REPAIR/ MAINT OF EXTERNAL WATER SUPPLY SYSTEM WEST THE MALL ROAD UNDER GE (WEST) JALANDHAR CANTT

Amount

Excavation in trenches not exceeding 1.5 m deep and 1.5 m wide and getting out in soft/loose soil for laying pipe any size complete all as specified and directed.

Cutting of road / hard standing foot path not exceeding 0.30cm wide and 0.6 mtr depth for laying of pipe line including making good with PCC 1:3:6 type C-2 complete all as specified and directed.

Returning, filling in, including spreading leveling watering and well ramming in layers not exc 25 cm in soft soil complete all as specified and directed.

Removing excavated material not exc 50 m above and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed.

Making/boring hole under road/pavement/hard standing with help of bookies suitable for passing pipe (any type) upto 80 mm bore not less than one mtr below ground level including required earth work complete all as specified and directed. Note : GI tubing are measured and paid separetly.

Material and labour for run lead joint with lead including provision of spun yarn for spigot and socketed CI pipes/fittings of size 250 mm bore in repairs complete all as specified and directed.

Material and labour for run lead joint with lead including provision of spun yarn for spigot and socketed CI pipes/fittings of size 200 mm bore in repairs complete all as specified and directed.

Material and labour for run lead joint with lead including provision of spun yarn for spigot and socketed CI pipes/fittings of size 150 mm bore in repairs complete all as specified and directed.

Material and labour for run lead joint with lead including provision of spun yarn for spigot and socketed CI pipes/fittings of size 100 mm bore in repairs complete all as specified and directed.

Material and labour for run lead joint with lead including provision of spun yarn for spigot and socketed CI pipes/fittings of size 80 mm bore in repairs complete all as specified and directed.

Material and labour for flanged joints with 3 mm thick rubber/fibre board gasket complete flanged ends of DI pipe/ CI pipes/ MS pipes of size 200 mm bore complete all as specified and directed. Note : Additional nuts/ bolts/ washers as required to complete the work deemed to be included in the cost.

Material and labour for flanged joints with 3 mm thick rubber/fibre board gasket complete flanged ends of DI pipe/ CI pipes/ MS pipes of size 150 mm bore complete all as specified and directed. Note : Additional nuts/ bolts/ washers as required to complete the work deemed to be included in the cost.

Material and labour for flanged joints with 3 mm thick rubber/fibre board gasket complete flanged ends of DI pipe/ CI pipes/ MS pipes of size 100 mm bore complete all as specified and directed. Note : Additional nuts/ bolts/ washers as required to complete the work deemed to be included in the cost.

S&F in replacement overload relay with relay range 37.6 to 60 Amps, suitable for 50 HP/37 KW starter with suitable size PVC wires and connecting complete all as specified and directed

S&F in replacement overload relay with relay range 13.2 to 20 Amps, suitable for 15 HP/11 KW submersible motor starter with suitable size PVC wires and connecting complete all as specified and directed

Supply and fixing electronic positive displacement diaphragm type motor pump operating at 230V, 50 Hz, AC supply, discharge capacity 0-40 LPH, Max injecting pressure 5.5 Kgs/ Sq Cm with connected accessories like NRV, in-built ARV, foot valve with stainer fitted on pump suction assembly with fixing accessories, one tank level switch fitted on pump suction assembly to stop the pump when liquid in tank falls below a certain level and lights a red LED on the pump, adjustable stroke length and frequency complete all as specified and directed "Make approved by E-in-C".

Material and labour for cleaning of vegetation near OHT, UG sumps, DG sets, bore wells inside fencing of Pump house area by surface dressing upto 10cm in depth including removing of grass, small plants of any description and other unwanted materials and levelling complete all as specified and directed.

S&F 30 watt energy effecient LED street light fitting complete with high power LEDs as light source, prewired, mounted with new GI bracket made to shape, fixed with suitable size 2 Nos of clamps, nuts/bolts/washers etc and connecting including taking down unserviceable HPSV/MH/FTL light fitting of any rating all as specified and directed

M&L for opening of wash out sluice valve located upto height of 21 meter of over head tank of capacity any capacity & description to drain out water and closing the same after completion of work. (Note : Rate deemed to be included of all T&P required to execute the job)

Taking up or down steel tubing 15 mm bore including connections and removal from site complete all as specified and directed.

Taking up or down steel tubing 20 mm bore including connections and removal from site complete all as specified and directed.

Taking up or down steel tubing 25 mm bore including connections and removal from site complete all as specified and directed.

Taking up or down steel tubing 40 mm bore including connections and removal from site complete all as specified and directed.

Taking up or down steel tubing 50 mm bore including connections and removal from site complete all as specified and directed.

Supply and laying galvanised steel tubing medium grade 50 mm bore with all fittings such as tees, bends,elbows, reducer, union, nipples etc including all accessories such as couplers hooks,nuts saddles pipe hooks laid in trenches/under floor or fixed walls complete all as specified and directed.

Supply and laying galvanised steel tubing medium grade 40 mm bore with all fittings such as tees, bends,elbows, reducer, union, nipples etc including all accessories such as couplers hooks,nuts saddles pipe hooks laid in trenches/under floor or fixed walls complete all as specified and directed.

Supply and laying galvanised steel tubing medium grade 25 mm bore with all fittings such as tees, bends,elbows, reducer, union, nipples etc including all accessories such as couplers hooks,nuts saddles pipe hooks laid in trenches/under floor or fixed walls complete all as specified and directed.

Supply and laying galvanised steel tubing medium grade 20 mm bore with all fittings such as tees, bends,elbows, reducer, union, nipples etc including all accessories such as couplers hooks,nuts saddles pipe hooks laid in trenches/under floor or fixed walls complete all as specified and directed.

Supply and laying galvanised steel tubing medium grade 15 mm bore with all fittings such as tees, bends,elbows, reducer, union, nipples etc including all accessories such as couplers hooks,nuts saddles pipe hooks laid in trenches/under floor or fixed walls complete all as specified and directed.

Supply and fixing in repairs gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed of size 50 mm bore complete all as specified and directed.

Supply and fixing in repairs gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed of size 40 mm bore complete all as specified and directed.

Supply only calcium based high strength granular chlorination chemical for water treatment in 45 Kg plastic drum packing complete all as specified and directed Note; The contractor shall submit alongwith supply of material purchase vouchers test certificate for chemical composition and its expiry date etc and other relevant documents supply of chemical shall not be accepted without production of these documents and no payment released "Make approved by E-in-C".

Supply and fixing in repairs gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed of size 20 mm bore complete all as specified and directed.

Supply and fixing in repairs gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed of size 15 mm bore complete all as specified and directed.

Supply and fixing in repairs 25 mm bore Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fixing in repairs 20 mm bore Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fixing in repairs 15 mm bore Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fixing in repairs CPVC ball valve, 15 mm bore, heavy duty, with threaded male end and fixing complete all as specified and directed.

Supply and fixing in repairs CPVC ball valve, 20 mm bore, heavy duty, with threaded male end and fixing complete all as specified and directed.

Material and labour for preparation of steel surface and iron work of any description of valve pit cover and distribution mains etc and painting two coat of synthetic enamel paint of existing colour over a coat of red oxide complete all as specified and as directed.

Supply and fixing in replacement GI connection clamp set of two with 20 mm socket suitable for 150 mm bore pipe as per sample complete all as specified and as directed.

Supply and fixing in replacement GI connection clamp set of two with 20 mm socket suitable for 100 mm bore pipe as per sample complete all as specified and as directed.

Supply and fixing in replacement of mild steel split clamp, set of two suitable for 150 mm bore pipe made of 50x 6 mm flat iron as per sample complete all as specified and as directed.

Supply and fixing in replacement of mild steel split clamp, set of two suitable for 100/80 mm bore pipe made of 50x 6 mm flat iron as per sample complete all as specified and as directed.

Drilling and tapping cast iron water mains (in position) for branch connection of 20 mm dia where directed by Engineer-in-charge.

Drilling and tapping cast iron water mains (in position) for branch connection of 15 mm dia where directed by Engineer-in-charge.

Supply and laying 3 layer PP-R polypropylene copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold including all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ on surface of size 50 mm bore complete all as specified and directed.

Supply and laying 3 layer PP-R polypropylene copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold including all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ on surface of size 25 mm bore complete all as specified and directed.

Supply and laying 3 layer PP-R polypropylene copolymer concealed pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold including all PP-R plain & brass threaded polypropylene random fittings laid in trenches/ on surface of size 20 mm bore complete all as specified and directed.

Fixing only Cast Iron Sluice valve in position double flanged complete with Brass/GI Spindle iron wheel handle clock wise closing with drilled hole flanged heavy duty PN 1.0 of size 200 mm bore including provision of rubber gasket, nut,bolts,washers and taking down unserviceable sluice valve of size 200 mm bore complete all as specified and directed. Note : Item shall be issued to contractor free for fixing under Schedule 'B'.

Fixing only Cast Iron Sluice valve in position double flanged complete with Brass/GI Spindle iron wheel handle clock wise closing with drilled hole flanged heavy duty PN 1.0 of size 250 mm bore including provision of rubber gasket, nut,bolts,washers and taking down unserviceable sluice valve of size 250 mm bore complete all as specified and directed. Note : Item shall be issued to contractor free for fixing under Schedule 'B'.

Supply and fixing Cast iron Sluice valve in position double flanged complete with Brass Spindle iron wheel handle clock wise closing with drilled hole flanged heavy duty PN 1.0 of size 150 mm bore including provision of rubber gasket, nut,bolts,washers and taking down unserviceable sluice valve of size 150 mm bore complete all as specified and directed.

Supply and fixing Cast iron Sluice valve in position double flanged complete with Brass Spindle iron wheel handle clock wise closing with drilled hole flanged heavy duty PN 1.0 of size 100 mm bore including provision of rubber gasket, nut,bolts,washers and taking down unserviceable sluice valve of size 100 mm bore complete all as specified and directed.

Supply and fixing Cast iron Sluice valve in position double flanged complete with Brass Spindle iron wheel handle clock wise closing with drilled hole flanged heavy duty PN 1.0 of size 80 mm bore including provision of rubber gasket, nut,bolts,washers and taking down unserviceable sluice valve of size 80 mm bore complete all as specified and directed.

Fixing only cast iron non return valve, reflux with bypass arrangement and installed on 150 mm dia CI pipes including taking out old unserviceable NRV complete all as specified and dircted by Engineer-in-charge. Note : Item shall be issued to contractor free for fixing under Schedule 'B'.

Fixing only cast iron non return valve, reflux with bypass arrangement and installed on 100 mm dia CI pipes including taking out old unserviceable NRV complete all as specified and dircted by Engineer-in-charge. Note : Item shall be issued to contractor free for fixing under Schedule 'B'.

Supply and fixing Hard Rubber/Cork ball suitable for 80 mm bore Cast iron air release valve including taking down unserviceable rubber ball from Air release valve by unscrewing nuts/bolts/washers etc and refixing the same including provn of rubber gasket of suitable size complete all as specified and directed.

Supply and fixing Hard Rubber/Cork ball suitable for 100 mm bore Cast iron air release valve including taking down unserviceable rubber ball from Air release valve by unscrewing nuts/bolts/washers etc and refixing the same including provn of rubber gasket of suitable size complete all as specified and directed.

Supply and fixing in replacement of brass spindle for CI sluice valve threaded fixed in repair in sluice valve of size 200 mm bore complete all as specified and directed.

Supply and fixing in replacement of brass spindle for CI sluice valve threaded fixed in repair in sluice valve of size 150 mm bore complete all as specified and directed.

Supply and fixing in replacement of brass spindle for CI sluice valve threaded fixed in repair in sluice valve of size 100 mm bore complete all as specified and directed.

Supply and fixing in replacement of brass spindle for CI sluice valve threaded fixed in repair in sluice valve of size 80 mm bore complete all as specified and directed.

Supply and fixing of cast iron detachable joints suitable class with rubber rings nuts/ bolts/ washers complete of size 200 mm dia complete all as specified and directed.

Supply and fixing of cast iron detachable joints suitable class with rubber rings nuts/ bolts/ washers complete of size 150 mm dia complete all as specified and directed.

Supply and fixing of cast iron detachable joints suitable class with rubber rings nuts/ bolts/ washers complete of size 100 mm dia complete all as specified and directed.

Supply and fixing of cast iron detachable joints suitable class with rubber rings nuts/ bolts/ washers complete of size 80 mm dia complete all as specified and directed.

Attending complaints by deploying sufficient labour to repair leakage / blockage of underground water carrying pipes size 15 mm to 225 mm bore of any discription such as AC/CI/DI/GI at any locations including necessary excavation & earthwork pipe, line dewatering etc on daily basis complete all as specified. Note :- (i) Minimum 01 Team comprising 01 FGM (Semi Skilled) and 04 Helper (Unskilled) Each will be deployed by the contractor to attend the complaints on daily basis including Sunday and holidays, for the same attendance will be maintained. (ii) Online complaint received at complaint cell will be notified to contractor on complaint slip at any time between 0600 hrs to 2000 hrs and the same shall be immediately attended and defects rectified with in six hrs from notification of complaint to the contractor. (iii) Confirmation of attendence & rectification of complaint shall be given in writing by the contractor and same shall be recorded in the register maintained for the purpose. (iv) In case the contractor fails to attent complaints within stipulated time (i.e 6 Hrs) a penalty shall be imposed @ Rs 300 per complaint. For absent of labour Rs. 400/- per labour per day will be recoverd as penalty. (v) Rates quoted by the contractor shall be deemed included the cost of necessary Labour required and the cost of necessary T&P required (vi) In case materials are required shall be measured and paid separetley under respective item.

Supply and fixing in replacement Galvanised Iron fittings, ISI Marked of following description with provision of thread/teflon tape or white lead including taking down the old unserviceable GI fittings all as specified and directed. (a) Union 50 mm bore

(b) Union 40 mm bore

(c) Union 25 mm bore

(d) Union 20 mm bore

(e) Union 15 mm bore

Supply and fixing in replacement Galvanised Iron fittings of following description with provision of thread/teflon tape or white lead including taking down the old unserviceable GI fittings all as specified and directed. (a) Nipple 25mm bore length 80mm

(b) Nipple 25mm bore length 100mm

(c) Nipple 25mm bore length 150mm

(d) Nipple 20mm bore length 80mm

(e) Nipple 20mm bore length 100mm

(f) Nipple 20mm bore length 150mm

(g) Nipple 15 mm bore length 80mm

(h) Nipple 15mm bore length 100mm

(h) Nipple 15mm bore length 150mm

Supply and fixing in replacement Galvanised Iron fittings of following description with provision of thread/teflon tape or white lead including taking down the old unserviceable GI fittings all as specified and directed. (a) Tee 25mm x 25mm

(b) Tee 25mm x 20mm

(c) Tee 20mm x 20mm

(d) Tee 20mm x 15mm

(e) Tee 15mm x 15mm

Supply and fixing in replacement Galvanised Iron fittings of following description with provision of thread/teflon tape or white lead including taking down the old unserviceable GI fittings all as specified and directed. (a) Socket 50mm

(b) Socket 40mm

(c) Socket 25mm

(d) Socket 20mm

(e) Socket 15mm

Supply and fixing in replacement Galvanised Iron fittings of following description with provision of thread/teflon tape or white lead including taking down the old unserviceable GI fittings all as specified and directed. (a) Elbow 25mm x 25 mm

(b) Elbow 40mm x 40 mm

(c) Elbow 20mm x 20 mm

(d) Elbow 15mm x 15 mm

Supply and fixing in replacement Galvanised Iron fittings of following description with provision of thread/teflon tape or white lead including taking down the old unserviceable GI fittings all as specified and directed. (a) Plug 25 mm

(b) Plug 20 mm

(c) Plug 15 mm

Supply, laying, jointing and testing 150 mm bore, ductile iron pressure pipes with spigot and socket ends centrifugally cast conforming to IS-8329-2000 suitable for push on tyton joints including joints and jointing materials Class "K-7" in any length, laid in trenches complete all as specified and as directed.

Supply, laying, jointing and testing 100 mm bore, ductile iron pressure pipes with spigot and socket ends centrifugally cast conforming to IS-8329-2000 suitable for push on tyton joints including joints and jointing materials Class "K-7" in any length, laid in trenches complete all as specified and as directed.

Material and labour for sand cushioning in trenches 8 cm below the cables and 15cm above the cable complete all as specified and directed.

Supply and laying old size brick, burnt clay building brick sub class (B) for protecting LT under goround cable complete all as specified and directed.

Supply and laying in replacement jointing, testing and commissioning the XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 Volts grade, cross sectional area Size 95 Sq mm, 3.5 Core including connecting the same with existing panels with required cable glands , thimbles/ lugs as required at site complete all as specified and directed.

Supply and laying 80 mm bore GI tube light grade in trenches and passing through the culvert/road complete all as specified and directed.

Supply and fixing PVC insulated Aluminium conductor cable of weather proof twin core 4 sqmm for connecting various type of street light fittings complete all as specified and directed.

Supply and fixing in replacement Fully automatic Submersible star delta starter enclosed in Sheet metal with relay range 37.6 to 60 Amps, suitable for 50 HP/37 KW submersible motor, Contactor rating 70 Amps & with Pneumatic timer and with auto switch, short circuit protection all as specified and directed. Make : BCH Cat Part No CPSDPYCT2M or equivalent in Schneider/ABB

Supply and fixing in replacement Fully automatic Submersible star delta starter enclosed in Sheet metal with relay range 13.2 to 20 Amps, suitable for 15 HP/11 KW submersible motor, Contactor rating 25 Amps & with Pneumatic timer and with suto switch, short circuit protection all as specified and directed. Make : BCH Cat Part No CPSDPYLN or equivalent in Schneider/ABB

Supply and fixing in replacement PVC insulated Single core, 16 sqmm, copper condutor, stranded cable suitable for inter connection of electric network inside panel with required No of Screws, nuts, bolts & washers etc all as specified and directed. Note : Lugs/thimbles will be measured and paid separately under relevant items.

Material and labour for earthing complete with galvanised steel earth plate, electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below normal ground level) with top edge of the plate not less than 1.5metres below normal ground level, connected and including GI earth lead wire 4mm dia connected to earth plate by means of nuts, bolts, check nuts and washers of galvanised iron or steel, GI earth wire protected by 15mm dia GI pipe 'light grade' upto 2 metre above ground level and connected to machinery earth plate surrounded by packed alternate layers of charcoal and common salt 15cm thick all around top and bottom and watering pipe 20mm bore GI light grade all as shown in electrical plate No 3 of SSR Part-I of 2009, testing on completion including providing PCC chamber (1:3:6) using 20mm graded stone aggregate and 50mm thick cover with RCC 1:2:4 type B-1 and 8mm dia TMT bars 100mm C/C both way and frame including excavation earthwork and returning filling etc, complete all as specified and directed. Note :- Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit.

Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm FRLS PVC insulated unsheathed single core multistranded copper conductor cable for working voltage 1100 volts grade, drawn into and including PVC conduit concealed in wall (except on column and roof where the same must be fixed on surface) with accessories, ceilings and including pressed steel terminal box made out of 1.6mm thick MS sheet fixed flush with wall required size hylum laminated sheet cover of 3mm thick fixed with metal screw for housing the switches, sockets out let etc including 1.5 sqmm FRLS PVC insulated copper conductor cable earth continuity conductor and connecting to the common earth dolly all as specified and directed for the following:- (a) One light point controlled by one way switch.

All as per item No.108 above but one fan point controlled by one way switch complete all as specified and directed.

All as per item No.108 above but socket outlet 5 Amps on same board with other switches complete all as specified and directed.

All as per item No.108 above but 3 pin socket out let 5 Amps on the independent board complete all as specified and directed.

Supply and fixing switch piano type 5 Amps single pole one way complete all as specified and directed.

Material and labour ceiling rose, surface backlite 65 x 50mm three/two terminals complete all as specified and directed.

Supply and fixing socket outlet type 2 in 1 3/5 pin 5 Amps complete all as specified and directed.

Supply and fixing stepped type electronic fan regulator and connecting up complete 230 / 250 volts complete all as specified and directed.

Supply and fixing LED batten type fitting, 22 watt, 4 feet length with aluminium housing, 230 vlts, AC, 50 Hz, Colour temp 6500 Kelvin connection with all accessories complete all as specified and directed.

Supply and fixing LED tube rod 22 Watt in existing tube light fittings including making necessary connections as required for LED tube complete all as specified and directed.

Supply and fixing MCB SPN, 32 Amps, 230 volts 50 HZ complete all as specified and directed.

Supply and fixing MCB SP, 6 to 32 Amps , 230 volts 50 HZ complete all as specified and directed.

Supply and fixing in replacement MCCB 3 pole, 125 amps rating, 415 volts, 16 KA breaking capacity fixed type in the existing panel / location and connection with using aluminum lugs complete all as specified and directed.

Supply and fixing in replacement MCCB 3 pole, 200 amps rating, 415 volts, 36 KA breaking capacity adjustabe type in the existing panel / location and connection with using aluminum lugs complete all as specified and directed.

Supply and fixing in replacement Contactors AC Control, 3 pole (1No + 1 NC), 50 Amps/25 KW, 415 Volts, coil volt 220VAC fixing and connecting all as specified and directed.

Supply and fixing in replacement Contactors AC Control, 3 pole (1No + 1 NC), 70 Amps/37 KW, 415 Volts, coil volt 220VAC fixing and connecting all as specified and directed.

Supply and fixing in replacement Electronic timer suitable for star delta starter, supply volt 240-415 VAC, 50/60 Hz, timer adjustable type (3s to 120s) fixing and connecting complete all as specified and directed.

Supply and fixing in replacement single phase preventor with auto/manual switch, coil volt 415V suitable for star delta starter, fixing, testing incl provision of suitable size PVC wires and connecting complete all as specified and directed.

Supply and fix Volt Meter digital type suitable to accommodate in Panels and connection all as specified and directed.

Supply and fix Ampere meter digital type suitable to accommodate in Panels and connection all as specified and directed.

Supply and fixing in replacement copper lugs/thimble suitable for connecting 16 sqmm single core copper cable all as specified and directed.

Supply and fixing in replacement porcelain two way connector 3 module suitable for connecting 16 sqmm single core copper cable all as specified and directed.

Supply and fixing in replacement LED indicator lamp coloured (Red, Yellow,Blue) suitable to mount in panel with mounting clips/nuts etc all as specified and directed.

Material and labour in replacement repair/re-wiring of starters upto 50 HP with single core copper wires of suitable size with thimbles screws, nuts/bolts, washers etc for interconnecting the contactos, timers, single phase preverters etc all as specified and directed. Note : Contactors/timers/single phase preventors as required will be measured and paid separately under relevant items.

J.K & Company

M/s Bansi Lal

CHOUDHARY AND SONS