip galvanization. Pipe diameter: 60mm Lighting control: light control plus time control, full power Lighting time/night: 13 hrs. 4 days backup during rainy days Foundation Foundation with bolt size of M24x700mm in “L” shape including 6 foundation bolts with a template of 380 ODx3mm and 2 nuts and 2 plain washer. Full concrete foundation with sand and cement in 5 feet width and 2 feet length. Ring bracket (Providing top round for fixing the solar fittings and required equipments.) Ring Bracket: Providing Top Round for Fixing the Solar fittings and Required Equipments.