Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹38.2 LAccepted-Finance | 1 | Accepted-Finance Lowest Quoted bidder, hence accepted | |
| 2 | 2₹42.2 L+₹4.1 L (10.7%)Accepted-Finance | 2 | Accepted-Finance Second Lowest Quoted bidder, hence accepted | |
| 3 | 3₹44.4 L+₹6.2 L (16.4%)Accepted-Finance | 3 | Accepted-Finance Third Lowest bidder, hence accepted | |
| 4 | 4₹44.8 L+₹6.7 L (17.5%)Accepted-Finance | 4 | Accepted-Finance Fourth Lowest Quoted bidder, hence accepted | |
| 5 | 5₹48.0 L+₹9.8 L (25.8%)Accepted-Finance | 5 | Accepted-Finance Fifth Quoted Bidder, Hence accepted |
| Sl No | Description | Qty | Unit | KUMARAN INDUSTRIES L6 | V BEST ENGINEERS L5 | Shuruthi Engineering L3 | SATHIYA INFRA TECH L4 | Alagammai Electricals L10 | JAYARAJ L8 | SCHNELL ENERGY EQUIPMENTS PVT LTD L11 | ANNAI ELECTRICALS L2 | SHREE JAYALAKSHMI ELECTRICALS L1 | K NAGENDRAN L7 | Chandrasekaran R L9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Design, supply, erection, testing, commissioning and handing over of 16 mtrs High Mast Structure with required number of continuously tapered hot dip galvanized steel polygonal sides sections with telescopic strip joints to a total height of 16 metres capable of sustaining the maximum wind pressure at the erection site with single flange base plate secured welded in the bottom of the base mast section with vertically movable hot dip galvanized lantern carriage and accessories such as electrical junction box brackets for providing 8 Nos. of flood light luminaries with control gear box complete head frame assembly, Pulley drive, stainless steel wire rope single/double drum self-lubricating winch arrangement suitable for raising and lowering the luminaries carriage ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and anchor plates and templates including supply and fixing the following accessories in the Mast. | 1 | No | 3,00,000 ₹3,00,000 | 2,86,000 ₹2,86,000 Lowest | 4,50,000 ₹4,50,000 | 4,75,000 ₹4,75,000 | 3,92,256.5 ₹3,92,256.5 | 4,03,521 ₹4,03,521 | 3,63,380 ₹3,63,380 | 4,00,000 ₹4,00,000 | 3,20,000 ₹3,20,000 | 3,89,737.8 ₹3,89,737.8 | 3,99,244 ₹3,99,244 |
| 1.01a) Design and casting of suitable foundation with 1:2:4 mix RCC concrete with 30 cm projection above the ground level with 1 metre Width x 1 metre Length and 2 metre depth with necessary galvanized foundation bolts nuts and washers and dump plate enclosing the bolts for the High Mast considering the safe soil bearing capacity at site - 1 set. b) High powered power tool complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V 50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch - 1 Set | ||||||||||||||
| 1.02d) Neon aviation obstruction light - 1 No e) 2 Nos of special GI earth electrodes with copper plate 300 mmx300 mm x 3mm and copper flat (1”x1/4”) interconnection as per ISS complete with earth connection - 1 set. f) Hot dip galvanized lightning arrestor - 1 No.g) Flood light luminaries of specially Heavy type water poof Dust proof integral luminaries fitting provided with 8 nos 150 Watts LED Light fitting Higher end make with 150W LED Bulb with drives, Alglas coated reflectors, with cable connection etc. complete as per standard specification. | ||||||||||||||
| 2.00 | Supply and erection of 8mtr. Single arm bracket octagonal pole of free standing with continuously tapered structure made up of HT sheet steel designed to withstand wind velocity as per IS – 875 hot dip galvanized both internally and externally confirming to BESN. ISO 1461 (65 micron thickness). The octagonal pole shall be erected on concrete foundation with bolt of suitable size and HT steel pole having a base plate of suitable size with locking arrangements at the bottom along with 1 mtr Single Arm bracket with following pole specification. Height of pole: 8000 mm
Bottom dia:130 mm Top dia : 70 mm
Thickness: 3 mm Bracket : 1000 mm | 44 | Nos | 31,800 ₹13,99,200 | 28,750 ₹12,65,000 | 15,500 ₹6,82,000 Lowest | 27,900 ₹12,27,600 | 30,045.5 ₹13,22,002 | 37,670 ₹16,57,480 | 44,365 ₹19,52,060 | 33,000 ₹14,52,000 | 35,000 ₹15,40,000 | 36,389.14 ₹16,01,122.16 | 37,277 ₹16,40,188 |
| 2.01The octagonal pole with Single arm bracket having 1 No of 120W LED Street light with collar pipe having 350 mm length welded suitably with bracket and fixed rigidly with 4 Nos Bolt and nuts to prevent any turning movement of bracket due to wind by Clamping on Bridge Wall with PCD Adaptor with necessary service wires from fuse box to the fitting with 1.5 sqmm PVC insulated copper wire with necessary connection. The junction box provided with 1No 4 way Connector with Hylum sheet with 1No 6 A SP MCB with backlite sheet and standard type terminal with connections complete, Testing and commissioning as directed by the departmental officers. | ||||||||||||||
| 3.00 | Supply and erection of 8mtr Double arm bracket octagonal pole of free standing with continuously tapered structure made up of HT sheet steel designed to withstand wind velocity as per IS – 875 , hot dip galvanized both internally and externally confirming to BESN. ISO 1461 (65 micron thickness) .The octagonal pole shall be erected on concrete foundation with bolt of suitable size and HT steel pole having a base plate of suitable size with locking arrangements at the bottom along with 1 mtr Double Arm bracket with following pole specification.
Height of pole: 8000 mm Bottom dia:130 mm Top dia : 70 mm
Thickness: 3 mm Bracket : 1000 mm | 12 | Nos | 32,700 ₹3,92,400 | 29,450 ₹3,53,400 | 18,000 ₹2,16,000 Lowest | 33,900 ₹4,06,800 | 30,885 ₹3,70,620 | 48,428 ₹5,81,136 | 47,785 ₹5,73,420 | 49,000 ₹5,88,000 | 40,000 ₹4,80,000 | 46,773.62 ₹5,61,283.44 | 47,914 ₹5,74,968 |
| 3.01The octagonal pole with Double arm bracket will have 1 No of 120W LED Streetlight and 1No 80W LED Street Light with collar pipe having 350mm length welded suitably with bracket and fixed rigidly with 4 Nos Bolt and nuts to prevent any turning movement of bracket due to wind by Clamping on Bridge Wall with PCD Adaptor with necessary service wires from fuse box to the fitting with 1.5 sqmm PVC insulated copper wire with necessary connection. The junction box provided with 1 No 4 way Connector with Hylum sheet with 1 No 6A SP MCB with backlite sheet and standard type terminal with connections complete. Testing and commissioning as directed by the departmental officers. | ||||||||||||||
| 4.00 | Supply and Clamping of 4 x 16 sq mm PVC LTUG armoured cable through 32 mm dia GI pipe(Class-B) on post or on wall with Clamps . | 2,600 | Mtrs | 403 ₹10,47,800 | 500 ₹13,00,000 | 580 ₹15,08,000 | 520 ₹13,52,000 | 463 ₹12,03,800 | 439 ₹11,41,400 | 365 ₹9,49,000 | 352 ₹9,15,200 | 250 ₹6,50,000 Lowest | 429.68 ₹11,17,168 | 440 ₹11,44,000 |
| 5.00 | Supply, erection, testing and commissioning of Dust and Vermin Proof Outdoor Pillar box for Three phase Automatic street light controller of suitable size made up of 16 SWG CRCA Sheet with outer body with doors, Supports, Separations, Canopy etc., With suitable angle iron base for housing three phase 63A 4way Vertical DB, Digital Weekly Programmable Timer Switch with Shortest Switching Time One Minute With Battery Back Up, 63A three Phase Contactor, Etc. Confirming IE Rules and Standards and Supply and Fixing of Vertical Type 4 Way Triple Pole and Neutral MCB DB in Sheet Steel Enclosure Double Door Metal Cover with IP 42 Protection with 1 No 63A 4 Pole MCB as incoming and 4 Nos 32A TP MCB as Outgoing with earth Connection and with necessary Internal Wiring. | 2 | Nos | 48,000 ₹96,000 | 43,556 ₹87,112 | 50,000 ₹1,00,000 | 34,000 ₹68,000 | 1,38,377 ₹2,76,754 | 29,114 ₹58,228 | 46,000 ₹92,000 | 26,026 ₹52,052 Lowest | 30,000 ₹60,000 | 28,119.44 ₹56,238.88 | 41,093 ₹82,186 |
| 5.01The Pillar Should be Provided with Lock and Key Arrangements and with one Coat of red Oxide Primer Paint and Two Coats of Simens Grey Approved by Department Officers along with Danger Board, Supersciption (Lettering and Numbering) and The Pillar Box Should be Mounted with suitable angle iron frame work on concrete foundation with necessary Bolts and Nuts etc. | ||||||||||||||
Tender Value
₹56.8 L
EMD Value
₹38,400
Closing Date
5 Aug 2026, 4:00 pmClosed
Superintending Engineer
Office of Superintending Engineer, PWD, Buildings C and M Circle, PWD Campus, Tiruvarur-1.
Providing Lighting Arrangements to the Road Over Bridge in Lieu of LC No.16 at KM 16/8 of Mayiladuthurai - Thiruvarur- Thiruthuraipoondi Road (State Highways 23) in between Railway KM 15/100-15/200 near Peralam Railway Yard in Thiruvarur District
2026_PWD_685991_1
05-01/ BCM/TVR/2026-27
Open Tender
Electrical Works
Lump-sum
90 days
Peralam
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹38,400
11 Aug 2026
16 Jul 2026
6 Aug 2026
16 Jul 2026
5 Aug 2026
16 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Design, supply, erection, testing, commissioning and handing over of 16 mtrs High Mast Structure with required number of continuously tapered hot dip galvanized steel polygonal sides sections with telescopic strip joints to a total height of 16 metres capable of sustaining the maximum wind pressure at the erection site with single flange base plate secured welded in the bottom of the base mast section with vertically movable hot dip galvanized lantern carriage and accessories such as electrical junction box brackets for providing 8 Nos. of flood light luminaries with control gear box complete head frame assembly, Pulley drive, stainless steel wire rope single/double drum self-lubricating winch arrangement suitable for raising and lowering the luminaries carriage ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and anchor plates and templates including supply and fixing the following accessories in the Mast. | 1 | No | - | - |
| 1.01 | a) Design and casting of suitable foundation with 1:2:4 mix RCC concrete with 30 cm projection above the ground level with 1 metre Width x 1 metre Length and 2 metre depth with necessary galvanized foundation bolts nuts and washers and dump plate enclosing the bolts for the High Mast considering the safe soil bearing capacity at site - 1 set. b) High powered power tool complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V 50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch - 1 Set | - | - | - | - |
| 1.02 | d) Neon aviation obstruction light - 1 No e) 2 Nos of special GI earth electrodes with copper plate 300 mmx300 mm x 3mm and copper flat (1”x1/4”) interconnection as per ISS complete with earth connection - 1 set. f) Hot dip galvanized lightning arrestor - 1 No.g) Flood light luminaries of specially Heavy type water poof Dust proof integral luminaries fitting provided with 8 nos 150 Watts LED Light fitting Higher end make with 150W LED Bulb with drives, Alglas coated reflectors, with cable connection etc. complete as per standard specification. | - | - | - | - |
| 2 | Supply and erection of 8mtr. Single arm bracket octagonal pole of free standing with continuously tapered structure made up of HT sheet steel designed to withstand wind velocity as per IS – 875 hot dip galvanized both internally and externally confirming to BESN. ISO 1461 (65 micron thickness). The octagonal pole shall be erected on concrete foundation with bolt of suitable size and HT steel pole having a base plate of suitable size with locking arrangements at the bottom along with 1 mtr Single Arm bracket with following pole specification. Height of pole: 8000 mm
Bottom dia:130 mm Top dia : 70 mm
Thickness: 3 mm Bracket : 1000 mm | 44 | Nos | - | - |
| 2.01 | The octagonal pole with Single arm bracket having 1 No of 120W LED Street light with collar pipe having 350 mm length welded suitably with bracket and fixed rigidly with 4 Nos Bolt and nuts to prevent any turning movement of bracket due to wind by Clamping on Bridge Wall with PCD Adaptor with necessary service wires from fuse box to the fitting with 1.5 sqmm PVC insulated copper wire with necessary connection. The junction box provided with 1No 4 way Connector with Hylum sheet with 1No 6 A SP MCB with backlite sheet and standard type terminal with connections complete, Testing and commissioning as directed by the departmental officers. | - | - | - | - |
| 3 | Supply and erection of 8mtr Double arm bracket octagonal pole of free standing with continuously tapered structure made up of HT sheet steel designed to withstand wind velocity as per IS – 875 , hot dip galvanized both internally and externally confirming to BESN. ISO 1461 (65 micron thickness) .The octagonal pole shall be erected on concrete foundation with bolt of suitable size and HT steel pole having a base plate of suitable size with locking arrangements at the bottom along with 1 mtr Double Arm bracket with following pole specification.
Height of pole: 8000 mm Bottom dia:130 mm Top dia : 70 mm
Thickness: 3 mm Bracket : 1000 mm | 12 | Nos | - | - |
| 3.01 | The octagonal pole with Double arm bracket will have 1 No of 120W LED Streetlight and 1No 80W LED Street Light with collar pipe having 350mm length welded suitably with bracket and fixed rigidly with 4 Nos Bolt and nuts to prevent any turning movement of bracket due to wind by Clamping on Bridge Wall with PCD Adaptor with necessary service wires from fuse box to the fitting with 1.5 sqmm PVC insulated copper wire with necessary connection. The junction box provided with 1 No 4 way Connector with Hylum sheet with 1 No 6A SP MCB with backlite sheet and standard type terminal with connections complete. Testing and commissioning as directed by the departmental officers. | - | - | - | - |
| 4 | Supply and Clamping of 4 x 16 sq mm PVC LTUG armoured cable through 32 mm dia GI pipe(Class-B) on post or on wall with Clamps . | 2,600 | Mtrs | - | - |
| 5 | Supply, erection, testing and commissioning of Dust and Vermin Proof Outdoor Pillar box for Three phase Automatic street light controller of suitable size made up of 16 SWG CRCA Sheet with outer body with doors, Supports, Separations, Canopy etc., With suitable angle iron base for housing three phase 63A 4way Vertical DB, Digital Weekly Programmable Timer Switch with Shortest Switching Time One Minute With Battery Back Up, 63A three Phase Contactor, Etc. Confirming IE Rules and Standards and Supply and Fixing of Vertical Type 4 Way Triple Pole and Neutral MCB DB in Sheet Steel Enclosure Double Door Metal Cover with IP 42 Protection with 1 No 63A 4 Pole MCB as incoming and 4 Nos 32A TP MCB as Outgoing with earth Connection and with necessary Internal Wiring. | 2 | Nos | - | - |
| 5.01 | The Pillar Should be Provided with Lock and Key Arrangements and with one Coat of red Oxide Primer Paint and Two Coats of Simens Grey Approved by Department Officers along with Danger Board, Supersciption (Lettering and Numbering) and The Pillar Box Should be Mounted with suitable angle iron frame work on concrete foundation with necessary Bolts and Nuts etc. | - | - | - | - |
stage.html
html • 0.05 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.55 MB
Thiruvarurbridegcondition.pdf
Tender Documents • 1.25 MB
BOQ_824590.xls
BOQ • 0.32 MB
corrigendumnoticefiveee.pdf
PDF • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .