Loading…
Loading…
Tender ID
Tender Value
₹1.3 Cr
EMD Value
₹2.6 L
Closing Date
19 Mar 2026, 5:00 pmClosed
Registrar
Baba Farid university of health sciences Faridkot
etender for SITC of 04 lifts for four super specility block in GGSMCH Faridkot
2025_DMER_155437_3
BFUHS/177/2025
Open Tender
Civil Works
Percentage
faridkot
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
₹2.6 L
3 Mar 2026
3 Mar 2026
20 Mar 2026
3 Mar 2026
19 Mar 2026
3 Mar 2026
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- Overall size 35sq.mm (3½ Core) Un armoured (On-Surface) CSR 34.10C XXIII (170 +25% = Rs.212.50 +5.35% = Rs.223.86)
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge Overall size 1.5sq.mm (Un-sheathed) CSR 34.09 II ( 18 +30% = Rs.23.40 + 5.35% = Rs.24.65)
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge Overall size 4sq.mm (Un-sheathed) CSR 34.09 IV ( 39 + 30% = Rs.50.70 +5.35% = Rs.53.41)
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge Overall size 10sq.mm (Un-sheathed) CSR 34.09 VI ( 88 + 30% = Rs.114.40 +5.35% = Rs.120.52)
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & olts (with 4Nos. 32mm long, 8 mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 19.50 metre (63.96 feet) below round level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 23metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 18metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation Earthing with 25mm x 3mm Copper Tape (upto 23Metre in Length) CSR 33.14 IV b (19518 + 40% = Rs.27325.20 + 5.3.5% =Rs.28787.09)
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-Additional Length 25mm x 3mm thick Copper Tape CSR 34.14 V (b) (432 + 40% = Rs.604.80 + 5.35% =Rs.637.15
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) CSR 34.16 II (134 +35% = Rs.180.90 + 5.35% = Rs.190.57)
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugsMCB Four Pole 50, 63amp. (10kA, Curve-C) CSR 34.16 XVI (1231 +35% = Rs.1661.85 + 5.35% = Rs.1750.75)
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board TP&N Horizontal Double Door Distribution Board 4 way each CSR 34.17 V (2406 +15% = Rs.2766.90 + 5.35 % = Rs.2914.92 )
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting 34.23 C II ( 4493 + 40% = Rs.6290.20 + 5.35 % = Rs.6626.72)
Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x200mm) 34.23 D a (2266 + 40% = Rs.3172.40 + 5.35 % = Rs.3342.12
SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring light point CSR 34.07 B ii (509 +25% = Rs.636.25 + 5.35% = Rs.670.28)
SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring 16/20Amp. power plug control point CSR 34.07B (vi) (315 +25% = Rs.393.75 + 5.35 % = Rs.414.81)
Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten of Make Jaquar Item Code LGLZ01x020XC or Its equilant Make and Cat. of Philips / Crompton including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer in-charge at site. (BFUHS/UWD/2019/10622 Dt 27/5/2019)
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- Overall size 35sq.mm (3½ Core) Un armoured (On-Surface) CSR 34.10C XXIII (170 +25% = Rs.212.50 +5.35% = Rs.223.86)
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge Overall size 1.5sq.mm (Un-sheathed) CSR 34.09 II ( 18 +30% = Rs.23.40 + 5.35% = Rs.24.65)
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge Overall size 4sq.mm (Un-sheathed) CSR 34.09 IV ( 39 + 30% = Rs.50.70 +5.35% = Rs.53.41)
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge Overall size 10sq.mm (Un-sheathed) CSR 34.09 VI ( 88 + 30% = Rs.114.40 +5.35% = Rs.120.52)
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & olts (with 4Nos. 32mm long, 8 mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 19.50 metre (63.96 feet) below round level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 23metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 18metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation Earthing with 25mm x 3mm Copper Tape (upto 23Metre in Length) CSR 33.14 IV b (19518 + 40% = Rs.27325.20 + 5.3.5% =Rs.28787.09)
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-Additional Length 25mm x 3mm thick Copper Tape CSR 34.14 V (b) (432 + 40% = Rs.604.80 + 5.35% =Rs.637.15
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) CSR 34.16 II (134 +35% = Rs.180.90 + 5.35% = Rs.190.57)
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugsMCB Four Pole 50, 63amp. (10kA, Curve-C) CSR 34.16 XVI (1231 +35% = Rs.1661.85 + 5.35% = Rs.1750.75)
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board TP&N Horizontal Double Door Distribution Board 4 way each CSR 34.17 V (2406 +15% = Rs.2766.90 + 5.35 % = Rs.2914.92 )
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting 34.23 C II ( 4493 + 40% = Rs.6290.20 + 5.35 % = Rs.6626.72)
Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x200mm) 34.23 D a (2266 + 40% = Rs.3172.40 + 5.35 % = Rs.3342.12
SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring light point CSR 34.07 B ii (509 +25% = Rs.636.25 + 5.35% = Rs.670.28)
SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring 16/20Amp. power plug control point CSR 34.07B (vi) (315 +25% = Rs.393.75 + 5.35 % = Rs.414.81)
Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten of Make Jaquar Item Code LGLZ01x020XC or Its equilant Make and Cat. of Philips / Crompton including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer in-charge at site. (BFUHS/UWD/2019/10622 Dt 27/5/2019)
Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- Overall size 35sq.mm (3½ Core) Un armoured (On-Surface) CSR 34.10C XXIII (170 +25% = Rs.212.50 +5.35% = Rs.223.86)
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge Overall size 1.5sq.mm (Un-sheathed) CSR 34.09 II ( 18 +30% = Rs.23.40 + 5.35% = Rs.24.65)
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge Overall size 4sq.mm (Un-sheathed) CSR 34.09 IV ( 39 + 30% = Rs.50.70 +5.35% = Rs.53.41)
Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge Overall size 10sq.mm (Un-sheathed) CSR 34.09 VI ( 88 + 30% = Rs.114.40 +5.35% = Rs.120.52)
Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & olts (with 4Nos. 32mm long, 8 mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 19.50 metre (63.96 feet) below round level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 23metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 18metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation Earthing with 25mm x 3mm Copper Tape (upto 23Metre in Length) CSR 33.14 IV b (19518 + 40% = Rs.27325.20 + 5.3.5% =Rs.28787.09)
Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:-Additional Length 25mm x 3mm thick Copper Tape CSR 34.14 V (b) (432 + 40% = Rs.604.80 + 5.35% =Rs.637.15
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Single Pole 6-32amp. (10kA, Curve-C) CSR 34.16 II (134 +35% = Rs.180.90 + 5.35% = Rs.190.57)
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugsMCB Four Pole 50, 63amp. (10kA, Curve-C) CSR 34.16 XVI (1231 +35% = Rs.1661.85 + 5.35% = Rs.1750.75)
Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board TP&N Horizontal Double Door Distribution Board 4 way each CSR 34.17 V (2406 +15% = Rs.2766.90 + 5.35 % = Rs.2914.92 )
Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting 34.23 C II ( 4493 + 40% = Rs.6290.20 + 5.35 % = Rs.6626.72)
Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x200mm) 34.23 D a (2266 + 40% = Rs.3172.40 + 5.35 % = Rs.3342.12
SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring light point CSR 34.07 B ii (509 +25% = Rs.636.25 + 5.35% = Rs.670.28)
SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring 16/20Amp. power plug control point CSR 34.07B (vi) (315 +25% = Rs.393.75 + 5.35 % = Rs.414.81)
Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten of Make Jaquar Item Code LGLZ01x020XC or Its equilant Make and Cat. of Philips / Crompton including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer in-charge at site. (BFUHS/UWD/2019/10622 Dt 27/5/2019)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
DNITofourLiftsinSuperSepciality.pdf
Tender Documents • 0.80 MB
BOQ_329444.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .