Term contract for improvement, repair, construction of footpath or walking plaza, jogging tracks in Delhi Cantonment

Amount

M/L Brick work with class designation 100 built in cement mortar 1:4 ( 1 cement : 4 coarse sand) complete for path, pavements, dwarf walls all as directed by the Engineer-in- Charge.

Supplying and stacking of good earth at site including royalty and carriage complete (earth measured in stacks will be reduced by 20% for payment) for filling and general horticulture purposes.

Earth filling and spreading by mixing water so as to have earth mixed with optimum quantity of water to achieve 95% compaction using plate vibrator machine complete all as directed by Engineer-in-charge.

M/L, TMT bars 8 mm dia and over cut to length and bent to shape required including cranking bending spirally for hoping for columns, hooking ends and binding, with and including mild steel wire (annealed) not less then 0.9mm dia or securing with clips quality confirming to Fe – 410 S or Fe-410-O.

Providing & laying in position Ready Mix Cement concrete M-10, grade, machine batched, machine mixed, Design Mix Concrete (excluding the cost of centering and shuttering,) placing in position, mechanical vibrated and finished including addition of admixtures in recommended portions (as per IS-9103) to accelerate/retard setting of concrete to improve workability without tampering strength and durability laid to required slope and camber in panels as directed in accordance with IS 456-2000,transported to the site of work from approved RMC plant . APPROVED MAKES : ND Con, Alcon, Techno, Spectrum, Orbit build tech, SS RMC, Raj Ready concrete, Metro, Shri Ram Cement concrete, L&T, Birla, Unitec, RDC, ACC, JK, Shaila, Empee con or having plant of minimum capacity of 60 cumt/and turn over should be minimum Rs. One crore per month or 4000 cum/month from the last one year upto proceeding month of opening tender. Contractor to submit procurement vouchers along with the bill.

Providing & laying in position Ready Mix Cement concrete M-25, grade, machine batched, machine mixed, Design Mix Concrete (excluding the cost of centering and shuttering,) placing in position, mechanical vibrated and finished including addition of admixtures in recommended portions (as per IS-9103) to accelerate/retard setting of concrete to improve workability without tampering strength and durability laid to required slope and camber in panels as directed in accordance with IS 456-2000,transported to the site of work from approved RMC plant . Approved makes ND Con, Alcon, Techno, Spectrum, Orbit build tech, SS RMC, Raj Ready concrete, Metro, Shri Ram Cement concrete, L&T, Birla, Unitec, RDC, ACC, JK, Shaila, Empee con or having plant of minimum capacity of 60 cumt/and turn over should be minimum Rs. One crore per month or 4000 cum/month from the last one year upto proceeding month of opening tender. Purchase bills to be submitted for claiming of payment by the contractor.

Providing & laying in position Ready Mix Cement concrete M-35, grade, machine batched, machine mixed, Design Mix Concrete (excluding the cost of centering and shuttering,) placing in position, mechanical vibrated and finished including addition of admixtures in recommended portions (as per IS-9103) to accelerate/retard setting of concrete to improve workability without tampering strength and durability laid to required slope and camber in panels as directed in accordance with IS 456-2000,transported to the site of work from approved RMC plant . Approved makes ND Con, Alcon, Techno, Spectrum, Orbit build tech, SS RMC, Raj Ready concrete, Metro, Shri Ram Cement concrete, L&T, Birla, Unitec, RDC, ACC, JK, Shaila, Empee con or having plant of minimum capacity of 60 cumt/and turn over should be minimum Rs. One crore per month or 4000 cum/month from the last one year upto proceeding month of opening tender. Purchase bills to be submitted for claiming of payment by the contractor.

Providing and fixing at or near the ground level, Factory made Pre cast Cement Concrete Kerb stone of Design Mix M-25 grade, size of kerb stone 200mm length, 200mm height, bottom width 130 mm and Top width 80mm as directed by Engineer-in-charge. Kerb stone should be manufactured in joint less moulds on vibration compaction table and finished smooth as per required shape size and pattern and setting in position, in cement mortar 1:4 ( 1 cement 4 coarse sand ) jointing and pointing with cement mortar 1:2 (1 cement :2 fine sand ) including making drainage opening where ever required complete as per direction of Engineer-in-Charge. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

Providing and fixing at or near the ground level, Factory made Pre cast Cement Concrete Kerb stone of Design Mix M-25 grade, size of kerb stone 900mm or 600 mm length, 300mm height, bottom width 125 mm and Top width 80mm as per typical design as directed by Engineer-in-charge. Kerb stone should be manufactured in joint less moulds on vibration compaction table and finished smooth as per required shape size and pattern and setting in position, in cement mortar 1:4 ( 1 cement 4 coarse sand ) jointing and pointing with cement mortar 1:2 (1 cement :2 fine sand ) including making drainage opening where ever required complete as per direction of Engineer-in-Charge. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

Providing and fixing kerb stones of any size, shape and pattern as approved by Engineer-in-Charge, made out of C&D waste, at C&D waste recycling plant established by East Delhi Municipal Corporation or other similar agencies and Municipal bodiesas approved by the Engineer-in-Charge, purchased by the contractor at applicable rate fixed by such units. Kerb stones fixed and provided at site in the indicated locations in cement mortar 1:4 (1 Cement: 4 coarse sand) joining and pointing with cement mortar (1 cement : 2 fine sand) complete all as specified / directed by the Engineer-in-Charge.

Material & labour for fixing of old, dismantalled kerb stones of any size, shape and pattern in the position as directed by Engineer-in-charge including setting in position with cement mortar 1:4 ( 1 cement 4 coarse sand ) jointing and pointing with cement mortar 1:2 (1 cement :2 fine sand ) including marking drainage opening where ever required complete etc as per direction of Engineer-in-Charge.

Providing & fixing, full body Vetrified Tiles (unrectified), Earthern range Unglazed tiles of colour and texture as directed by Engineer-in-Charge. Size - 200 mm x 200 mm and 12 mm thick or 100 mm x 100 mm and 10 mm thick laid with 6 mm plastic spacers for uniform joints, including filling of joints with with approved colour grout of weber and/ or balendura, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) laid in pattern and designs as specified by Engineer -in-Charge. The tiles shall have following specifications:- i) Deviation length/ width : ±0.75% ii) Thickness : ±10.0% iii) Straightness of sides : ±0.60%/±0.75% iv) Rectangularity : ±0.50%/± 1.00% v) Surface Flatness – Curvature & Warpage : ±0.75%/±1.00% vi) Surface Quality : Min 95% of the tiles shall be free from visible defects vii) Water Absorption : as per IS-13630:2/ISO-10545:3 viii) Module of Rupture-N/mm2 : Avg.35, Individual 32, Min ix) Breaking Strength-In N : > 1300 N x) Scratch Hardness of Surface – Mohs : 5 Min Approved Makes : Pavit, Johnson or Equivalent

Providing & fixing, full body Vetrified Tectile Tiles (unrectified, Yellow in colour), Earthern range Unglazed tiles of colour and texture as directed by Engineer-in-Charge. Size of Yellow Tectile shall be 300 mm x 300 mm and 15 mm thick or 100 mm x 100 mm and 10 mm thick laid with 6 mm plastic spacers for uniform joints, including filling of joints with with approved colour grout of weber and/ or balendura, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) laid in pattern and designs as specified by Engineer -in-Charge. The tiles shall have following specifications:- i) Deviation length/ width : ±0.75% ii) Thickness : ±10.0% iii) Straightness of sides : ±0.60%/±0.75% iv) Rectangularity : ±0.50%/± 1.00% v) Surface Flatness – Curvature & Warpage : ±0.75%/±1.00% vi) Surface Quality : Min 95% of the tiles shall be free from visible defects vii) Water Absorption : as per IS-13630:2/ISO-10545:3 viii) Module of Rupture-N/mm2 : Avg.35, Individual 32, Min ix) Breaking Strength-In N : > 1300 N x) Scratch Hardness of Surface – Mohs : 5 Min Approved Makes : Pavit, Johnson or Equivalent

Providing and fixing 60mm thick interlocking paver blocks of approved shape / pattern as directed by the Engineer-in-Charge, 60 mm thick, made out of C&D waste at C&D waste recycling plant established by East Delhi Municipal Corporation or other similar agencies/ Municipal Corporations as approved by the Engineer-in-Charge. Interlocking paver blocks shall be purchased by the contractor as applicable rates fixed by such units. Interlocking paver blocks be fixed and provided at site at indicated locations in a pattern approved / directed by Engineer-in-Charge, laid over a base of 30 mm (average) thick Jamuna sand and joints filled with fine sand and finally compaction of bedding sand and blocks laid over it, with vibratory plate compactors, till the top of each paving block is in level with its adjacent blocks complete as per directions of Engineer-in-Charge.

Providing and fixing in floors/ pavements and the like with Factory made 60 mm thick cement concrete Prefab Interlocking Coloured Paver Blocks of any Colour, shape and pattern (Malino, Square, Basil, I-Section or any other pattern as approved by Engineer-in-Charge) having Compressing strength of 300 Kg/Cm2 with grey cement and pigment manufactured in joint less moulds on vibration table, of size shape and pattern as approved by Engineer-in-Charge, laid over a base of 30 mm (average) thick Jamuna sand and joints filled with fine sand and finally compaction of bedding sand and blocks laid over it, with vibratory plate compactors, till the top of each paving block is in level with its adjacent blocks laid in designs and patterns complete as per directions of Engineer-in-Charge. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Unistone Products (I) Pvt. Ltd., Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

Material/ labour, extra charges for providing factory made 80 mm thick cement concrete prefab interlocking coloured paver blocks of any colour, shape and pattern (Malino, square, .Basil, I- Section or any other pattern as approved by Engineer-in-charge, in lieu of 60 mm thick interlocking paver blocks, having average comprehensive strengthen of 350 kg/cm2 with grey cement and pigment manufactured in jointless moulds on vibration table, laid over a base of 30 mm thick (average) Jamuna Sand and joints filled with fine sand and finally compaction of bedding sand and laid over it with vibratory plate compactors till the top of each paving blocks is in level will adjacent blocks laid in designs and patterns complete as per directions of Engineer-in-Charge. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Unistone Products (I) Pvt. Ltd., Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

Material/ labour, extra charges for providing factory made 100 mm thick cement concrete prefab interlocking coloured paver blocks of any colour, shape and pattern (Malino, square, .Basil, I- Section or any other pattern as approved by Engineer-in-charge, in lieu of 60 mm thick interlocking paver blocks, having average comprehensive strengthen of 4000 kg/cm2 with grey cement and pigment manufactured in jointless moulds on vibration table, laid over a base of 30 mm thick (average) Jamuna Sand and joints filled with fine sand and finally compaction of bedding sand and laid over it with vibratory plate compactors till the top of each paving blocks is in level will adjacent blocks laid in designs and patterns complete as per directions of Engineer-in-Charge. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Unistone Products (I) Pvt. Ltd., Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

Providing and laying GRC (Glass reinforced concrete) paver tiles 300mm x 300mm size of minimum thickness 22mm, coloured tiles of any colour , design as directed by Engineer-in-Charge. The tiles should be made with M-40 Grade Concrete Mix Design having ’53’ grade white Portland cement, reinforced with Alkali Resistant glass fibre and the pigmentation should be done with exterior grade synthetic inorganic iron oxide pigments manufactured by approved manufacturer with high vibration technology. The pigmentation should be homogeneous and in accordance with British standard BS EN 12878:1999. The other additives should be fine washed graded quartz, super plasticizers and integrated water proffers agents and others. The top surface of the tiles should be sealed with acrylic lacquer resulting in surface water absorption of tiles, less then 1% and water absorption by 24 hrs. immersion method, less that 8% and shall be laid over 20mm thick cement mortar bed 1:3 (1cement : 3 coarse sand) as directed by Engineer-in-Charge. Approved Makes : Nimco precast Pvt. Ltd., K.K, TeraFerma, Unistone Products (I) Pvt. Ltd., Kreative Concrete Company, UP Concrete products.

Providing and laying GRC Tectile Paver Tiles (Glass reinforced concrete) (Yellow Colour) 300mm x 300mm size of minimum thickness 22mm, coloured tiles of 'Yellow colour', as directed by Engineer-in-Charge. The tiles should be made with M-40 Grade Concrete Mix Design having ’53’ grade white Portland cement, reinforced with Alkali Resistant glass fibre and the pigmentation should be done with exterior grade synthetic inorganic iron oxide pigments manufactured by approved manufacturer with high vibration technology. The pigmentation should be homogeneous and in accordance with British standard BS EN 12878:1999. The other additives should be fine washed graded quartz, super plasticizers and integrated water proffers agents and others. The top surface of the tiles should be sealed with acrylic lacquer resulting in surface water absorption of tiles, less then 1% and water absorption by 24 hrs. immersion method, less that 8% and shall be laid over 20mm thick cement mortar bed 1:3 (1cement : 3 coarse sand) as directed by Engineer-in-Charge. Approved Makes : Nimco precast Pvt. Ltd., K.K, TeraFerma, Unistone Products (I) Pvt. Ltd., Kreative Concrete Company, UP Concrete products.

Labour for Fixing of old/ dismentaled interlocking tiles / pavers, precast factory made, 60mm thick of any colour, shape and pattern (Square, Malino, Basil, I section etc.) laid over a base of 30mm (avg) thick with fine sand and finally compaction of bedding sand and blocks with vibratory plate compactors, till the top of each paving block is in level with its adjacent blocks, laid in any design and pattern complete as per direction of Engineer-in-Charge.

Supplying of ISI marked Pre cast SFRC slab of any size, 70 mm thick using M-25 concrete and as per as per IS. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill. Note :- (i) contractor to submit tax paid vouchers of gully grating slab obtained from approved manufactures for claim of entire quantity of work incorporated. (ii) Contractor to submit manufacturer certificate for supply of gully grating slab of M-25 Strength for the designated site of work.

Supplying of ISI marked Pre cast SFRC slab of any size, 100 mm thick (heavy duty) using M-35 concrete and as per as per IS. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Unistone Products (I) Pvt. Ltd., Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill. Note :- (i) contractor to submit tax paid vouchers of gully grating slab obtained from approved manufactures for claim of entire quantity of work incorporated. (ii) Contractor to submit manufacturer certificate for supply of gully grating slab of M-25 Strength for the designated site of work.

Providing and fixing Precast Polymer Saucer drain of size and shape as indicated by Engineer-in-charge for surface drainage, fixed, laid over 20mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) and pointing with 1 : 2 cement mortar (1 cement : 2 find sand) laid to slopes complete as directed by Engineer-in-charge. Size of Precast drain 900 mm length , width 300 mm and thickness 100 mm, manufactured with Design Mix M-35 using Vibro technology complete. APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

Supplying of SFRC Manhole covers & frames conforming to IS – 12592 (Part I) using M-35 concrete having clear opening of 560 mm dia as per details below:

(a) Heavy Duty: . Over all Total Size in height mm mm Frame Details 875 155 Cover Details 720 80 APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

(b) Medium Duty: . Over all Total Size in height mm mm Frame Detials 770 110 Cover Details 670 60 APPROVED MAKES : Nimco precast Pvt. Ltd., K.K, TeraFerma, Kreative Concrete Company, UP Concrete products. Contractor to submit procurement vouchers along with the bill.

Transportation at site of work at anywhere in Delhi Cantt DTH Rig plant, equipment etc required for drilling in any earthen strata, and development and removal of the same from site on completion of job all as specified and directed by Engineer-in-Charge

Drilling of 200mm (8”) dia bore hole by, DTH Rotary Rig method upto 100 mt deep below the ground level including disposal of surplus soil to distance not exceeding 125 mtr. at Delhi Cantt all as specified and directed by Engineer-in-Charge.

Supplying and lowering and fixing of plain MS sloted black pipe 6”(150 mm ) nominal bore having(1.59 mm to 3 mm ) x 75 mm slot complete medium grade wall thickness 4.80 mm made of MS ERW sockets and socketed as per IS 1239 marked pipe in standard length complete with necessary fitting and jointing complete all as specified and directed by Engineer-in-Charge.

Providing and fixing, Vitrified (Rectified) tiles of size 300mmx300mmx10mm in pavements, footpaths and like of Ist quality in specified colour/shade and texture laid in Multi coloured, design and pattern as approved by Engineers-in-charge laid with 5mm grooves all around tile, laid over 20mm thick cement mortar 1:3(1cement : 3 coarse sand) and pointed with white cement mixed with colour/pigment to match the shade complete all as directed by Engineer-in-Chrage Approved Make:- Kajaria, Somany, Orient, Murudeshwar Ceremics, Johnson.

Supply & packing pea gravel of size 2.5mm around casing pipe all as specified and directed by Engineer-in Charge.

Supplying and filling of aggregate for loose filling of gauge exc. 63 mm and n. exc 100mm of broken stone/boulders.

Supplying and filling of coarse sand in Rain water harvesting recharge pits, complete all as specified/ directed by the Engineer-in-Charge.

Supply and fixing FRP gratings for existing Rain Water Spouts, on road side in footpaths, Medium duty, Mesh size 50 mm x 50 mm, fixed in position as directed by the Engineer-in-Charge.

Bidder Name

Amount

sn malhotra and sons(GSTN-07AABFS6724N1ZT)

AMIT ASSOCIATES(GSTN-07ACUPG0847K1Z7)

PUJA CONSTRUCTION COMPANY(GSTN-07AARFP6755C1ZW)

M/s. Kansal Construction Co.(GSTN-07AAQFK7850A1Z8)

AMIT ASSOCIATES

PUJA CONSTRUCTION COMPANY

sn malhotra and sons

M/s. Kansal Construction Co.

AMIT ASSOCIATES

sn malhotra and sons