PROVN OF OFFICE BLDG WITH ALLIED INFRASTRUCTURE AT LKG RR AND SPL REPAIR TO BLDG NO P-36 (JCOs LIVING) AT BDE CAMP, KG TOP

Supply and fix exhaust fan made of study Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and as directed.

Schedule 'A' Part-I (Building Work)

Construction of Office building with allied infrastructure work complete all as specified and as shown on drawings.

Schedule 'A' Part-II (Site Clearance Works)

Total amount of Sch 'A' Part-II (Site Clearance Works) brought forward from srl page No-22

Schedule 'A' Part-III (Protective Works)

Total amount of Sch 'A' Part-III (Protective Works) brought forward from srl page No-24

Schedule 'A' Part-IV (Path Works)

Total amount of Sch 'A' Part-IV (Path Works) brought forward from srl page No-25

Schedule 'A' Part-V (Sewage Disposal Works)

Total amount of Sch 'A' Part-V (Sewage Disposal Works) brought forward from srl page No-27

Schedule 'A' Part-VI (Area Drainage Works)

Total amount of Sch 'A' Part-VI (Area Drainage Works) brought forward from srl page No-28

Schedule 'A' Part-VII (Internal Electrification Works)

Total amount of Sch 'A' Part-VII (Internal Electrification Works) brought forward from srl page No-31

Schedule 'A' Part-VIII (External Water Supply Works)

Total amount of Sch 'A' Part-VIII (External Water Supply Works) brought forward from srl page No-32

Supply and fix in repair Submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor cable (FRLS), 1100 volts grade of size 6 Sqmm (nominal area) each and one single core 6 Sqmm (nominal area) as earth continuity conductor drawn into PVC conduit complete all as specified and directed. NOTE: (i) Rates for PVC casing capping with accessories are deemed to be included in the unit rate. (ii) Two run of 6 Sqmm and one run of 6 Sqmm copper cable shall be measured as one length.

Schedule 'A' Part-IX (Plumbing Work)

List of works pertains to office building with allied infrastructure.

All as per Item 13.71 above but in skirting over 10mm thick rendering in CM 1:4 complete all as specified and directed.

Schedule 'A' Part-X (Internal Water Supply)

Total amount of Sch 'A' Part-IX (Plumbing Works) brought forward from srl page No-33

Schedule 'A' Part-XI (Misc Items of Works Pertains to Office Bldg with Allied Infrastructure) Note : This schedule is not prepriced by MES and the pre-priced rate indicated as "Rs0.00" under Col.5 signifies this fact only.

Supply and fixing energy efficient LED building security light fitting 35 W, input voltage 110V to 280VAC, 50 Hz with ingress protection IP66, LM 80, standard luminaries with efficiency 100 lumen/watt with secondary optics, perfectly matched lenses, complying to IEC60598/IS10322, with auto shut down on high voltage, CRI>70,PF>0.95, with short circuit & reverse circuit protection against10kV high surges, minimum 25000 burning hours (life), operating temperature 1 to 50 degree C, rectangular shape with pressure die cast aluminium housing with weather proof gasket for lamp and driver compartment with system wattage of 45W=10%W, rated lumens, 120 degree view angle, constant current type driver having THD<10%, including all fixing arrangement like clamps, nuts, bolts, washers, 35W LED rod lamp (having PF>0.9, input voltage 90-300V, IP-66, LM80) with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc. complete all as specified and as directed.

Supply and fix GI bracket of 40 mm bore light grade pipe 1.2 m length bend to shape as required including 02 Nos of MS flat iron clamp, nut&bolt etc. complete all as specified and directed by EIC

Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220V AC recessed/ Surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting upp with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Note : Recessed & surface mounted lights shall be provided as per site requirement.

Lan/CCTV information socket- category 6-UTP -1 module complete all as specified and directed.

TV socket 1 module complete all as specified and directed.

Supply and drawing pair of 0.5 sqmm FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/PVC conduit as required complete all as specified and directed.

Supply and drawing co-axial TV cable RG-6 grade, 0.7 mm. Solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheathed in the surface /recessed steel/ PVC conduit as required complete all as specified and directed.

Supply and drawing of UTP 4 pair CAT 6 LAN cable in the surface/ recessed steel/ PVC conduit as required.

On site LLDPE septic tank designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 in foundation 150 mm thick, vent shaft, connection etc. complete for 05 users complete all as specified and directed.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including interceptiing chamber and screen chamber made of brick masonary in CM,RCC cover sla in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8M dia X 3.0 M effective depth complete all as specified and shown on drawing.

Supply,laying ,jointing and testing in repair of Cable XLPE insulated screened PVC bedded,galvanized steel strip or wire armoured,electric power cables(heavy duty) 1100 volts grade with stranded aluminium conducter of size 16 sqmm 4 core, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts including cable gland of suitable sizes and aluminium lugs for connection,complete all as specified and directed.Note:- Excavation,earthwork,sand cushioning, brick protection shall be measured & paid separately complete all as specified and directed.

Total amount of Sch 'A' Part-IX (Internal Water Supply) brought forward from srl page No-34

Supply and fixing in replacement LT over head lines on existing cable poles with XLPE insulated AB Cable 2x25 Sqmm and messenger of 1x25 sqmm including all joining kits, steel hook, insulator, suspension clamp, rubber insert nut, bolts etc complete all as specified and direced.

15mm thick rendering in cement mortar 1:4 on brick work surf

ace on wall, finished even & smooth without using extra cement including with WPC as per manufacturer,s instructions complete all as specified and directed. Note:- WPC shall be measured and paid seperately.

10mm thick rendering in cement mortar 1:6 on brick or concrete surface on wall including finishing surface even & smooth without using extra cement complete all as specified and directed.

Demolition of Brick work or stone/boulder masonry, built in Cement Mortar or cement lime mortar incl all quions, arches, pillars etc. complete all as specified and directed.

5 mm thick rendering in CM 1:3 on fair faces of ceiling concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Brick work with old size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed

Cement concrete 1:2:4, type B1 using 20 mm graded stone agg as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, copings, kneelers, apex stones, bed plates, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

50 mm thick cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in floors, hard standing etc and laid in alternate bays complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of bitumen 85/25 grade and three part of sand by weight complete all as specified and directed

Applying two coats of cement base paint on walls over a coat of primer including preparation of new plastered or un-plastered surfaces of wall complete all as specified and as directed.

Preparation of old plastered surface of wall and applying one coat of oil emulsion distemper of approved tints complete all as specified and directed by Engineer-in-Charge.

Preparing new plastered surface and applying three coat of white wash on ceiling complete all as specified and and directed

Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed.

Taking down Shutters of any description exc exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed.

Preparation of newly plastered surfaces on walls and applying two coats of oil emulsion distemper over a coat of 1mm thick putty complete all as specified and directed.

Factory made second class hard wood plain framed panelled shutter (Two panel) with lock rail and pannel of 9mm thicks BWP commercial ply or 12mm veneered particle board with commercial vereered on both faces, the size of rails and style as per IS-1003 (Part-I) kiln seasond and chemically pressure treated, 35mm thick complete all as specified and directed.

Second class hard wood 35mm thick glazed and gauged skeleton shutter factory made without sash bars open rebated and prepared to receive glass/gauge etc. top, bottom and lock rail, styles, edges of framing champhered or rounded fitted with cut and mitered wooden beads for securing glass/gauge etc; size of members of shutters supplied and fitted to chowkats complete all as specified and directed

Preparation of old decorated wooden surfaces of any description, not otherwise described over 10cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise specified and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

140 mm long floor door stopper of aluminium alloy body and tongue , anodised ,with hard drawn steel spring ,fixed in floor complete all as specified and directed

Mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and including welding complete all as specified and as directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and double side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for double side prelam PVC sheet to be fitted with M.S. frame welded/ sealed to the stile and rails feathered at edges with suitable PVC sheet beading, and jointed togethher with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Extruded aluminum alloy handle fabricated type anodized, 150mm size complete all as specified and directed

Steel window/ ventilator glazed and gauged (combination) with side hung/ top hung shutters incl box type / projecting type hinges, and steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame complete incl necessary cooler arrangement in window & guard bars all as per sample kept at GE Office complete all as specified and directed by Engr-in-Charge.

100mm size SS butt hinges and fixed to PVC frame /Wooden Frame and angle iron frame by necessary welding complete all as directed and as specified.

200 mm long aluminium barrel tower bolts stove enamelled black, with bright bolt and fixed complete all as specified and directed

Aluminum anodized barrel tower bolts extruded section, 150mm size complete all as specified and directed

Solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet reinforced with ms square tube suppling and fixing in opening as per specification & drawing.

300 mm long aluminium sliding door bolt, anodised,with hasp,staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

Taking up or down 15mm bore steel tubing & connection including cleaning for or removal from site complete all as specified and as directed.

Taking up or down 20mm bore steel tubing & connection including cleaning for or removal from site complete all as specified and as directed.

Supply and fix in repair chromium plated swivel shower roses with or without swivel joints, for fixing with 15mm pipe fixed complete all as specified and as directed.

15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length all as specified and directed by Engr-in-charge.

Supply and fixing in repair brass CP wall mixer 2 in 1 with provisiion of overhead shower suitable for 15mm bore pipe complete all as specified and directed

Supply and fixing in repair 15mm dia Pillar taps,fancy type, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Providing edge moulding to 18-20mm thick stone of counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over, laid over cement screed base , jointed and pointed with grey cement slurry mixed with pigment over 20mm thick cement mortar 1:6 screed bed to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : Work will be in patches or in bulk

Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10 mm thick cement plaster 1:3 jointed and pointed with grey cement slurry mxed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and as directed.

20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge.

Supply and fix in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap and including plastic water closet seat cover with flat bottom and MS Chromium plated hinge divice complete all as specified and as directed .

Supply and fix in repair High or low level PVC valveless, syphonic action type, flushing cistern, 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any as specified and as directed.

Supply and fix in repair health faucet (ABS) body mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in positions complete in all respect as specified

Grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gms) complete in all respect all as specified.

Toilet paper holder , CP, box type complete all as directed.

Supply and fix in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repair tubular towel rail, brass cromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed Engrs-In Charge.

Supply and fix in repair 15 mm dia bib tap,fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

Supply and fix in repair, Stop valve/angle valve cast copper alloy, chromium plated with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed in repair complete, all as specified.

Supply and fix in repair 15mm bore dia Concealed Stop valve , brass CP (fancy type, chromium plated with long shank) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

Supply and fix in repair Vitreous china wash hand basin, white flat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand all as specified and directed.

Supply and fix in repair 32 mm bore waste fittings, brass, chromium plated for sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete.

Supply and fix in repair PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified.

Preparation of old decorated steel surfaces of any description, not otherwise described over 10 Cm width & girth and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

Preparation of new or previously untreated steel or iron surfaces of any description, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing in repairs, Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as spesified and directed .

Supply and fixing in repairs 20 mm bore, Ball brass valves, high pressure, with polythene float and fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply and fixing in repair for PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors all as spd and directed.

Supply and fixing in repair for PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors all as spd and directed.

Supply and fixing in repair 110mm bore PVC (SWR) bends any radius all as specified and directed.

Supply and fixing in repair 110mm bore PVC (SWR) branch piece, double (double Y) equal or unequal all as specified and directed.

Supply and fixing in repair PVC floor trap with grating including jointing with solvent cement to waste pipe 75 mm dia.

Taking down exsting roof treatment of any description in any condition including removing of cement plaster of concrete of any description from the roof surfaces and removing all the debris to a distance n exc 100m and roughening surfaces, sweeping clean and washing down with water to remove dust etc and applying evenly cement slurry at the rate of 3 kg/sqm over cleaned surfaces and providing 10mm thick cement screed in CM 1:4, finished surface even and smooth, after that cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying one coat of industiral bituminious primer at the rate of 0.40ltr /sqm over the plastered surfaces of roof an

Supply and fixing in repair 75mm bore PVC (SWR) vent cowl suitable for pipes complete all as specified and directed.

d applying a coat of hot bitumen of grade 85/25 heating to working temperature of 180 Deg C @ 1.2kg/sqm then applying APP based polymeric membrane minimum weighing 3.60Kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less that 150 gms/sqm) laid with 75 mm side overlap and 150 mm overlap primed surfaces by forced application as per manufactures instructions and applying a coat of idustrial bitumen 85/25 grade @ 1.20Kg/sqm blinded with dry sand 0.50Kg/sqmcomplete all as specified and directed.

Supply and fixing in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed..

Glazed ceramic coloured tiles of size 300x200x7mm / 450 mm x 350 mm x 7mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement plaster in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.

Taking down cement plaster from brick walls hacking for keys & scrubbing down with water including raking out joints ,as in patches complete all as specified and directed.

Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n.exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with & incl 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed.

25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub base and flooring, etc.complete all as specified and directed.

B/R Portion Demolition of cement concrete in any de

Taking down carefully copper/aluminium point wiring for light, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose, celing fan etc complete. complete all as specified and directed.

Supply and fix in repair Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane fixed complete all as specified.

One light/Fan point controlled by one switch complete all as specified and as directed.

One 5 pin, 6 A socket outlet on the independent board. Complete all as specified and directed.

One 5 pin, 6 A socket outlet on the same board complete all as specified and as directed.

One light point controlled by two numbers two way switches complete all as specified and as directed.

Each Point

Supply and fixing for 1X20 watt LED ceiling/wall mounted lighting fixture with lamp lumen not less than 2100 lumen polycarbonate, environemental friendly, energy effecieint fixed to wall/ceiling & connecting upto ceiling rose with three core twisted flexible 1.5 sqmm PVC copper conductor cable with earthing complete all as specified and as directed.

Piano type switch, 2 way, 6 Amps, flush type, complete all as specified and as directed

Piano type bell push, 1 way,6 Amps, flush type, complete all as specified and as directed.

Call Bell, ding dong type suitable for 230 / 240 volts AC 50 Hz all as specified and as directed.

Point wiring with two single core, 1.5 Sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm (nominal area) size copper conductor cable, as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including concealled PVC conduit of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, Bend, PVC Conduits for crossisng etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc for the followings points:-

Ceiling rose, 3 terminal, surface bakelite 65 x 50mm complete all as specified and as directed.

One bell point controlled by two way switches complete all as specified and directed.

Supply and fix in replacement ceiling fan of 1200 mm sweep, 230 V, 50 hz, min air delivery 210 CFM with service value with brussless direct current motor (BLDC) including all connecting accessories and step type regulator of 5 steps, connecting with suitable flexible electric wire complete all as directed by engineer-in-charge.

Switch socket combination 5 pin, 6 Amps, flush type complete all as specified and as directed.

Piano type switch, 1 way, 5/6 Amps, flush type, complete all as specified and as directed

Earthing complete with galvanized Steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 meters below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and incl galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by GI protection pipe light grade 15mm dia connected to main earth wire on pole or controll board GI pipe light grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1 40mm yhick Precast RCC -25 cover reincorced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50m complete all as sprecified and shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

All as per item No 14.02 here-in-before but with two 2.5 sqmm size cables as phase and neutral and one 2.5 sqmm size cable as earth continuity conductor for one 15/20 Amps socket outlet independent complete all as specified and as directed.

Excavation in trenches n.exc 1.5 M wide and n.exc 1.50M in depth for taking up or laying of under ground cable in soft/loose soil and getting out complete all as specified and directed.

Switch socket combination 2 in 1, 5 and 15/16 Amps, flush type complete all as specified and directed.

Each Set

Removal excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all, as specified and directed by Engr-in-Charge.

Returning, filling in and including spreading, levelling,watering and well ramming in layers not exceeding 25 cm thick. complete all as specified and directed.

Supply and fix in repair for Decorative wall light fixture gold finish fixture with white glass diffuser suitable for 7.5 W LED filament lamp E27 Including bulb complete

Sand cushioning to under ground cable providing with a layer of 8 cm thick before laying of cable and 15 cm after laying of cable in trenches, hand punning complete all as specified and directed.

Street light bracket made out of GI tubing 40mm bore, light grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of F.I. 50 x 6mm with MS bolts, nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint complete all as specified and directed.

Sub class B, well burnt bricks locally avaiblable best quality, laid flat with width equal to length of brick for protection of under ground cable complete all as specified and directed at site.

MCB SPN 40 Amps 240V, "C' series complete all as specified and directed.

MCB single pole 6 to 32 Amps, 10 KA, "C' series complete all as specified and directed.

MCB SPN 63 Amps 240V, "C' series complete all as specified and directed.

Supply and fix in replacement TPN DB 4-ways, IP 43 - IK 09 with metal double door (MCCB as incomer) suitable for surface/flush mounting as per site requirement with copper bus bar, with neutral bar, earth bar and cable ties for cable arrangement, fully insulated bus bar and neutral bar, door earthing, corner shield for better protection, pan assembly confirming to IS 8623 including making fixing arrangement with existing wall complete all as specified and as directed.

MCCB 63 Amps 4 pole 415 volts 25 kA Ics=75% Icu including extended terminals all as specified and directed

Supply and fixing Inverter LED batten 20W with square profile and polycarbonate channel, lithium Ion battery with charging time 8 Hours-10 Hours and backup time upto 4 Hours with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Lamp holder insulated body complete all as specified and as directed.

LED Lamp, CDL, 9/10 watt, B22 base complete all as specified and as directed.

Supply and fix in replacement connecting,testing and commissioning of street light fitting 35 watt LED, IP-65 protection, single peice pressure die cast aluminium housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and control gear compartment with high voltage surge protection device up to 5 KV, prewired including three core PVC insulated , sheathed 1.5 sqmm multistranded aluminium conductor with 2 core 1.5 sqmm pvc insulated cable from junction box to light fitting complete all as specified.

Supply and fix in replacement of old U/S DB's with wooden board / boxes and S&F distribution board , IP 43 in sheet metal enclosure dully flushed in wall, when MCB to be used with 200 Amps rated copper bus bar confirming to relevant IS SPN (04 Way double door) Make: Legrand or equivalent in ABB/Schneider and making good the disturbed surface all as directed by Engg-in-charge.

Galvanised iron tubes light grade of size 40 mm with all fitting and fixed complete on roof top complete all as specified and as directed.