Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹20.8 L+₹2.0 L (10.8%)Rejected-Finance PHAYANG GOMPA COMPLEX AGLING ROAD SKALZANGLING LEH LADAKH J K 194101 | LEH | LEH | LADAKH | 194101 | L2 | Rejected-Finance Rejected being other than L1 | |
| 3 | L3₹21.2 L+₹2.4 L (12.8%)Rejected-Finance 303 MAHESH NANGIA 303 PRAGATI CHAMBERS RANJIT NAGAR COMMERCAIL COMPLEX RANJIT NAGAR COMMERCIAL COMPLEX | L3 | Rejected-Finance Rejected being other than L1 | |
| 4 | L4₹22.2 L+₹3.4 L (18.3%)Rejected-Finance HOUSE NO 102 LANE NO 4 C ANAND NAGAR BOHRI JAMMU 180002 J K | JAMMU | JAMMU AND KASHMIR | 180002 | L4 | Rejected-Finance Rejected being other than L1 | |
| 5 | L5₹23.4 L+₹4.6 L (24.7%)Rejected-Finance H NO 1346 SECTOR 13 P HISAR 125005 HARYANA | HISAR | HISAR | HARYANA | 125005 | L5 | Rejected-Finance Rejected being other than L1 |
Tender Value
Refer Docs
EMD Value
₹84,000
Closing Date
19 May 2021, 6:00 pmClosed
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
REPAIR MAINT AND SERVICING OF DG SETS AND CONNECTED WORKS AT GH OTM CESR ENGR REGT HQ 138 WE FPD MTF AND ADJACENT AREA UNDER GE 865 EWS
2021_MES_439157_1
865/EWS(NIT-13)/2021-22
Open Tender
Civil Works
Item Rate
180 days
GE 865 EWS
As per tender documents and as per policy in vogue
8 documents required · 8 mandatory
₹500
GE 865 EWS
₹84,000
Yes
20 Jun 2021
28 Apr 2021
21 May 2021
28 Apr 2021
19 May 2021
12 May 2021
Amount
M&L for Checking, Inspection, maintanance and servicing complete including replacement of unserviceable spare parts of the DG set (comprising of Engine/ Alternator/ Control panel) of the following capacity for smoth functioning complete all as per manufacturers instructions and all as directed by Eng-in-Charge . (a) Checking of lubricating oil condition (b) Checking engine for oil, water leakage and correcting the same (c) Checking of all the nut bolts of engine and alternator (d) Checking of all belts and adjust the tension properly (e) Cleaning of air filters (f) Checking and readjusting the valve clearance (g) Change of Oil/Fuel filters and engine oil if necessary (h) Checking of starter motor battery and charger (i) Checking of cooling system and fuel system (j) checking of all power cables and AVR connections and mounting bolt tightnees of alternator (k) checking the function of AVR genaral checks (l) Checking of control panel meters and gadgets functiong (m) Checking of all control and safety wirings B. (a) Checking of flexible coupling of engine and alternator (b) Cleaning of crank case ventilation pipe (c) Checking of injectors and fuel pump (d) Checking of alternator and carbon brushes of following capacity DG sets NOTE (1) Cost of Spare parts required will be paid and measured separately (2) Servicing/routine check up carried out through authorised service centre of manufacturer (3) Make of spare recommendation by auth service centre of manufacturer.
400/380 KVA DG Sets
320 KVA DG Set
200 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG set
25 KVA DG set
S&F in replacement of Air Cleaner Assembly (inner & outer) suitable for following capacity of DG Set Make Kirlosker/Cummins/ Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
200 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG set
25 KVA DG set
S&F in replacement of Fuel filter Element (Primary & Secondary) for following capacity of DG Sets Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
200 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG set
25 KVA DG set
S&F in replacement of Oil Filter Element with 'O' ring washer for DG Sets of following capacity Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge Make :- Kirloskar/Mico/TVS
400/380 KVA DG Sets
320 KVA DG Set
200 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG set
25 KVA DG set
S&F in replacement of 'V' belt for radiator/water pump suitable for following capacity DG Sets Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
200 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG set
25 KVA DG set
S&F in replacement of fuel pipe with banjo bolt at both side suitable for following capacity DG sets Make Kirlosker/Cummins/ Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
200 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG set
25 KVA DG set
S&F in replacement of Dynamo for following capacity DG Sets Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
200 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG set
25 KVA DG set
M & L for changing /toping up of best quality of engine oil 20W40 type for various type/capacity DG sets including removing of old burnt engine oil from DG Sets complete all as specified and directed
Supply only cotton waste for daily use for cleaning the DG sets complete all as specified and directed.
Supply only batteries distilled water for the DG sets at all area of Sector 'B', complete all as specified and directed.
Supply only batteries electrolyte for the DG sets at all area of Sector 'B', complete all as specified and directed.
S&F in replacement of automatic voltage regulator (AVR) 240 volt suitable for following capacity of DG Sets Make Kirlosker/Cummins/ Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG set
25 KVA DG set
M& L for Replacement of water pump assembly for following capacity DG sets Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG Set
25 KVA DG set
Supply and replacement of self starter for following capacity DG Set Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG Set
25 KVA DG set
Replacement of Turbo charger assy.for following capacity DG sets Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
160 KVA DG Set
125/100 KVA DG Set
63 KVA DG Set
25 KVA DG set
M&L for Replacement of Fan Hub assembely for following capacity of DG Set Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG set
25KVA DG set
M & L for taking out burnt winding of exciter of following capacity of DG Sets including re-winding copper wire of super quality, of existing size, No of turns, varnishing, heating complete including testing on full load to entire satisfaction of Engr in Charge.
400/380 KVA DG Sets
320 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG set
25 KVA DG set
M & L for dismantling the defective radiator assembly and taking it to contractor workshop for cleaning of radiator, finding the leakage by pressure method and providing leak proof treatment to defective radiator assembly by welding /brazing/glazing suitable for cohesiveness for following capacity DG Sets cleaning radiator by using Keroscene oil and radiator cleaning solution (Ready to Wash) by pressure of pump and brush and Re-assembling after painting of the same complete all as specified and directed by Engr-in-Charge.
400/380 KVA DG Sets
320 KVA DG Set
200 KVA DG Set
160 KVA DG Set
125 KVA DG set
100 KVA DG set
63 KVA DG set
25 KVA DG set
Supply & fixing in replacement of DC wiring of control panel of following capacity of DG Sets Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
160/200 KVA DG Set
125/100 KVA DG Set
63 KVA DG set
25 KVA DG set
Supply & fixing in replacement of Hose Pipe of following capacity of DG Sets Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Set
160/200 KVA DG Set
125/100 KVA DG Set
63 KVA DG set
M&L for disconnecting the U/S DC alternator of following capacity DG Set, 3 Phase any make & type form engine, transporting to workshop dismantling it for repairing and rewinding by taking out burnt armature winding aleading the alternator coil with existing gauge/size of super enamelled copper wire, providing new insulation, sleeves, varnishing cotton taping etc reassembling the alternator complete including aligning with engine and testing in all aspects for smooth functioning all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Sets
160 KVA DG Set
125 KVA DG set
100 KVA DG set
63 KVA DG set
25 KVA DG set
Note: Re-assembling all the component of the alternator and mounting the same on the existing foundation including welding of alternator foundation plate by electric arc welding ,aligning the alternator with engine and testing on full load as specified in particular specification and as directed by Engr-in-Charge.
Supply and Replacement of lub oil pump suitable for following Capacity DG Sets Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Sets
160 KVA DG Set
125 KVA DG Set
100 KVA DG set
63 KVA DG set
25 KVA DG set
S&F in replacement of Synthetic Insulating mat of Size 2Mx1Mx10MM complete all as specified and as directed.
S&F in replacement of oil pressure gauge DG set of cap up to 1010 KVA complete all as directed by Engr in Charge.
Earthing complete with galvanised iron earth plate electrode 600x600x6mm buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of earth plate not less than 1.5mtr below normal ground level, connected with 25x4 mm size GI strip as earth lead, by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15, type B-1 in pit with precast RCC M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates) in cover reinforced with XPM not less than 4.0 Kg per Sqm, test point etc. all as shown in electric plate No-3 of SSR Part-I (2009), complete with necessary earth work in any type of soil, removal to a distance not exceeding 50mtr, including testing on completion, complete all as specified and as directed by Engineer-In-Charge. Note: Earth pit chamber and RCC pit cover shall be painted with two coats of red synthetic enamel paint over one coat of primer including preparing of surfaces.
Supply and Replacement of Thermostate valve suitable for following Capacity DG Sets Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Sets
320 KVA DG Sets
200 KVA DG Set
160/140 KVA DG Set
125/100 KVA DG Set
25 KVA DG set
Supply and Replacement of Oil seal front and rearsuitable side for following Capacity DG Sets Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Set
320 KVA DG Set
160 KVA DG Set
125 KVA DG set
63 KVA DG set
Supply and lay in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 185 SQMM 3.5 core Make : Cable Corporation of India/Finolex Cable Co/Polycab/GlosterHavells/KEI/ RR Kabel
Supply and lay in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 240 SQMM 3.5 core Make : Cable Corporation of India/Finolex Cable Co/Polycab/GlosterHavells/KEI/ RR Kabel
Supply and lay in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 150 SQMM 3.5 core Make : Cable Corporation of India/Finolex Cable Co/Polycab/GlosterHavells/KEI/ RR Kabel
Supply and lay in replacement of LT underground cable ISI marked XLPE insulated heavy duty electric cable armoured and PVC sheathed heavy duty 1100 volts grade with aluminium conductor multistranded including cable connecting lugs, glands, jointing materials etc., laid in trenches, floors, ducts and fixing with fixing material on pole, wall complete of 50 SQMM 3.5 core Make : Cable Corporation of India/Finolex Cable Co/Polycab/GlosterHavells/KEI/ RR Kabel
Supply and Replacement of battry terminal for DG Sets complete all as specified and directed by Engr-in-Charge.
Supply and fixing battery cable assy. with copper conductor multistranded RED and BLACK colour 2mtr long 21sqmm for connection to self starter unit to Battery unit complete.
M & L for Calibration of FIP including supply & fixing in replacement plunger, DV, governor wet O-Ring, Pin roll, barrel, Pin ball bearing spring, washer and testing for following capacity of DG Set complete all as specified and directed by engr in Charge.
400/380 KVA DG Set
320 KVA DG Set
160 KVA DG Set
125 KVA DG set
63 KVA DG set
25 KVA DG set
Supply and topping up of best quality antifreezing ,inhabitor (Coolant) liquid for DG Set of various capacity and locations complete all as specified and directed.
M&L for Prepration of Old Surface of DG Sets, preparing the surface by rubbing with fine emery paper and making the surface smooth and re-painting with two coats of super quality synthetic enamel paint by spray gun fully matched with its original colour and making good entire DG Set ( Engine, Alternator, foundation ,Diesel Tank and Radiator unit with canopy) and including marking SM/MES No on DG Sets with diffrent paint maintaning colour code to the following capacity of DG Sets complete all as specified and directed by Engr in Charge .
400/380 KVA DG Set
160 KVA DG Set
125 KVA DG Set
100 KVA DG Set
63 KVA DG set
M & L for replacement of exhaust silencer of following capacity of DG set Make Kirlosker/Cummins/Greaves complete all as specified and directed by Engr-in-Charge
400/380 KVA DG Set
320 KVA DG Set
160 KVA DG Set
100/125 KVA DG set
Supply and replacement of ON Load Change over ( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 63 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make : L&T/ABB/Schneider/Legrand
Supply and replacement of ON Load Change over ( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 100 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make : L&T/ABB/Schneider/Legrand
Supply and replacement of OFF Load Change over ( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 200 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make : L&T/ABB/Schneider/Legrand
Supply and replacement of OFF Load Change over ( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 320 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make : L&T/ABB/Schneider/Legrand
Supply and replacement of OFF Load Change over ( Side Handle) switch 415 Volt in sheet metal inclosure 4 Pole of capacity 400 Amps with connecting acessories complete all as specified and directed by Engr in Charge. Make : L&T/ABB/Schneider/Legrand
Note :- Makes of spare parts to be replaced under this work and mentioend in relevant items in this BOQ here-in-before shall be of approved make and as per the manufacturer's recommendation of DG sets.
M/S BETONG CONSTRUCTION CO
Hitech Erectors Pvt. Ltd.
SUMEET TRADING CORPORATION
Horizon Construction Company
KONCHOK TSEWANG
Feroz Engineering Works
M/S AMCO INDUSTRIES AND EXPORT CORPORATION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .